Have wifi signal, logged in but not connected to internet.

Will not connect to internet.  Worked fine last weekend at home and traveling.  No internet connection this week at a different home location.

Probably your router is not assigning your iPad a valid LAN IP address. You can check this in the network details accessed by touching the ">" to the right of your network name in WiFi. If the IP address starts with 169 then you didn't get an IP address from your router.
Sometimes this problem can be solved by restarting your router by removing power. Also use Settings > General > Reset > Reset network settings on your iPad. Also check to see that you have the latest firmware on your router.

Similar Messages

  • AOL Broadband, will connect to laptop, but not connect to internet explorer. WRT54GS v.6

    I can connect to my wireless network via my laptop, but not to internet explorer. We have changed every setting imaginable and re-set the modem, router many times. We Ip configed, did ping tests, installed and re-installed the card in the laptop. Done all this 4 times with the tech support from Linksys. Finally, I realized it must the wireless router and/or modem configuration. (The laptop works on every other network in town except ours, and has not security settings enabled).
    I have been on customer service calls for 2 weeks, with AOL and linksys and nothing seems to be helping me. I have 2 wireless routers (thought the first was bad, so bought another brand new), and just had a brand new modem installed. Basically, I have brand new equipment.
    The laptop has no security settings and connect to any wireless network in town. It finds the connection to my WRT54GS v.6, but will not connect via internet explorer.
    I want to uninstall and re-install the router. How do I uninstall the router? (I have instruction for re-installation). Also AOL rep told me, to make sure I configure the router to a certain port range. Any ideas as to how to do this?
    Anyone have problems with AOL high speed and linksys router? Has the high speed cable cord coming out of the wall, not ethernet or DSL.
    We have changed the settings in http://192.168.1.1 till I am blue in the face. None of the channels worked, security didn't work, adding the ip address manually to the laptop didn't work. I am getting no error messages. Am trying to get this wireless modem working because I need it. Should have come to this forum first!

    hi..if you want to uninstall the router...the only thing you need to do is hold the reset button down for 30 seconds...
    i m a bit confused here as to why the ISP techs asked you to forward ports on the router...port forwarding is needed for a specific application or a device that is behind the router....
    the mentioned ports are for AOL messenger ( AIM )....and has nothing to do with the modem...anyways , let us work out together on this issue...carry out the steps i mention and you can revert back with the results and your success rate...
    1) connect the computer to the modem and check what ip address you have on the computer ??
    2) go to start -> control panel -> network connections ->
     let me know what other icons you have besides Local Area Connection and Wireless Network Connection..
    3)connect the computer to the router and the router to the modem...
    access the router using http://192.168.1.1 .. let the internet connection type be on DHCP....check the ip address on the status page of the router ui...
    4) if it is 0.0.0.0 , go to setup tab and go to mac address clone subtab , enable it and hit clone..save the settings and do a power cycle...
    5) check whether you have the ip address...if you have the same ip as coming off of the modem..u should be online and if still 0.0.0.0 , then select PPPoE for the internet connection type and enter the username and password...check whether the ip address comes up....if still negative, ensure that the modem is in bridge mode...
    6)if the ip address comes up as 192.168.1.x , change the local ip add of the router to 192.168.2.1 and do a power cycle..
    let me know for any help !!!

  • Computer crashed. Had to rebuild. Everthing loaded and working properly except itunes. Operating System Windows 7, Home Premium. Itunes was downloaded and installed. Itunes will open, but not connect to internet. No itunes store, CD artist, name of songs.

    Computer crashed. Had to rebuild. Everything loaded and is working properly except itunes. Downloaded itunes and installed. Will not connect to internet. Keeps on trying to connet to itunes store, but never connects. If I insert a CD all I get is the track number. No artist or song information. Operating System Windows 7 Home Premium.

    Hello Rachet Jaw,
    Thank you for the details of the issue you are experiencing with iTunes. I found a few articles I suggest for the issue you described.
    If you are getting a white screen when accessing the iTunes Store, I recommend reviewing this article:
    Apple software on Windows: May see performance issues and blank iTunes Store
    http://support.apple.com/kb/TS4123
    If you are still not able to access the store or are getting a different error than just a white screen, I recommend the following articles:
    Can't connect to the iTunes Store
    http://support.apple.com/kb/TS1368
    iTunes: Advanced iTunes Store troubleshooting
    http://support.apple.com/kb/TS3297
    Thank you for using Apple Support Communities.
    Best,
    Sheila M.

