Having an issue with GoLive - I need help!?!

I need to figure out how to "reset" setting on Adobe Go Live (CS2).
The other day all of a sudden, I lost all of the 'preview pane' buttons. It has layout and source still, but the two preview (pdf and regular) are missing. Also - all of the images are still there in the source and when you view the html in a browser, but in the main screen - all of the images now show a "broken image" icon.
What happened and how do I fix?
Thanks in advance.

*Im wondering if theres a way get the song information on the library, rather than having to go through and to have to type every artist and title?*
Are you importing commercial CDs or CD-Rs? If they are ones you made yourself the track names will be seen as Track 01, Track 02 etc. and the information has to be keyed in again by hand. For commercial CDs, you have to connect to the internet as iTunes picks up the track information from an online database. It will do this automatically if you are connected while you are importing or you can do it afterwards by connecting to the internet, highlighting the tracks and going to Advanced>Get CD Track names:
iTunes for Windows - I don't see the names of songs
How iTunes remembers Audio CDs

Similar Messages

2 issues with my phone need help !!

I am having problems with my app store, when I am downloading an app it is always stuck on 92% that's 1 issue, my second issue is my messages when I send a message it keeps saying sending I don't know why. I need help with these 2 issues Please & Thank You

What phone?

I am having a problem with the shutdown need help....

