Have you ever seen a p4 2.6c limited to 3.08??

I'm worrying abour this fsb limit. I've trie everything. currently runs at default vcore 2.65ddrv, ultra turbo in performance mode, 4/5 ram ratio and 2.5.3.3.6.
spread spectrum disabled.
it runs only at 237 fsb, with pat on slow, 1.7 vcore and 2.85 ddrv, can't run even at 238 fsb. tried also with 2/3 ratio it doesn't work.
i'm trying to silent my cpu so this limit isn'y very important but i've got good temperatures cpu at 30° idel and 48 ° after 2 hours of full load, system at 32°.
an idea?

this forum is friendly? cos i've posted three or four times and haven't got any answers to my questions..

Similar Messages

Hi sometimes airdrop shortcut in control center becomes a thin round box.the iOS version is 8.1.1.Have you ever seen that?

Look at the airdrop shortcut in control center!

Hi!
I have the same issue with my 5s (iOS 8.1.1) and I could solve it by opening control center in landscape mode and then getting back into portrait. Also it will fix if you restart the phone but the first way is faster and less annoying.
Hope this helps.

Have you ever seen this before?

just did an erase and install of 10.4.11. found my old bookmarks and now safari does this:
any ideas? thanks a bunch
dave

Hi,
Check in Font Book to see if you have any duplicate fonts installed?
This [article|http://docs.info.apple.com/article.html?path=FontBook/2.0/en/fb1799.ht ml] explains what to check for and do if there are duplicates.

Have you ever seen a 24+ hour delay on a scheduled task to patch and reboot your server?

Our OS admins set up a schedule so that our SharePoint servers would patch and reboot once a month on the weekend during a scheduled time.
This past weekend, 3 of the 4 SP 2010 servers in the farm patched and rebooted as expected.
One of the servers (this is Windows 2012) was patched - but the reboot didn't occur until over 48 hours later.
I don't see anything in the event logs or the 14 hive logs that indicates the reason for the delay. The OS admins verified that the reboot was scheduled to occur at the scheduled time.
Has anyone else encountered anything like this?

My OS Admin has requested I correct one thing in this question.
> It isn’t really a ‘scheduled task’ that is forcing the machine to reboot. WSUS is sending patches to the machine based on registry settings.
>When it is done, the machine is supposed to reboot within 15 min.
> Also, in our case the patches installed around 6pm on the 1<sup>st</sup> and the machine rebooted on the 4<sup>th</sup> at around 9:40 am.
> This means about 62+ hours had passed.

I can't get gold of adobe - which is annoying me. I have a file that has been uploaded to my creative cloud that i did not upload or have i ever seen before. SO it seems adobe cannot guarantee security and are uncontactable - i think i may leave

I can't get gold of adobe - which is annoying me. I have a file that has been uploaded to my creative cloud that i did not upload or have i ever seen before. SO it seems adobe cannot guarantee security and are uncontactable - i think i may leave

Since this is an open forum, not Adobe support... you need Adobe staff to help
Adobe contact information - http://helpx.adobe.com/contact.html
-Select your product and what you need help with
-Click on the blue box "Still need help? Contact us"

I was warned and I went straight to the site and they were gone. I didnt was any time. Either way, there should be a way to either store or restore such items. Have you ever lost pictures that were so important to you that you couldnt sleep or eat for...

I was warned and I went straight to the site and they were gone. I didnt was any time. Either way, there should be a way to either store or restore such items. Have you ever lost pictures that were so important to you that you couldnt sleep or eat for some time. I have and it wasnt fun. I'm glad that you were able to get yours unlike some of us.

I am still wondering why iTunes tries to confuse me every time I try to make changes in my preferences, telling me that I "don't have enough permissions", although I am the administrator.
That's clearly a fault. Whether it's an iTunes problem or a Windows problem I can't say at this time. If you search the Using iTunes for Windows forum for "permissions", you should find threads that can help you sort out this problem.
Then, changes to the format are not obvious, and I get no notice that I am burning music files as data.
If you click on a playlist and look at the lower-right of the iTunes window, it says right there what format it will use to burn the playlist.

