Having a hard time changing the duration times of frames

Hello everyone!
Need your help with iMovie 08.
I'm almost finished with a project. Videos are there mixed with some of my photos with a music background.
The problem is that I'm having problems changing the time duration per frame. For example, I put 3.0 seconds in Photo A, it changes back to 2.7 seconds. This is usually the case for pictures. I made sure that the change is for that picture only but it just won't change.
Your help is greatly appreciated.

That sounds about right if you have added a .5 second transition between your photos.
Think of it this way...
3 second photo + 3 second photo = 6 seconds
2.7 second photo + .5 second transition + 2.7 second photo = about 6 seconds

Similar Messages

How do i change the duration time on my music

i want to make the duration time on one of my songs shorter but when i
1. right click on the song
2. click get info
3. click options
4. the box turns grey and doesn't let me click on anything
i can see the little thing that says start and stop time but it doesn't let me click it. what do i do?

Repair iTunes Security Permissions
Right-click on your main iTunes folder and click Properties, then go to the Security tab and click Advanced. Use the Change Permissions... button grant to your account (or the Users group) and SYSTEM full control of this folder, subfolders and files, then tick the option to Replace permissions entries... which will repair permissions throughout the library. When complete switch to the General tab, click in the Read-only check box to clear it, then click Apply.
If you don't have the option to change the permissions then use the Owner tab and Edit... button to take ownership from an account with administrator privileges. Tick the option to Replace owner on subcontainers and objects.
Repeat with the media folder if it isn't stored inside the main iTunes folder.
tt2

Changing Critical Duration time unit

Hi,
The Warehouse monitor in LL01 executes well with job run daily.
Now the user's request is to change the critical duration time from Day to Hrs .
Will there be any impact on changing the duration time?
Regards,
Vengat

Nope. There are no issues in doing that.

I am having a difficult time getting the duration of multiple selected clips. The duration display only will display the time for one clip. Yes, I know I can add them up myself, but why? :-)

I am having a difficult time getting the duration of multiple selected clips. The duration display will only display the time for one clip not multiple clips. Yes, I know I can add them up myself, but why? :-)
I am using imovie 10.0.6

For reasons that you would have to ask Apple for they decided not to allow the precise position of the playhead to be shown in iMovie 10 (unlike in FCP 10.1.x).
Geoff

IPad 3: How can I change the display time in a slideshow?

iPhoto for iPad is a nice App, but I did not find a possibility to change the time a photo is displayed in a slideshow. It seems to be always about 4 seconds. Is there a hidden possibility? Thanks for hints.

It seems to be always about 4 seconds. Is there a hidden possibility? Thanks for hints.
Not with the iPhoto.app slideshows. You could however use the Photos.app to present your iPhoto albums as a slideshow. For the Photos.app you can change the duration for the presentation of slides in the Settings.app.
Settings >Photo & Camera(s) > Slideshow > Play each slide for ....
Regards
Léonie

Is there a way to change the download time (hour-minutes) for podcasts?, Is there a way to change the download time (hour-minutes) for podcasts?

Is there a way to change the specific time when subscriptions to podcasts are downloaded? I seem to be locked in to 6:29 pm.
Thanks.

i have the same problem. i bought a new external hard drive and i am trying to move my entire library onto it. i copied all of my itunes library onto it but when i tried to delete a song off of my initial C: drive to test it, i had to go in an individually change where the songs location was. i already tried changing where the itunes music folder was located however the library still says its located on the C: drive.

IMac can't running any two fire wire hard disks at the same time . which

iMac can’t running any two fire wire hard disks at the same time . which two hard disks have extra power from power socket . If i just insert one of them .No problem . If connect two Hds at the same time. Leopard cant find it and the Hds seem no problem. the machine must be restarted and then use one . No problem . I have formated the HD many times .even if which format is Fat 32 or Mac issue persists .Boot from installation CD used the disk utility . Issue stills . If i used one fire wire HD that get power from power socket and used one fire wire device . Leopard was no problem during this time . Whether is this design problem or my machine hardware problem?My Mac has been changed the logic board by Apple service . Do you have similar case in here????
Message was edited by: KennyG1983

Hi KennyG1983-
How are you connecting these drives?
This may help: What to do if your computer won't recognize a FireWire or USB device
Luck-
-DaddyPaycheck

I am trying to change the display time in Captivate 5...

When I try to shorten the length of a slide either in properties or by clicking the end and dragging it, like in Captivate 4, it keeps going back to the original time. Normally I record a demonstration and when I am done adding the effects and the voice I have to shorten or lengthen a slide, but I am unable to do this in CP5. Please help.

Hello,
If the slide is longer than 3 sec you can change the 'Display time' in the Properties panel, General section too. But here you cannot get below 3 sec. Dragging in the timeline allows me to go below 3 sec, but you have first to shorten the timeline of the objects before you can change the duration of the slide. To be sure I just tried again and was able to get to a minimum time of 0.1 sec with that workflow. In the screenshot it is 0.3 sec. If you have FMR, video or audio however the duration of that object will be responsable for the duration of the slide.
Hope it works for you too, cannot explain why it is not possible with the Properties panel, which will show correctly the duration after you changed it with the Timeline.
Lilybiri

When inputing the time, my calendar always changes the end time to a "one-hour" segment, how do I change this?

Trying to set up appointments on my calendar. When I input the time, the calendar defaults to a "one-hour" segment. How do I fix this?

To change the default event time go into Tools-Options-Calendar-General and set the duration time.
No menu bar with Tools? Press the alt key.
To be able to change the time when setting the individual event, click on the link icon to the right of the time fields. If the points of the links are touching the duration time is locked to the default. If the points are separated you can set any duration.

