Having a big problem with my 6 day old macbook, please help!

My macbook was working fine, I haven't had much of a chance to install the hardware that came with it until tonight though. I was starting to install the first disk that came with my macbook, when I saw that it would take over 3 hours to install. SInce I need to go to bed early I decided to cancel and figured I could start tomorrow after work.
Well, I turned my mac back on to see if it was still alright, and my mac hd is missing off the desktop, it doesn't even show the main toolbar/taskbar that's across the top of the screen unless I'm in safari. A message keeps coming up that says spotlight quit unexpectedly. I tried hitting all three options (ignore, report, and restart) different times and the window still keeps coming up.
I put the disk back in my computer to see if I could just start to install it again but the computer isn't even recognizing that there is a disk in there.
PLEASE HELP ME!! This is a brand new computer and I can't afford for it to break.

I hope you invested in AppleCare. It extends your warranty for three years and also gives you three years of phone support. MacBooks come ready to use, as far as I know. The discs that come with it contain software, not "hardware" are provided in case of problems. Take your MacBook back to the Applestore and they will take care of the problem. If it is unfixable, they will replace your MacBook, but you only have fifteen days, after which, they will repair your MacBook, but not replace it (unless it is totally FUBAR) Your sales person should have explained all this to you. Good Luck, and welcome to Mac world.

Similar Messages

Hi Apple! I am having a few problems with my 6 month old iPad mini (ios 7.1.1). I am using my iPad and then some time later it just restars! Don't know why and it just keeps doing it! Please fix or if I restore my iPad will it do any good? Thank you

Hi Apple! I am having a few problems with my 6 month old iPad mini (ios 7.1.1). I am using my iPad and then some time later it just restars! Don't know why and it just keeps doing it! Please fix or if I restore my iPad will it do any good? Thank you

Plug your iPad into your computer, open iTunes, and click Restore. This will reset your iPad to factory settings, so make sure everything important is stored safely. Once the restore is complete, do NOT restore from your backup.
If you still have problems, take the iPad to the Apple Store or another AASP (Apple Authorised Service Provider). If you're still within warranty, any service will be of no cost. Check your serial number here or find your receipt.
Hope I've helped!
PS: This is a peer-to-peer forum. Apple generally doesn't pay attention here.

Hello, i have a problem with this number code 213:19, please help me!

Hello, i have a problem with this number code 213:19, please help me!

dan
What version of Premiere Elements and on what computer operating system is it running?
If you are using Premiere Elements 13, have you updated it to 13.1 yet? If not, please do so using an opened project's Help Menu/Updates.
What type of user account are you using....local administrator or domain type?
Please review the following Adobe document on the 213.19 issue. Have you read that already?
Error 213:19 | Problem has occurred with the licensing of this product
ATR