Hi,have you ever met such problem- one side of the display a bit lower than another,it is new, what should i do ?

Hi,have you ever met such problem- one side of the display a bit lower than another,it is new, what should i do ?

Call Apple Support

Change u201CDefault for baseline dateu201D programming. Have you ever do it?

Hello colleagues,
I want to pay to my vendors with the u201CBase line dateu201D equal to the entry date of the treated document.
For this reason I set several payment-terms with u201CDefault for baseline dateu201D = u201CEntry dateu201D.
This ran perfectly in FI transactions (fb01, fb05, ...), but the result was wrong with MIRO. I posted a Note to SAP and I was replied with the typical u201CThis is the standard behavior and you would need consulting service for your need.u201D
Then I decided to change the u201CDefault for baseline dateu201D to u201CNo defaultu201D in these payment-terms, in order to set the value I want with programming. But I have a lot of problems because apparently there isnu2019t a unique point to change in order to get the desired behavior. There are a lot, and in each t-code the called function is different. Have you faced up to a similar case? How did you solve it?
Thanks in advance.

We had to program enhacemnet points.

Have you ever been ripped off buy a seller and not get your money back?

Have you been ripped off by an ebay seller?

I have been ripped off on an wedding gown. Never got any response from customer service. The seller wanted the gown back but it would have cost more money then what I spent. The dress was a joke..a piece of material with tulle attached. I still havent been reimbursed

Windows.old Folders ... Have You Ever Had A Use For Them?

That you know of. What if the old OS has a virus in it?
As I've said earlier - nuke it just to be safe.

Has anyone ever needed the Windows.old folders created when an OS is re-loaded or a different OS is loaded on a machine containing an existing OS?
Deleting them can free up Gigs of space and I do it when I have had to re-load an OS or have upgraded an existing OS.
Now, for a secondary question. I have a machine that has this Windows.old folder that I cannot delete. I have tried while logging into the machine as the Domain Admin and again as the machine local Admin. Each time I am being told I don't have the sufficient permissions to delete the folder. I have never had this issue happen before. The Windows.old folder is on a Windows Server 2012 R2 machine. Any suggestions as to why this is happening?
This topic first appeared in the Spiceworks Community

Have you guys seen this fatelf stuff before?

I was just reading through some of the backpages on reddit... Anyhow, this fatelf concept is new to me. I was just wondering if it would ever be possible for something like this to be utilized by arch. I think it would be really cool if both the x86 and the x86_64 portions of arch could be merged back into one. I must admit that I don't understand this all too well, but it really does seem quite interesting.
http://icculus.org/fatelf/

From the standpoint of the x86 version I do agree with the added size and complexity that this would create. However, for the 64-bit version of arch I think it would make things more clean. I think i have around 30 different lib-32... packages on my computer, which all work great until I install something which is not familiar with the arch lib layout, then there is trouble. I think if the 32-bit and 64-bit libs were combined under the 64-bit ed, then such situations would just not arise. Perhaps I am just looking at this from the end user's point of view though. If it was considerably more difficult for the people making the packages, then I would see it as a bad thing. However, if on the other hand it took the same amount of effort to create one combined package as it would to create either package seperately, then what would happen is there would be less work in total for the people creating these packages. Or maybe at some point in the future there could be the option to install a 32-bit, 64-bit combined library instead of the standard 64bit lib that would come with the system. That way people who have no desire to run 32bit software would not experience the swell from these larger binaries, however people who do want to run 32bit stuff would have a more simple implementation.
Sorry to worry you guys, I don't really have any intention of wanting to make arch into archbuntu. I just thought this idea was interesting and wanted to see if it could be usable here and if so where.

Have you ever come across this ?

Hey there,
Every time I record a midi region, all the the the regions before are glued together with the one just recorded.....it's GrrrrrREALLY anoying ??
I've used Logic for years and it's never done this before. Is it a bug or just me seeing things
Thanks.
J.

eDrew,
You're a star !! It must have switched it self on or something
Thanks a bunch...
J.

