Have you ever seen a 24+ hour delay on a scheduled task to patch and reboot your server?

Our OS admins set up a schedule so that our SharePoint servers would patch and reboot once a month on the weekend during a scheduled time.
This past weekend, 3 of the 4 SP 2010 servers in the farm patched and rebooted as expected.
One of the servers (this is Windows 2012) was patched - but the reboot didn't occur until over 48 hours later.
I don't see anything in the event logs or the 14 hive logs that indicates the reason for the delay. The OS admins verified that the reboot was scheduled to occur at the scheduled time.
Has anyone else encountered anything like this?

My OS Admin has requested I correct one thing in this question.
> It isn’t really a ‘scheduled task’ that is forcing the machine to reboot. WSUS is sending patches to the machine based on registry settings.
>When it is done, the machine is supposed to reboot within 15 min.
> Also, in our case the patches installed around 6pm on the 1<sup>st</sup> and the machine rebooted on the 4<sup>th</sup> at around 9:40 am.
> This means about 62+ hours had passed.

Similar Messages

Hi sometimes airdrop shortcut in control center becomes a thin round box.the iOS version is 8.1.1.Have you ever seen that?

Look at the airdrop shortcut in control center!

Hi!
I have the same issue with my 5s (iOS 8.1.1) and I could solve it by opening control center in landscape mode and then getting back into portrait. Also it will fix if you restart the phone but the first way is faster and less annoying.
Hope this helps.

Have you ever seen this before?

just did an erase and install of 10.4.11. found my old bookmarks and now safari does this:
any ideas? thanks a bunch
dave

Hi,
Check in Font Book to see if you have any duplicate fonts installed?
This [article|http://docs.info.apple.com/article.html?path=FontBook/2.0/en/fb1799.ht ml] explains what to check for and do if there are duplicates.

Have you ever seen a p4 2.6c limited to 3.08??

I'm worrying abour this fsb limit. I've trie everything. currently runs at default vcore 2.65ddrv, ultra turbo in performance mode, 4/5 ram ratio and 2.5.3.3.6.
spread spectrum disabled.
it runs only at 237 fsb, with pat on slow, 1.7 vcore and 2.85 ddrv, can't run even at 238 fsb. tried also with 2/3 ratio it doesn't work.
i'm trying to silent my cpu so this limit isn'y very important but i've got good temperatures cpu at 30° idel and 48 ° after 2 hours of full load, system at 32°.
an idea?

this forum is friendly? cos i've posted three or four times and haven't got any answers to my questions..

I can't get gold of adobe - which is annoying me. I have a file that has been uploaded to my creative cloud that i did not upload or have i ever seen before. SO it seems adobe cannot guarantee security and are uncontactable - i think i may leave

I can't get gold of adobe - which is annoying me. I have a file that has been uploaded to my creative cloud that i did not upload or have i ever seen before. SO it seems adobe cannot guarantee security and are uncontactable - i think i may leave

Since this is an open forum, not Adobe support... you need Adobe staff to help
Adobe contact information - http://helpx.adobe.com/contact.html
-Select your product and what you need help with
-Click on the blue box "Still need help? Contact us"

I was warned and I went straight to the site and they were gone. I didnt was any time. Either way, there should be a way to either store or restore such items. Have you ever lost pictures that were so important to you that you couldnt sleep or eat for...

I was warned and I went straight to the site and they were gone. I didnt was any time. Either way, there should be a way to either store or restore such items. Have you ever lost pictures that were so important to you that you couldnt sleep or eat for some time. I have and it wasnt fun. I'm glad that you were able to get yours unlike some of us.

I am still wondering why iTunes tries to confuse me every time I try to make changes in my preferences, telling me that I "don't have enough permissions", although I am the administrator.
That's clearly a fault. Whether it's an iTunes problem or a Windows problem I can't say at this time. If you search the Using iTunes for Windows forum for "permissions", you should find threads that can help you sort out this problem.
Then, changes to the format are not obvious, and I get no notice that I am burning music files as data.
If you click on a playlist and look at the lower-right of the iTunes window, it says right there what format it will use to burn the playlist.

Hi,have you ever met such problem- one side of the display a bit lower than another,it is new, what should i do ?

Hi,have you ever met such problem- one side of the display a bit lower than another,it is new, what should i do ?

Call Apple Support

I've installed Flip4Mac WMV in Lion and when I try to listen to audio in some sites, it starts playing and after about 0.5 seconds it starts playing again. So, I have the same thing playing with a delay... What is happening and how to fix it?

I've installed Flip4Mac WMV in Lion and when I try to listen to audio in some sites, it starts playing and after about 0.5 seconds it starts playing again. So, I have the same thing playing with a delay... What is happening and how to fix it? Is there any other way to play theese kinds of files without using Flip4Mac WMV?