  • Connected to airport wifi but not connected to internet

    I am using an airport wifi - time capsule.  The internet works on my Mac which is wired in; however when I try the wifi I can connect to the airport network I made and have used for years but a the network does not connect to the internet.  I have powered down/ restarted and all that typical stuff.  Thoughts?
    I am running Snow Leopard if that matters 

    Ok, this is clear and simple.
    Your TC is wrongly configured. I am not sure if it has been like this for years and you are now adding a computer but the reason it is failing is because you have captured the public IP on the imac which is wired so the wireless computer cannot get an IP address.
    You need to
    1. Power off your cable modem.. I am assuming it is cable service .. if not tell me.
    It needs to go off for 20min or so for the imac to drop the captured public IP.
    2. Reset the TC to factory.. this will not harm your backups.
    The Factory Reset universal
    Unplug your TC/AE. Hold in reset. and power the TC/AE back on..  all without releasing reset and keep holding in for about 10sec. The time is not important.. it is the front LED rapid flashing that indicates you are in factory mode.
    Release reset.
    If it doesn’t flash rapidly you have released reset at some point and try again.
    Be Gentle! Feel the switch click on. It has a positive feel..  add no more pressure after that.
    TC/AE will reboot after a couple of minutes with default factory settings and will wipe out previous configurations.
    No files are deleted on the hard disk.. No reset of the TC deletes files.. to do that you use erase from the airport utility.
    3. Since you are using snow leopard you must be on v5 airport utility.
    The main things to do in the setup is to ensure you set the right settings for internet.
    You are going to share a public IP .. at the moment you are bridged.
    Then just check that the actual connection is set to dhcp.
    Yours will look different ... don't worry about the actual numbers it is the using dhcp that is key.
    Setup the base station name and wireless to create a wireless network.
    eg.. I suggest all names that are short no spaces and pure alphanumeric.
    Just tell us if you run into troubles.

  • IBook G4 that's connected to wifi but not connected to Internet

    I Have a later 2005 model iBook G4 running OS X 10.5.8 Leopard, I'm having trouble connecting to the internet. I am able to connect to my home WiFi network but not able to connect to the internet. How do I fix this?

    The iBook is Capable of 802.11g/n/b using Airport Extreme
    Airport Extreme did not get 'n' coverage until late 2006, on Core2Duo and Xeon Macs.    The iBook is not one of those Macs.
    If you are using 802.11n connections on your Qwest that will be a problem for the iBook.  You need to make it is set for  802.11g/n network.
    Qwest was taken over by CenturyLink, and the configuration setup is here:
    http://internethelp.centurylink.com/internethelp/wireless-troubleshooting.html

  • Airport has network connection but not connecting to Internet

    I have a new Mac book pro, and am having trouble connecting to the internet on my home network.
    I can connect to our wireless network and get 100% signal. But the internet is not connecting.
    Using ethernet, I can get a connection and browse the internet and network. Using ethernet, the mac book pro has an IP address: 192.168.1.4
    My router has an IP address of 192.168.1.1
    The subnet Mask is 255.255.255.0
    Using the Airport and DHCP I get very different results:
    mac book pro IP: 169.254.17.98
    subnet mask: 255.255.0.0
    I have tried to manually input the IP, Subnet mask and router IP that work. But still no internet.
    I can see lots of similar posts but no real answers to this.
    If anyone can help, that would be great!
    Cheers

    If your wireless network is encrypted (WEP or WPA), try temporarily disabling encryption. Can your MBP get an IP address from DHCP and access the Internet wirelessly now?
    If not, let's double-check your MBP's AirPort settings ...
    System Preferences > Network > AirPort
    o Location: Automatic
    o In the left column, verify that an AirPort option exists. If it does not, click "+" to create one. (Note: If you are unable to create an AirPort configuration, the AirPort card in your computer either doesn't exist or it is not recognized.)
    o Verify that AirPort is "On." Click "Turn AirPort On" button if not.
    o Ask to join new networks: (enabled)
    o Show AirPort status in menu bar: (enabled)
    Systems Preferences > Network > AirPort > Advanced
    AirPort tab
    o Remember any network this computer has joined: (enabled)
    o Disconnect from wireless networks when logging out: (enabled)
    o Require Administrator password to control AirPort: (disabled)
    TCP/IP tab
    o Configure IPv4: Using DHCP
    o Configure IPv6: Off
    DNS tab
    o DNS Servers: <if required, add your desired DNS server IP address(es) here>
    o Search Domains: <if required, add your desired DNS Search Domain(s) here>
    WINS tab
    o Enter desired WINS info or leave the defaults
    AppleTalk tab
    o Make AppleTalk Active: (disabled)
    802.11X tab
    o Enter desired 802.11X info or leave the defaults
    Proxies tab
    o Enter the desired Proxies info or leave the defaults

