Have your say on Cloud

The team are building better software to help you manage print in any hosted environment. Take our quick survey for your chance to have a say on Cloud. surveymonkey.com/s/XXH9YLM

I have a need to supply a guest network, ideally without introducing additional APs. I have APs that can have additional SSIDs with their own VLANs. I have a router that is not VLAN-aware, but has two physical ports, one of which is for the corp network and the other for the guest (the router ports are isolated). Everything connects through a switch that is VLAN-aware.
What I'd like to be able to do, is connect both ports from the router to the switch, and configure so that VLAN2 can only communicate to the guest port on the router. And the default VLAN (VLAN1) can only communicate to the default VLAN ports on the switch.A picture is worth a lot more:DLink switch is a DGS-1210-24.I'm getting confused between VID, PVID, 'tagged', 'untagged', and 'not a member', and asymmetrical/symmetrical VLANs.
I think what I want is:- enable...

Similar Messages

Product Ownership Assessment Survey - Have your say!

Hi all
The User Design and Research Team is calling for your feedback on our products and we are listening hard.
Please just take a few minutes to check out this article with details.
Thank you in advance!
Community Advocate Program Manager
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество

@ Onepamopa - thank you for voicing out. I really thought I was one unlucky customer and one of a few to experience such inconvenience and distress over a product and design that Lenovo took pride in. I too have spent 1 month trying to solve the problems with a brand new Lenovo Yoga Pro 3. I am now using laptop number four of the same model in 1 month, a proof of my blind faith in this product and increasing disillusionment....and deludedness... I was already advised by friends and colleagues, after laptop 1 that I should perhaps change brands... Objectively speaking, the after sales service i.e. technical and service support were very helpful, however, when purchasing a brand new product you wouldn't think you'd have problems already from hour 1. Front line and customer service attitude were less than professional and frankly quite rude. I was lucky that I'd purchased through a retailer...otherwise my brand new laptop would be out of the shop and sent straight to repair. @ Limpaar - also thank you for sharing your point. I thought it was great when this assessment came out (though also somewhat ironic)... that there was a channel where I could communicate with Lenovo...where customers' views would be valued and heard... I then was filtered out on the second page and that was the end of that... Is there a Lenovo representative online? I'm not one to cry online without first assessing and taking alternative steps to solve the problem...I have been co-operating and I'd say pretty patient... Lenovo.... where are you?... Those that do...

Product User Assessment Survey: Have your say!

Hi all
The User Design and Research Team is calling for your feedback on our products and we are listening hard.
Please just take a few minutes to check out this article with details.
Thank you in advance!
Community Advocate Program Manager
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество

I have a need to supply a guest network, ideally without introducing additional APs. I have APs that can have additional SSIDs with their own VLANs. I have a router that is not VLAN-aware, but has two physical ports, one of which is for the corp network and the other for the guest (the router ports are isolated). Everything connects through a switch that is VLAN-aware.
What I'd like to be able to do, is connect both ports from the router to the switch, and configure so that VLAN2 can only communicate to the guest port on the router. And the default VLAN (VLAN1) can only communicate to the default VLAN ports on the switch.A picture is worth a lot more:DLink switch is a DGS-1210-24.I'm getting confused between VID, PVID, 'tagged', 'untagged', and 'not a member', and asymmetrical/symmetrical VLANs.
I think what I want is:- enable...

Product Owner Assessment Survey - Have your say!

Hi all
The User Design and Research Team is calling for your feedback on our products and we are listening hard.
Please just take a few minutes to check out this article with details.
Thank you in advance!
Community Advocate Program Manager
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество

I have a need to supply a guest network, ideally without introducing additional APs. I have APs that can have additional SSIDs with their own VLANs. I have a router that is not VLAN-aware, but has two physical ports, one of which is for the corp network and the other for the guest (the router ports are isolated). Everything connects through a switch that is VLAN-aware.
What I'd like to be able to do, is connect both ports from the router to the switch, and configure so that VLAN2 can only communicate to the guest port on the router. And the default VLAN (VLAN1) can only communicate to the default VLAN ports on the switch.A picture is worth a lot more:DLink switch is a DGS-1210-24.I'm getting confused between VID, PVID, 'tagged', 'untagged', and 'not a member', and asymmetrical/symmetrical VLANs.
I think what I want is:- enable...

