Having 1 router and multiple WCCP cache devices: cisco and non-cisco

I have a 6500 running WCCPv1. I have two devices single connected to the 6500: a CE565 and a non-cisco device that does WCCPv1. The 6500 is configured for WCCP redirection. What happens to the requests ? Are they serviced by both devices in parallel ? Is only one device servicing the request ? Load balanced ? I know a cluster won't be formed because the device is non-cisco. BTW, the non-cisco device only support WCCP v1.

Will this detection between devices work if the non-cisco device is not really a cache engine, but a web filter that uses WCCP? In reality, my ideal goal would be that traffic would be redirected to the web filter (non-Cisco), get filtered, and then redirected to the catalyst, and then again redirected to the cache engine to be cached. But I am not sure this will happen due to routing. So I guess is either one or the other, correct ? I don't have the option to connect the web filter in other box, neither the Cache Engine. I thoutht that they would not detect each other at all and the router would be doing a decision there. How do they detect each other ? via which protocol ? WCCP ?

Similar Messages

My entire iTunes library is missing on my two non-Apple computers. My libraries still exist on my iPad and iPhone though. I tried deauthorizing and then reauthorizing my devices, uninstalling and then reinstalling iTunes and nothing works. What happened?

My entire iTunes library is missing on my two non-Apple computers. My libraries still exist on my iPad and iPhone though. I tried deauthorizing and then reauthorizing my devices, uninstalling and then reinstalling iTunes and nothing works. What happened?

See Empty/corrupt iTunes library after upgrade/crash or
Recover your iTunes library from your iPod or iOS device.
tt2

I do not remember what name and password and it uses the device used and I can not open it is at activation

I do not remember what name and password and it uses the device used and I can not open it is at activation

Hey there Haimnus!
I have two articles that I believe will help you resolve this issue:
iCloud: Find My iPhone Activation Lock in iOS 7
http://support.apple.com/kb/ht5818
Find My iPhone Activation Lock: Removing a device from a previous owner’s account
http://support.apple.com/kb/ts4515
Take care, and thanks for visiting the Apple Support Communities.
Cheers,
Braden

One premium account and multiple Skype HD devices

Will one Premium account and multiple non premium HD accounts work for video calling? Basically the idea is 10 HD skype devices, the set top boxes connected to tvs will dial into one Premium Mac or PC account for multiple video conferencing.

Yes, one user needs to have a Group Video Calling subscription.
Unfortunately, not all devices support Group Video calling (TV's for example, do not).
Please see our website for more information: http://www.skype.com/en/features/group-video-chat/.

Cisco Prime - non Cisco devices

Hi
We have started using Cisco Prime for our network management. On our sites we have a few devices managed by other vendors which are non cisco devices, we would like to keep these in the diagrams on cisco prime but since we don't manage them we don't want them to use up our licenses.
Is there a way to retain the device info maybe as a note or something on the side of the diagram without the device using up a seat in the license?

Which Prime? LMS or Infrastructure? ..or one of the others.
LMS for example doesn't ever display a non-Cisco device in the Topology view. It does limited management of non-Cisco devices and they do not consume device licenses.

3750 and Multiple WCCP Devices?

We are going to be setting up a 3750 Layer 3 switch to WCCP-Redirect packets from the Client Subnet to destination devices within rfc1918 subnets to a Silver Peak Wan Optimizer, and Client packets to destination devices within non-rfc-1918 (Internet) addresses to a Websense Web Proxy.
I have a couple of questions.
1) Is it possible to have dual wccp groups on the 3750? If so, could you have say group 50 and 51 for websense, and 52 and 53 for Silver Peak?
2) On the 3750 Switch, Do the Websense and Silver Peak Devices need to be on a separate Vlan on the 3750 from the clients, or can the packets be redirected on the same interface on the 3750 ?
Are there any other caveats to this setup that we may want to know about?
Thanks,
Dan

Yes. The iOS is different for each device.

Having to burn multiple DVDs to check quality and etc of clip, any other???