  • Wifi signal is strong but cannot connect to the internet

    my iphone 3gs just suddenly cannot connect to the internet. it says internet connection is offline. any help pls?

    try to reset network setting or reset all setting in setting/general/reset. then try to connect again to the internet

  • Apple TV Syncing But Not Connecting To Internet!

    Hi,
    My Apple TV is syncing with my iMac just fine over WiFi. But for some reason it can't connect to the Internet on its own. The problem with this is that YouTube no longer works!
    Prior to installing Leopard, the Apple TV worked just fine, and didn't have a problem connecting to the Internet automatically on its own. So what's changed? If anyone can help me I'd appreciate it, 'cos YouTube was one of the main things I used on it.

    I still can't connect. On my Network Settings screen it says:
    IP Address: DHCP 169.25.**.
    Router Address: N/A
    DNS Address: N/A
    When the Internet used to work with the Apple TV, I don't remember seeing DHCP in the IP Address field. I also don't remember both the Router Address and DNS Address being unavailable.

  • HT201317 Erasing when not connected to internet

    I have accidentally erased a photo from my ipad which was previously connected to wifi and had photo stream on. Since i have deleted it when it was not connected to internet, would i be able to see the photo on my mac?

    it wasn't previously in photo stream, i am just hoping that it synced with photo stream when i had internet since i had the auto button turned on.

  • IPhone 5s: Intermittent wifi; wifi signal is full but phone not connected to internet

    Hi all, I have a strange wifi connectivity problem.
    At home:
    iPhone 5s connects normally to wifi, but after several minutes of usage (particularly browsing the internet), wifi signal remains full but safari states that phone is not connected to internet. Other apps like whatsapp also don't work. When I disable wifi then enable it again on my phone, I can connect to the internet temporarily again, but after a few seconds it disappears again. If I leave it for a while, it automatically connects again, but intermittently and unpredictably. All in all, unreliably.
    At home, MacBook Air works fine with no connectivity issues.
    At other wifi locations, the same iphone 5s has no problems at all with wifi connectivity.
    Also, I have already
    - reset phone
    - reset network settings on phone
    - reset router
    - unplugged and replugged modem and router to wall switch
    - previous iPhone 4 on iOS 7 had no issues with home wifi
    Thus, I am uncertain if this is a phone or wifi issue. My best guess would be that it is a compatibility issue between the iPhone 5s and my home wifi?
    Any suggestions as to where I could start solving this problem would be very appreciated! Thank you:)

    If you are having WiFi problems it is necessary to isolate whether the problem is with your network or your iPhone. Note: Do NOT consider your network to be blameless if some other devices can connect to it.
    First, test your iPhone on some other WiFi networks: a friends, Starbucks, Barnes &amp; Noble, etc.
    If it works well there then the problem is probably with your network. Try restarting your WiFi router by removing power for 30 seconds. If that does not help check for a firmware update for your router. If none exists which corrects the problem consider replacing the router.
    If your iPhone does not function well on other networks it possibly has a hardware problem. You could try Settings > General > Reset > Reset Network Settings to see if that corrects the problem. If not, contact Apple Support or visit an Apple store for evaluation. They can provide a replacement if your iPhone is bad.
    If you need more help please give the make, model, and version of your WiFi router and how you have it configured.
    See also here: http://www.apple.com/support/iphone/wifi/

  • TS2370 My iPhone detects my my Belkin G5 series wifi router but not connecting, I searched in internet and found many people have similar experience. Please tell , how can I fix it?.

    My iPhone detects my my Belkin G5 series wifi router but not connecting, I searched in internet and found many people have similar experience. Please tell , how can I fix it?.