Use Flash Media Server to stream the files.......set up a timer and have all three of them play at once....and have a button switch the streams depending upon which stream you want to play.....and wallah......
you can also capture the stream.time from the video playing and resume from that point on the other videos as well....havent done this theoretically so I dont know how smooth the transistion between streams will be....but it can be done....
plus u may have to use double buffering techniques to make sure it starts up right away......
thelegendaryghost

My computer is shutting down before fully booting up. I am running the disk utilities program and have this message: Error: Disk Utility can't repair this disk . . . disk, and restore your backed-up files. Can anyone suggest what I should do next?

My computer is shutting down before fully booting up. I am running the disk utilities program and have this message: Error: Disk Utility can't repair this disk . . . disk, and restore your backed-up files. Can anyone suggest what I should do next?

So, you can't Install OSX to the external?
Or you can't boot from it when you do?
You're not the only one wondering... I'm reminded of the Goose that laid the Golden Egg story.

I just purchased a software upgrade. I received an e-mail that says, "To install your software, you simply launch the Mac App Store, click "Redeem"• found under Quick Links and enter your content code(s)." How do I do this??

I just purchased a software upgrade to OSX Lion. I received an e-mail that says, "To install your software, you simply launch the Mac App Store, click "Redeem"• found under Quick Links and enter your content code(s). How do I "launch the Mac App Store?"

Assuming you are running OS X 10.6.6 or later (10.7.x Lion, 10.8.x Mountain Lion or 10.9.x Mavericks), go to the Apple Menu (top left-hand corner of the screen)>App Store and it should become clear from there.

Change u201CDefault for baseline dateu201D programming. Have you ever do it?

Hello colleagues,
I want to pay to my vendors with the u201CBase line dateu201D equal to the entry date of the treated document.
For this reason I set several payment-terms with u201CDefault for baseline dateu201D = u201CEntry dateu201D.
This ran perfectly in FI transactions (fb01, fb05, ...), but the result was wrong with MIRO. I posted a Note to SAP and I was replied with the typical u201CThis is the standard behavior and you would need consulting service for your need.u201D
Then I decided to change the u201CDefault for baseline dateu201D to u201CNo defaultu201D in these payment-terms, in order to set the value I want with programming. But I have a lot of problems because apparently there isnu2019t a unique point to change in order to get the desired behavior. There are a lot, and in each t-code the called function is different. Have you faced up to a similar case? How did you solve it?
Thanks in advance.

We had to program enhacemnet points.

Have you ever tried to remove yourself from email notifications?

It takes 5 clicks and navigating through several menus, it's a joke

Hi jenseely,
I apologize, there may be a bit of confusion regarding the iTunes Store. iTunes Store Accounts are a subset of Apple IDs, as noted in these articles:
Using an existing Apple ID with the iTunes Store, Mac App Store, and iBooks Store - Apple Support
Set up an Apple ID in iTunes - Apple Support
It is certainly possible that you may have more than one Apple ID, including one that you have been using just for iTunes Store purposes. If that is the case and you need to change it, you may find the following articles helpful:
Apple ID: How to find your Apple ID - Apple Support
Change your Apple ID - Apple Support
Apple ID: What to do after you change your Apple ID - Apple Support
Cheers,
- Brenden

Have you ever been ripped off buy a seller and not get your money back?

Have you been ripped off by an ebay seller?

I have been ripped off on an wedding gown. Never got any response from customer service. The seller wanted the gown back but it would have cost more money then what I spent. The dress was a joke..a piece of material with tulle attached. I still havent been reimbursed

Have you ever had video, but no audio in FCP?

I had a friend digitize footage(as uncompressed 8bit) for me on his mac at work. When I import the clips into FCP there is video, but no audio. Audio does indeed exist because you can here it if the clips are opened in Quicktime. Any ideas on getting the audio to play?
Thank You Very Much!!!

Welcome to the forum!
What codec is the clip? If its a muxed MPEG clip, you'll need to demux/convert it to an editable format prior to importing into your FCP project.
To find out what codec was used to make the clip, open it in QT and hit Command j, then click on 'Video Track' to see the specs.
-DH

Windows.old Folders ... Have You Ever Had A Use For Them?

That you know of. What if the old OS has a virus in it?
As I've said earlier - nuke it just to be safe.

Has anyone ever needed the Windows.old folders created when an OS is re-loaded or a different OS is loaded on a machine containing an existing OS?
Deleting them can free up Gigs of space and I do it when I have had to re-load an OS or have upgraded an existing OS.
Now, for a secondary question. I have a machine that has this Windows.old folder that I cannot delete. I have tried while logging into the machine as the Domain Admin and again as the machine local Admin. Each time I am being told I don't have the sufficient permissions to delete the folder. I have never had this issue happen before. The Windows.old folder is on a Windows Server 2012 R2 machine. Any suggestions as to why this is happening?
This topic first appeared in the Spiceworks Community

Have you ever seen a 24+ hour delay on a scheduled task to patch and reboot your server?

Similar Messages

Maybe you are looking for