Having 3194 Error.

I'm Having Problem Updateing My Iphone 3gs Having 3194 Error. What should i do?

It means you aren't using the latest iTunes (10.5) or you previously hacked the phone to downgrade the iOS.
"This device is not eligible for the requested build: Also sometimes displayed as an "error 3194." If you receive this alert, update to the latest version of iTunes. Third-party security software or router security settings can also cause this issue. To resolve this, follow Troubleshooting security software issues.
Downgrading to a previous version of iOS is not supported. If you have installed software to performunauthorized modifications to your iOS device, that software may have redirected connections to the update server (gs.apple.com) within the Hosts file. First you must uninstall the unauthorized modification software from the computer, then edit out the "gs.apple.com" redirect from the hosts file, and then restart the computer for the host file changes to take affect.  For steps to edit the Hosts file and allow iTunes to communicate with the update server, see iTunes: Troubleshooting iTunes Store on your computer, iPhone, iPad, or iPod—follow steps under the heading Blocked by configuration (Mac OS X / Windows) > Rebuild network information > The hosts file may also be blocking the iTunes Store. If you do not uninstall the unauthorized modification software prior to editing the hosts file, that software may automatically modify the hosts file again on restart. Also, using an older or modified .ipsw file can cause this issue. Try moving the current .ipsw file, or try restoring in a new user to ensure that iTunes downloads a new .ipsw."

Similar Messages

  • HT201263 hello guyz i m having problem while restoring my iphone 4.It is showing me the 1600 error before that it showed 3194 error i fixed that after that it showed me the error 1601 also i fixed it but now with 1600 plz plz help me guyz

    hello guyz i m having problem while restoring my iphone 4.It is showing me the 1600 error before that it showed 3194 error i fixed that after that it showed me the error 1601 also i fixed it but now with 1600 more then 20 times tried but no advantage plz guyz help me?

    iTunes: Specific update-and-restore error messages and advanced troubleshooting - http://support.apple.com/kb/TS3694 - relating to iPad, iPhone, iPod touch, iTunes

  • Error 3194, Error 17

    Went to update my ipod touch 5g to ios8, and instead went into recovery mode. Now, when i try to restore the ipod on itunes it gives me the message "Error 3194, Error 17, or This device isn't eligible for the requested build." For the love of god, I just want my life back. How can I fix this problem?

    Resolve network errors
    Related errors: 17, 1004, 1013, 1638, 3014, 3194, 3000, 3002, 3004, 3013, 3014, 3015, 3194, 3200, or "There was a problem downloading the software," or say the "device isn't eligible for the requested build.". These alerts mean that your computer is either having difficulty contacting the Apple update server or communicating with your device.
    Check your computer for software or settings that might cause communication issues between your computer and Apple or between your computer and your device.
    iOS: Restore error 3194 or 'This device isn't eligible for the requested build'

  • I am trying to update my iPad 2 but it wont let me. it is giving me a 3194 error plz help.

    the iOS was 5 but when i tryed to upgrade it woulndnt let me and it show me a 3194 error. i did everything like restarting my computer unpluging my ipad and nothing. the screen is black because i was trying to downgrade and i cant trun it on. please help me

    Straight from Apple:
    Error 3194: Resolve error 3194 by updating to the latest version of iTunes. "This device is not eligible for the requested build" in the updater logs confirms this is the root of the issue. For more Error 3194 steps see: This device is not eligible for the requested build above.
    http://support.apple.com/kb/TS3694#error3194

  • How can i update my ipod touch to 4.3.3 it always come out with 3194 error

    i can't update my ipod touch ios from 4.1 to 4.3.3 i don't know why i already try every method i can like turn to DFU mode and then restore or rn the itune as administrator but it still can't it always show the 3194 error i have no idea now what to do with it. So anyone who got the same problem help me please. Thank a lot. Hope some one will help me how to get throught this soon. I use Windows7 as a computer OS and the newest version of itune though.