Please help!!!!!!!! I am having a big problem with my mac

This is the whole story that has been going on. I posted yesterday and Ray told me to repost and see if someone else can help. Please dont know what to try next.
Problem with my Imac
Posted: Dec 27, 2007 7:01 AM
Click to reply to this topic Reply email Email
Ive been having a problem with my Imac 10.4. I believe that when my computer was doing the last update someone manually shut it down since then i havent been able to get into my hardrive to start up my computer. I brought it into the apple store the guy at the genius bar told me that he couldnt locate my hard drive and i would have to get a new one. I didnt purchase the new one I went home to see if i can resolve it on my own. I went out and bought a external hard drive and bought a program to fix the hard drive. So now the hard drive pops up on my computer and im able to get into it and i backed up most of my information on to the new hard drive. If now that i can see the hard drive is there any way to repair it so i can start using my computer normally again? Please help
Re: Problem with my Imac
Posted: Dec 27, 2007 7:06 AM in response to: Shelomo
Click to reply to this topic Reply email Email
In utilities there's disk utility, find your HD, the one you want repaired and run the repair permissions program.
Ray
Posts: 12
From: New Jersey
Registered: Dec 27, 2007
Re: Problem with my Imac
Posted: Dec 27, 2007 7:11 AM in response to: smithrj
Click to reply to this topic Reply email Email
I already tried that but I read somewhere else to try that a couple of times. Can you tell me what i should try after that?
Shelomo
Posts: 317
From: Syracuse, New York
Registered: Jul 13, 2007
Re: Problem with my Imac
Posted: Dec 27, 2007 7:18 AM in response to: Shelomo
Click to reply to this topic Reply email Email
What's left to do? Does the permissions tell you your HD is OK? Be more specific in what you want to do, I don't understand Shelomo. Post what it is you want done. Because there are many 3rd part applications that may solve your problem.
Cheers,
Ray
MacBook 2GB Intel Mac OS X (10.4.11) iMac 2Gb 2.8GHz 500 w/ 10.4.11 iPod shuffle 1 GB
Shelomo
Posts: 12
From: New Jersey
Registered: Dec 27, 2007
Re: Problem with my Imac
Posted: Dec 27, 2007 7:22 AM in response to: smithrj
Click to reply to this topic Reply email Email
I ran repair disk first and it said that there was an underlining error, and i did that before i ran permissions. Will it work after the permissions is finished running?
imac 20" Mac OS X (10.4)
smithrj
Posts: 317
From: Syracuse, New York
Registered: Jul 13, 2007
Re: Problem with my Imac
Posted: Dec 27, 2007 7:42 AM in response to: Shelomo
Click to reply to this topic Reply email Email
Repair permissions, if it tells you OK, your OK. No more to do.
Hope all goes well,
Ray
MacBook 2GB Intel Mac OS X (10.4.11) iMac 2Gb 2.8GHz 500 w/ 10.4.11 iPod shuffle 1 GB
Shelomo
Re: Problem with my Imac
Posted: Dec 27, 2007 8:18 AM in response to: smithrj
Click to reply to this topic Reply email Email
ok, when it finishes repairing can i send another message to you if this doesn't work maybe you might have another idea what to try? Thanx again
imac 20" Mac OS X (10.4)
smithrj
Shelomo
Posts: 12
From: New Jersey
Registered: Dec 27, 2007
Hi, ok so it finished running the reapir permissions and that came out ok, when I ran repair disk we got errors and the errors said ivalid record count, volume check failed, the underlying task reported failure on exit, 1 volume could not be repaired because of an error. Do you have any idea what I can try now. I really dont want to have to get a new hard drive put into my computer. Thank you
Shelomo
imac 20" Mac OS X (10.4)
smithrj
Posts: 317
From: Syracuse, New York
Registered: Jul 13, 2007
Re: Problem with my Imac
Posted: Dec 28, 2007 5:37 AM in response to: Shelomo
Click to reply to this topic Reply email Email
Shelomo, I don't know. Post the whole report using cut and paste and someone will jump in and help figure this out.
OK
Ray
SOMEONE PLEASE HELP ME!!!!!! Thank you very much
Shelomo

What program did you use to fix the internal hard drive? What repairs did it report making? More crucially, if repairs were reported, did you re-run the utility until it reported no problems found? It's possible for one set of problems with a drive to mask others.
If you have about 5GB or so free space on the internal hard drive, you can use your OS X Install disc to perform an Archive and Install to recover from the failed Software Update. When the computer restarts, download and run the OS X Update Combo 10.4.11 (Universal). When the Mac restarts after that, run Software Update. During all this, make sure nothing interrupts or shuts down the Mac! Note that the first start after each of these updates will take significantly longer than subsequent starts, so be very patient.
How did you back up your internal drive to the external one? Did you just drag things over in the Finder, or did you use a utility such as SuperDuper! or CarbonCopyCloner? Does the external HD show up as a bootable volume in System Preferences > Startup Disk, or using Startup Manager?

I am having problems with my 9 days old z1

Sir/madam
I am facing so many problem in my z1 which i bought 9 days ago from sony center problem is that whenever i open my album or walkman i see so many lines and clearaudio+ and sound effect is not working and some times song stops itself and also facing battery issue 100% drains in 6 hours please help me to get rid of from these graphic glitches and flickering problems flick very little bit and i am sorry for this english

They are not known issues so i'm afraid it's hard to say. Songs that stops and battery drain may be caused by a defect SD card which is why i asked you try try without it.
Could you also try the phone in safe mode to make sure it's not caused by a downloaded app? To restart in safe mode, hold the on/off button and then tap and hold the shutdown option.
If you also see this in safe mode i'm afraid there might be a hardware issue in your phone and i recommend that you contact your local support team for assistance.
- Official Sony Xperia Support Staff
If you're new to our forums make sure that you have read our Discussion guidelines.
If you want to get in touch with the local support team for your country please visit our contact page.