Ok I have heard about (http://www.blackmagic-design.com/products/intensity/). My question is, will that let me see my clips as if it where being played on a DVD player? For example: Sometimes I compress a clip and it looks as if everytime someone moves they have lines on them, but when I burn it on DVD and watch it on my TV it looks fine or vise versa. Also sometimes when I compress something and burn it and play it on the TV the people have like this ghosting affect when they move but not when I watch the compressed file on my mac. Basicly I am tiered of wasting my DVDs just to make sure it looks ok. Will this "http://www.blackmagic-design.com/products/intensity/" solve my problem?
thanks

Welcome to the Apple Discussions. If you save the project to Disk Image first you might be able to burn two at a time. Saving as a disk image lets you check the encoding with DVD Player first before committing to disk. Then burn it with Disk Utility at the slowest speed possible.
Yesterday's MacOSXHints site has a hint on how to open multiple occurrences of the same application, in this case Disk Utilty: An easy way to run multiple instances of any program.
If that didn't work you could use Disk Utiltiy to burn the disk image while using iDVD to burn directly from the project. The first burn would be very slow as it would have to redo the encoding but then it would go pretty fast after that. Be sure to give the drives a bit of a rest. You don't want them to overhead and fail which is possible.
OT

I updated to 5.0.1 and lost all my game data for my apps since the update and have checked my devices table and tried to upload anyone got any idea how to get my freaking game data back

Can any one help?

Hi,
Thanks for replying so quick. I think before the update the apps were not in the library. Now after the update the apps are in the itunes libary minus the game data. I think that happened because I tried to find my game data. I search my pc and found a previous itunes libraries folder and when I used that I found a file I clicked on a file called itunes Library 2012-01-10 that opened in the itunes library. The date on that file was the date of the upgrade to 5.0.1. when I lost all my games data.
There is another file in the itunes libcalled iTunes Library 2011-03-16 would it be worth trying to download that as it may have more game data?
I ment to say the devices tab not table it is the option in the iTunes app to find out about your device.

HT201441 the device has already been erased, but is still linked to the previous owner's account, you will be prompted for the previous owner's Apple ID and password during the device setup and activation process

I could not contact the previous owner so that can help me the way you have described

The Help page you came here from gives you all the information; without the previous owner's password or his removing the phone from his list of devices you cannot proceed and I'm afraid your phone is useless.

XP PC Does not see Media Card. Device Memory and Media Card are not available.....

I am starting a new thread because the old one was marked as resolved and it isn't.
My Windows XP desktop is no longer seeing my BB Storm Media Card. I am getting the error:
"Device Memory and Media Card are not available because the Mass Storage is currently in use."
I have followed these directions:
Options > Memory >
Media Card Supoport - ON
Media Transfer Protocol (MTP) - ON
Mass Storage Mode Support - ON
Auto Enable Mass Storage Mode When Connected - YES
SAVE
I have application free pace 8.1 MB
and the error message:
"Device Memory and Media Card are not available because the Mass Storage is currently in use."
The card is there and is seen by my BB Storm. Media > Explore
I have removed and reinstalled the card.
On the desktop I have tried Explore as well as Disk Management and nothing shows up for the Media Card although the Blackberry itself is present.
Please help.

Hi there!
Give this KB a try perhaps?
KB19717 The BlackBerry smartphone is not detected as a USB Mass Storage Device when connected to a computer
Good luck and let us know!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

When pluggling my iPhone into my laptop and opening itunes no devices appear.

When plugging my iPhone into my laptop and opening iTunes no devices appear and i am therefore unable to sync my device, why is this?

Hi dominicdominic,
Welcome to the Apple Support Communities! I understand you are trying to connect your iPhone to your computer so you can sync media to the iPhone, but when you connect your iPhone to your computer iTunes does not recognize the device. The steps to get this resolved will be different depending on if your computer is running Mac OS X or Windows. I’ll include both articles below.
iOS: Device not recognized in iTunes for Mac OS X
http://support.apple.com/kb/ts1591
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/ts1538
I hope this helps,
-Joe

Iphone 4s is not recognised by my pc; I get a message to say that the device malfunctioned and not recognised by windows

My iphone 4s is suddenly not recognised by my pc; I get a message to say that the USB device is not recognised, and that the last device malfunctioned and not recognised by windows.