    Step 1 – Open the Terminal.app
    Either by start typing Terminal on the Spotlight, or by going into Applications -> Utilities -> Terminal.
    Step 2 – Open the hosts file
    Open the hosts by typing on the Terminal that you have just opened:
    view source
    print?
    1
    $ sudo nano /private/etc/hosts
    Type your user password when prompted.
    Step 3 – Edit the hosts file
    By deleting
    #74.208.10.249 gs.apple.com
    #127.0.0.1 gs.apple.com
    from your hosts file, save close and then reboot.
    Or in Windows:
    Navigate to C:\Windows\System32\drivers\etc, open hosts file in notepad and remove
    #74.208.10.249 gs.apple.com
    #127.0.0.1 gs.apple.com
    Save it and then reboot.

  • 3194 error while updating, Secure Link to iTunes Store Failed, No Audio CD Found

    Microsoft Windows 7 Ultimate Edition (Build 7600)
    LENOVO 20060
    iTunes 10.7.0.21
    QuickTime not available
    FairPlay 2.2.19
    Apple Application Support 2.2.2
    iPod Updater Library 10.0d2
    CD Driver 2.2.3.0
    CD Driver DLL 2.1.3.1
    Apple Mobile Device 6.0.0.59
    Apple Mobile Device Driver 1.62.0.0
    Bonjour 3.0.0.10 (333.10)
    Gracenote SDK 1.9.6.502
    Gracenote MusicID 1.9.6.115
    Gracenote Submit 1.9.6.143
    Gracenote DSP 1.9.6.45
    iTunes Serial Number 0021AD5C0CB4E590
    Current user is an administrator.
    The current local date and time is 2012-10-21 19:54:53.
    iTunes is not running in safe mode.
    WebKit accelerated compositing is enabled.
    HDCP is supported.
    Core Media is supported.
    Video Display Information
    Intel Corporation, Intel(R) HD Graphics
    **** External Plug-ins Information ****
    No external plug-ins installed.
    **** Network Connectivity Tests ****
    Network Adapter Information
    Adapter Name:    {1AD46418-B495-4CAD-9306-A2618C2232F1}
    Description:    MBlaze USB Modem
    IP Address:    116.202.189.231
    Subnet Mask:    255.255.255.255
    Default Gateway:    0.0.0.0
    DHCP Enabled:    No
    DHCP Server:   
    Lease Obtained:    Thu Jan 01 05:30:00 1970
    Lease Expires:    Thu Jan 01 05:30:00 1970
    DNS Servers:    10.228.65.114
            116.202.225.32
    Adapter Name:    {B07E2D28-A979-4D44-B2C6-99976836038C}
    Description:    Microsoft Virtual WiFi Miniport Adapter
    IP Address:    0.0.0.0
    Subnet Mask:    0.0.0.0
    Default Gateway:    0.0.0.0
    DHCP Enabled:    Yes
    DHCP Server:   
    Lease Obtained:    Thu Jan 01 05:30:00 1970
    Lease Expires:    Thu Jan 01 05:30:00 1970
    DNS Servers:   
    Adapter Name:    {DDBDA14A-F067-44FA-B614-75C87B94AC17}
    Description:    Atheros AR9285 Wireless Network Adapter
    IP Address:    0.0.0.0
    Subnet Mask:    0.0.0.0
    Default Gateway:    0.0.0.0
    DHCP Enabled:    Yes
    DHCP Server:   
    Lease Obtained:    Thu Jan 01 05:30:00 1970
    Lease Expires:    Thu Jan 01 05:30:00 1970
    DNS Servers:   
    Adapter Name:    {9AD087AB-E670-48E2-8A24-A53AE3FC7E2A}
    Description:    Realtek RTL8102E/RTL8103E Family PCI-E Fast Ethernet NIC (NDIS 6.20)
    IP Address:    0.0.0.0
    Subnet Mask:    0.0.0.0
    Default Gateway:    0.0.0.0
    DHCP Enabled:    Yes
    DHCP Server:   
    Lease Obtained:    Thu Jan 01 05:30:00 1970
    Lease Expires:    Thu Jan 01 05:30:00 1970
    DNS Servers:   
    Active Connection:    MBlaze USB Modem
    Connected:    Yes
    Online:        Yes
    Using Modem:    Yes
    Using LAN:    No
    Using Proxy:    No
    Firewall Information
    Windows Firewall is off.
    Connection attempt to Apple web site was successful.
    Connection attempt to browsing iTunes Store was successful.
    Connection attempt to purchasing from iTunes Store was successful.
    Connection attempt to iPhone activation server was successful.
    Connection attempt to firmware update server was unsuccessful.
    The network connection timed out.
    Connection attempt to Gracenote server was successful.
    Last successful iTunes Store access was 2012-10-21 19:52:12.
    **** CD/DVD Drive Tests ****
    No drivers in LowerFilters.
    UpperFilters: InCDPass (4.3.12.0), incdrm (4.3.12.0), GEARAspiWDM (2.2.3.0),
    F: HL-DT-ST DVDRAM GT30N, Rev LC01
    Drive is empty.
    **** Device Connectivity Tests ****
    iPodService 10.7.0.21 is currently running.
    iTunesHelper 10.7.0.21 is currently running.
    Apple Mobile Device service 3.3.0.0 is currently running.
    Universal Serial Bus Controllers:
    Intel(R) 5 Series/3400 Series Chipset Family USB Enhanced Host Controller - 3B34.  Device is working properly.
    Intel(R) 5 Series/3400 Series Chipset Family USB Enhanced Host Controller - 3B3C.  Device is working properly.
    No FireWire (IEEE 1394) Host Controller found.
    Connected Device Information:
    LenovoZ560’s iPhone, iPhone 3GS running firmware version 5.1.1
    Serial Number:    86923ZSC3NP
    Most Recent Devices Not Currently Connected:
    iPod nano (3rd Generation) running firmware version 1.0
    Serial Number:    5U735K0XYXX
    **** Device Sync Tests ****
    Sync tests completed successfully.
    Please help me, what to do?
    Message was edited by: dilip_b