How to change the defrag times

Can you change the defragmentation times because i dont want to leave my laptop on all night?

MartyFromTauranga wrote:
Can you change the defragmentation times because i dont want to leave my laptop on all night?
There is no need to leave the MBook on over night. There are a couple of clean-up-scripts starting if the system is idle (cpu usage is under a specific value) and if system starts up / shoot down.
If you (like I do) let the system run for weeks, by only putting the Mac to sleep state, it could be necesary to let the Mac run to idle state (first close all unneeded applications) every two weeks or so for a while.
The HFS+ filesystem needs no "defrag" as HFS+ optimizes the filestructure "on the fly" when deleting or adding files to the drive.
HFS+ uses a number of optimizations to the allocation algorithms in an attempt to defragment files while they are being accessed without a separate defragmenter.
If (very unlikely in normal operations) the filesystem does become fragmented, the only way to defragment it is to use a 3rd Party tool; or to wipe the hard drive completely and install the system from scratch.
Cheers - Lupunus

Mac Pro can't running two fire wire hard disks at the same time .

Mac Pro can’t running any two fire wire hard disks at the same time . which two hard disks have extra power from power socket . If i just insert one of them .No problem . If connect two Hds at the same time. Leopard cant find it and the Hds seem no problem. the machine must be restarted and then use one . No problem . I have formated the HD many times .even if which format is Fat 32 or Mac issue persists .Boot from installation CD used the disk utility . Issue stills . If i used one fire wire HD that get power from power socket and used one fire wire device . Leopard was no problem during this time . Whether is this design problem or my machine hardware problem?My Mac has been changed the logic board by Apple service . Do you have similar case in here????

I connect both hard disks that get power from power supply normally. Also have ever changed the format as GUID. Which always use the power cord . I felt confusion why the issue just happened connect both hard disks with extra power at the same time. If i used one hard disk connect to firewire port . Another firewire port connect other firewire device . No problem at all.

Changing the System Time

I am using a SunBlade 1000 and C++ with Workshop 6.1. I would like to change the system time via a program written in C++ without having to log in as super-user. Is that possible ? I was thinking about using the settimeofday function, but according to the man information I only can use it as super-user.

You are correct. Only root can set the system time. You should
probably consult your local system admin or discuss the implications
of trying to do this in the Solaris forum. There are possible security
holes opened up by trying to do root's job programatically.
In general, a C program can use the system() call to run a command
that would be typed in at the shell. A program can also have the
Set UID bit and run as root, but you should be well aware of the
risks associated with that before you try to use it.

Can I export my sidecar files to two or more hard drives at the same time from one computer?

Can I export my sidecar files to two or more hard drives at the same time from one computer? How do I do this, if it is possible?

Each image is imported into the LR Catalog from just one stated location on disk. And that is where the sidecar gets written.
But if you want, outside of LR, you can have a file sync utility replicate all physical changes within those folders on disk, into other corresponding locations on other drives - which hold a copy of all the same images, and a copy of the sidecars too. This might happen continuously, periodically or on demand depending on the particular tool you use... for example, the Dropbox desktop app.
If you also want to have your LR Catalog replicated, I think this can only be done when LR is not running and using that.

How to change the default time?

when you finish the action of dialing ,the CCM system recognize your finish after 10s .How to change the default time in Service Parameters ,which is the detail Parameters ?

Please see the following link for information on configuring the interdigit timeout.
http://www.cisco.com/en/US/products/sw/voicesw/ps556/products_tech_note09186a00800dab26.shtml
Hope this helps. If so, please rate the post.
Brandon

Apple Mail, is there a way to change the default time-out?

This has been puzzling me for some time and I have not found a solution. The problem which I also posted in the Mail forum (though I think that if there is a positive answer it will come through here) is as follows:
I have an email account with on my company's mail server which is actually a Novell Netware server with a POP3 service. When using mail to send mail, I have no problems. When using mail to recieve mail, well, sometimes it gets the mail, and sometimes it does not. Usually, I can recieve mail for two or three weeks then it just stops working. No changes to my system, no updates or anything, I recieve email at one point in the day and then 15 minutes later - nothing. In the Activity Monitor, I see "Connecting to ..." then "Sending Password" then "Checking for Messages", then (after a while) it beeps as if it did not find any messages to download (no error!).
Some weeks later, after suffering with webmail, suddenly, it works again. This usually coincides with maintenance on the server, but not always. It also seems to correspond with a general improvement of the server performance. But eventually, the cycle starts over again with mail suddenly not able to find any new messages for that account.
I use dial-up at home, ethernet LAN at work, and DSL at our satellite offices. When it works on one it works on all. Also note that my other email accounts (not in any way connected to my company) work as they should at all times and in each setting.
Is it possible that mail simply times out before the messages are discovered. The Novell server used for mail is by no means known for its performance. If so, is there anyway to change the default timeout in mail for "Checking for Messages"?
Things I have tried:
I have dumped the "MessageUidsAlreadyDownloaded" and "MessageUidsAlreadyDownloaded2" files to no avail.
I have changed computers (I recently upgraded from a ti400), reinstalled the OS, upgraded from 10.2.8 to 10.3.x to 10.4.3, and removed and recreated the mail account (multiple times), all to no avail.
Based on the above observations, I feel that it may be that "Mail's" "Get-mail" function is timing out before new messages are discovered on a very slow server. Is there any way to change the default time-out to evaluate this hypothesis?
Any help would be appreciated.
Kraig

I already thought of that one. I deleted my account from there. But it didn't default to the other one. It just told me I needed to add an account. Thanks tho

Having a hard time changing the duration times of frames

Similar Messages

Maybe you are looking for