    Try rebooting the router. Just remove the power for a few seconds. No settings are lost.

  • I have factory restored my 1pad 3 loaded ios8  - wifi works, safari works but it won't connect to the app store or iTunes citing 'not connected to internet' any ideas?

    I have factory restored my 1pad 3 loaded ios8  - wifi works, safari works but it won't connect to the app store or iTunes citing 'not connected to internet' any ideas?

    Reset the iPad and try again. Hold down on the sleep and home buttons at the same time for about 10 seconds until the Apple logo appears on the screen. Let go of the buttons, let the iPad start up.

  • I installed a new wifi router and airport will not connect automatically to it. It sees the network but will not connect unless I tell it to.

    I installed a new wifi router and airport will not connect automatically to it. It sees the network but will not connect unless I tell it to. I can't find anywhere in the utility or network preferences that will allow me to choose this router as the default. How do I fix this? BTW I'm using Lion.

    Are there any previous networks that you have used that have the same password as Molly?  YES
    Using System Preferences > Network > AirPort Advanced again, you need to remove any listings of previous networks that used the same password as Molly. Click the name of the network and click the - (minus) button at the bottom of the list of connections.
    Also delete any other networks (except Molly at the top of the list) that might have used the same name...Molly in the past.
    Delete any other networks that you no longer need so that your Mac will search for networks more quickly
    Click OK, then click Apply
    Open KeyChain Access and look for a listing of any old networks that you no longer need. Click to highlight the name of the network, then click the Delete Key on your computer.
    Then look for any old networks that might have used the name Molly in the past and do the same for them.
    Then look for any old networks that might have used the same password as the password for your "new" Molly network and delete them in the same way
    Click the KeyChain Access menu just next to the Apple icon in the upper left corner of the computer screen
    and then click KeyChain First Aid
    Enter the main administrator password for the Mac you are using and highlight the Repair button. Then click Start. You will see a message that repairs have been completed
    Quit Keychain Access
    Power down the entire network...all devices...order is not important
    Power up the modem first, then your main router, the other devices one at a time
    Log on to Molly and see if the Mac remembers it after a few tries. If not, I'm afraid that you will need to change the name of the wireless network and password on your router due to corruption issues on the Mac. You have done everything possible without re-installing the complete operating system.

  • Connected to public wifi but still safari is not connected to internet

    can someone help me to my iphone, i dont have a router at home, so that i always go to mall to connect to wifi but when im connected ti it and open my safari still says that im not connect to internet. im reseting the settings but still it doesnt work.. how will i fix this..? i cannot us my ipod touch capabilty..
    Message was edited by: yajle

    Most public places require that you agree to their terms and conditions prior to allowing you full access. Next time you connect, tap Settings > WiFi > and then tap the blue ">" next to the network with a check mark. Tap Forget this Network.
    Then tap Settings > WiFi and let the touch find the network. Tap on the name to connect and then wait for 20-30 seconds. If the network requires you to agree to Terms and Conditions, a Safari-like page will open up that allows you to do that.

  • My iMac does not connect to internet via wireless after I log in. I have to open network preferences and run the assistant everytime to make it work. Its a new system, updated to Mountain Lion,.

    My iMac does not connect to internet via wireless after I log in. I have to open network preferences and run the assistant everytime to make it work. Its a new system, updated to Mountain Lion,.

    Hi, this has worked for a few...
    Make a New Location, Using network locations in Mac OS X ...
    http://support.apple.com/kb/HT2712
    10.7…
    System Preferences>Network, top of window>Locations>Edit Locations, little plus icon, give it a name.
    10.5.x/10.6.x/10.7.x instructions...
    System Preferences>Network, click on the little gear at the bottom next to the + & - icons, (unlock lock first if locked), choose Set Service Order.
    The interface that connects to the Internet should be dragged to the top of the list.
    Instead of joining your Network from the list, click the WiFi icon at the top, and click join other network. Fill in everything as needed.
    For 10.5/10.6, System Preferences>Network, unlock the lock if need be, highlight the Interface you use to connect to Internet, click on the advanced button, click on the DNS tab, click on the little plus icon, then add these numbers...
    208.67.222.222
    208.67.220.220
    Click OK.
    Also, turn off IPv6:
    System Preferences » Network » AirPort » TCP/IP tab » Configure IPv6
    Or whatever Interface you use.

Maybe you are looking for