Have used Firefox for a long time and now it will not boot up and I get message saying cannot initialize security component. Have uninstalled and re-installed Yahoo optimized 5 version and still the same.
The only thing I have done different in the past few days is to install trial version of Bitdefender Total Security and I used the PC tune-up feature for PC clean-up and registry cleaner. That seems to be the point I could not loner use Firefox.
I have Firefox 3.6.6, and now that Firefox 4.0 is available, it crashes constantly. Sometimes less than 5 minutes after I open it. I have a Mac 10.4.11, so Firefox 4.0 isn't an option for me. When I asked Ff to check my plug-ins it said there was an error and to check back later. Twice.
Because I didn't have any (any) problems with my Ff before the upgrade became available, I am forced to question if Ff has done something to make the earlier version crash so you'll upgrade, but I can't afford to upgrade my Mac right now.
In the meantime, I do need a browser that works! I dislike Safari, Chrome is also not available on Mac 10.4.11, and Explorer is just plain not available on Mac.
Do you have any suggestions on how to fix my Firefox 3.6.6?
Ty
Similar Messages
-
I have been using firefox for a long time, today when i tried to launch firefox i recieved "Firefox is configured to use a proxy server that is refusing connections." i dont know how to fix this. I didnt change any settings, im the only person who uses this computer
You can find the connection settings in Tools > Options > Advanced : Network : Connection<br />
If you do not need to use a proxy to connect to internet then select "No Proxy"
See "Firefox connection settings":
* [[Firefox cannot load websites but other programs can]] -
Hi out there. To capture a screen shot one uses: Command-Shift-3 or 4. I have done this for a long time. Now suddenly neither screen shot command works anymore. Suggestions how to get this useful function back? Thanks, Georgx
Command-Shift-3 and 4 works just fine on several Macs that I have here.
Try restarting your Mac....or post in the specific support area for your Mac model....for more advice.
https://discussions.apple.com/index.jspa -
I have reset my ipad using General > Reset > Erase All Content and Settings. And now it will not boot. All i see on screen is the Apple logo. What do i do?
When you restore, you can restore to factory settings or to a backup. Restoring to factory settings removes everything and takes you back to out of the box status and you start all over again. Restoring from your backup will replace all of your app data, bookmarks, email settings and things like that. You still may need to sync all of your purchased apps and music, photos and so on back to the iPad.
I assume you want to restore from your backup to put all of you data back on the device so connect the iPad to your computer, launch iTunes, right click on the device name on the left side under the devices heading and select restore from backup. After you restore from your backup, make sure that you sync all of your other content with iTunes. -
My iphone will not turn on.... it froze earlier today and now it will not turn on all i get is a black screen with the apple symbol every once in awhile... also it will not connect to my computer so i can reset it to factory settings
Sammyhunter lets get you back in action! Has there been any physical/water damage to the device? Try pressing and holding the home and power button together. Once the Apple symbol appears release both buttons. Keep us posted!
AshleyS_VZW
Follow us on Twitter @VZWSupport -
My iPad will not back up to cloud inspite of trying everything mentioned. I have more than enough space on device. It was last backed-up on 12-12-12. Have never had this problem before. Keep getting messages that it needs backing up. Have tried multiple manual back-ups for at least 24 hrs or more, but back-up will not complete. Help!
If you get the error "Backup not successful" and you've tried deleting the last backup and trying to back up manually without luck, try the following test: Go to...
Settings>iCloud>Storage & Backup>manage Storage, tap your device name in the Backups section, then look under Backup options. Turn off all apps from backup and then do a manual backup. If that doesn't work, then this post will not help. If the backup works, then go back to the app list and turn some on and try another backup. If successful, keep repeating these steps. If it fails at some point, then try to zero in on the one app that seems to make the backup fail. (I had this problem and found one app failing, probably due to a corrupt data file.)
This process will take time, but if a backup works with no app data being used but clearly fails with the original settings, then somewhere in the mix of apps is a "bad" one. -
Adobe installed an update, which restarted my desktop pc. After restarting I was unable to open Firefox browser. So, I clicked on Firefox, and then run as... first I tried running as... and chose my name. Firefox browser still would not open. Then I chose administrator which opened Firefox browser, but, as a new Firefox installation. It did contain add-ons, but not book marks, history, downloads or preferences. Now i have started over from the beginning. Is there any way I can restore lost bookmarks and preferences? Do you think system restore would help?
Are there still JSON backups in the bookmarkbackups folder?
*http://kb.mozillazine.org/Lost_bookmarks
You can use this button to go to the Firefox profile folder:
*Help > Troubleshooting Information > Profile Directory: Show Folder -
My audiobook which I purchased will not download
Hi there Otraveling,
You may find the information in the article below helpful.
iTunes: How to resume interrupted iTunes Store downloads
http://support.apple.com/kb/ht1725
-Griff W. -
I can not connect to my home Wi-fi. I put the wrong passcode in severall times and now it says that I am not able to use my home internet. How do I get back to the place where I can put in the correct passcode and connect. Not sure what to do and really don't want to take my phone back to sprint.
Click the blue button next to the wifi name, then hit Forget Network.
Then try to connect again and use correct password. -
Upgraded Imac to OSX Mavericks and now imac will not boot
Any help on how to go back to previous OS or solve for this?