Have you ever order a product from bea shop online?

I wonder how long does it take to deliver the license file?
my case, i've ordered since Nov 11 and has not get the email that send me a link to download or serial number yet.
just new to bea and this community, please forgive me if i'm asking the wrong forum. I've tried to email to customer service but it's failed (due to the return mail to me).
Best
Sudarat L.

You’ve tried to open a JPG as a catalog and LR can’t do that, but it also doesn’t know what to do, now.
Try to delete your preferences file, which is where LR remembers what catalogs it’s opened, and then, hopefully, you’ll be able to open your actual catalog, again. The location of the preferences file for LR3 is here:
http://helpx.adobe.com/lightroom/kb/preference-file-locations-lighroom-3.html
I think you got into this situation by dragging-and-dropping a JPG image onto LR’s shortcut. LR opens catalogs not images, so when you drag-and-drop an image onto LR’s shortcut it tries to open that image as a catalog, and it can’t.
Newer versions of LR won’t even try to open an image as a catalog, instead of getting stuck like yours is.
I have some vague memory of your situation not being easy to get out of, so maybe deleting the preferences file won’t actually fix it.

Have you ever see such error in service desk crmd_order ?

Start of processing 'Individual receipt'

Hello Priyanka,
I have the same problem by using Service Ticket in SAP CRM 5.0.
Did you already solved this issue? If so, can you please provide the solution!?
How can I activate and check the transfer log?
Thanks and regards
Alex

Lightroom have you ever got a picture name pop up on your screen then another pop up telling you to close lightroom down ? help please !

I've currently been using been lightroom 3.2 64-bit as my raw manager and official marker for quite a fair few years now, so long I've forgot . .
I know that lightroom has gone up to 4 and higher but I'm doing fine anyway ...
today I needed to mark a picture and a problem cropped up ! ...
first I shutdown the computer and I thought it would just re start from there scratch . .
but no ..
I've tried re-install using the actual software disk and that is a no
I've now got the point where by if I click on the lightroom icon on my desktop it produces my picture name 3 quarters up the screen ,
as    " lightroom opening catalog : Flight and Speed, Albefiera , Portugal ,JPG.LRCAT
than later on below a larger window bordered "adobe photoshop lightroom 64-bit"
saying      windows can check online for a solution to the problem.
             -> check online for a solution and close the program
             -> close the program
          V view problem details
Problem signature:
Problem Event Name: APPCRASH
Application Name: lightroom.exe
Application Version: 3.2.0.10
Application Timestamp: 4c69066d
Fault Module Name: MSVCR100.dll
Fault Module Version: 10.0.40219.325
Fault Module Timestamp: 4df2bcac
Exception Code: 40000015
Exception Offset: 00000000000761c9
OS Version: 6.1.7601.2.1.0.256.1
Locale ID: 2057
Additional Information 1: 7ca5
Additional Information 2: 7ca59d909df4ff9ce7becbdd4d760b48
Additional Information 3: 223f
Additional Information 4: 223f678575c9291349fad229d1f7de8b
Read our privacy statement online:
http://go.microsoft.com/fwlink/?linkid=104288&clcid=0x0409

You’ve tried to open a JPG as a catalog and LR can’t do that, but it also doesn’t know what to do, now.
Try to delete your preferences file, which is where LR remembers what catalogs it’s opened, and then, hopefully, you’ll be able to open your actual catalog, again. The location of the preferences file for LR3 is here:
http://helpx.adobe.com/lightroom/kb/preference-file-locations-lighroom-3.html
I think you got into this situation by dragging-and-dropping a JPG image onto LR’s shortcut. LR opens catalogs not images, so when you drag-and-drop an image onto LR’s shortcut it tries to open that image as a catalog, and it can’t.
Newer versions of LR won’t even try to open an image as a catalog, instead of getting stuck like yours is.
I have some vague memory of your situation not being easy to get out of, so maybe deleting the preferences file won’t actually fix it.

Have you ever seen a p4 2.6c limited to 3.08??

Similar Messages

Maybe you are looking for