Having a connectivity issue with bluetooth in car only when using siri

Does anyone know of a fix for connectivity issues when using siri to dial a number when using bluetooth in a car? If the number is inputted manually then the call goes through. When asking siri to make the call, it starts to go through but then quickly disconnects. I noticed the problem soon after downloading IOS 8.

Apple has no fix for this.  I have been in contact with Apple customer service, engineering, etc. for over 2 months now.  Very disappointing, as it worked fine prior to iOS 8.0.

Similar Messages

  • Is anyone else having charging connection issues with their generation 4 ipad?

    My generation 4 ipad is having charging connections.  When I plug it in to charge with the charger that came with it, the part that connects right to the actual ipad is not always connecting.  Sometime I have to wiggle it around or angle it until I hear the sound of connection and can see on the screen that it is actually charging.  Sometimes I will charge it and when I leave it is in charge mode but when I come back to check on it, it never charged at all. Is anyone else having this problem or know what might be wrong?  I would think a brand new ipad wouldn't have a charging problem right out of the box.

    Hi gruhland,
    Thanks for your reply.  It sounds like your device is actually in a restart loop, which is different from the process of a soft reset.  Specifically, what I wanted you to try is this:
    Resetting your device
    If your device stops responding, you can reset it by pressing and holding both the Sleep/Wake and Home buttons for at least ten seconds, until the Apple logo appears.
    If resetting does not break the restart loop, it sounds like a different direction may be warranted here. Due to the nature of your issue you may find more assistance by using another one of Apple's support resources:
    http://www.apple.com/support/contact/
    Take care,
    - Ari

  • I am having wireless connectivity issues with my time capsule

    Over the last 3 days my wireless devices have been having issues with connectivity.
    Network setup:
    Modem - Motorola SB5102 Cable Modem
    1 TB Time Capsule 802.11n (second generation)
    The devices are approximately 3 feet apart.
    Wired Device:
    Mac Pro (2008 build) running OSX 10.6.8, Airport Utility 5.6.1
    Wireless Devices:
    Playstation 3
    Macbook Air
    iPhone 5c
    iPhone 4
    I am having issues with internet connectivity. The wireless signal strength is fine as all devices can find the network. However when connected to the network accessing the internet on the Macbook Air, or either iPhone is slow and streaming services such as Netflix cannot connect. I have intermitant connectivity to the Playstation Network on the PS3.
    I have wired both the Macbook Air and PS3 directly to the Time Capsule and have no issues, internet is accessible and streaming services are fine.
    I have power cycled all the devices (Time Capsule, macbook, iphones, PS3, modem) to no result.
    I am looking for any other suggestions that may help me with my wireless connectivity issue.

    A Gen2 TC is probably on its last gasp.. and it is well overdue for replacement.
    If you want to get more life out of it you normally need to repair or replace the internal power supply.. This is not done by apple or any of their repair centres.
    Just do ebay search and you will find sellers with replacement supplies.
    Otherwise to test, do a full factory reset..
    I would also downgrade the firmware.. 7.5.2 will work just as well for you and has less bugs than 7.6.x firmware.
    To downgrade hold down the option key when you select firmware version.
    The Factory Reset universal
    Unplug your TC/AE. Hold in reset. and power the TC/AE back on..  all without releasing reset and keep holding in for about 10sec. The time is not important.. it is the front LED rapid flashing that indicates you are in factory mode.
    Release reset.
    If it doesn’t flash rapidly you have released reset at some point and try again.
    Be Gentle! Feel the switch click on. It has a positive feel..  add no more pressure after that.
    TC/AE will reboot after a couple of minutes with default factory settings and will wipe out previous configurations.
    No files are deleted on the hard disk.. No reset of the TC deletes files.. to do that you use erase from the airport utility.

