Having attachment instead of using the body (email)

Hi Gurus,
I am having a problem regarding the email. I am using the FM SO_NEW_DOCUMENT_ATT_SEND_API1.
Instead of putting the data to the body of the email, it is creating a file named MESSAGE1.PDF and putting the data inside the attached file.
Anyone knows why this is happening?
This is the sample code.
wa_objpack-doc_type = c_raw.
APPEND wa_objpack TO it_objpack.
Only the doc_type has value.
Thanks in advance.
Benedict

Hi All,
Thanks for the response.
Actually, the requirement I should attach an attachment.
The problem is, there is another attachement that is being sent. And the data is the same with the expected attachment file.
Example.
Message1.dat
Filenam.dat
Message1.dat has the same data compared with Filename.dat. But I am expecting only the Filename.dat to appear. So there is an extra Message1.dat file attached.
I have checked the int table of pack. Only the doc_type has value = 'RAW'. Nothing else.
Thanks in advance.
Benedict.

Similar Messages

I use the apple email in my mac air. When I foward messages, people that use Outlook receive the text in form of attachment instead of the message opened in the body of the email. How can I solve this?

I use the apple email in my mac air. When I foward messages, people that use Outlook receive the text fowarded in form of attachment instead of the message opened in the body of the email. How can I solve this? Thanks. Best regards.

this:
Did not exist at the point of delivery to the consumer.
Nor did the white corrosive agent present exist at the point of sale.
" exposure of copper alloys to moisture or salt spray will cause the formation of blue or green salts called verdigris. The presence of verdigris indicates active corrosion."
I see also 2 contact points with DEEP corrosion pitting not indicative of any defect from the factory.

How do you make a photo an attachment and not in the body of the email

How do you attach a photo as an attachment and not in the body of the email?

If you attached the photo using the attach icon or attach command, it will act as an attachment on the recipient's end, even though you see it in Mail in the body of your message. If you drag and dropped your photo into your email, it will act as a placed graphic in the body of your message.

Can you set up a new I Tunes account, but still use the same email address, as having problems with it keep telling me it has been disabled, no matter what I do to chnage the passwords, I haven't used the account since 2010?

can you set up a new I Tunes account, but still use the same email address, as having problems with it keep telling me it has been disabled, no matter what I do to change the passwords, I haven't used the account since 2010?

Hi eddinchina,
You should have no need to use the Old Sync account.
As long as device or devices are Firefox 29 or later (They should all be Firefox 30 now) you should use the New Sync.
You may use the same email address with both accounts.

Is it possible to have list of subscribers so I can send bulk email to them instead of using the notification pane?

Hi Guys,
Is it possible to have list of subscribers to my magazine so I can send bulk email to them instead of using the push notification medium.
I await your prompt feedback.
Regards.

Hi,
I think there are two options for this. Unfortunately, neither option will gather details for every user.
Have your own Direct Entitlement server and control your user base yourself. In this case, you will have all user data and can extract their email addresses and send them email directly.
When a user buys an iTunes Subscription, they are prompted to “Allow publisher to see you personal data?” (or a similar phrase). In your Apple iTunes Connect there is a report that returns details on all subs who have pressed the “Allow” button. These user details include the users email address.
Thanks,
David

HT1694 Is there a way to have emails sent to both your ipad and desktop and then be able to delete them off of your ipad while having them stay on the computer? Two people use the same email account.

My parents use the same email address and both want to access all the emails that come in. My mom uses the ipad and my dad using the desktop. Recently the ipad started deleting emails off of the desktop when you deleted them off the ipad. Is there a way to get the messages deleted from the ipad to stay in the inbox on the desktop? Thanks!

Yes, that would require a POP type email account. What you describe now is the proper functioning of an IMAP type email account.
Contact your email provider to see if they can help.

How can I send photos in mail as attachments instead of in the body of the message?

I want to send photos as attachments to email instead of in the body of the message. I have searched through preferenced in both mail and iPhoto but can find nothing that lets me do this.