Product Ownership Assesssment Survey: Have your say

Hi all
The User Design and Research Team is calling for your feedback on our products and we are listening hard.
Please just take a few minutes to check out this article with details.
Thank you in advance!
Community Advocate Program Manager
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество

I have a need to supply a guest network, ideally without introducing additional APs. I have APs that can have additional SSIDs with their own VLANs. I have a router that is not VLAN-aware, but has two physical ports, one of which is for the corp network and the other for the guest (the router ports are isolated). Everything connects through a switch that is VLAN-aware.
What I'd like to be able to do, is connect both ports from the router to the switch, and configure so that VLAN2 can only communicate to the guest port on the router. And the default VLAN (VLAN1) can only communicate to the default VLAN ports on the switch.A picture is worth a lot more:DLink switch is a DGS-1210-24.I'm getting confused between VID, PVID, 'tagged', 'untagged', and 'not a member', and asymmetrical/symmetrical VLANs.
I think what I want is:- enable...

Have your say on Oracle ADF

I've published a survey to gather information on how we can best help you become successful with Oracle ADF. Please take a few minutes to complete the survey. Details can be found on my blog
http://blogs.oracle.com/grantronald/entry/your_chance_to_change_the
Regards
Grant
p.s. feedback is that the survey works better with FireFox.

Bump

Have paid for adobe cloud but now it is say start your trial

have paid for adobe cloud but now it is say start your trial

There are no billing issue, I have got it confirmed.
Creative Cloud applications unexpectedly revert to trial mode | CS6, CCM
If you use Photoshop at all, you may need to install the latest update to resolve this issue. See this blog post for more information:
http://blogs.adobe.com/crawlspace/2013/01/photoshop-13-0-413-1-2-updat es-now-available.html
If you do not have Photoshop, then try the solution that others have mentioned previously:
Open the Adobe Application Manager (AAM).
If applicable, let AAM complete any automatic updates and restart itself.
Sign in with your Adobe ID. (Optionally, you can close AAM at this point.)
Open a CS6 application (e.g. InDesign CS6).
If prompted (e.g. you get the trial screen), click "License This Software" and sign in with your Adobe ID.
Refer to: Re: Top Ten Questions About Creative Cloud
creative cloud software says my free trial has expired, but I have a paid subscription
Regards
Rajshree

We have two users that have been using Creative Cloud for almost a year. Recently, sometime in the last 4ish weeks, the users can no longer run Creative Cloud apps. (Yes, our subscription is paid.) Error simply says administrator access is required

We have two users that have been using Creative Cloud for almost a year. Recently, sometime in the last 4ish weeks, the users can no longer run Creative Cloud apps. (Yes, our subscription is paid.) Error simply says administrator access is required to install. The apps have already been installed. The users cannot run them unless they are in the local admin group.Using "Run as admin" does not work. It gives the same error.
I have opened a case with adobe support and was basically told to suck it up and put the users in the admin group. Actually, what was said was that it is "mandated that the users have administrative rights".
There are a couple of things wrong with this. It was working for both users until recently - a recent required creative cloud update. The users have never been local admins yet the apps were working (poorly, but working).
We are in an enterprise environment and users simply do not have administrative rights on the computers.
I have changed permissions on all adobe folders, granting users or authenticated users modify or full control rights, did the same in whatever Adobe registry HKLM keys I could find. Nothing has allowed the users to run the apps - unless they are put in the local admin group.
Someone has to have a fix for this. Adobe apps have proved to have far too many vunerabilities to even entertain the idea of elevating user rights. I can't imagine that enterprise environments are allowing this.
Any help or suggestions are greatly appreciated.

Jeff,
Thank you for your response. The users in question are "standard" domain users. We do not reduce users permissions below the standard level.
The apps do not load with their current standard user permissions.
The thing that makes this odd, is that up until recently they did this issue with cloud apps. The only way I can make it work for them now is to put them in the local administrator group on their pc's - which is not going to happen.
This is what they now see. As I said before, this was not a problem up until recently they would see all their available apps. If I put them in the local admin group the apps are listed without having to install. Everything is there, just not accessible to the user.