When I shutdown my computer I get a message saying that I had to shut my computer down even though I was, here is the report, can anyone help me? I don't have the protection plan anymore it ended a year ago.....
Interval Since Last Panic Report: 249821 sec
Panics Since Last Report:          1
Anonymous UUID:                    FC186157-8A25-430D-B57B-4BE000A0D7CD
Wed Jul 13 01:42:39 2011
panic(cpu 0 caller 0x2abf6a): Kernel trap at 0x8b0e5bf9, type 14=page fault, registers:
CR0: 0x8001003b, CR2: 0x4b3a4000, CR3: 0x00100000, CR4: 0x00000660
EAX: 0x00000000, EBX: 0x4b3a4000, ECX: 0x00000005, EDX: 0x0081e03c
CR2: 0x4b3a4000, EBP: 0x8ae4be28, ESI: 0x15f60244, EDI: 0x8ae4bf40
EFL: 0x00010206, EIP: 0x8b0e5bf9, CS: 0x00000008, DS: 0x00000010
Error code: 0x00000000
Backtrace (CPU 0), Frame : Return Address (4 potential args on stack)
0x8ae4bc38 : 0x21b837 (0x5dd7fc 0x8ae4bc6c 0x223ce1 0x0)
0x8ae4bc88 : 0x2abf6a (0x59e3d0 0x8b0e5bf9 0xe 0x59e59a)
0x8ae4bd68 : 0x2a1a78 (0x8ae4bd80 0x8adbb8e0 0x8ae4be28 0x8b0e5bf9)
0x8ae4bd78 : 0x8b0e5bf9 (0xe 0x50c0048 0x10 0x10)
0x8ae4be28 : 0x8b0e5205 (0x15f50684 0x0 0x47b1eb 0x0)
0x8ae4be48 : 0x8b0e6c7b (0x1630cd90 0x1 0x47b232 0x0)
0x8ae4be68 : 0x47b21d (0x15c67d04 0x1 0x0 0x2)
0x8ae4bec8 : 0x4b6d1e (0x15c4d9f0 0x8ae4bf40 0x8ae4bef8 0xe)
0x8ae4bf28 : 0x4be6f7 (0x15c4d9f0 0x8ae4bf40 0x8ae4bf40 0x584ef4)
0x8ae4bf78 : 0x4f7f90 (0x15c63a80 0x15bc4ba0 0x15bc4be4 0x0)
0x8ae4bfc8 : 0x2a1fd8 (0x15b08240 0x2 0x2a17ab 0x15b08240)
      Kernel Extensions in backtrace (with dependencies):
         com.mcafee.kext.Virex(1.0.0d1)@0x8b0e4000->0x8b0e8fff
BSD process name corresponding to current thread: VShieldScanManag
Mac OS version:
10K540
Kernel version:
Darwin Kernel Version 10.8.0: Tue Jun 7 16:33:36 PDT 2011; root:xnu-1504.15.3~1/RELEASE_I386
System model name: MacPro1,1 (Mac-F4208DC8)
System uptime in nanoseconds: 62497321338231
unloaded kexts:
com.apple.filesystems.cd9660          1.4.1 (addr 0xf07000, size 0x36864) - last unloaded 22062267315969
loaded kexts:
com.mcafee.kext.Virex          1.0.0d1
com.apple.driver.AppleHWSensor          1.9.3d0 - last loaded 21446489075474
com.apple.driver.AppleUpstreamUserClient          3.5.7
com.apple.driver.AppleMCCSControl          1.0.20
com.apple.driver.AppleHDA          2.0.5f13
com.apple.driver.AudioAUUC          1.57
com.apple.GeForce          6.3.6
com.apple.driver.AppleUSBDisplays          289
com.apple.Dont_Steal_Mac_OS_X          7.0.0
com.apple.driver.AppleMCEDriver          1.1.9
com.apple.driver.AudioIPCDriver          1.1.6
com.apple.driver.AppleIntelMeromProfile          19
com.apple.driver.ACPI_SMC_PlatformPlugin          4.7.0a1
com.apple.driver.AppleLPC          1.5.1
com.apple.filesystems.autofs          2.1.0
com.apple.iokit.SCSITaskUserClient          2.6.8
com.apple.BootCache          31.1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib          1.0.0d1
com.apple.driver.AppleIntel8254XEthernet          2.1.3b1
com.apple.driver.AppleUSBHub          4.2.4
com.apple.iokit.IOAHCIBlockStorage          1.6.4
com.apple.driver.AirPortBrcm43224          428.42.4
com.apple.driver.AppleAHCIPort          2.1.7
com.apple.driver.AppleIntelPIIXATA          2.5.1
com.apple.driver.AppleFWOHCI          4.7.3
com.apple.driver.AppleEFINVRAM          1.4.0
com.apple.driver.AppleUSBEHCI          4.2.4
com.apple.driver.AppleUSBUHCI          4.2.0
com.apple.driver.AppleACPIButtons          1.3.6
com.apple.driver.AppleRTC          1.3.1
com.apple.driver.AppleHPET          1.5
com.apple.driver.AppleSMBIOS          1.7
com.apple.driver.AppleACPIEC          1.3.6
com.apple.driver.AppleAPIC          1.4
com.apple.driver.AppleIntelCPUPowerManagementClient          142.6.0
com.apple.security.sandbox          1
com.apple.security.quarantine          0
com.apple.nke.applicationfirewall          2.1.12
com.apple.driver.AppleIntelCPUPowerManagement          142.6.0
