Have updated to XCode 5.0.2 but clang still on 4.1
Hi,
I have updated XCode from the app store to 5.0.2 but if I enter clang --version at the command line I get the following
Apple clang version 4.1 (tags/Apple/clang-421.11.65) (based on LLVM 3.1svn)
Target: x86_64-apple-darwin12.5.0
Thread model: posix
From what I understand the latest version of clang should be newer, is that correct?
Thanks
Andy
MaryamImani wrote:
Hi Andy,
I have the same problem. Where did you get the command line tools from exactly? I wento into preferences->downloads.. but there are not comman line tools options. I can see components and documentations. How can I solve this issue?
Thanks for your help in advance.
Maryam
Do you have Mavericks? Things are different on Mavericks.
Similar Messages
-
I have not been able to access itunes store for over a week now. I keep getting error -1202. I have updated to latest version of itunes but problem still exists. Any tips?
See this one
https://discussions.apple.com/thread/3742260?start=0&tstart=0 -
I have updated my itunes to 10.6 and I still can't connect to itunes
Could you walk us through what happens when you try to connect to the Store, please?
-
Hi, the title says it all
I've been trying to find out on the Adobe site how to uninstall CS3 Design Premium and then reinstall the original software in the hope that this will eliminate the crashing problem, which only started yesterday.
You're help will be very much appreciated.
AlisonRun the cleaner tool and reinstall.
Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6
Just be aware that none of this will matter if you are using a newer version of e.g. Acrobat that by ways of updates may introduce/ have introduced an incompatible version of one of the PDF libraries commonly shared and used by all Adobe programs. you have to tread lightly and be careful...
Mylenium -
i have updated my iphone 5s to iOS8 but it has my old icloud account, how can i change the icloud email address as i can not get passed this page??
I do not know the log in details and no longer have that icloud email address !!
please help :-(That's Activation Lock. You will need to remember the Apple ID and password you used to set up the phone.
If you can't remember them, you can go to iforgot.apple.com to try to recover the information.
If you are the original owner of the phone & have proof of purchase, you can try calling Apple to see if they can assist also.
~Lyssa -
I have updated my iPhone 4s to iOS7 but when i connect it to itunes on my PC it give me a msg to restore your iPhone in summary tab, Please help m using win 7 and updated itunes.
What is showing on the screen of the iPhone?
Does iTunes say the iPhone is in recovery mode? -
In the past I was using Photoshop 7 to make Web Photo Gallery. My friend could right click on the pictures from my website and save it in their computer.
Recently I have bought and registered your Lightroom 5 and have updated it to 5.6. But can not program it to create Photo Web Galleries that after uploading to my website would allow my friends to down load the pictures from the album to their computer. How could I do it? Please step by step. Thank you M. Mehdi AkhaveinAre you producing HTML galleries with Lightroom (not Flash galleries)?
Lightroom Help | Create web galleries in Lightroom -
I updated ipad 4.3 to io7 but now when I go to set up it keeps asking me to restore - I have done this from itunes several times but it still gets stuck at this point in set up - help!
All media and apps should be in iTunes on the computer. Simply select the content desired to sync to the device and sync it.
FYI, backups have never included media or apps.
Downloading past purchases from iTunes -
i have updated my ios 5 to 6 but when the updating aur dowloading has comleted and i turned on the phone it showed a sign to connect to the itunes and then i connecte to itunes but i.tunes showed error that the server could not be contacted....now what i can do to resolve the problem????
has your phone been jailbroken?
-
I have updated my Apple ID and password, but am now getting a message that iCloud can't sync. On my iPod Touch, it still is showing up as my old Apple ID/email address.
Thanks! I found an earlier post making reference to deleting the account and then signing back in with the new info -- basically the same idea. Thanks for your help!
-
I have updated my IPhone 4s to ios6, but for some reason it didn't install Siri with the update, is there any way I can install it onto my IPhone without jail breaking the phone?