  • Having a connection issue with the WRT54GS Wireless Router

    We just recently got Broadband internet. We had issues with it at first, because the Ethernet cable included wasn't working properly, and instead, the guy got us connected via USB cable. Now, I just bought this Router yesterday, and made the mistake of unplugging the USB and plugging in the extra cable. I did everything as instructed in the Easylink Advisor program. My connection was messed up, and I could not connect at all. After calling Tech support, they reset our modem and everything (cable modem and internet-wise) is as good as new. I went out and bought a new Ethernet cable, so now I have 2 perfectly new cables, and left the USB cable plugged in, so I don't throw it off as I did yesterday. I still can't get the Port 1 light to come on. the WLAN light is on, as well as the Internet light, but no Port lights will turn on. Anyone have any ideas? Thanks in advance! -Chris-

    Are you getting online via ethernet with the modem now? Make sure your local area network is enabled. Go to control panel then network connections.
    Message Edited by Pio04 on 07-11-2007 11:47 AM

  • Has anyone encountered issues with Data Execution Protection (DEP) when using windows with Muse?

    A week without my Muse. Please HELP. I am trying to be Patient.
    Each time I try to open my muse it is freezing and shutting down right away. I open the file and it just freezes.  I get a window that pops up explaining DEP (I have tried to shut it off and it doesn't work). Has anyone else ever had this happen? I really want to get my Muse working again, its going on a week without. I have windows Vista, 32 bit. Since I did the recent updates its not working anymore. Can I roll back to an older version? Thank you.

    So I found a fix to this myself. I found that others were having the same issue in Photoshop CS6 too. What I did was go to open the app, right click on the app icon, go to properties>compatibility>click the box for Compatibility Mode that says "Run this program in compatibility mode for:: select your operating system (Mine was windows xp sp2). I also selected "Run as Administrator". So far it is working, I am upset that this was such a simple go around and I have been without my muse for over a month now.

  • Having recent connectivity issues with AirPlay, it won't connect with Apple devices when promptedi have had no problems with AirPlay from my tablet until recently. I bring up the AirPlay button on my tablet, ipad 3, and I see the AirPlay button. I pl

    i recently have been problem with my AppleTV. I select the AirPlay button on my ipad3 and select AppleTV below my iPad selection. The tablet thinks for a little bit, about 5 seconds, and then gives up, deselecting the AppleTV button and refreshing automatically to display on my tablet. My spouse has the same issue at the same time with her ipad air. All software is up to date and re verified wifi. The AppleTV can still stream from its internal apps. Seems like the only problem is AirPlay.
    any ideas to fix this problem?

    Welcome to the Apple Community.
    Try the following steps, check whether things are working after each step where appropriate, before trying the next.
    Check AirPlay is turned on on the Apple TV (turn it off and on if it already is)
    Check that both devices are on the same network (Settings > Wifi, on the mobile device and Settings > General > Network, on the Apple TV).
    Restart the Apple TV (Settings > General > Restart).
    Restart the Apple TV by removing ALL the cables for 30 seconds.
    Restart your router. (Also try removing it’s power cord for at least 30 seconds)
    Restart your mobile device.
    If you are still having problems, the following article(s) may help you.
    Troubleshooting AirPlay
    Troubleshooting Wi-Fi networks and connections
    Recommended Wi-Fi settings
    Wifi Diagnostic Software (for Mac users)
    You may also find some help on this page, where I’ve collected some of the more unusual solutions to network issues.
    When making adjustments to your network for better optimisation, you may find some of the points mentioned on this page helpful.

  • Is anyone having WiFi connectivity issues with 6.02

    Is anyone else having problems with connectivity to WiFi hotspots since upgrading to 6.02. I have an iPhone 5, and ever since I upgraded, I can't connect to public hotspots without first restarting the phone. An example would be AT&T WiFi at Starbucks. All I get is an endlessly spinning gear icon unitl I restart my phone. I'm currently traveling and staying in a Sheraton with free public WiFi in the lobby, and once again, I can't get the logon page to display without restarting the phone. While the problem seems most prevelant with sites that require the opening of a web page to accept terms, it happened to me today at someones house where the only way I could successfully connect to their wireless was to restart. Until I did, the gear icon just kept spinning. Once I restarted I was able to connect successfully. This is becoming a major PITA!
    I sure hope that engineering gets this corrected in 6.1. I expect more of Apple than to say they've upgraded iOS to fix WiFi issues, only to make them worse.