com.apple.driver.AppleProfileReadCounterAction          17
com.apple.driver.DspFuncLib          2.0.5f13
com.apple.driver.AppleProfileTimestampAction          10
com.apple.driver.AppleProfileThreadInfoAction          14
com.apple.driver.AppleProfileRegisterStateAction          10
com.apple.driver.AppleProfileKEventAction          10
com.apple.driver.AppleProfileCallstackAction          20
com.apple.nvidia.nv50hal          6.3.6
com.apple.NVDAResman          6.3.6
com.apple.iokit.IONDRVSupport          2.2
com.apple.iokit.IOFireWireIP          2.0.3
com.apple.iokit.IOSurface          74.2
com.apple.iokit.IOBluetoothSerialManager          2.4.5f3
com.apple.iokit.IOSerialFamily          10.0.3
com.apple.iokit.IOAudioFamily          1.8.3fc2
com.apple.kext.OSvKernDSPLib          1.3
com.apple.driver.AppleHDAController          2.0.5f13
com.apple.iokit.IOGraphicsFamily          2.2
com.apple.iokit.IOHDAFamily          2.0.5f13
com.apple.iokit.AppleProfileFamily          41
com.apple.driver.AppleSMC          3.1.0d5
com.apple.driver.IOPlatformPluginFamily          4.7.0a1
com.apple.driver.CSRUSBBluetoothHCIController          2.4.5f3
com.apple.driver.AppleUSBBluetoothHCIController          2.4.5f3
com.apple.iokit.IOBluetoothFamily          2.4.5f3
com.apple.driver.AppleUSBHIDMouse          162
com.apple.driver.AppleHIDMouse          162
com.apple.driver.AppleUSBMergeNub          4.2.4
com.apple.iokit.IOUSBHIDDriver          4.2.0
com.apple.driver.AppleUSBComposite          3.9.0
com.apple.iokit.IOSCSIMultimediaCommandsDevice          2.6.8
com.apple.iokit.IOBDStorageFamily          1.6
com.apple.iokit.IODVDStorageFamily          1.6
com.apple.iokit.IOCDStorageFamily          1.6.1
com.apple.driver.XsanFilter          402.1
com.apple.iokit.IOATAPIProtocolTransport          2.5.1
com.apple.iokit.IOSCSIArchitectureModelFamily          2.6.8
com.apple.iokit.IOUSBUserClient          4.2.4
com.apple.iokit.IO80211Family          320.1
com.apple.iokit.IONetworkingFamily          1.10
com.apple.iokit.IOAHCIFamily          2.0.6
com.apple.iokit.IOATAFamily          2.5.1
com.apple.iokit.IOFireWireFamily          4.2.6
com.apple.iokit.IOUSBFamily          4.2.4
com.apple.driver.AppleEFIRuntime          1.4.0
com.apple.iokit.IOHIDFamily          1.6.6
com.apple.iokit.IOSMBusFamily          1.1
com.apple.kext.AppleMatch          1.0.0d1
com.apple.security.TMSafetyNet          6
com.apple.driver.DiskImages          289
com.apple.iokit.IOStorageFamily          1.6.3
com.apple.driver.AppleACPIPlatform          1.3.6
com.apple.iokit.IOPCIFamily          2.6.5
com.apple.iokit.IOACPIFamily          1.3.0
Model: MacPro1,1, BootROM MP11.005C.B08, 4 processors, Dual-Core Intel Xeon, 2.66 GHz, 13 GB, SMC 1.7f10
Graphics: NVIDIA GeForce 8800 GT, NVIDIA GeForce 8800 GT, PCIe, 512 MB
Memory Module: global_name
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0x87), Broadcom BCM43xx 1.0 (5.10.131.42.4)
Bluetooth: Version 2.4.5f3, 2 service, 19 devices, 1 incoming serial ports
Network Service: AirPort, AirPort, en2
PCI Card: NVIDIA GeForce 8800 GT, sppci_displaycontroller, Slot-1
Serial ATA Device: WDC WD2500JS-41SGB0, 232.89 GB
Serial ATA Device: ST32000542AS, 1.82 TB
Parallel ATA Device: PIONEER DVD-RW DVR-111D
USB Device: Hub, 0x05ac (Apple Inc.), 0x912f, 0xfd400000 / 3
USB Device: Apple Cinema HD Display, 0x05ac (Apple Inc.), 0x9221, 0xfd420000 / 5
USB Device: Hub, 0x05ac (Apple Inc.), 0x9131, 0xfd300000 / 2
USB Device: Apple Cinema HD Display, 0x05ac (Apple Inc.), 0x9223, 0xfd320000 / 4
USB Device: Bluetooth USB Host Controller, 0x05ac (Apple Inc.), 0x8206, 0x5d200000 / 3
USB Device: Hub in Apple Pro Keyboard, 0x05ac (Apple Inc.), 0x1003, 0x5d100000 / 2
USB Device: Apple Optical USB Mouse, 0x05ac (Apple Inc.), 0x0304, 0x5d110000 / 5
USB Device: Apple Pro Keyboard, 0x05ac (Apple Inc.), 0x020b, 0x5d130000 / 4
FireWire Device: built-in_hub, Up to 800 Mb/sec
FireWire Device: unknown_device, Unknown