Big problem with new WD Caviar Green HDD, please advise!

I bought a new Western Digital Caviar Green HDD 1TB, ( WD10EADS ) it is a SATA 3Gb/s interface HDD, 3.5-inch form factor. the RPM = IntelliPower (NOT 7200 RPM or 5400 RPM which means Rotate automatically depends on the needs of fetching data I suppose?)
I acknowledged that this series of HDD which three of 6 have the same Power Management which Read/Write = 4.9W / Idle = 2.8W / Standby = 0.4 W / Sleep = 0.4W
They are differ from the other 3, which 500GB one is 4.1W / 2.2W / 0.8W / 0.8W and 1.5TB is 4.73W 2.75W / 0.72W / 0.72W; 2TB is 6W 3.7W 0.8W 0.8W
Which mean the Standby and Sleep mode are the same state.
Now my big problem is, I bought an external dock SI-7908UI for this WD Caviar Green HDD.
( http://www.ssi.com.tw/product_content.aspx?id=92 )
So I first put the HDD into the SI-7908UI Dock ( USB 2.0 / eSATA / Firewire 400 /800 )
I tried many way of sequence of who power on first? WD Caviar Power on first? or Mac mini Power on first? I found that the best way is Mac mini Power on first, then Power on the external HDD.
OK, before I address my big problem, I should let you know, I found that there is NO S.M.A.R.T. working when you put a S.M.A.R.T. HDD outside the Mac or PC. In Dock, the S.M.A.R.T. won't work, That's how I saw in System Profiler, the FireWire tab says " S.M.A.R.T. status: Not Supported "
and I did test a Non-Green Maxtor HDD, the S.M.A.R.T. doesn't show either. You'll need this info before the real problem I'm gonna say in the following.
NOW, about 10~15 minutes after my Mac mini boot, if I didn't fetch anything from my external HDD, it would goes to sleep itself, that confirmed that the Specification Sheet was true, the Idle = 2.8W and I believe it goes to Idle, NOT Standby or Sleep, which I also believe the Standby or Sleep signal is supposed to be given by Mac OS, but it sounds like Standby or Sleep, BECAUSE the WD HDD suddenly not rotate and the sound it appears that it goes to SLEEP, am I right? I keep Mac awake by browsing the web so Mac mini won't go to sleep (I set 10 minutes in Energy Saver and I checked Put the HDD to sleep when possible)
Well, That is my big problem when WD Green HDD goes to sleep, because I CAN'T wake it up, NOT eject or Shut down the Mac mini. (OK, I'm NOT sure if it goes to Sleep or Idle)
First I thought it freezes the whole Mac OS, then I found I still can move many things, such as I am doing right now, post this big problem here. but I am sure the others are freeze! and no matter how many time I click Shut Down or Restart or Force Quit, the Mac mini didn't respond.
I tried to figure it out because I don't want to Shut Down by force.(5 seconds Press the Power button)
then I found that if I power down the external dock 7908-UI when Mac fail to shut down/restart/or eject the external HDD, It worked.
And the Mac OS will appear a window says that "I shouldn't unplug an external device without Ejecting it first" something like that. and suddenly it shuts down very quickly, everything back to normal, it shut down successfully.
What am I gonna do with this? Am I going to power down my external HDD first every time I want to shut down/eject/restart? Because the Eject the external HDD will cause freeze too! Freeze Finder I suppose.
Is it caused by 7908-UI ? or Caused by WD Caviar's Green Power management?
Because I don't trust 7908-UI, it doesn't look like a trusted brand, I've never heard of this SSI company anyway.
What am I gonna do? Please advise.
Thanks in advance.

Please realise that I am not the right person to be asking. I pointed you to a thread where, as a Moderator at the Bombich forums, I felt the need to warn users of CCC that a WD drive might cause problems. The thread mainly just copies what WD have said.
Obviously your drive will respond/awake/spin up when you access it manually. Some of the problems are...
•  Most users want to be in control of whether and/or when a drive sleeps -- WD's auto-sleep cannot be disabled and so precludes that.
•  Most users want their drive to obey settings in Energy Saver -- the WD auto-sleep mechanism doesn't allow that.
•  Most users want a scheduled cloning/backup to take place during the night. The cloning app starting the backup process should cause the target drive, if sleeping, to wake/spin up so that the process can take place -- it does for all drives except WD drives where the auto-sleep mechanism used doesn't allow it. LaCie drives, for instance, have auto-sleep +as an option+, during which the drive will respond to Energy Saver settings and to software such as a cloning app.
Please, Mauricette, put you questions/concerns/problems to the reseller or to WD, both of whom took your money without warning you. I am NOT a WD expert! ...or lover! ( ) I became more than disenchanted when I saw that a) WD do not point out the limitations of their external drives at point of sale, and b) WD put the blame for these inadequacies/problems/limitations onto Apple, ignoring the fact that no drives other than WD drives have them.
Andreas