Macca_astles01 wrote:
It is an iPhone 4s, it has voice control but it's not Siri, is there any way I can install it?
It cannot be installed. It comes pre-installed on every iPhone 4S and later. Maybe it was disabled under Settings > General > Restrictions.
Courcoul wrote:
Wasn't SIRI one of the gee-wiz doodads introduced with iOS 6? Cause my boss' 4s w/iOS 5 certainly does NOT have it. And on my i5, the Spanish-speaking SIRI I got turned out female, with all the foibles and vicissitudes....
iOS 6 only added support for the 3rd generation iPad. It was always on the iPhone 4S. Then the same goes for your boss: Maybe disabled in restrictions, or maybe actually an iPhone 4. -
How to Create a Bootable Flash Drive to do a clean install of Lion. I have tried to use the InstallESD.dmg but it still will not do a clean install so that I do not have to do a reinstall from the Recovery (That just re downloads and takes over 6 hours)?
The system I'm have is a Mac-mini that had SL on it and no SuperDrive. I have also call Apple Support and they have really have not been to much help over 1st did my up grade to Lion and Installed the Lion Server.... it lost my SSL that I paid for and kill almost on of my server setting, plus kill all my web servers (using apache vhosts), and not to say the LDAP will even let remote users login to your laptops.
PS: There is no way that I'm going to buy a Install USB from Apple... They have over billed me over $300.00 because the Apps Store still has bugs (Glad I did not write that App/Service)
If there is anyone that can give in the information to create a USB install stick, I would be very thinkful.Here you are bro, courtesy of "softpedia.com"....brilliant site!!!
If you ever had problems with your Mac OS X installation you know that the first thing you should do is to check the startup volume using Disk Utility.
After the check has ended and, if the errors exceed a certain level of seriousness, the Disk Utility application will require you to restart your Mac and use its Mac OS X Install disc counterpart.
Other users may have to reinstall OS X altogether, but will find, or already know, that their SuperDrive (a CD/DVD reader and write combo drive) is not functioning properly and it will not be able to read the Install disc.
Although this might happen to Mac OS X Leopard users due to faultyhardware, the vast majority of problematic SuperDrives will be encountered inside Snow Leopard running Macs.
This is due to the updated SuperDrive firmware included in either the Install disc or the software updates one has to install to reach the latest version of OS X, namely 10.6.6.
This can be fixed by flashing the SuperDrive’s stock firmware using free command line tools that one can find for free online (I will write about this process also, but at a later time because this article only focuses on allowing you to create your own alternative USB boot disc).
If you are reading this last bit of information with skepticism, than you should know that it happened to me too. Despite all my tries to make it work properly, the SuperDrive kept on munching any inserted DVDs and just popped them out in about twenty seconds.
The workaround to this issue was to create my own Leopard bootable USB memory stick. I am not suggesting a Snow Leopard bootable stick mainly because there are lots of users that have decided to buy the cheaper, Upgrade version, which I have not tested and, therefore, I’m not sure if it will work properly once written to a USB disk.
And now, here are the exact steps you should follow in order to obtain a fully bootable Leopard (or Lion) Install disc.
Step 1 (If you already have the Leopard install disc DMG file you can skip to Step 2)
Launch Disk Utility (you can find it inside /Applications/Utilities). Here select the Leopard Install disc in the list of drives on the left and click on the New Image menu entry at the top of the window. A save message will appear where you will have to select the Desktop as a destination.
Step 2
After Disk Utility has finished creating the Leopard DMG, insert your USB stick and erase all data and reformat the disk. To do this select the USB in the list of drives on the left and, after clicking on the Erase tab on the right side of the window, choose the Mac OS Extended (Journaled) format and click the Erase button beneath.
Step 3
After the USB has been reformatted, download the SuperDuper app from HERE and launch it. Once SuperDuper starts, you will only have to select the DMG in the Copy drop-down menu, your USB memory stick on the right and hit the “Copy Now” button.