Okay, uninstalled the program... But I am still having the issue of the power button icon coming up in the background telling me to shutdown the computer and turning on the computer. Could this be a bad hard drive? I did some research on it befor I bought the 2 TB hard drive. I got the Seagate Barracuda HD. When I looked it up on the Internet the website said that the errors were taken care of for this particular HD. Unless I was miss informed. Is there a way some one can help me find out what this error belongs to? I don't know if it is actually the HD or not.

Issues with N80. Need help badly!!

I got my N80 as a gift a week ago. It was purchased in dubai ( which is in the middle east). 2 days ago i transferred some files from my phone to the computer and ever since the next morning my phones been acting weird. applications close, its slow, battery life is really bad (like 5 hours), my signal bar and batter life bar disappear for a while and the phone powers off by itself. Today I removed the memory card and tried the phone and it seems to be working fine now and I am not having any issues. I am assuming and hoping that the card got affected when i was uploading the files from my phone and that there is no problem with the phone. I have been advised to send the phone back to the middle east to get it checked and possibly repaired. this is something I dont want to do at the moment because i like the phone and it will be a long time before i get it back. My question is if anyone else has had a similar problem, is it the memory card that is faulty and should I just get a new card or should I actually send the phone back to get it checked totally, in case its the phone that is faulty? also I have read that a new firmware is out. Can i get that off the net or it has to be uploaded at a local service centre ( which unfortunately is in the middle east again and not in Canada where I am at the moment)? The firmware on my phone is V 3.0617.0.6 and was updated on 03-05-06 RM-92 Nokia N80 (08). Is this firmware ok for now as I will be going to the middle east in december and can get it done then. Or should i just send the phone now and get the firmware updated and also get the memory card problem sorted out?

07-Sep-2006
07:07 AM
manta wrote:
I have not experienced similar behaviour, but if you connected phone via cable to a PC and used the data transfer mode to move the files to PC, that equals to mass storage mode that shows the memory card as expernal memory in Windows Explorer and it is important to remove the phone then safely using the remove harware option in Windows, di dyou do that ?
If not, the memory card can get corrupted and corrupted memory card can mak the phone behave badly.
I would just go and buy a new memory card and then when connecting to PC always use the safe removal before disconnecing the phone.
Or install PC Suite, the´connection method is different and no safe removal needed.
I did use PC suite while transferring the files which makes it even more weirder. But yes i did not do that safely remove hardware thing. I thought that it wouldnt be needed since im using PC suite. do u have any idea about the firmware? should i get it updated now back in dubai or wait till i go back myself in december?

Serious Issue with Linkage..Need help ASAP!

OK, I have big deadline for Monday and I can't figure this
out. I have a bunch of movieclips that are set up with linkage for
actionscript and set to export in first frame. Everything was fine
and dandy for a week. Now all of a sudden Flash hangs when I try to
export the swf. If I turn off the export in first frame everything
is fine. The problem then is that my move clips aren't available
for the attachmovie call. What I don't understand is why it was
fine, then all of a sudden this happened for no apparent reason.
Has anyone got a workaround or solution for this? I need help with
this ASAP. Thanks.
--Paul

Sadly nothing you can do. The file must be corrupted.
sometimes files that need saving corrupt themselves (product of
voltage variations or some other physical things) making some
objects "BAD", maybe you can save your work if you determine what
is the only object that is corrupting all the file and delete and
and redraw it.

Toshiba M35X S109, having great issues with installing software - PLEASE help.