Hey Jacky,
Welcome to Apple Support Communities.
Take a look at the article linked below, it provides information and troubleshooting suggestions that can help you resolve the issue with your iPhone 4s not being recognized by iTunes on your PC.
iPhone, iPad, or iPod not recognized in iTunes for Windows - Apple Support
Cheers,
-Jason

From google I click on a link I typed in and then it just says it's loading and it's a blank page and it does nothing

From google I type in what I want to look up, I click on the link I want and it takes me to a blank page that says it's loading and nothing happens.

Clear Cookies & Cache
* https://support.mozilla.com/en-US/kb/Template:clearCookiesCache
Clear the Network Cache
* https://support.mozilla.com/en-US/kb/How%20to%20clear%20the%20cache#w_clear-the-cache
Reload web page(s) and bypass the cache.
* Press and hold Shift and left-click the Reload button.
* Press "Ctrl + F5" or press "Ctrl + Shift + R" (Windows,Linux)
* Press "Cmd + Shift + R" (MAC)
Check and tell if its working.

AP1262 bridge to Non-Cisco Access Point?

I would like to use a Cisco AP1262 in a mobile command vehicle to bridge to any WiFi Access Point that I know the SSID and Pasword to. Will the 1262 Bridge to a Non-Cisco Access Point?
If so, any assistance in finding an example configuration would be appreciated.
Thanks,
Brian

Hi Brian,
Yes, you can configure 1262 as Universal Workgroup bridge where it will associate to any cisco or non-cisco root AP. You can only connect one wired client behind universal WGB.
You just need to configure "station-role workgroup-bridge universal <wired_client_MAC>" under radio interface of WGB. (1262)
Something similar should work for your 1262, if you want it in 5GHz, otherwise configure radio 0 interface for WGB
hostname WGB
dot11 ssid <SSID-NAME>
authentication open
authentication key-management wpa version 2
wpa-psk ascii <PASSWORD>
interface Dot11Radio1
encryption mode ciphers aes-ccm
station-role workgroup-bridge universal 068d.098a.d422 <- Ur wired MAC
ssid <SSID-NAME>
bridge-group 1
interface GigabitEthernet0
bridge-group 1
NB: I haven't tested this, so you have to test & confirm. If WPA2/AES is not supported then you may need to choose suitable security protocol & encryption mechanism.
HTH
Rasika
*** Pls rate all useful responses ****

I am having issues related to storage and I believe this is causing my computer to slow down. "Other" files part is the major occupier(180 GB). I have done Omni disk and multiple other cleaning(iTunes-device, restart, etc), yet have not been able to empty

I am having issues related to storage and I believe this is causing my computer to slow down. "Other" files part is the major occupier(180 GB). I have done Omni disk and multiple other cleaning(iTunes-device, restart, etc), yet have not been able to empty any more space, nor to speed up my computer? Any suggestions? All your contributions are welcomed. Thanks. Mehmet Mazhar Celikoyar