1. As Rysz says, Mail does send them as attachments. If seeing the preview is problematic for you, then right click on it in the Mail Message window and select 'Show as Icon'.
2. If you're worried about how they are received... Mail defaults to sending RTF email. A few older applications on other OSes have problems with these. A lot of users on other OSes can't figure out how to set their Mail applications to work with them. If that's the problem, use Plain Text as Larry says.

HT1918 How does one organise the apple ID so that one uses the same email address to have an account on both the UL and Belgian itunes stores?

I have in the past created an Apple ID for use with the UK itunes store, because I want to read in English. If I sign in it seems that this ID will only allow me to purchase from the UK store. But I live in Belgium, so I can't download from the UK store. So I tried to create an apple ID for the Belgian itunes store. But I want to use the same email address as I used for the first apple ID I made (because I'm fed up of having to remember which email address I used for which account). When I tried this, I just get a message saying that the email address is already in use for another account (which I know, because it's me who made that account). Does anyone have a workaround for this?
cheers
Andrew

I have tried again using the same password. and it still doesn't work.
I'm presuming you went ahead and set up a new Apple ID, yes? Using the same password in more than one Apple ID has worked for me in the past, but I haven't tried it in a while so the tightened security may have changed that. You could use the same password but add "-UK" and "-BE", or something like that, to make it easier to remember.
I understand what you mean about losing the ability to deal with UK purchased stuff, but this is becoming so inconvenient that I do want to delete that UK apple ID account. I have looked everywhere I can think of on the apple website (apple id, itunes, support etc) and I can't find a link/eplanation/contact point that deals with deleting apple ID and itune store accounts. Surely this must be possible?
It's possible, but Apple is very reluctant to do it, and it's not something a user can do on their own. It would be better to just stop using the UK account rather than trying to get it deleted. Just remove your payment information and there should be little reason to have the account deleted. If you really want to try, though, you'll need to send a message to iTunes support specifying that you want the account cancelled.
On a completely different matter, I have bought my son an ipod touch. But since he is younger than 13 years old, how does one go about using the itunes store to get music onto his ipod touch?
You would need to buy tracks for him; he's too young to have his own iTunes Store account. To control what gets synched to his iPod, this should help:
http://support.apple.com/kb/HT1495
Regards.

Cannot attach multiple photos using the ' Message ' option iOS 5.0.1 in ' Photos ' app.

Since i have updated my iPhone 4 to iOS 5.0.1 i cannot attach multiple photos using the ' Message ' option in the ' Photos ' app.
i browse my photos and then select ' Message ' on a photo. i am then able to attach the first image to the message.
When i then select the Camera icon on the created message to add another image , either ' Choose existing ' or ' Take Photo or Video ' , it does nothing and takes you back to your existing message.
I am able to attach multiple images when accessing the iMessage app it is just from the Photos app it is occuring
is anyone else having the same issue ?

You can submit the feedback to Apple here:
http://www.apple.com/feedback

I got a message that my passcode has expired. I never had this happen before. It asks me to enter it instead of using the keypad. Is this a valid request? or is somebody phishing?

I got a message that my passcode has expired. I never had this happen before. It asks me to enter it instead of using the keypad. Is this a valid request? or is somebody phishing?

If this is an email it is a scam and you should ignore it.

I cannot send emails with pics using the stock email app on my new Droid Turbo, it holds them in the Outbox and won't send even if I move to Inbox and resend

I cannot send emails with pics using the stock email app on my new Droid Turbo, it holds them in the Outbox and won't send even if I move to Inbox and resend

First check to make sure you have data turned on and not just Wi-Fi. From reading your question you seem to be saying e mail is working just not attached photos. What size are the photos as some HD photos can't be sent. Your camera may be set at a very high picture size and you can go to settings and lower the size and that may solve your mailing problem.

Using the correct email address when forwarding/replying to an email I sent out earlier...