HT1414 I am having a problem with a black screen.. Please HELP

I am having black screen issues. Have tried all the resets and no luck. I hear it but cant see anything. I called support and they said pay more money for it to get resolved. I cant see paying money for something i dont ffeel i caused. I left it charging and went out for several hours and came back to a black screen now its gonna cost 149.99 for telephone support that may or may not resolve the issue. Funny the first time I called them it started working again andthe price to get support at that time was 119.99 then they proceeded argue with me that it was not fixed and i would have to pay them to fix it. The darn thing is only 8 months old never been scratched dropped or abused in any way. Someone please help me get his apple ipad working for my daughter. This is her fun she doesnt do much else and i cant seem to figure out what is wrong with it...It is still under warranty and they say just to send it in is going to cost 99.99. I feel im being taken advantage of by the support comapny apple uses....
Thanks for any feedback
Mindy J

After selecting the Crop Tool you should see a little icon in the Options bar that allows you to select what kind of grid overlay you'd like while cropping, along with some options that define when to show it...
-Noel

Having problems with HP6980 printer and Windows 7, please help

I just replaced my XP computer with a new HP computer running Windows 7. Each time I turn on my HP 6980 printer, it won't print. When I go to Devices and Printers, I see that it is offline. I have to delete the printer and reinstall it to make it work and this solution is only good for the session. I have to repeat the process each time that I turn on the computer. Please help.

Try running this next time you get the issue:
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=mp-91788-1&lc=en&dlc=en&cc=us&...
This should fix the offline issue instead of reinstalling.
I work for HP but my posts and replies are my own thoughts.
If I have solved your issue, please feel free to provide kudos
Make it easier for other people to find solutions, by marking my answer with Accept as Solution if it solves your issue.

Multiple Problems with 5.5 month old MacBook

Okay. I've had my MacBook since March 3rd of this year. I have a few problems with it. It's the 2GHz model with a "SuperDrive", 1GB of RAM and a 160GB HDD I added myself. I added it in May, well after my problems had begun.
My first problem is that the keyboard squeaks. This started about a week after I bought it. The spacebar and "Enter" keys begin to squeak after about 20 minutes or so of use.
The second problem is that the palm rest has been showing some discoloration, but not very noticeable.
Now for the real hardware problems.
First up, this problem is very random, sometimes the system will not boot right away. I mean, I'll press the power button and the screen will flicker. The little sleep/power light will come on and then nothing will happen for about 20 or 30 seconds. After that, the screen will light up and the sound will play and everything will work fine. Sometimes I will press the power button and nothing will happen. I have tried everything suggested in the help topics at this site and nothing has helped.
The second problem is that, occasionally, my iPods will act as if they are connecting to nothing. It only happened with my 80GB iPod. But tonight it happened with my 2G 4GB iPod mini. Both using different cables. This started tonight after experiencing the problem I mentioned above. The last time I had an iPod act like it was connected to nothing was right before the motherboard in that particular computer died.
So those two problems right there make me believe I have a faulty motherboard.
My third problem is with the "SuperDrive". Lately it has been having problems reading discs. Randomly, I will insert a disc and it will spin it.. then spit it back out. Again, randomly, it will sometimes take 3 or 4 tries before it will finally read the disc. I can try that same disc again a few days later and I will read it no problem. This happens with professionally pressed (store bought) discs and burned discs as well. Which leads me to the next issue with the optical drive. It can write CDs fine. But DVDs are another story. Any brand of disc from any manufacturer has the same result. This happens in Windows and OS X with a variety of software, including OS X's built-in software. I cannot burn a disc successfully over 2x. If I try to burn a disc over 2x, even at 4x, it fails. What happens is that, when the burn starts, it will spin the disc at 2x while burning for about the first 10% or so. Then it will spin up to full speed. If the disc is a video, after that point (which usually translates into about 15 minutes in with a 2 hour video), the movie will skip and stutter randomly on every DVD player I try to play the disc on. If it is data, more often than not, the disc will not successfully pass the verification process. If it does pass, only the "SuperDrive" will be able to read it and nothing else will. And usually when it does pass, if I am present for the entire verification process, I can hear the disc being spun up and down at varying speeds so it can read it.
The last time I had that happen was with a bad drive that failed at around the 6 month mark. My first DVD writer, so I didn't know then that it was the sign of a dead/dying/bad device.
The final problem has to do with the hinge on the screen. I'm sure anyone reading this is aware of how the MacBook opens. Well, on the rounded plastic on the hinge, that goes directly into the path of the exhaust fan when the screen is open.... the plastic is starting to slightly bubble and come part. It has also slightly changed color.
Now I really don't know what to do. I don't have a credit card, so if I call Apple Care I will have to argue with them to listen to my problems because they are not software related and, based on what I've read, they require a CC number to proceed with any help.
And the closest Apple Store is a 75 mile round trip away, so it is not reasonable to drive there. I also cannot drive there and leave the system there because I have no other computer until the middle of next week.
So, any advice would be great. Thanks.