    I have this same issue.  I'm hoping there is another update in the works.  I finally got the issue resolved when my new Iphone 6+ continued to crash so now I'm dealing with internet issues.  Phone resets are not helping!

  • I have constant connectivity issues with Safari but not if I use Chrome.  Why is this?

    My wifi is connected yet when I launch Safari, I constantly receive error messages about connectivity yet if I launch Chrome instead, I have no problems.  Do I just not use Safari or is there a way to fix this?  Thanks!

    Go step by step and test.
    1. Power off the router. Unplug it from the wall. Wait a while.
        Plug it back to the wall. Power the router on. Wait until all the lights are lit properly. It will take a while.
        Restart the computer.
        Start up in Safe Mode.
        http://support.apple.com/kb/PH14204
    2. Deselect Proxies if selected.
       System Preference > Network > Advanced  > Proxies Tab
       Under "Select Protocol", uncheck any box if selected.
       Click "OK" then  "Apply”.
    3. Delete Caches.db
        Close all windows and quit all applications.
        Hold "option" key down and click "Go" menu in the Finder menu bar.
        Select "Library" from the dropdown.
        Library > Caches > com.apple.Safari > Caches.db
        Right click the Caches.db file and select "Move To Trash.
        Close windows and relaunch Safari.
    4. Empty Caches
        Safari > Preference > Advanced
        Checkmark the box for "Show Develop menu in menu bar".
        Develop menu will appear in the Safari menu bar.
        Click Develop and select "Empty Caches" from the dropdown.

  • Issue with the sender file interfaces when using UTF-8 files

    Hello experts,
         We are having number of File to SAP interface scenarios in our business process. In the past, we are having the files coming to us in ASCII text format. Recently, because of the business process change(to handle multiple languages like Chinese), we are getting now the same files in UTF-8 format. So, we have changed the attribute File Type in the sender communication channel from Binary to Text and used encoding format as UTF-8.
    Now, when we see the processed files in PI, we are missing the Header record in the message. For example, we have the PO interface in the following format:
    Identifier     Information
    H     PO header information
    I     PO Item information
    I     PO Item information
    Once the file adapter picks this format kind of file and when we see the XML message in PI, it is just having only two Items information. The header part is not coming to PI at all and the message is trying to get processed inside SAP and therefore interface is failing.
    Additional observations made:
    u2022     We have checked the Document Offset field value too; it is initial for the interface.
    u2022     We added an empty line in the UTF-8 text file, it worked fine. But, this is not an ideal solution for us, because the system which generates these files, canu2019t handle it.
       Does any one has observed this kind of problem before? If so, can you please help me ...
    Thanks,
    Adithya K

    Thanks for all the information. Currently i've tried to use both modules (TextCodepageConversionBean and XMLAnonymizerBean) in my Sender File Adapter, but for now without any result...
    To describe the situation: i am using flatfiles which i am fetched from the file system (NFS) by the Sender File Adapter. To translate the characters to the XML strucutre, the File Content Conversion protocol is been used.
    The content conversion defines the structure base on the first two characters on each row in the flat file. This worked fine till one of our suppliers is delivering BOM characters like "EF BB BF" in the beginning of the file.The content conversion is not able to recognize my header characters in this situation, which will normally start with "01".
    Any suggestions?

  • Strange Issues with Apple TV & Apple iPhone when using iPhoto?

