... have tried everything to restart my ipod touch. stuck on that screen with the apple logo
My Ipod Touch suddenly stopped working. It hadtrouble starting up – then suddenly turned on after a few minutes of pushingthe start button. The next time I turned it off, it never started back up. Symptoms:
It is stuck on the apple logo screen (with thecircle of moving bars – as if it is waiting or doing something) and never moveson from this.
When I plug it in and try to restore it:
Whensyncing with my back-up, I get the error: ITunes could not restore it becausean error occurred
WhenI set up a new Ipod, everything downloads. (apps, music etc)
It looks like it is fixed, butwhen I unplug it and try to get it to work, it is still stuck in the apple logoscreen – same as above.
I have also updated all of the software. Still - no go!
When it is plugged in to mycomputer, I am able to play music and see the items in the ipod. Through this,I have even updated my software. This all works .. but that screen with theapple logo does not go away and I just cannot access it manually through the touchscreen or ipod buttons.
Who can help me?
Did you also try to connect in recovery mode? http://support.apple.com/kb/HT1808
Similar Messages
-
i have an ipod touch 3rd gen.I used the function of erasing all contents and settings and now i am stuck with this screen showing the apple logo and the loading sign for the past 17 hours.CAN SOMEONE PLEASE HELP!!!!!!!!!!!!
Hold down the on/off button and the home button for 20 to 30 sec, when the iPod starts and the Apple logo is on the screen release the on/off button but continue to hold the home button until you see the plug into iTunes screen. Connect the iPod to iTunes and you should be good to go.
-
Refurbished iPod touch 3rd gen won't start. Just got it today to replace my broken one. It freezes at the screen with the apple logo, then flashes off and tries to restart again. Help!
I have tried holding the power home button but all that does is turn it off. When I try to start it again it goes into the same loop.
-
I have an old ipod touch which won't go past the Apple logo, all it does is show me a loading symbol, but will go no further, i have tried restoring it and i have been successful. It connects and is recognised by my itunes and computer, but still after restoring it, it just won't get passed the logo..what can i do? what is the problem?
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
ipod touch will not restore, only gives the apple logo....i have tried every trouble shot... and keep getting the same results.
Maybe here:
http://www.windowserrorhelps.com/itunes-error-11-how-can-i-fix-itunes-error-11-i nstantly
Is the iPod jailbroken? -
I turned off my iPod touch and when I tried to turn it back on, it won't load and just sits on the black screen with the Apple logo.... HELP!!!):
Try a Reset...
Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Release the Buttons.
Restart / Reset
http://support.apple.com/kb/ht1430 -
My touch is frozen on a black screen with the apple logo and a load bar, nothing works, tried resetting and everything, any suggestions?
In that case....if you have Apple Care, give support a call - otherwise, walk it into the nearest Apple Store.
Good luck. -
I have a 4th generation 8GB iPod nano and it will not progress past the blank screen with the white apple logo on it. I have charged it fully and tried to restart it by pressing and holding the menu buttons for 3-7 seconds. The devices screen will turn off and then, after a couple of seconds, the screen with the Apple logo will appear again. This screen will remain lit until the iPod runs out of battery again. I have tried plugging it into my Macbook Pro. I have the newest versions of iTunes software and OS X Mavericks. The computer will not recognize the iPod and the device will not show up in the computers list of devices. I looked up the troubleshooting for the device and found out how to put the device into disk mode. I followed the intructions but the iPod would not go into disk mode. The screen still displayed the Apple logo and would not set into disk mode. I fear that I have run out of options. I have come to this forum in hopes that I can still salvage my device. If there is anything I can do, please loet me know so I can try it. If not, I am affraid I will have to go to an Apple store of authorized retailer and have it repaired or replaced.
Try manually connecting the device to your PC in Disk Mode and then restoring it iTunes.
From http://support.apple.com/kb/HT1363
Putting iPod devices with a Click Wheel into Disk Mode
If necessary, verify that your iPod has a Click Wheel.
Before placing the iPod into Disk Mode, verify that it is charged.
Toggle the Hold switch on and off (set it to Hold, then turn it off again.)
Press and hold the Menu and Select buttons for at least six seconds, until the Apple logo appears.
When the Apple logo appears, release the Menu and Select buttons and immediately press and hold the Select and the Play/Pause buttons until the Disk Mode screen appears.