I have several email accounts. A very familiar scenario is that I send an email with some tasks in it to a bunch of people. After some time has elapsed, I send a chaser, reminding people about a needed response. Normally, I would open the email I had sent earlier and press reply all, and I was done in seconds.
I think from the time Mountain Lion was introduced, it does not work like this any more, what it does is that it changes the sending email to the default instead of using the account from which it was originally sent, creating huge confusion with the receivers as well as revealing my other email IDs to them.
It is exactly the same when I press 'forward' on an email I had sent out earlier. Same problem.
All my setting are CORRECT, I think this is a system bug and needs to be fixed.
However, if someone else has found a solution, can you please help me with this?

Resolved with the add-on "Folder Account 6.0"
Mike

Setting the 'Return-Path' of emails sent using the send email behaviour

Hi,
How do I set the 'Return-Path' of emails sent using the send email behaviour? I am having troubles because the emails sent from my page are being filtered out as spam when they should be coming through. the text is the following (it is the notification of an e-card to the recipient):
Dear Bart
We've decided this year to share our holiday greetings while also showing our commitment to protect the planet. Since it takes 24 mature trees to
produce one ton of greeting cards, this e-card shares our holiday wishes with both you and future generations.
Please follow the link below.
Best Wishes,
John
http://www.jdgcsfiles.com/_ecards/viewcard.php?ID_cnt=297
I suspect that it has something to do with the return path setting.
Can anyone help me on this one and get it through the spam filters of most email clients?!
Thanks,
NIk

Hi Nik,
so far the only "flagged as spam" reason I know of is, that ADDT curreently misses to insert the current date/time -- please try the fix mentioned in the thread http://www.adobeforums.com/webx/.3c034953/5 and see if it helps
Cheers,
Günter Schenk
Adobe Community Expert, Dreamweaver

Instead of using the make file can you build nirlpk.sys using MS WDK 8.0 on VS2012?

After downloading the NI nimhddk_windowsWDM-2 and -1
Instead of using the make file I built nirlpk.sys using MS WDK 8.0 on VS2012
I copied the source files out of the dir /nirlpk to the MS template for WDM drivers
It built after turning warnings as errors off.
After uninstalling the NI_DMX driver I tried to install the RLP driver that consisted of nirlp.inf and nirlpk.sys
I got this message:
Windows found driver software for your device but encounted and error while attempting to install it.
PCI-6602 RLP WDM
Driver is not intended for this platform
Is the nirlp.inf file correct for loading on Windows 7 64 bit?
Any ideas?

I have now altered the example along lines
suggested by ghaneman*, who pointed out that
a trusted application did not need to use the
FileOpenService/FileContents just to get an
InputStream.
* Mentioned on 'File associations / sandboxed app.'
http://forum.java.sun.com/thread.jspa?threadID=785224
The altered code is..
/** Load a file into the editing area.
@param path A string representing the path to the desired file. */
public void loadFile(String path) {
    // first try as if this were a trusted application..
    if (!path.equals(".")) {
        try {
            FileInputStream inputStream = new
                FileInputStream(path);
            loadFile(inputStream);
        } catch (Exception e) {
            // we do not have trust, use the FileOpenService
            loadFileByFileService(path);
    } else {
        // we only have a directory, use the FileOpenService
        loadFileByFileService(path);
public void loadFileByFileService(String path) {
    try {
        if (fileOpenService==null) {
            fileOpenService = (FileOpenService)ServiceManager.
                lookup("javax.jnlp.FileOpenService");
        fileContents = fileOpenService.openFileDialog(path, xtns);
        // the user may have cancelled the action..
        if (fileContents!=null) {
            loadFile( fileContents.getInputStream() );
    } catch(UnavailableServiceException use) {
        use.printStackTrace();
    } catch(IOException ioe) {
        ioe.printStackTrace();
}If the user launches the trusted version, and
selects 'always trust' for the (self signed)
certificate, the end user can thereafter double
click a file and see it appear in the application's
editing area with no further user interaction.

I used the wrong email account when setting up ios8 iCloud drive, how can I change it on my iphone5?

I used the wrong email account while setting up iCloud drive during the upgrade to ios8, how can I change it on my iphone5?

See the iCloud account FAQ:Creating an iCloud account: Frequently Asked Questions for info on managing the account towards the bottom of the FAQ.

Having attachment instead of using the body (email)

Similar Messages

Maybe you are looking for