    I think its weird that I experienced both the 3194 error code and "secure link to the itunes store failed" diagnostics error on three computers running on different OS (XP, vista and 7), itunes version and connectivity types (wireless and cabled). Could it be possible that there is a problem on Apple's server?
    Are you still there, shintenhouji?
    Perhaps try the following document:
    Apple software on Windows: May see performance issues and blank iTunes Store
    (I've seen a few cases in recent times of this sort of thing being associated with LSP issues.)

  • 3194 error while updating from 4.3.5 to 5.1.1

    i have just downloaded the latest itunes and have successfully downloaded the latest 5.1.1 for ipad 2 but right after sync i get the extracting software msg and after that i get 3194 error. i have even tried reinstalling itunes and rebooting ipad 2 but i have failed to get the thing going. help me

    Try and get your iPad in Recovery Mode
    http://support.apple.com/kb/ht1808

  • TS3694 I cant get my ipad 2 out of recovery. The apple icon stays on and nothing happens. I tried restoring it through Itunes but it comes up with a 3194 error code. I have the latest Itunes being 10.6.1.7 and the latest windows update.Can someone please

    I cant get my ipad 2 out of recovery. The apple icon stays on and nothing happens. I tried restoring it through Itunes but it comes up with a 3194 error code. I have the latest Itunes being 10.6.1.7 and the latest windows update.Can someone please help?

    Recovery Mode
    1. Disconnect the USB cable from the device, but leave the other end of the cable connected to your computer's USB port.
    2. Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the device to turn off.
    3.While pressing and holding the Home button, reconnect the USB cable to the device. The device should turn on.
    4. Continue holding the Home button until you see the "Connect to iTunes" screen. When this screen appears, release the Home button. iTunes should alert you that it has detected a device in recovery mode. Click OK, and then click Restore to restore the device.
    Note: Data will be lost. You may have to repeat the above many times.

  • IPhone 3GS WITH 4.2.1 OS trying to upgrade to 4.3.5 with no success.  Using 10.4 iTunes.  Helps. 3194 error

    Trying to upgrade my 3GS with 4.2.1 OS to 4.3.5 but every time I try I get a 3194 error.  I upgraded my iTunes to 10.4 with no success.  What can I do?