I have a Toshiba M35x S109 and lost my harddrive. I installed a new one and tried to reinstall software from the Toshiba Recovery and Applications/Drivers DVD. When I first tried this it came up to the first page that said to press F1 for ok or F2 to cancel. I pressed F1. Then it went to the warning page telling me that all the data on harddrive would be lost if I continued. Press A to abort or C to continue. I pressed C. It took me back to the first page again. This happened over and over.
I called tech support and they told me I had a bad disc and could either get a new one or install from a full version of Windows. I tried that as I have a full version of Windows 98 and an Upgrade version of Windows XP Home Edition. I got the Windows 98 on and get to the desktop but can not seem to get the keyboard to work. Mouse works, but keyboard does not work at all. Reinstalled Win 98 as instructed by Tech Support and it worked. Then we hung up and I did as they instructed and tried installing the upgrade to Win XP home ed, but when I needed to input the product key - again the keyboard does not work. URGH.
I called tech support back again and was told the previous tech support gave me bad info. This guy said I needed to install from the Toshiba restore disc and left me with a million instructions that I did not understand on how to erase the harddrive of the Win 98 and then start over with the Toshiba restore disc.
I am so frustrated and confused and really need some good advice and help. I have the 98 installed but the keyboard is not working. The pc initially had the Win XP on it. I will likely upgrade to the Win 7 if I get this going but can't get past this issue. What should I do?????
Do I need to erase WIN 98 and start again from the Toshiba Restore Disc?
If so, why would the Restore disc not work when I initially put it in and try? This problem continues to reoccur with the old and new Toshiba Restore Disks. What else could be causing this?
Can I go from Win 98 and fix the driver issue or what ever it is and move on with the rest? How do I fix the problem with the keyboard?
ANY AND ALL HELP is very much appreciated! Thank you.
AJJMH
Solved!
Go to Solution.

Did the flash complete, or shut off prior to finishing? If the former there is a chance, but if the latter there is little that you can do at home to fix this (as in, if you need to ask you have neither the equipment or the skill set to fix it yourself).
Do you have the Intel or the ATI graphics on your laptop?
What bios revision was on the laptop originally? If you don't know that then why were you trying to update the bios as you wouldn't know what revision to install? Plus, it would have come with at least rev. 1.0 installed already so why would you want to install that again? Trying to install an older revision over a newer one won't work without some specific flags added to the command.
Did you flash from a startup disk or from Windows?
Can you get into the bios settings by pressing the F2 key (or whatever key that model requires)?
Have you tried a reset of the system by doing the following. Unplug the AC adapter, remove the battery, then press and hold the power button down for a minimum of 30 seconds. Now replace the battery and AC and see if you can now access the BIOS when it starts to power up.
Are you sure that the new hard drive is properly installed AND working correctly? Did it work prior to what appears to be a failed bios flash?
I'll try to help, but I'm afraid this might be a bad flash which will require sending (or taking) it to a qualified repair shop/technician who has the special equipment and skillset to reflash the bios using an Eprom burner and that will run you about $100 or so the last time I checked.
If you don't post your COMPLETE model number it's very difficult to assist you. Please try to post in complete sentences with punctuation, capitals, and correct spelling. Toshiba does NOT provide any direct support in these forums. All support is User to User in their spare time.

Issue with corrupted document, need Help !

Dear all,
In our company we use daily Indesign 7.5 (cs 5.5 package) and when we export the .ind document to .pdf the system crash.
Above this the original document (.ind) is corrupted and we're not able to open thedocument.
We loosed a lot of work and we're not able to restore de document.
When we try to open the corrupted document this message appear :
Can somebody help me?
Thx and have a nice day.