I'm definitely going to call.
However, its definitely not the hard drive causing the issues. The problems began before the drive upgrade and continued afterwards.
Besides, the discoloring plastic, iPods acting as if they're connected to nothing, and the DVD burner not being able to burn discs have nothing to do with the installed hard drive.
Neither would the random booting issues. If the hard drive was causing an issue, the system simply wouldn't boot.
I built many PCs before buying my Mac and had a couple of Windows laptops as well. I know enough about hardware to know that the problems I'm having now are completely unrelated to the drive upgrade.
I also live in California and I'm very aware of the consumer protection laws here as I had to research them and bring them up against HP when the motherboard in my HP system died. So I'm the last person they will be able to push around

Problem with I-Trigue 3400 (static)! Please help!

Alright, I bought my first set of I-Trigue 3400s about 2 weeks ago. Less than a few hours after using them, static started to come through the right speaker. This would happen intermittently for the next 2 days before I decided to exchange them. I was told it must of been a manufacturing defect and not to worry.
Well, I got a 2nd set of the I-Trigues to replace my first set. Everything has been swell for the past 2 weeks until last night. Last night and today I am once again getting static over my speakers. I tried fiddeling with the wires thinking it might be a loose connection and I also tried shutting off my computer and any nearby electronic devices. Unfortunately, none of my attempts have resolved the issue. This time the static is coming out of both speakers, although it is really bad and loud with the right speaker. I tried switching the left/right plugs around for the speakers, and this just made the louder static come out of the left speaker instead of the right one..
PLEASE HELP! My speakers haven't even lasted me two weeks!! And this is the 2nd set of 3400s I buy!!!!
btw, I've already sent for my rebate, so I don't think I can exchange my speakers for the THIRD time!

Hey! I've got the same problem with the same kind of speakers! When im listening to something volume is coming down and after a some time its coming back to its previous level! Coming back to its normal level can be forced by turning the speakers on and off! thats all i've discovered...
i also heard that some of creative speakers have kind of (f**k i dont know the word in english :P ) which works like that: when subwoofer is hot it automatially turns the volume lower to save your speakers from burning form hot :P or something like this :P
hmm... what i discovered that is no matter what i connect as source of music! effect of volume is the same
or maby you discovered the reason of this?
ps.
sory for my very unperfect english...

The Kernal Panics Continue... with my 3 day old Macbook

PLEASE HELP! Bought my first Macbook in Oct 2010; it started kernal panicking every other day in Dec 2010 when I would wake it up. Last Thursday and Friday (1/20/11 & 1/21/11) took it to the Apple Northridge store to have it fixed~ we wiped off all software, did a system restart, re-seated the ram, ran a 24-hour stress test and it was still kernal panicking. On Monday (1/24/11) the genius bar gave me a brand new Macbook, right out of the box. The only thing they didn't give me was a new power cord. My new Macbook has been working great for the past 3 days, until this morning, when I opened it up and received a kernal panic. How is it that 2 new Macbooks (my first one was only 3 months old) are both kernal panicking??? Someone please shed light~ these are my first experiences with Apple and I really want to love them but... my Toshiba never gave me problems like this.