    Time outs in the network connection are mostly caused by the security software in Windows, check the settings on your computer, this article can help: iTunes for Windows: Troubleshooting security software issues

  • Using Disc Utility to copy my hard drive to a brand new external drive and am having the error "Unable to create...(Cannot allocate memory)".

    I'm not very tech savvy but am trying my best to use Disc Utility to copy my hard drive to a brand new external drive and am having the error "Unable to create...(Cannot allocate memory)".
    Last night no problems, woke this morning and it was freezing so I forced a restart and got the grey screen with the folder and question mark. Ran off to best buy to get an external drive... Please help! Thank you!

    I have done both. When I hold down the "C" key it pauses for a few seconds while the cd spins and then the flashing folder icon appears.
    Could be you have the wrong cd/dvd.  The mac will only boot a supported cd/dvd for your machine. The flashing question mark indicdates your machine could not find a valid os.
    When I hold down the "option" key for the startup manager the cursor comes up and moves but the actually manager doesn't come up no matter how long I leave the laptop on.
    Not sure.  Could be your machine does not support the startup manager. You would think the machine would ignore the key.
    Where did you get the dvd?  What is the number on the DVD?
    What machine do you have anyway?
    This site provides more information, but lacks security.
    "A serial number is a unique, identifying number or group of numbers and letters assigned to an individual piece of hardware or software. It's used for various things depending on the product / brand but what is your Mac's serial number for and more importantly... what is it hiding and what can it do for you ?"
    http://www.appleserialnumberinfo.com/Desktop/index.php
    or
    This site provides more information, but lacks security too.
    "A serial number is a unique, identifying number or group of numbers and letters assigned to an individual piece of hardware or software. It's used for various things depending on the product / brand but what is your Mac's serial number for and more importantly... what is it hiding and what can it do for you ?"
    http://www.appleserialnumberinfo.com/Desktop/index.php
    http://www.chipmunk.nl/klantenservice/applemodel.html
        ( hint by K Shaffer  )

  • I tried to install ios7 last night and the screen is now on itunes with the usb symbols  Plugged the ipod into the laptop where itunes is stored.  Tried to restore only to be advised that a 3194 error has occured  cannot get any further please help!!

    Hi  I tried to install ios7 last night and the ipod touch now has a frozen screen with the itunes logo and the usb logo  I plugged the ipod into my laptop and tried to restore only to be met with the message 3194 error  cannot restore this ipod  please help thanks

    Hi. The two user tips both describe a sequence of steps that should get your library from the point where it threatens to wipe data from your device to where it is syncing normally, while recovering as much information as possible. It may still be necessary to wipe and reload the device but this should only take place once all the data that can be recovered has been recovered.
    Doing step 1 of 8 and then complaining things aren't the way you want them to be yet strikes me as premature...
    Since you appear to have all your media content, and we are discussing an iPod classic, not an iOS device, the main worries are already taken care of. What's left is ratings, playcounts, playlist membership and checked status. Since your device holds only part of your library at best you could only recover the missing data for the content that is on the device using third party tools.
    Recreating the previous checked/unchecked status of every track in your library from where you are now may not be that easy. Syncing with selected playlists has many advantages, one of which would have been that you would have a named playlist that could have been retrieved by 3rd party software if you had used this method.
    You haven't explained what caused your problem in the first place, but if you have a Previous iTunes Libraries folder holding old copies of your iTunes database (generated with each iTunes update) then it would be possible to restore the most recent of these and then update the library with any changes in your media folder.
    BTW Apple doesn't offer free support for this kind of issue with iTunes.
    tt2

  • Is anyone else having Config error 16 issue when trying to start PSE 12 or Premier Elements after Mac upgrade to Yosemite 10.10 on iMac