Thank you, yes, we at Markzware can try to help with your corrupt InDesign documents, for sure.
From as far as we can see when dealing with the odd corrupt InDesign file from time to time, is that it comes down to three main reasons why these InDesign documents have issues:
Font(s)
Image(s)
PowerOutage or Forced Stopped
Fonts can indeed be a corrupt font itself, but also corrupt, over-loaded or otherwise odd-balled font caches. Here is a video on how to clear font caches in InDesign and although for a Mac in this video, I think you'll get the idea on how to do that on a PC as well:
One highly corrupted image can ruin the show for your entire file. Check all images individually till you find the bad one and remove that. Also, more times then I can count, InDesign users drag-and-drop images from a web browser while visiting a web page, right into an InDesign layout. That is a big no-no. Not saying your are doing that, but just covering what can happen in the images category and a bad InDesign file.
As for the odd power outage, well that is something maybe Tesla could have helped us with, but until a time when we are not dependant on AC/DC currents, it will remain a sore point. Power in your cases is likely not the issue though.
Always report issues like these to Adobe though. They can also often help and if not right away, at least they may gather important details to help stop that type of corruption in the future.
If all else fails and as mentioned, we as Markzware can help try and fix your files - Bad InDesign or Quark File Recovery Service
Friendly Regards,
David
Markzware

Issue with GREP. Need help to solve it pls...

Hi,
I have set a GREP as follow:
Paragraph style: numbered + capital letters
GREP: $.+?$ so that everything between () is written italic.
When the list of ingredients is too long, I need to go to the next line (shift + enter). Then it is like if the GREP gets broken...
I have tried to put a \n but it doesn't work...
Going crazy here
Can anyone help?
Thank you so m uch!

Solution found...
FYI here is the correct grep: $.+$

Having compiler issues with Array, can anyone help please?

Using your Invoice class created in lab02, write a client program that allows the user to input three Invoice objects into an array of Invoice objects. After you have inputted all of the invoices, print a heading and then output all of the array elements (Invoice objects) by calling the method from your Invoice class that displays all of the data members on a single line using uniform field widths to insure that all Invoice objects will line up in column format (created in Lab04). At the end of the loop, display the calculated total retail value of all products entered in the proper currency format.
Example of possible program execution:
Part Number : WIDGET
Part Description : A fictitious product
Quantity : 100
Price          : 19.95
(etc.)
Example of possible output
Part Number          Part Description          Quantity          Price     Amount
WIDGET          A fictitious product     100          19.95     199.95
Hammer               9 pounds          10          5.00     50.00
(etc.)
Total Retail Value:                                   249.95
This is what I have so far at the bottom, can anyone tell me what I'm doin wrong please
//Invoice Lab 6
//Application to test class Invoice with arrays
public class InvoiceTest
public static void main( String args[] )
Invoice invoice1 = new Invoice( "1234", "Hammer", 2, 14.95 );
Invoice array [] = new Invoice [2];
array [0] = new Invoice ("1234", "Hammer", 2, 14.95);
array [1] = new Invoice ("5678", "PaintBrush", -5, -9.99);
double total = 0.0;
System.out.println("Part Number                    Description               Quantity          Price               Amount");
System.out.println("----------------------------------------------------------------------------------");
for (int i=0; <=2; i++)
total+=array.getPaymentAmount();
     system.out.println("The Total retail value is: %.2f\n")
// display invoice1
System.out.println( "Original invoice information" );
System.out.printf( "Part number: %s\n", invoice1.getPartNumber() );
System.out.printf( "Description: %s\n",
invoice1.getPartDescription() );
System.out.printf( "Quantity: %d\n", invoice1.getQuantity() );
System.out.printf( "Price: %.2f\n", invoice1.getPricePerItem() );
System.out.printf( "Invoice amount: %.2f\n",
invoice1.getInvoiceAmount() );
// change invoice1's data
invoice1.setPartNumber( "001234" );
invoice1.setPartDescription( "Blue Hammer" );
invoice1.setQuantity( 3 );
invoice1.setPricePerItem( 19.49 );
// display invoice1 with new data
System.out.println( "\nUpdated invoice information" );
System.out.printf( "Part number: %s\n", invoice1.getPartNumber() );
System.out.printf( "Description: %s\n",
invoice1.getPartDescription() );
System.out.printf( "Quantity: %d\n", invoice1.getQuantity() );
System.out.printf( "Price: %.2f\n", invoice1.getPricePerItem() );
System.out.printf( "Invoice amount: %.2f\n",
invoice1.getInvoiceAmount() );
Invoice invoice2 = new Invoice( "5678", "PaintBrush", -5, -9.99 );
// display invoice2
System.out.println( "\nOriginal invoice information" );
System.out.printf( "Part number: %s\n", invoice2.getPartNumber() );
System.out.printf( "Description: %s\n",
invoice2.getPartDescription() );
System.out.printf( "Quantity: %d\n", invoice2.getQuantity() );
System.out.printf( "Price: %.2f\n", invoice2.getPricePerItem() );
System.out.printf( "Invoice amount: %.2f\n",
invoice2.getInvoiceAmount() );
// change invoice2's data
invoice2.setQuantity( 3 );
invoice2.setPricePerItem( 9.49 );
// display invoice2 with new data
System.out.println( "\nUpdated invoice information" );
System.out.printf( "Part number: %s\n", invoice2.getPartNumber() );
System.out.printf( "Description: %s\n",
invoice2.getPartDescription() );
System.out.printf( "Quantity: %d\n", invoice2.getQuantity() );
System.out.printf( "Price: %.2f\n", invoice2.getPricePerItem() );
System.out.printf( "Invoice amount: %.2f\n",
invoice2.getInvoiceAmount() );
} // end main
} // end class InvoiceTest