Try these in order testing your system after each to see if it's back to normal:
1. a. Resetting your Mac's PRAM and NVRAM
b. Intel-based Macs: Resetting the System Management Controller (SMC)
2. Restart the computer in Safe Mode, then restart again, normally. If this doesn't help, then:
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the
COMMAND and R keys until the Utilities menu screen appears. Alternatively, restart the
computer and after the chime press and hold down the OPTION key until the boot manager
screen appears. Select the Recovery HD and click on the downward pointing arrow button.
3. Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the Utilities menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu. Select Restart from the Apple menu.
Reinstall the 10.9.2 update: OS X Mavericks 10.9.2 Update (Combo).
4. Reinstall Lion/Mountain Lion, Mavericks: Reboot from the Recovery HD. Select Reinstall Lion/Mountain Lion, Mavericks from the Utilities menu, and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
Reinstall the 10.9.2 update: OS X Mavericks 10.9.2 Update (Combo). -
I did the latest update to my I pad 2 and lost Safari . I was instructed to switch the Java script on which I did but Safari is still not working properly . how do I get everything back after this software update.
Try a reset: hold down the home button along with the power button until you see the Apple, then let go.
-
So I have used Mozilla for a long time with no problems. All of a sudden I cannot access certain games on facebook. All else works. First uninstalled and reinstalled. Then ran malware program. Still nothing and the games work off IE and Google Chrome. I really like Firefox and would like to be able to go back to it
So I have used Mozilla for a long time with no problems. All of a sudden I cannot access certain games on facebook. All else works. First uninstalled and reinstalled. Then ran malware program. Still nothing and the games work off IE and Google Chrome. I really like Firefox and would like to be able to go back to it
-
My iPhoto often have difficulty in opening without the "repair". Maybe it's because I have almost 2000 pictures! When I initiate repair using Mac for a long time to find and sort faces .... Is it possible to turn off or avoid this feature?
This user has found a "hack" to turn off faces. Several users have reported success with the method. I can't comfirm the method as I've not used it. Use at your own risk.
lopezio
Re: Iphoto 11 -How to turn off faces?
Dec 30, 2013 9:06 AM (in response to mkmichaelmk)
Start of solution:
I did some digging in the prefs of iPhoto and found out the following. This is how you can disable (turn off) Face detection, without deleting faces found so far (just in case you want to restart processing at another time):
1. Quit iPhoto
2. Open Terminal Application (Applications/Utilities/Terminal.app)
3. Type the following (exactly as is):
defaults write com.apple.iPhoto PKFaceDetectionEnabled 0
(then return)
4. - Start iPhoto - Faces stops getting on your nerves...
If you ever need to re-enable faces, just do the same again and replace the 0 with 1.
OT -
The support page is ridiculous, it assumes you already have Firefox and that the install went fine. I am having trouble with an update to Version 4. I have an ibook G4 running OS X. I have used Firefox for years. When I downloaded the update, the Firefox logo thing that you are supposed to drag to the Applications folder has a white circle with a line through it. I have rebooted many times and have updated all other software.
Hello,
I wouldn't trust any Firefox "update" from a non-Mozilla website. Sometimes, unofficial builds contain adware or malware. If you want to use Firefox for AOL do so at your own risk. -
I have had creative suite premium installed on my computer for a long time, but now it states that my computers configuration has changed and needs to be reactivated, but it cannot be activated by internet, and the phone number states that adobe no longer activates by phone. What is the solution to continue to use my program that I have had working on this computer for a long time?
You do not state which version... if CS2 read next
CS2 (and earlier) Activation Server replacement software
http://helpx.adobe.com/x-productkb/policy-pricing/creative-suite-2-activation-end-life.htm l
When you install the special version of PPro2 on a Win7 or Win8 computer, you MAY need to right click the program icon and select WinXP compatibility from the option popup... AND Vista problems https://forums.adobe.com/thread/416347
If not CS2, read next
This is an open forum, not Adobe support... you need Adobe staff to help
Adobe contact information - http://helpx.adobe.com/contact.html
-Select your product and what you need help with
-Click on the blue box "Still need help? Contact us"
Maybe you are looking for
-
Report for open order and shipped qty summary
Dear Folks, Can any one please help me. Report for open order summary Vs shipped quantity what are the related programs to it. throw some light on it.
-
Default Exchange rate type at document type level for parallel currencies
Hi, I have a scenario wherein 2 parallel currencies have been maintained (Grp & index based) against a Co Code and have maintained a default exchange type (Z2) in the Document type settings (OBA7). But when I want to post a foreign currency document,
-
Flash 10.3 download is not registering with Firefox or Mac
The flash website says that 10.3 is most compatible with my computer. After downloading, the only memory of the instalation is a Player Installer on my computer and I can't access or play anything that requires Flash on the internet. Firefox is up to
-
Saving mathML rendered to canvas as PNG
My ultimate goal is to save rendered presentation MathML to a .PNG file. Knowing just enough about programming to be dangerous :-) there may be a better way to do this...I am drawing the equation on a canvas element, then trying to save the canvas el
-
SNOTE reset and re-implement the note
Hi, I'm trying to download the note 1517201 (release 5.0) by SNOTE The system has implemented the prerequisite notes: 1263757 1376396 1454009 But when I implement the 1517201 it sends me a message: Edit objects separately since they cannot be transpo