Having a problem in conecting with airport extreme 802.11n wi-fi on ipad2, having a problem in conecting with airport extreme 802.11n wi-fi on ipad2

when i was trying to conect with the airport extreme 802.11n wi-fi on my ipad 2, having problem in my ipad saying that your airport base station does not have a valid IP address. make sure your airport base station is connected to your broadband modem or local network....n also another message is this airport base station doisn't have any DNS server addresses and might have trouble connecting to the internet... bt in laptop can use this internet without any having problem.... so freinds any idia to solve this problem.??

Hi Achan Siro,
Welcome to the Support Communities!
The article below may be able to help you with this issue.
Click on the link to see more details and screenshots.
Resetting an AirPort Base Station or AirPort Time Capsule FAQ
http://support.apple.com/kb/HT3728
Cheers,
- Judy

Similar Messages

I just bought an AirPort Extreme system over this weekend and I am having problem with setting it up. I plugged the cable as explained in the manual but there is no way I can get a steady green light. I all see is flashing amber light. Can anyone help me,

I just bought an AirPort Extreme system over this weekend and I am having problem with setting it up. I plugged the cable as explained in the manual but there is no way I can get a steady green light. I all see is flashing amber light. Can anyone help me,

Think you need to provide some more details about what you are connecting

Using an X-Modem M3 with an Airport Extreme and having iChat video problems

Hi,
I have been posting on the iChat section over the last week or so regarding a big problem I have with iChat4 Video. I have been getting some great help over there, but it has been mentioned to me that I may be able to pick up some help in this Topic regarding any more detailed known issues on the X-modem M3 or Airport Extreme.
I am still very new to this Discussion board use, so I hope it's ok to jump in like this and post a link to my ongoing discussion in iChat. See below.....
http://discussions.apple.com/thread.jspa?threadID=1323485&tstart=0
I didn't want to copy all of my message again into here as I thought it best that if you can help you could use the link.
If anyone can help throw some light on this, then many thanks.

The X-Modem in the default modem mode has no influence over the data being transferred. It is a modem not a router so it does not block any communication ports. Your iChat problems must be either on the Airport or the computer.
Seeing as how iChat works fine when the modem is connected to the computer via Ethernet it shows that the modem is working fine and that your ISP doesn't seem to be doing any blocking that would prevent iChat from working.
It really looks like the Airport Extreme is the culprit, perhaps the firewall on the computer is not properly allowing iChat to tell the Airport what ports it should open. Have you tried switching the firewall off completely at both ends ? Seeing as how the computers are behind Airports there is no need to worry about turning the firewall off for testing.

Anyone having problems with airport extreme and a BT homehub?

i have a BT homehub broadcasting wirelessly connected into a airport extreme unit.
the wireless connection keeps on dropping off, i run diagnostics and sometimes i have to re-enter the network password and other times it reports airport is working fine.
i am sure the problem is with the homehub. i wonder if i turned the homehub's wireless of the connection might be better!
any thoughts?
many thanks

Yes, that might help reduce the likelihood that these two wireless routers are interfering with each other's wireless network, resulting in the symptoms you have described.
The other thing you could do is configure the AEBSn for "n only" wireless transmission. You could then use the HomeHub for slower b/g connections, and the AEBSn for faster n-only connections.

Hi I am having problems with my old airport extreme base station. It is a 802.11g with airport utility version 5.5.3.

On a regular basis connection is lost by al of the apple products connected to it even though signal strength is still showing to be good and its green light is still on. The only way to resolve seems to disconnect it from the power and then reconnect. All the apple products connected to it are more up to date than the bsae stationis this the problem?

All the apple products connected to it are more up to date than the bsae stationis this the problem?
I think it may have more to do with the older AirPort Base Station failing than it has to do with the fact that you have newer Apple products.
One option is to perform a "factory default" reset on the Extreme, and then, reconfigure as required for your networking needs. If after this type of reset, the Extreme still acts up as you described, it may be faulty or about to fail.