    Im not sure if this is the right forum but since iPhoto seems to be the only missing link to my problem - I hope someone can help me out.
    First let me explain my situation in great detail so I dont steer anyone in the wrong direction.
    Of course everything works perfect if you only use the internal Hard Drive in my iMac. In other words, using iPhoto to create albums and slideshows worked flawless. Apple TV & Apple iPhone synced what I needed perfectly.
    I then decided to get a 500G External Hard Drive to hold all my pictures and music. Everything changed!!
    I followed the instructions on Apple's Support Web Documents. It appears that everything has moved over nice and smooth. I say that because when I open the Macintosh HD (OEM Internal) there are no movies or photos to be found on that drive any more.
    It also appears that iPhoto has no issues itself. In other words, it finds all my photos (on the external 500G drive) displays them perfectly. I can create albums and slide shows as well.
    The problem comes from Apple TV and Apple iPhone NOT seeing any more photos or slide shows. I figured that I must have to "point" Apple TV & iPhone (which in reality is iTunes) to a "new" location since its all been moved from the OEM Internal HD.
    Now in iTunes, in the "photos" tab, I choose a new folder (instead of iPhoto) and browse the the External 500G HD, select the "iPhoto Library" folder and then iTunes now can see all 2,281 photos!!
    Problem is that I dont want to sync ALL my photos just some of the Albums I created. iTunes doesn't see ANY albums or slideshows.
    Since I created those albums before I moved the library - I figured I might have to delete all the albums/slide shows and make new ones while the data is all on the External 500G HD.
    No such luck. Its like any albums I now create work fine INSIDE iPhoto but Apple TV and iPhone just see ALL my photos and NOT any albums I create inside iPhoto.
    Is this a known issue or am I doing something wrong?
    The file structure in the iPhoto Library folder is very confusing. I have a total of 2,281 photos. 1,028 of them are in a folder called "Data" & the other 1,028 photos are in a folder called "Original". Both folders have a bunch of years inside them with my photos scattered all over the place.
    I dont see my "Albums" anywhere inside these folders.
    Now if I create my own folder inside the "iPhoto Library" folder - iTunes and iPhone will pick up on that folder I created!!
    In essence, I have to open up iPhoto - then drag photos to my "new folder" I created in order for iTunes to see them.
    Im I on the right track here? I didnt have to do any of this when I just used my Internal OEM HD.
    Any suggestions or comments?
    Thanks for your help.
    John

    Do you have ignore ownership selected for the external drive like this.
    Do you Twango?
    TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
    I've written an Automator workflow application (requires Tiger), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.

  • Issues with iOS 7 - not responding when using ZOOM function

    iOS 7 is very unstable for ipad 2. Everytime I use zoom function, it is not responding and I have to restart it.
    Is it possible for me to change the operating system back to iOS 6 now?
    Or is it possible for apple teams to consider this issue and fix it during next upgrading?
    By the way, iPhone 4 totally cannot run iOS 7. It is very laggy.
    Can anyone answer my question? Thank you!

    Zoom work OK for me on iOS 7.
    Have you tried restarting or resetting your iDevice?
    Restart: Press On/Off button until the Slide to Power Off slider appears, select Slide to Power Off and, after It shuts down, press the On/Off button until the Apple logo appears.
    Reset: Press the Home and On/Off buttons at the same time and hold them until the Apple logo appears (about 10 seconds).
    Downgrading to iOS 7 is not possible.

  • HELP! Lightroom Crashes Only with Adjustment Brush and only when using HDMI output!

    This is very frustrating. I use my Acer N56V laptop to teach Lightroom workshops. I use a 32 inch television as a display. When I have my laptop attached with an HDMI cable and try to use Lightroom's adjustment brush, it crashes. Either the screen and computer just shuts down or I get the Blue Screen of Death. I can do anything else! I can edit in Photoshop, do anything else in Lightroom or even Silver EFX Pro. I can even click on the adjustment brush. But the minute the brush hits the photo (and not before), the computer crashes. If I don't have it attached to the HDMI or if I use a Serial cable, no issues. It's only the adjustment brush and only the HDMI output.
    I called Adobe and they said it was because my onboard video card was primary and not the Nvidia. I called Acer and they said it's auto detect. I also tried making the Nvidia card primary and it still happened. Any ideas???