Jay, thanks for getting back to me. I am getting a panic log, please see below. I haven't downloaded any apps, either from Apple or third-party, and I'm not using any third-party devices. The only download I've made is from Flip.com to upload my flip-videos to. I appreciate any and all suggestions you have. Thanks again
Interval Since Last Panic Report: 38732 sec
Panics Since Last Report: 1
Anonymous UUID: 82962184-753C-4BBF-8C31-A681729DD85B
Thu Jan 27 07:02:39 2011
panic(cpu 0 caller 0x2aab55): Kernel trap at 0x0027c58e, type 14=page fault, registers:
CR0: 0x80010033, CR2: 0x00000004, CR3: 0x03dbc000, CR4: 0x00000668
EAX: 0x0222f288, EBX: 0x0456920c, ECX: 0x04569204, EDX: 0x00000000
CR2: 0x00000004, EBP: 0x560fba08, ESI: 0x04569200, EDI: 0x026442b4
EFL: 0x00010202, EIP: 0x0027c58e, CS: 0x00000008, DS: 0x26100010
Error code: 0x00000002
Backtrace (CPU 0), Frame : Return Address (4 potential args on stack)
0x560fb7f8 : 0x21b50c (0x5d4438 0x560fb82c 0x223974 0x0)
0x560fb848 : 0x2aab55 (0x59623c 0x27c58e 0xe 0x596406)
0x560fb928 : 0x2a09a8 (0x560fb940 0x2f9504 0x560fba08 0x27c58e)
0x560fb938 : 0x27c58e (0xe 0x48 0x820010 0x2c030010)
0x560fba08 : 0x254fac (0x26442b4 0x235d1000 0x0 0x2610d)
0x560fba78 : 0x257f93 (0x26442b4 0x84b7a0 0x235d1000 0x0)
0x560fbbc8 : 0x2594d0 (0x1a5dcd0 0x235d1000 0x0 0x0)
0x560fbc88 : 0x264aa5 (0x1a5dcd0 0x560fbd2c 0x84b7a0 0x235d1000)
0x560fbd98 : 0x217bca (0x235d2000 0x0 0x3 0x0)
0x560fbe18 : 0x2410b0 (0x3e71e8c 0xe03 0xb2d17a0 0xb2d17b8)
0x560fbe58 : 0x21d8ba (0x4b5b898 0xb2d1784 0x1ff058 0x103)
0x560fbe98 : 0x210a3a (0x4b5b800 0x0 0x4391620 0x4392c00)
0x560fbef8 : 0x216c9d (0x4b5b800 0x0 0x0 0x0)
0x560fbf78 : 0x295156 (0x3ed32e8 0x0 0x0 0x0)
0x560fbfc8 : 0x2a148d (0x3ed32e4 0x0 0x10 0x627d824)
BSD process name corresponding to current thread: launchd
Mac OS version:
10J567
Kernel version:
Darwin Kernel Version 10.6.0: Wed Nov 10 18:13:17 PST 2010; root:xnu-1504.9.26~3/RELEASE_I386
System model name: MacBook7,1 (Mac-F22C89C8)
System uptime in nanoseconds: 43021883995116
unloaded kexts:
com.apple.driver.AppleMCP89RootPortPM 1.11 (addr 0x300b0000, size 0x20480) - last unloaded 124213222755
loaded kexts:
com.apple.driver.AppleHWSensor 1.9.3d0 - last loaded 53063848058
com.apple.driver.AGPM 100.12.19
com.apple.driver.AudioAUUC 1.13
com.apple.driver.AppleMikeyHIDDriver 1.2.0
com.apple.driver.AppleIntelPenrynProfile 17
com.apple.DontSteal_Mac_OSX 7.0.0
com.apple.driver.AppleMikeyDriver 1.9.9f12
com.apple.driver.AppleUpstreamUserClient 3.4.5
com.apple.driver.AppleHDA 1.9.9f12
com.apple.driver.AudioIPCDriver 1.1.6
com.apple.driver.AppleMCCSControl 1.0.17
com.apple.nvenet 2.0.15
com.apple.driver.AppleBacklight 170.0.34
com.apple.driver.SMCMotionSensor 3.0.0d4
com.apple.driver.AirPortBrcm43224 426.36.1
com.apple.driver.ACPISMCPlatformPlugin 4.5.0d5
com.apple.driver.AppleLPC 1.4.12
com.apple.GeForce 6.2.6
com.apple.filesystems.autofs 2.1.0
com.apple.driver.AppleUSBTCButtons 200.3.2
com.apple.driver.AppleUSBTCKeyboard 200.3.2
com.apple.iokit.SCSITaskUserClient 2.6.5
com.apple.BootCache 31
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1
com.apple.iokit.IOAHCIBlockStorage 1.6.3
com.apple.driver.AppleUSBHub 4.1.7
com.apple.driver.AppleAHCIPort 2.1.5
com.apple.driver.AppleUSBEHCI 4.1.7
com.apple.driver.AppleUSBOHCI 4.1.5
com.apple.driver.AppleEFINVRAM 1.4.0
com.apple.driver.AppleRTC 1.3.1