Airport Extreme Printing Problem with HP Deskjet.

Hello ... I wonder if any helpful folks can assist me with my printing problem? I am using Tiger on a new Intel imac with a HP Deskjet 960C. This printer is listed as having the latest drivers included within Tiger and works perfectly when connected via USB so my problem I guess is not with the software....I have disconnected everything and plugged everything back together again. I also deleted the printer from the printer list within the Printer Setup Utility application.... The imac recognisies the printer and upon pressing the print button everything feels as though its just going to work. The blue barber shop scroll appears but the printer fails to kick into gear and I get the big red exclamation mark appearing in the status box .... I would really love to try and sort this annoying error ... Any ideas? Thanks. Book G4 Mac OS X (10.4.4)

Hello jds17. Welcome to the Apple Discussions!
Unfortunately, not all USB printers are compatible with AirPort base stations.
Take a look at one of these iFelix Unofficial AirPort Printer Compatibility links, depending on which AirPort base station you have:
o 802.11g AirPort Extreme Base Station (AEBS) or AirPort Express Base Station (AX)
o 802.11n AirPort Extreme Base Station (AEBSn)
If your printer isn't listed, it doesn't necessarily mean it won't work, but simply that it has not been verified. iFelix also provides the following workaround for printers not on the list that would certainly be worth a try.
Also, you may find the following Apple article helpful.

PROBLEM with new Airport Extreme

i just bought the new airport extreme and what was supposed to be a simple setup process has taken longer than 10 hours!
please help!
i have 3 computers.
2 are macs, they will be using wireless. 1 is a PC, which will be wired to the airport extreme.
the airport extreme is connected to a VOIP router, which is then connected to the DSL router.
i have always used my old airport extreme without issues, but because i want to connect the PC as well, i must ditch the airport express in favour for one with LAN ports. hence, the troublesome airport extreme.
it doesn't work.
none of my computers can recognize the new network. (even though i've established one, with passwords and everything)
the router flashes amber - internet works, but not wireless.
the router periodically flashes green - ironically, nothing works then!!!!
please help!!!
EDIT: DIAGRAM
1. WHEN IT WORKED:
INTERNET --> PROVIDER ROUTER --> VOIP ROUTER --> AIRPORT EXPRESS --> MAC 1, MAC 2 (WIRELESS)
2. WHEN IT DOESN'T WORK:
INTERNET --> PROVIDER ROUTER --> VOIP ROUTER --> AIRPORT EXTREME --> MAC 1, MAC 2 (WIRELESS), PC (WIRED)

It appears to me that you may possibly have sever conflict issues as well as maybe not having the Network confiqured correctly.
I have a 3 story OLD VICTORIAN and I am using the Old Airport Extreme Base and have expierianced NO PROBLEMS at all.
If I may suggest a different approach.
Try to start from scratch.
SHUT EVERYTHING OFF.
Run an ethernet cable from your Internet Service Providers MODEM to the WAN port of the Airport Extreme Base
Set it up DHCP and you want the Airport to distribute IP's
use the Airport setup assistant and Airport Admin Utility.
Using 2 Routers in the mix unless you have ony one the main to distribute the IP's, IF you have 2 Routers and they are both set up to distribute the IP's there is your problem.
The New Airport Extreme Base is far better then the older model and you shouldn't need another router in the mix at all to get the coverage of your entire house.
Take the Netgear clear out and use the Airport Extreme and the Expresses as you had them before. There is a very good possibility that you will need to do evrything one at a time and step by step.
Do not just plug everything in, and turn everything on and expect it to work. Do everthing step by step with all security disabled to begin with.
Be sure when you do your system reset that you start by powering up the MODEM 1st and wait for it to acquire the signal before you power up the Airport Extreme and again you must wait for it to acquire the signal. You can use the LAN Ports for anyyhing you need HARDWIRED. If you don't wait and do things in the proper order you will have problems, I can't stress enough that it must be done in the proper sequence. Have a look at the Paperwork of either the Netgear's Yellow Phamplet or the Booklet that came with the Extreme to bear out what I explained on the sequence.
Don

Is there a software problem with Airport Extremes?