    You have switched the overlay mask to always show. Fortunately, it's easy fixed i.e. tap the O key. Shift+O will cycle the overlay through various colours
    Other Adjustment Brush and Graduate Filter shortcuts and modifiers are listed them below:
    Open Adjustment Brush - K
    Open Gradient Tool - M
    Show/hide Pin - H
    Always Show - Shift + Cmd/Ctrl+H
    Show Selected/Never Show - Shift+H
    To increase Amount - Right Arrow
    To decrease Amount - Left Arrow
    To increase/decrease brush size -  ] / [
    To increase/decrease feather - Shift+] / Shift+[
    Set Flow Amount - Number Keys
    To commit  and/or start new a brush stroke or gradient - Enter / Return
    To delete the selected pin - Delete
    Holding down - Alt/Option key activates erase mode
    Toggle Auto Mask On/Off - A
    Pressing O toggles on/off the overlay
    Shift+O cylces through alternative colours for overlay
    To constrain gradient to vertical/horizontal  - hold down Shift plus drag
    To invert the gradient - '
    To scale from center - Alt/Option plus drag

  • Can't connect to wifi ipod touch 4 only when using WPA2

    I recentrly upgraded my router to a MI424WR Rev I. Since then an iPod Touch 4 can't connect to the wifi. While this is occurring I can connect to the same wifi 2 ASUS laptops, 1 Samsung laptop, 1 Dell laptop, 1 iPad, 1 iPhone5, 1 iPhone 5c, 1 ipod touch 3, and 1 Android tablet. The only thing that can't connect is the ipod touch 4. The device can connect to wifi at school, where no passord is needed, and other places like that. It jsut keeps showing the erros "incorrect password" and can't connect at home. I've tried used a fixed channel -1,6,11- as opposed to automated but with the same results.
    Any suggestions or ideas would be greatly appreciated.
    Thanks

    Note that there are different types of resets on Apple devices.  Not all resets delete WiFi info.  "Forget Network" will cause an iThing to forget all passwords and network settings.  The next time you connect, it will start over.  If you haven't tried "Forget Network," give it a whirl.
    Good Luck.
    If a forum member gives an answer you like, give them the Kudos they deserve. If a member gives you the answer to your question, mark the answer as Accepted Solution so others can see the solution to the problem.

  • Access Denied Web Application with Claims authentication NTLM only when using secondary URL