Change this (check my comments):
for (int i=0; <=2; i++) // what is <=2?? check the fixed version
total+=array.getPaymentAmount(); //two things 1) this needs to be inside the for-loop 2) you need to tell the array which index to look at
system.out.println("The Total retail value is: %.2f\n") //no need for \n because println does it automagically
}to this:
for(int i=0; i<array.length; i++) {
    total += array.getPaymentAmount();
System.out.println("The total retail value is: " + total); //if you need another blank line like above be my guest
Honestly, I didn't look past this part so fix this and post again if something is still broken.

Having a problem with Actionscript. Need help

I'm trying to set up the first page in my project so that I capture a person name... and I can use it again later on. I had discussed this in a previous thread with Ned Murphy:
http://forums.adobe.com/message/3319540#3319540
I half way have this working. For some reason when I type in the name, only parts of it appear when I retrieve it.
Here's a look at my actionscript on the first page:
stop();
//Setting Up Name TextInput Field and Variable
var userInput:String="";
//Enter Button Setup
enter_btn.addEventListener(MouseEvent.CLICK, copyText);
function copyText(e:MouseEvent):void
         userInput=name_ti.text;
           gotoAndPlay(2);
And here's the actionscript on the retrieval page
//Textbox Greeting
greeting_txt.text="Hello "+userInput+(!);
Where am I going wrong?

Have you tried embedding the font of your input text area? If you're using Flash CS5 Pro this is very important.

Im having massive issues with my email... I cant receive emails for my work email... was working perfectly and now just wont connect, i assume that I need to use my home wifi as the outgoing server?? Please help :)

Im having massive issues with my email... I cant receive emails for my work email... was working perfectly and now just wont connect, i assume that I need to use my home wifi as the outgoing server?? Please help

For your work email, do you use a well known server or do you use their own server? Their server IMAP and SMTP addresses might of changed or you entered them in wrong. It might be something with your router but unless you blocked every incoming connection, then it should work. I would talk to your tech guys at work to see if it is on their end.
Hope this helped a bit, Sean

Hello' I am having an issue with my iPhone 5 display. 2 days before i've noticed some horizontal and vertical lines on the display. Minor but noticeable. Specially in dark wallpapers and on full brightness. Is it normal?? Please Help!!!

Hello' I am having an issue with my iPhone 5 display. 2 days before i've noticed some horizontal and vertical lines on the display. Minor but noticeable. Specially in dark wallpapers and on full brightness. Is it normal?? Is this a software bug or Hardware problem?? Please Help!!!