com.apple.driver.AppleHPET 1.5
com.apple.driver.AppleSmartBatteryManager 160.0.0
com.apple.driver.AppleACPIButtons 1.3.5
com.apple.driver.AppleSMBIOS 1.6
com.apple.driver.AppleACPIEC 1.3.5
com.apple.driver.AppleAPIC 1.4
com.apple.driver.AppleIntelCPUPowerManagementClient 105.13.0
com.apple.security.sandbox 1
com.apple.security.quarantine 0
com.apple.nke.applicationfirewall 2.1.11
com.apple.driver.AppleIntelCPUPowerManagement 105.13.0
com.apple.driver.AppleProfileReadCounterAction 17
com.apple.driver.AppleProfileTimestampAction 10
com.apple.driver.AppleProfileThreadInfoAction 14
com.apple.driver.AppleProfileRegisterStateAction 10
com.apple.driver.AppleProfileKEventAction 10
com.apple.driver.AppleProfileCallstackAction 20
com.apple.iokit.IOSurface 74.2
com.apple.iokit.IOBluetoothSerialManager 2.3.8f7
com.apple.iokit.IOSerialFamily 10.0.3
com.apple.driver.DspFuncLib 1.9.9f12
com.apple.iokit.IOAudioFamily 1.8.0fc1
com.apple.kext.OSvKernDSPLib 1.3
com.apple.driver.AppleSMBusController 1.0.8d0
com.apple.driver.AppleHDAController 1.9.9f12
com.apple.iokit.IOHDAFamily 1.9.9f12
com.apple.iokit.AppleProfileFamily 41
com.apple.iokit.IO80211Family 312
com.apple.iokit.IONetworkingFamily 1.10
com.apple.driver.NVSMU 2.2.7
com.apple.driver.AppleSMC 3.1.0d3
com.apple.driver.IOPlatformPluginFamily 4.5.0d5
com.apple.driver.AppleSMBusPCI 1.0.8d0
com.apple.nvidia.nv50hal 6.2.6
com.apple.NVDAResman 6.2.6
com.apple.iokit.IONDRVSupport 2.2
com.apple.iokit.IOGraphicsFamily 2.2
com.apple.driver.BroadcomUSBBluetoothHCIController 2.3.8f7
com.apple.driver.AppleUSBBluetoothHCIController 2.3.8f7
com.apple.iokit.IOBluetoothFamily 2.3.8f7
com.apple.driver.AppleUSBMultitouch 206.6
com.apple.iokit.IOUSBHIDDriver 4.1.5
com.apple.driver.AppleUSBMergeNub 4.1.5
com.apple.driver.AppleUSBComposite 3.9.0
com.apple.iokit.IOSCSIMultimediaCommandsDevice 2.6.5
com.apple.iokit.IOBDStorageFamily 1.6
com.apple.iokit.IODVDStorageFamily 1.6
com.apple.iokit.IOCDStorageFamily 1.6
com.apple.driver.XsanFilter 402.1
com.apple.iokit.IOAHCISerialATAPI 1.2.5
com.apple.iokit.IOSCSIArchitectureModelFamily 2.6.5
com.apple.iokit.IOUSBUserClient 4.1.5
com.apple.iokit.IOAHCIFamily 2.0.4
com.apple.iokit.IOUSBFamily 4.1.7
com.apple.driver.AppleEFIRuntime 1.4.0
com.apple.iokit.IOHIDFamily 1.6.5
com.apple.iokit.IOSMBusFamily 1.1
com.apple.security.TMSafetyNet 6
com.apple.kext.AppleMatch 1.0.0d1
com.apple.driver.DiskImages 289
com.apple.iokit.IOStorageFamily 1.6.2
com.apple.driver.AppleACPIPlatform 1.3.5
com.apple.iokit.IOPCIFamily 2.6
com.apple.iokit.IOACPIFamily 1.3.0
System Profile:
Model: MacBook7,1, BootROM MB71.0039.B09, 2 processors, Intel Core 2 Duo, 2.4 GHz, 2 GB, SMC 1.60f5
Graphics: NVIDIA GeForce 320M, NVIDIA GeForce 320M, PCI, 256 MB
Memory Module: global_name
AirPort: spairportwireless_card_type_airportextreme (0x14E4, 0x93), Broadcom BCM43xx 1.0 (5.10.131.36.1)
Bluetooth: Version 2.3.8f7, 2 service, 12 devices, 1 incoming serial ports
Network Service: AirPort, AirPort, en1
Serial ATA Device: Hitachi HTS545025B9SA02, 232.89 GB
Serial ATA Device: OPTIARC DVD RW AD-5970H
USB Device: Built-in iSight, 0x05ac (Apple Inc.), 0x8507, 0x24600000
USB Device: BRCM2070 Hub, 0x0a5c (Broadcom Corp.), 0x4500, 0x06600000
USB Device: Bluetooth USB Host Controller, 0x05ac (Apple Inc.), 0x8218, 0x06630000
USB Device: Apple Internal Keyboard / Trackpad, 0x05ac (Apple Inc.), 0x0236, 0x06300000