    I have a SharePoint 2010 server farm with 2 web front ends, an application server and a database server.  Both front ends are internal to
    our network and are not behind a load balancer.
    NOTE THAT I HAD TO SUBSTITUTE hzzp with hzzp so that I had no links in the body of this post since I am not verified
    I setup a new web application called "SharePoint 41171" with:
    Public URL:
    hzzp://testserver1:41171
    Claims authentication
    NTLM only: no forms auth
    No SSL
    New web site "SharePoint 41171"
    New app pool
    New content database
    I create a top level site collection and name mydomain\myusername as the primary site collection admin
    I am able to access this site as expected at
    hzzp://testserver1:41171 with the aforementioned site collection owner id: mydomain\myusername
    I add an alternate access mapping for a secondary URL for this web application in the Intranet zone:
    hzzp://iwatest.mydomain.com
    So my AAMs for the site read as:
    hzzp://testserver1:41171    
    Default     hzzp://testserver1:41171
    hzzp://iwatest.mydomain.com    
    Intranet     hzzp://iwatest.mydomain.com
    When I attempt to log on to
    hzzp://iwatest.mydomain.com with the same user name and password, I get "access denied".
    I can access this site using
    hzzp://iwatest.mydomain.com if I log in as the farm account.  This is the only account that seems to work.
    Side Note: If I create a separate web application without claims - just NTLM and create the same AAMs, I can login fine with the same secondary
    URL and the same user name
    IP address properly maps to this machine.
    I reviewed the ULS logs and find the following:
    10/30/2012 16:20:23.45              w3wp.exe (0x0E78)                      
                    0x1724       SharePoint Foundation              Monitoring                   
                    nasq                        Medium    Entering
    monitored scope (Request (GET:hzzp://iwatest.mydomain.com:80/_layouts/AccessDenied.aspx?Source=hzzp%3A%2F%2Fiwatest%2Emydomain%2Ecom))                
    10/30/2012 16:20:23.45              w3wp.exe (0x0E78)                      
                    0x1724       SharePoint Foundation              Logging Correlation Data     
          xmnv                        Medium    Name=Request (GET:hzzp://iwatest. mydomain.com:80/_layouts/AccessDenied.aspx?Source=hzzp%3A%2F%2Fiwatest%2Emydomain%2Ecom)      
    8f313b5e-8476-4dd4-9abe-0cb6dbe024b6
    10/30/2012 16:20:23.45              w3wp.exe (0x0E78)                      
                    0x1724       SharePoint Foundation              Logging Correlation Data     
          xmnv                        Medium    Site=/          8f313b5e-8476-4dd4-9abe-0cb6dbe024b6
    10/30/2012 16:20:23.45              w3wp.exe (0x0E78)                      
                    0x1724       SharePoint Foundation              General                      
                       8e2s                        Medium 
      Unknown SPRequest error occurred. More information: 0x80070005       8f313b5e-8476-4dd4-9abe-0cb6dbe024b6
    10/30/2012 16:20:23.45              w3wp.exe (0x0E78)                      
                    0x1724       SharePoint Foundation              Monitoring                   
                    b4ly                        Medium    Leaving
    Monitored Scope (Request (GET:hzzp://iwatest.mydomain.com:80/_layouts/AccessDenied.aspx?Source=hzzp%3A%2F%2Fiwatest%2Emydomain%2Ecom)). Execution Time=8.66003919492561   8f313b5e-8476-4dd4-9abe-0cb6dbe024b6
    Basically it tells me that access is denied.  I didnt see anything that stood out here.
    I found this article:
    hzzp://social.technet.microsoft.com/Forums/en-US/sharepointadminprevious/thread/ded9188b-ee03-4ef0-bb50-3ad138110e0c, which pointed me in the direction of ensuring that the portal
    super user and portal reader accounts were properly added to my web application.  I followed the every popular article on doing this:
    hzzp://technet.microsoft.com/en-us/library/ff758656.aspx, but still no luck.  As per the thread, I added the 2 domain accounts to the user policy with appropriate privilege
    and then set them as the super user and super reader accounts via powershell, and yes I did prefix those names with "i:0#.w|mydomain\".  To be exta sure, I repeated this for all web applications on this server with slightly different powershell steps
    depending on wether or not claims was enabled on the web application.
    The Claims to Windows Token Service is running.
    I saw some mention of ensuring that the secure token service is running with a proper application pool account, but we are not running that service
    and I cant imagine what that would have to do with my situation.
    I have deleted and readded the web application and repeated these steps to no better effect.
    I gave the mydomain\myusername full control for the web application through the user policy, ensured that it was indeed the primary site collection
    owner and added it to the default site owners group.  None of this helped.
    I changed the application pool account to the farm account.  No change in behavior.
    Rebooted IIS and the machines many times along the way.
    Further, when I attempt to sign in as a different user after being denied, I get "an unexpected error has occured message.  I found the following
    in ULS:
    10/30/2012 11:19:03.71 w3wp.exe (0x182C)                      
    0x1210  SharePoint Foundation                 Logging Correlation Data                     
    xmnv     Medium               Name=Request (GET:hzzp://iwatest.mydomain.com:80/_layouts/accessdenied.aspx?loginasanotheruser=true&Source=hzzp%3A%2F%2Fiwatest%2Emydomain%2Ecom)
    cc409ec2-4889-42fa-aa7d-9cc4535e4f0e
    10/30/2012 11:19:03.71 w3wp.exe (0x182C)                      
    0x1210  SharePoint Foundation                 Logging Correlation Data                     
    xmnv     Medium               Site=/    cc409ec2-4889-42fa-aa7d-9cc4535e4f0e
    10/30/2012 11:19:03.72 w3wp.exe (0x182C)                      
    0x1210  SharePoint Foundation                 General                      
             8e2s                Medium               Unknown SPRequest error occurred.
    More information: 0x80070005      cc409ec2-4889-42fa-aa7d-9cc4535e4f0e
    10/30/2012 11:19:03.72 w3wp.exe (0x182C)                      
    0x1210  SharePoint Foundation                 Runtime                      
            tkau                Unexpected       System.NullReferenceException: Object reference not set to an instance
    of an object.    at Microsoft.SharePoint.ApplicationPages.AccessDeniedPage.LogInAsAnotherUser()     at Microsoft.SharePoint.ApplicationPages.AccessDeniedPage.OnLoad(EventArgs e)     at System.Web.UI.Control.LoadRecursive()    
    at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)            cc409ec2-4889-42fa-aa7d-9cc4535e4f0e
    10/30/2012 11:19:03.74 w3wp.exe (0x182C)                      
    0x1210  SharePoint Foundation                 Monitoring                        
    b4ly                Medium               Leaving Monitored Scope (Request (GET:hzzp://iwatest.mydomain.com:80/_layouts/accessdenied.aspx?loginasanotheruser=true&Source=hzzp%3A%2F%2Fiwatest%2Emydomain%2Ecom)).
    Execution Time=22.5439266722447           cc409ec2-4889-42fa-aa7d-9cc4535e4f0e
    By the way, this occurs for the farm account also after a successful login and an attempt to sign in as a different user.
    Any help would be greatly appreciated