    Is anyone else having Config error 16 issue when trying to start PSE 12 or Premier Elements 12 after the Mac upgrade to OS X Yosemite 10.10 on iMac. I have had a number of issues with software and things after upgrading to OS X Yosemite 10.10 and even 10.10.1.  I have uninstalled and reinstalled both PSE 12 and Premier Elements 12 a number of times and everything goes fine until its ready to launch and then you get an error message. Numerous uninstalled and reinstalls don't removing the problem.  Strangely enough  PSE 11 still appears to boot up and I never owned Premier Elements 11 so I don't know if it will start. I thought with Apple dropping its Apeture software and greater integration of iPhoto and Apeture files into Lightroom 5.7 all would be harmonious between these two players. Im not sure where Adobe wants us to go it recently removed the plugin to allow you to update files from LR to Adobe Revel, whats up with that. I now own two version of Adobe software that no longer work with my Mac and now way of uploading pictures from Lightroom to Revel. Needless to say I am pretty reluctant to sign on to a subscription of Creative Cloud with long term financial obligations when I can't even get my current Adobe software to work independently much less integrate with Lightroom. Frustrated with it all!

    Get rid of 'put disks to sleep when possible' and you may see a dramatic improvement (not necessarily a cure).
    That specific problem is a multiple-Processor (including graphics processor) problem, where one of the processors lost track of whether it should be responding to interrupts. You may have a Hardware problem.

  • HT1848 I cannot authorize my computer, I'm having this error message The required file was not found or has a permissions error. Correct this permissions problem and try again, or deauthorize this computer if the permissions cannot be changed." please hel

    cannot authorize my computer, I'm having this error message The required file was not found or has a permissions error. Correct this permissions problem and try again, or deauthorize this computer if the permissions cannot be changed." please help me

    Doublechecking. In the course of your troubleshooting to date, have you worked through the instructions from the following document?
    iTunes: Missing folder or incorrect permissions may prevent authorization

  • TS1591 My iphone 4 randmonly started going into recoveery mode when i was trying to download ios 7.1, and now the apple logo will come one and then fade to black and continue this process. My iphone wont restore either and will get the 3194 error message.

    My iphone 4 randmonly started going into recoveery mode when i was trying to download ios 7.1, and now the apple logo will come one and then fade to black and continue this process. My iphone wont restore either and will get the 3194 error message.Help please!

    Hello chindeepchow,
    Thank you for using Apple Support Communities.
    For more information, take a look at:
    Resolve specific iTunes update and restore errors
    http://support.apple.com/kb/ts3694#3000
    Resolve communication issues
    Related errors: 17, 1004, 1013, 1638, 3014, 3194, 3000, 3002, 3004, 3013, 3014, 3015, 3194, or 3200. These alerts refer to gs.apple.com, say "There was a problem downloading the software," or say the "device isn't eligible for the requested build."
    Check the hosts file or TCP/IP filtering, which might cause communication issues between iTunes, ports, and servers.
    Have a nice day,
    Mario

  • TS3694 when i m trying to downgrade my iphone 4s from ios 6.0 to 5.1, i have 3194 error. How can i fix that problem.

    when i m trying to downgrade my iphone 4s from ios 6.0 to 5.1, i have 3194 error. How can i fix that problem.

    Downgrading to an earlier iOS version is not supported by Apple. You will get no help with this direct from Apple or here.

Maybe you are looking for

  • HT4108 iphone4 to digital TV.  Audio but no video.

    I have connected my iPhone 4 to digital TV with HDMI lead and an Apple 30-pin digital AV adapter. Audio can be heard through the TV but there is no video on the screen. Any ideas?

  • Backend system for SRM7.0

    Hi Experts, Now my requirement is  upgrade SRM3.0 to SRM7.0. the thing is currently we are using R/34.6C as a backend system for SRM3.0. now the query is can i go ahead with the upgrade with R/34.6C itself or else i need to upgrade the backend system

  • HT201436 Any other users of iPhone 5 getting feedback on calls?

    There is feedback (like the noise following a vibration) when making calls, even when I've turned the volume down. I've reset the phone a couple of times.

  • Php help please

    New to all this and have been following a tute on youtube, the tute is using CS3 but I am using CS6 and this has arrisen: Can someone please point me in the right direction to fixing this issue? Cheers J

  • [solved] No sound -- but apps *pretend* to play...

    No sound comes out of my speakers, but my apps (audacious, mplayer, aplay) pretend that they're playing (I get no warning/error messages)... even though nothing's coming out. I have tried: amixer set Master 90% unmute amixer set PCM 85% unmute as wel