Problem with zen-nano-plus!! please help

i have the zen-nano-plus 52mb. and i try to update the firmware with latest version but i don't delete the music files in it.
i have started the instalation and the program asked me to delete the files on zen. (i didn't care keeping the files, so i continue the instalation)
when the program began to delete the files, after in few seconds i received an error messege from windowsoperating system reported error. the limit time on semaphore it's over.) now i have an 0.00.00 firmware version and i can't use the zen-nano because it's not starting. i have tried with the recovery tool but same situation it happend again. please help me if anybody knows something!!!!

Go to Creative.com and click the Support link. Look for the firmware driver for your Zen Nano and follow the directions. I had to do this to fix my Zen Nano Plus, because it had the exact same problem that yours had.
Good luck!

Problem with my ipods audio!! Please help!

When I play any audio on my ipod, it usually only comes through one earbud. Even if the headphones are brand new, and in perfect working order. My brother has a perfect working set of headphones, and when he uses them with his ipod, they work perfectly. Then when I plug them into my ipod, the sound only comes through 1 earbud (the right side). Then if I lightly pinch to the upper right of the click wheel (right under the screen), it will start to work. But I sometimes have to pinch in different places. What could be the problem???? Do I have to send it in to be repaired? Please help!!!

Try a 3rd party site and you can either have it fixed or buy the part and fix it yourself:
http://www.iresq.com
http://www.ipodmods.com
or Google for more.

Problem with XP/Vista Network...please help

Hi. I have been trying all day to configure my new network. I am using a wired wrt54g on a vista pc and using a wmp54g wireless adapter on my xp pc. I can connect to the internet from both pc's so the network connection is there. The problem is that the two pc's cannot see each other?! For about 10 minutes they were both on the map but when I tried to share files and a printer I lost it. I cannot get them to see each other now no matter what I try. Please help. I am new to all this.
nick

In Vista go to adaptor properties choose tcp/ip click advance then wins and enable netbios over tcp/ip. Vista should see the other network computers when check workgroup if you have set up network properly. Graphically if you want to see the xp computer on vista have to download lltd to all xp computers. this worked for me. Did a restore point in case before.

Problem with Micro Sim release Mechanism. Please help?

I am using Ipad2 and tried to change the Micro SIM using the Pins to release it. The Micro Sim holder is not coming out as usual and there seems to be an internal problem with the release mechanism. For now, I can't access my Micro Sim. Please help?

Tried as suggested but it does not work. Something seems wrong in the release mechanism. Thanks anyway. Is there any other option? If I bring it the Apple Service Center, will they be able to work it out?

Having a big problem with my 6 day old macbook, please help!

Similar Messages

Maybe you are looking for