    Thanks spadminspadmin:
    I have, though I am not sure that what I've added there is correct:
    The URL that I am trying to use to access the web application's IIS site is hxxp://iwatest.mydomain.com.  I added a binding to the IIS site as follows:
    Type    Host name                      port        IP address
    http     iwatest.mydomain.com     41171     *
    Is that correct?

  • Anyone else having repeated wifi connectivity issues with the OSX version 10.8.5?

    I just updated the software on my iMac to OS X version 10.8.5. Now I am having repeated connectivity issues with the wifi in my house. This is the only device that is having these issues. My phone, ipad and tv are not having any problems at all.
    It happened immediately following the update. I was sending emails and browsing before the update without a problem.
    from apple:

    I had a message like that last week - only it asked what browser I would be using - I just quit safari - purges caches etc - and at that time noticed I was getting RSS feeds through PUBSUB - tracking them down to the top sites view I never use - I deleted all of the top sites (most of which I don't go into so it must have been a preset) that included MSN and Google - I don't use google so that was pointless.  (deleting a top site means you are blocking it from that page)    Have not had the message since so it must have had something to do with top sites activity.
    Just a note:  Did see somewhere probably BBC tech - that Google was going to stop supporting older web browsers.

Maybe you are looking for

  • JavaFX Update Line Chart on Tab pane

    Hi all, I am wondering can anybody help with this problem. I have an application that can create a new tab when the LineChart FXML view is called by way of onMouseClicked event from a bar graph (using scenebuilder). However, I need this Line chart to

  • Why can't my hdmi cable work with my computer

    why can't my hdmi cable work with my computer and we i put the cable in my computer. My computer just goes black for one second and then it goes but to my computer display.

  • Cursor postion on next line after scanning

    Hi All, My requirement is to automatically set the cursor position on the next line in SALES tab of standard sales order. once the material barcode is scanned and the material number, quantity and price get populated , the cursor position should be s

  • How to write DML operation in a function

    Hi Its very urgent for me. I am writing DML operation directly in a function and is being called from select statement, it is getting error as "DML Operations cannot be performed inside a query". How to write a DML operation inside a function. My obj

  • How To change UME Data source from Abap to Java.

    Hi Experts, Can any one give me Detailed Steps of how to Migrate from UME Data Source from Abap to Java, as the Ume Data Source is initally configured for Abap. Regards, Siva