Below is the result:
Hardware Information:
          MacBook Pro (15-inch, Mid 2009)
          MacBook Pro - model: MacBookPro5,3
          1 3.06 GHz Intel Core 2 Duo CPU: 2 cores
          4 GB RAM
Video Information:
          NVIDIA GeForce 9400M - VRAM: 256 MB
          NVIDIA GeForce 9600M GT - VRAM: 512 MB
Audio Plug-ins:
          BluetoothAudioPlugIn: Version: 1.0
          AirPlay: Version: 1.9
          AppleAVBAudio: Version: 2.0.0
          iSightAudio: Version: 7.7.3
Startup Items:
          HP IO - Path: /Library/StartupItems/HP IO
System Software:
          OS X 10.9 (13A603) - Uptime: 3 days 22:8:6
Disk Information:
          ST9500420ASG disk0 : (500.11 GB)
                    EFI (disk0s1) <not mounted>: 209.7 MB
                    Macintosh HD (disk0s2) /: 499.25 GB (220.49 GB free)
                    Recovery HD (disk0s3) <not mounted>: 650 MB
          HL-DT-ST DVDRW GS23N
USB Information:
          Apple Inc. Built-in iSight
          Apple Internal Memory Card Reader
          Apple Inc. Apple Internal Keyboard / Trackpad
          Apple Computer, Inc. IR Receiver
          Apple Inc. BRCM2046 Hub
                    Apple Inc. Bluetooth USB Host Controller
FireWire Information:
Thunderbolt Information:
Kernel Extensions:
          com.rim.driver.BlackBerryUSBDriverInt          (0.0.64)
          com.livedrive.filesystems.livedrivefs          (2.1.14)
Problem System Launch Daemons:
Problem System Launch Agents:
Launch Daemons:
          [loaded] com.adobe.fpsaud.plist
          [loaded] com.adobe.versioncueCS4.plist
          [loaded] com.creativebe.MainMenuHelper.plist
          [loaded] com.macpaw.CleanMyMac2.Agent.plist
          [loaded] com.magican.castle.plist
          [loaded] com.microsoft.office.licensing.helper.plist
          [loaded] com.rim.BBDaemon.plist
          [failed] com.zeobit.MacKeeper.plugin.AntiTheft.daemon.plist
Launch Agents:
          [loaded] com.adobe.CS4ServiceManager.plist
          [loaded] com.hp.messagecenter.launcher.plist
          [loaded] com.hp.productresearch.plist
          [loaded] com.rim.BBLaunchAgent.plist
User Launch Agents:
          [loaded] com.adobe.ARM.[...].plist
          [failed] com.macpaw.CleanMyMac2Helper.diskSpaceWatcher.plist
          [failed] com.macpaw.CleanMyMac2Helper.scheduledScan.plist
          [failed] com.macpaw.CleanMyMac2Helper.trashWatcher.plist
          [failed] com.UninstallerTool.plist
          [failed] com.VolumeWatcherTool.plist
          [failed] com.zeobit.MacKeeper.Helper.plist
User Login Items:
          BlackBerry Device Manager
          HP Scheduler
3rd Party Preference Panes:
          Adobe Version Cue CS4
          DC30 Xact Driver Panel
          Flash Player
          Flip4Mac WMV
          Perian
Internet Plug-ins:
          AdobePDFViewer.plugin
          AdobePDFViewerNPAPI.plugin
          Default Browser.plugin
          Flash Player.plugin
          FlashPlayer-10.6.plugin
          Flip4Mac WMV Plugin.plugin
          iPhotoPhotocast.plugin
          JavaAppletPlugin.plugin
          OfficeLiveBrowserPlugin.plugin
          QuickTime Plugin.plugin
          SharePointBrowserPlugin.plugin
          Silverlight.plugin
User Internet Plug-ins:
          OctoshapeWeb.plugin
Bad Fonts:
          None
Time Machine:
          Mobile backups: OFF
          Auto backup: NO
          Volumes being backed up:
                    Macintosh HD: Disk size: 499.25 GB Disk used: 278.75 GB
          Destinations:
                    TOSHIBA EXT [Local] (Last used)
                    Total size: 2 TB
                    Total number of backups: 5
                    Oldest backup: 2013-10-24 23:21:31 +0000
                    Last backup: 2013-10-25 02:59:08 +0000
                    Size of backup disk: Excellent
                              Backup size 2 TB > (Disk size 499.25 GB X 3)
Top Processes by CPU:
               3%          WindowServer
               1%          EtreCheck
               1%          Microsoft PowerPoint
               0%          BBLaunchAgent
               0%          fontd
               0%          aosnotifyd
Top Processes by Memory:
          168 MB             Microsoft PowerPoint
          123 MB             Safari
          86 MB              Mail
          74 MB              WindowServer
          45 MB              com.apple.WebKit.Networking
          45 MB              com.apple.WebKit.WebContent
          41 MB              Finder
          41 MB              PluginProcess
          41 MB              mds_stores
          33 MB              Notes
Virtual Memory Statistics:
          72 MB              Free RAM
          1.27 GB            Active RAM
          1.24 GB            Inactive RAM
          667 MB             Wired RAM
          2.58 GB            Page-ins
          111 MB             Page-outs

Having 1 router and multiple WCCP cache devices: cisco and non-cisco

Similar Messages

Maybe you are looking for