Hello,
No, it is not normal. Follow this article:
http://support.apple.com/kb/ht1414
If this doesnt solve the issue your iPhone will need service.
Burcu

I am having major issues with links in keynote! Even though the links (a navigation system) are on the master page, they are only working on some of my slides. Anyone have ideas on how to fix this or similar issues? Help!

I am having major issues with links in keynote! Even though the links (a navigation system) are on the master page, they are only working on some of my slides. Anyone have ideas on how to fix this or similar issues? Help!
I have created a navigation system on the master pages and set the presentation to links only mode. I also have other links scattered throughout the program, like a linkable table of contents, etc. Some of them work, some of them don't. Not sure why. Anyone out there having similar issues? Or have any idea on how I can solve this issue? Any help would be appreciated!
Thanks!

Links should not create any problems in Keynote. If they are set up correctly on text, the text will be underlined. Objects that have links will have a curved arrow bottom right, if you click the arrow a popup will display the link information.
Try this repair for Keynote, ensure you complete all the tasks and in the order shown:
1
delete all the iWork applications if you have them, not just Keynote, using Appcleaner from Mac Update, its a freeware application
2
empty the trash: Finder > Empty Trash
3
Shut down your Mac, wait 30 seconds, then power on the Mac, immediately after the start chime, hold down the Shift key
When you see the grey Apple symbol and progress indicator (a spinning gear), release the Shift key.
If you are prompted to log in, type your password, then hold down the Shift key again as you click Log in.
4
Let the Mac fully boot up, it will take longer as the OS is repairing the drive
5
when fully booted, go to Applications > Utilities > Disc Utility; click on the boot drive then First Aid tab and click repair disc permissions
6
when complete, restart the Mac normally, Apple menu > Restart
7
install Keynote from the Mac App Store
let us know if this helped

Having Major Issues with Flash Player

Using IE 8, 64 bit, flash player 11.4.402.287
Having major issue with flash player! can not play a lot of games on FB. Games tell me that i need to update my Flash Player, PC says I have the latest version installed already.Ok, thought i would uninstall/reinstall...no go. Will not uninstall, says I need to close IE...which none are open. This issue has been going on for weeks now. I have done everything the help said to do and still not working. I need HELP!

im using the recent adobe flash player
windows XP, internet explorer, 10.045.2, 32bit
im not sure how this works, but im sure all that is correct:)
if you need additional infomation, just let me know

Major Issues with iPod Touch - Please help!

Hi, I am having major issues with my iPod, and nothing seems to be going right. It all started a few days after I got it for Christmas. I would wake up, and my iPod would be completely discharged even though it had a full battery and was turned off. I woke up one night and found that it came on all by myself. I sent it into iPod, and they sent it back saying nothing was wrong. Since I got it back today and within six hours, I have had four software crashes to the point where I have had to uninstall iTunes and restore factory settings four times. I am now on my fifth crash, but this time, the screen won't even come on. It keeps saying that it is in recovery mode. I simply went to turn it on! Does anyone have any suggestions? Personally, I think there is a short, and that I need a new a replacement. However, it doesn't seem like Apple is very supportive of the idea. I go through all of their steps over and over and over, and the same thing happens! What is going on? Please help.
Marie

sounds like, for the charging problem anyways, that you are just putting ipod into "Stand by" mode... press and hold the power key for about 10 seconds and an option to power off will actually come on.. if u just press it and let go, it just goes to stand by.. i have noticed stand by drains my battery
also, it doesn't sound like a short to me... the charging i am pretty sure is bc you are only putting it into standby however, the rest sounds like software.. did u try and restore using itunes or did you just reset the factory defaults?? Plug it into itunes and click restore under the ipod menu...
Message was edited by: Devin Stephens
Message was edited by: Devin Stephens

Having an issue with GoLive - I need help!?!

Similar Messages

Maybe you are looking for