One can also use Disk Utility for this task but creating a bootable USB stick failed 2 out 4 times when copying the DMG to the stick (with the exact same settings each time). Creating the bootable stick using SuperDuper proved to be the perfect way to do it because it worked each of the 4 times I tested it.
The steps above can also be used to create a bootable Mac OS X Lion USB by using the InstallESD.dmg image you can find inside the Lion installer (named “Install Mac OS X Lion.app”) downloaded from the Mac App Store in the /Applications folder.
To locate the InstallESD.dmg right click the Lion installer, select the “Show Package Contents” entry, go inside the “Contents” folder, and from there into the “SharedSupport” folder. Inside this folder you can find the InstallESD.dmg you can use to create your own bootable Mac OS X Lion USB stick. To do so, go to the third step described above and use the InstallESD.dmg as the DMG to be copied to your USB disc.
That’s it! Once the process ends you will have a fully bootable Leopard (or Lion) USB disk that you can use as an alternative to the Apple’s DVD Install disc that comes bundled with all Macs.
To use your newly created bootable disk you will have to restart the Mac, press and hold the OPTION key until the StartupManager appears. Here, select the Mac OS X Install disk using your keyboard arrows and press return to start from the selected drive. -
I have xcode 4.3.2 and iOS simulator Version 5.1 (272.21). But this course is on iOS 6. If I upgrade my iOS from 5.1 to 6.0 then do I have to upgrade my Xcode also? So my question is all my old Xcode project which I have tried with Xcode 4.3.2 will be still there because I do not want to destroy them.
I have a MacBook Pro (Software Mac OS X Lion 10.7.5 (11G63b). Please let me know about upgrading iOS version so that I will be able to do the class project.To program for iOS 6, you need iOS 6 SDK. You need to download Xcode 4.5.x. But don't worry. All your previous projects are still alive and you are able to open them in the new Xcode.
-
Updated to IOS 6.1.1 but battery still draining quickly but not ask quick than 6.1
Updated to IOS 6.1.1 but battery still draining quickly but not ask quick than 6.1
Do you have an Exchange/ActivSync email account?
-
iphone 4: Home Button Not Working. The home button only works when it is connected to iTunes, once i disconnet it does not work, i have tried a restore to factory settings but it still is not working. Any suggestions?
Apple, as I said, does not repair your iPhone. All hardware service issues are handled by replacing the unit. So they can't handle the home-button issue without also addressing the issue of the cracked screen, for which they'll almost certainly charge you. But you can make an appointment at an Apple Store or call Apple tech support and plead your case.
Regards.
Maybe you are looking for
-
Adding new event in Month view
I had a problem in ical two days ago and now I can't double click on one day in month view to start a new event. I have to go to the tool bar or press the "+" Why did I lose this nifty feature? I have Lion 10.7.4
-
EPS files from CS5.5 to QuarkXPress 9
I am trying to help someone working in a PC-only environment. Using InDesign CS5.5, we do Export as EPS and specify Level 2 (or 3, made no difference) PostScript, Grayscale and Binary. If then create a new document in QuarkXPress 9, draw a picture bo
-
Web service problem CX_SY_CONVERSION_NO_RAW
I work with the "CustomerCRMCreateRequestConfirmation_In" in the tool soapUI I used this example to create an new Business Partner: Example how to create a business partner (of type organization/ corporate account) with internal numbering, one addres
-
I think I have read enough now to understand most of the work arounds that I would have to do if I use iWeb to redo my modeling agency website, but just wanna check one more time with the experts: 1. If I have a thumbnail pic link to a larger version
-
hi i would like to ask you,why when i save images for Internet (for my web portfolio) from Photoshop thought Save for Web and import them in Flash they appear with rough ends ,not straight and clear as in the original version ,please? I m saving them