I am using Mac, I have downloaded the Creative Cloud but when it comes to downloading an App, in the Apps tab a "Download Error" comes up, saying I should contact customer support. Any help will be appreciated.

I am using Mac, I have downloaded the Creative Cloud but when it comes to downloading an App, in the Apps tab a "Download Error" comes up, saying I should contact customer support. Any help will be appreciated.

sign out and then back in to your cc desktop app.
if that fails to resolve the problem, Sign in, activation, or connection errors | CS5.5 and later

Why is my storage saying full when I have loads in my cloud? I can't even update my settings?

Why is my storage saying full when I have loads in my cloud? I can't even update my settings?

There is a really simple way of freeing up a ton of space that no one discusses because it is hidden yet so obvious. Your text messages and iMessages and all the photos and videos sent and received in them are hogging a ton of space. I deleted all mine and went from using 4.9 GB of space to 232 MB.
Go to you messages app and delete as many text messages and iMessages as possible. I deleted them all, but if you want some, delete as many as you can. At the moment, with ios7 there is no way to delete all at once, so you have to manually delete each thread. Just hit edit at the top and starts deleting.
Then go back into your icloud settings and see how big the backup will be. You'll be shocked. Another additional step is to delete your backup and save a new one immediately. That's just me though because I like to start from scratch. Just make sure you are connected to wifi and can plug in while doing this.
Let me know how it goes?

Says i have music in the cloud waiting but i cant figure out how to get it

says i have music in the cloud waiting but i cant figure out how to get it

If it's music purchased from the iTunes store you should be able to download it from your purchased list, as explained here: http://support.apple.com/kb/ht2519.

Hi, my iPod touch has been unable to sync since downloading the new cloud software. It says: An error occurred while restoring this iPod (-34) So my music is not on it. it doesn't have 3G so the cloud is pointless anyway. Music is all I use on it.

Hi, my iPod touch has been unable to sync since downloading the new cloud software. It says: An error occurred while restoring this iPod (-34) So my music is not on it. The apps are still on it. It doesn't have 3G so the cloud is pointless anyway. It just said it was a software update, I should have avoided it. Music is all I use on it so help me please!

Error 20, 21, 34, 37: These errors typically occur when security software interferes with the restore and update process. If you are using a PC, follow this article to resolve this issue.
Above from:
http://support.apple.com/kb/TS3694

I received a notice that there is an update for my Lightroom 5. I have the non-creative cloud version. Is the update available for non-cloud users? It says to download click the link and it takes me to Cloud free trial screen.

I received a notice that there is an update for my Lightroom 5. I have the non-creative cloud version. Is the update available for non-cloud users? It says to download click the link and it takes me to Cloud free trial screen.

It is the same installer. You can run it as 30-days trial (CC version) and decide later for CC or stand-alone. To license as stand-alone, follow this guide.
If you already have the LR6 license key, you can enter it during setup and do not need to follow the guide.

When trying to use find my Iphone says off line , suggestion is to switch on and off airplane mode , so are you saying when you have your phone nicked you should leave a note for the thief to do this so we can trace him?

when trying to use find my Iphone says off line , suggestion is to switch on and off airplane mode , so are you saying when you have your phone nicked you should leave a note for the thief to do this so we can trace him?

Ivorbiggin wrote:
so are you saying when you have your phone nicked you should leave a note for the thief to do this so we can trace him?
Yes.

I just have dowload the creative cloud on my PC, but I cannot connect with my ID each time I try it says you have been disconnected! why?

I just have dowloaded the creative cloud on my PC, but I cannot connect me with my ID each time I try it says you have been disconnected! why?

Chat Now button near the bottom for Activation and Deactivation problems may help
http://helpx.adobe.com/x-productkb/policy-pricing/activation-deactivation-products.html
OR
Membership and Payments http://helpx.adobe.com/x-productkb/policy-pricing/membership-subscription-troubleshooting- creative-cloud.html

Have your say on Cloud

Similar Messages

Maybe you are looking for