I recently bought a new 802.11ac next generation AE to replace my old generation AE mainly for the increased wifi speeds. I have been having trouble though getting my proper wired speed using the router though. I didn't have problems with the previous version in the past. But now using the new one I get low speeds at times, but its not constant. I have comcast and get 60 mbps speeds when hooked up straight to my PC. Using the AE, at times I get the same speeds, but usually now it drops all the way to like 12 mbps. I don't understand what it is, and thought about returning the AE but I have past my purchase time to return. The other night I used speedtest.net and I got 12 mbps. So I unplugged the comcast modem and restarted everything and it went back up to 60 mbps. But it seems to drop down to 12 constantly. I tried the same process last night, and it did not return to 60 mbps, it stayed at 12. So I still have my old AE, and hooked that up figuring I would not have the same issue. Yet I totally did. 12 mbps again. So is this some sort of software issue that is making this happen, I don't understand it. I see people having trouble with WiFi speeds on here, but this is a wired connection. I also thought I would test the wifi for the heck of it while I was getting 12 mbps wired through my AE. So I used my phone connected to wifi and ran speedtest, and I got 23. So how can my wifi speed get higher returns than my wired connection? Can anyone help?
Thanks,
Eddie

I'm having a similar issue. I have TWC turbo cable in Manhattan. I get 20Mbps download speed when I connect a Mac directly to the modem via ethernet. When I use the current gen AirPort Extreme, my internet speed gradually decreases to unusable. Less than 1Mbps. Websites timeout before loading. My LAN still works, but internet crawls. Doesn't matter if a device is wired directly to Airport or wirelessly connected - internet crawls, if I'm lucky.
This is after weeks of things running perfectly with this airport. Over the past few days, I'm dying.
I spent time with TWC to make sure it wasn't on their end. Reset the modem. Ran signal tests. Rebooted everything. It's not an issue on their end. As soon as I plug directly into their arris modem, I'm golden. 20Mbps download again.
I hard reset my AirPort Extreme, and set it up as if it was brand new. But internet speeds still drop to slow to unusable when I'm going through AirPort Extreme.
Had some luck getting speeds up to usable by specifying DNS servers from TWC in airport, but this was false hope. Overnight, internet speeds were back down to less than 1Mbps.
Again, if I connect a mac directly to the modem, I'm getting 20Mbps speeds again, as I should.

My Atv2 is very slow movies and shows take forever to load it plays for a few minutes then pauses again. I thought if was a problem with my wireless router but I replaced it with a new airport extreme and the problem persists. Air play is just as slow.

My Atv2 is very slow with both AirPlay and rented and purchased content I spoke to apple rep and tried the things he suggested but the problem persists. Now it requires more lead time then the lenght of material being viewed. I haves broadband internet connection and airport extreme router so I don't think this should be a problem. Lately every time the unit goes to the screen saver an error message come up saying there was an error while loading content please try again later and you have to all over again. It is extremely frustrating. Any suggestions? What speed of transfer should I expect using AirPlay ?

I'm having the same issue. Ay fixes? Bought ATV today, music streams but videos don't and mirroring doesn't work either. Start mirror and severe lag then just drops. Been trying for couple hours. About ready to return it.

Are you having problems with Windows XP Pro and Airport Utility Updates?

I was having problems with my wireless laptop setting up my Bonjour Printer. I checked to make sure I had downloaded the latest updates to Airport Utility and Bonjour. Check. After doing this I noticed I couldn't see my Airport Extreme through the Airport Utility. After much frustration and bringing my entire network crashing down around me, I got help from a knowledgeable guy from Cox Cable in San Diego. He helped me get my trusty iMac Power PC online. It saw my Airport Extreme but no answers were forthcoming in any forums about my XP issues. Here is what finally solved my problem. I uninstalled all Airport Utility and Bonjour Programs. I then went back to Airport Utility 5.3.1 for Windows. It installs Bonjour Printer services with this download. Everything is working perfectly again. I have my Canon Pixma MP500 connected to the USB port on my AEBS and Bonjour walked right through the setup process. I suggest that if this works for you, turn off all Airport Utility and AEBS firmware updates until you see that whatever issue Apple created with these updates gets fixed.