Connect the iPod to your computer; the screen on the iPod will should say "Do not disconnect".
If you are having difficulty putting your iPod into Disk Mode, set it on a flat surface. Make sure that the finger pressing the Select button is not touching the Click Wheel. Also make sure that you are pressing the Play/Pause button toward the outside of the Click Wheel and not near the center. If you are still unable to put your iPod into Disk Mode, use one finger from one hand to press the Select button, and one finger from the other hand to press the Play/Pause button.
B-rock -
I Mac freeze: When powered on all I get is a blank white screen with the apple logo. No "beach ball" nothing more. Tried all the usual restarts. Help?
Tried all the usual restarts. Help?
Care to share?
Please detail ALL you have done so far in the way of troubleshooting? Need this info to avoid the been there done that scenarios.
===========
Your profile is a complete blank!!!!
When posting in Apple Communties/Forums/Message Boards.......It would help us to know which Mac model you have, which OS & version you're using, how much RAM, etc. You can have this info displayed on the bottom of every post by completing your system profile and filling in the information asked for.
CLICKY CLICK-----> Help us to help you on these forums
***This will help in providing you with the proper and/or correct solutions.*** -
I tried to reset my iphone 5 from the phone and not a computer. I have had a blank screen with the apple logo and a full progress bar. I can not get my phone to restart. What can I do?
Sorry i meant iOs5 to ios 5.0.1
-
What do i do if my ipod touch i stuck on a screen with the itunes logo and USB cord?
my ipod is stuck on a screen with the itunes logog and the USB cord picture and everytime i go on itunes to fix it it wont work because i cant unlock the ipod. i have also tried rebooting it but it just makes noise like a camera taking a picture. I need help because i cant find out whats wrong. PLEASE!!
plug your ipod into itunes...it may not do anything plugging it into your own itunes so you may want to try plugging it into someone elses to save the trouble. I had this same problem last week plugged it into my dads ipod and it worked (:
-
i've tried to set up a new user on a mac book pro and i restarted it to create the new account but now all i can get is a white screen with the apple logo and the loading symbol what can i do ?
Look at this support article:
http://support.apple.com/kb/ts2570
Ciao. -
After using itunes to restore it i turned my ipod touch on and it stayed on the apple logo for a few minutes then it would change to a spinning wheel on a black screen then the screen would turn white and the process will repeat. I can still put it in dfu mode and recovery mode but they don't help. So hopefully someone in this community can help me. And this all started when i updated it to ios 6.1.3 from 6.1.2. and also my computer and itunes dont recognize it
See if you missed anything here:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
i didn't close my mac air down properly and when i tried to use it, the screen was frozen. I turned it off and restarted it, and the grey screen with the apple logo appear and the circle just keeps spinning. Can you advise?
Try resetting the SMC
Intel-based Macs: Resetting the System Management Controller (SMC) -
My ipod touch 4th generation will not leave the apple logo sign
my ipod touch 4th generation will not leave the apple logo sign what do i do to turn it on and work ? please help
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar
Maybe you are looking for
-
Macbook Pro w/ Lion 10.7.2 & Windows 7 Shared Printer (Lexmark X5650)
I just recently purchased a MacBook Pro with Lion OS 10.7.2 for my wife and have been trying to connect her Macbook to my Lexmark X5650 Printer that is connected to my Windows 7 Professional PC. Tried everything with no success. Any ideas? I have
-
Shel life experation date for material and customer
we will need a specify minimum Shelf Life Expiration Date/Production Date for a material and customer. example: The customer X for material Y require 200 days for minimum shelf life expiration. This means we send this material his shelf life expira
-
hi I am trying work with ejb and jsp's using WLS 6.1 but nothing seems to work , with out using jsp if i am invoking ejb's by writing a simple client its working fine well here is what i have done
-
a new icon popped up on my desktop- looks like an excel file. cant open , delete or move it. named E8E80510 never seen this before- didnt open anything called this. what is it??? anyone seen this at all?
-
Are Any Applications Included On The OSX 10.4.3 DVD ?
My eMac came with Panther installed. I later upgraded it with OSX 10.4.3. (YES! There is such a DVD!) Now I want to completely erase my HD and reinstall Tiger. The erasure is necessary because I want to change the partitioning of the HD etc. I could