Well... it worked! :D
I'm pretty sure the extra 512 memory stick was the problem, that would explain why it was being inconsistent with its type of failures before. I'm going to reinstall it later and run memtest86 and try and see if i can get it to work at all somehow without causing problems, cuz 1.5 was already low enough...
DryHeat, yeah it was with SP2 but I got it installed now so no worries
Thanks a lot!

Airport Extreme - problem with usb printer and usb disk

I have Airport extreme with firmware 7.1. I try connect usb disk and usb printer with usb-hub to airport. I can't get disk or printer working. Also try connect only disk or printer without usb-hub to airport getting same problem. How I get disk and printer working with wireless network (windows pc computers)?
1)
My printer is HP PSC 1210 all-in-one ( http://h10025.www1.hp.com/ewfrf/wc/product?product=90764&lc=fi&cc=fi&dlc=fi&lang =fi&cc=fi&y=0&x=0 )
- printer seems working fine after installing bonjour printer installing wizard.
- I get error (in windows) when I try print document from word. Error only says "error printing" in status value.
- In airport utility all seems ok. Airport see usb printer "Hewlett-Packard psc 1200 series"
- printer protocol is RAW and driver manufacture HP (also try with microsoft driver)
2)
USB disk is Targa Databox II 250
- Airport utility says "Disk needs repair. Errors were found with a disk connected to your airport base station. please connect the usb disk to your mac or pc and use disk utility or another disk application to repair the disk"
- I have connected Targa usb disk to windows pc and run scandisk and defreg. No errors found in windows. Result..no help for airport

I have a similar problem to your second issue. Tried connecting a Netdisk to the USB port of the Airport Extreme and it also said there was a problem with the disk. Have performed a low level format on the disk and Airport Extreme still complained the disk had a problem.
After unplugging the disk, my route decided to stop allowing wireless connections even after rebooting. Ended up having to hard reset the Airport Extreme and reconfigure it with my old settings to work again.
FWIW, the first Airport Extreme I purchased today only worked on 802.11a and steadfastly refused to work on b/g so had to get a replacement. I suspect Apple's quality control is not quite as good as it used to be.

Airport Extreme, Airdisk, and Vista - large file problem with a twist

Hi all,
I'm having a problem moving large-ish files to an external drive attached to my Airport Extreme SOMETIMES. Let me explain.
My system - Macbook Pro, 4gb ram, 10gb free HD space on macbook, running latest updates for mac and vista, external hard drive on AE is an internal WD in an enclosure w/ 25gb free (its formatted for pc, but I've used it directly connected to multiple computers, mac and pc, without fail), AE is using firmware 7.3.2, and im only allowing 802.11n. The problem occurs on the Vista side - havent checked the mac side yet.
The Good - I have bit torrents set up, using utorrent, to automatically copy files over to my airdisk once they've completed. This works flawlessly. If i connect the hard drive directly to my laptop (macbook running bootcamp w/ vista, all updates applied), large files copy over without a hitch as well.
The Bad - For the past couple weeks (could be longer, but I've just noticed it recently being a problem - is that a firmware problem clue?) If i download the files to my Vista desktop and copy them over manually, the copy just sits for a while and eventually fails with a "try again" error. If i try to copy any file over 300mb, the same error occurs.
What I've tried - well, not a lot. The first thing i did was to make sure my hard drive was error free, and worked when physically connected - it is and it did. I've read a few posts about formatting the drive for mac, but this really isnt a good option for me since all of my music is on this drive, and itunes pulls from it (which also works without a problem). I do however get the hang in itunes if i try to import large files (movies). I've also read about trying to go back to an earlier AE firmware, but the posts were outdated. I can try the mac side and see if large files move over, but again, i prefer to do this in windows vista.
this is my first post, so im sure im leaving out vital info. If anyone wants to take a stab at helping, I'd love to discuss. Thanks in advance.

Hello,
Just noticed the other day that I am having the same problem. I have two Vista machines attached to TC w/ a Western Digital 500 gig USB'd. I can write to the TC (any file size) with no problem, however I cannot write larger files to my attached WD drive. I can write smaller folders of music and such, but I cannot back up larger video files. Yet, if I directly attach the drive to my laptop I can copy over the files, no problem. I could not find any setting in the Airport Utility with regards to file size limits or anything of the like. Any help on this would be much appreciated.

I hope this might interest someone. The situation; 3 floors,I am having trouble with an an Airport Extreme, 802.11n on the top floor and a Mac Pro 3.1 on the bottom floor. Not always but often it has trouble seeing the Airport and making a connection. I h

I'm not sure how to post a message. I hope this might interest someone. The situation; 3 floors,I am having trouble with an an Airport Extreme, 802.11n on the top floor and a Mac Pro 3.1 on the bottom floor. Not always but often it has trouble seeing the Airport and making a connection. I have an older Airport Express, would it help to install it? would it work best if it was installed in the same room? should it be installed half way in between? Get another Extreme? The Mac Book Pro on the middle floor can see 11 networks in the neighbourhood if that might be causing a problem or would if I installed the Express. Thank for your consideration.

Thanks for your time ... I appologize for the font and colour, I compossed the question in pages and failed to notice the font colour as grey ... there are a variety of computers of various ages so I think it is using a setting that allows both 5G and 2.4 ... the connection to the Airport is thru a cable modem and cable does run throuhout the house ... maybe those hard wires would be a place to look at ... do you think that putting the 'Express' on the second floor might help ... thanks again ...

Skype problems with Airport Extreme after update

I use Skype to call regular phones and landlines. For over a year now it has worked well with my Airport Extreme, however, I noticed that around the same time I updated my Airport utility to 5.5.2 and Mac OS X update on 1/7/11 I am having problems with audio getting scrambled, the person on the other end dropping out, and my voice dropping out of their calls and the sound of me "being in a long tunnel," as they describe it. If I plug the ethernet directly into my computer there is no problem so I know it is the Airport base station.
I have tried plugging and unplugging the base station and I had comcast reset my cable modem but nothing seems to be working. I have 12 mbps internet so I know it is not a bandwidth problem.
Please help! Thank you!

Indeed I have the same problem. I ended up buying a new router because I thought mine was malfunctioning. After buying the latest generation Airport Extreme, turns out it's having the same problem. I agree that it was not a problem until 5.5.2. Also, I use YouSendIt constantly and it also chokes the Airport Extreme. It appears to happen in scenarios of high bandwidth usage.
5.5.3 maybe coming soon?

Problems with airport extreme and windows vista

Hi, I have windows vista and I'm having problems conecting it to air port extreme. The only way I can make airport extreme work is to disconect and reconect the powercord and then my computer reconizes it.
Any sugestions would be helpful.

I just got off the HP "chat" technical assistance about my HP DV6500z doing this same thing. At least for my model there is an October BIOS update. She had me re-install the Broadcom drivers and run the BIOS update. Now the whole computer runs faster in addition to connecting wirelessly! Not only that, I can use the "closed" network feature through the Airport Utility to hide my network as I did in the past and the PC finds it! I guess through all of the very testy notes on HP's discussion board they finally came through (well, at least on this model). My model has the AMD processor so if yours is Intel it may not be the same. I recommend going to their TA chat line or type in your model on their Software & Driver page to see if there is a recent revision on your models BIOS. The one I downloaded was dated 10-2007.

Having a problem in conecting with airport extreme 802.11n wi-fi on ipad2, having a problem in conecting with airport extreme 802.11n wi-fi on ipad2

Similar Messages

Maybe you are looking for