Having audio problems with Chrome
Like many, I'm having issues with the newest Flash update. Specifically, the sound is just about all but cut out in the left speaker and quite distorted in the right. I've used different programs and audio devices and it all comes back to the flash player. I've tried just about everything suggested to fix this but still nothing.
Here's a screenshot of the plugins configuration in Chrome:
I've tried enabling and disabling each one of them to no avail. Using the bottom one exclusively with fix the sound a bit but then the video is choppy and a lot slower.
Any help would be greatly appreciated.
Thanks,
Dave
Hi,
Sorry to hear you are having audio diffiulties. If you could please log a bug in the adobe bug base this will give us a way to start the investigation on your specific issue.
https://bugbase.adobe.com/index.cfm
If you could please be sure to include a URL which clearly demonstrates your issue. Also, please include OS, OS version, as well as Browser and Browser version. Any info you can provide about your sound card and sound card driver version will also be very useful. The following FAQ page provides instructions on how to gather audio and video display information for you specific OS.
http://helpx.adobe.com/flash-player/kb/video-playback-issues.html
Also, if you could please post back here with a link to the bug I will take a look directly.
Thanks,
Greg
Similar Messages
-
Hello all, I'm having audio problems with my FiOS set top box. When I start to change channels I lose audio and can't get it back unless I turn the TV off/on or I change the HDMI source on my TV . Seems after changing a couple of channels the problem happens. I've tried the in home agent auto correct, and different HDMI cables. I have a Westinghouse TV and I'll try a firmware update for the TV and see if that fixes it. Any fix for this and the possibility that it might be the set top box ? I just got FiOS and all is going well besides this issue. Seems that the other STB that are model # 335 aren't having this problem.
Some TVs have had issues with the HDMI handshake and the Audio. You may be required to use the separate bulkier HD Component cables with separate audio cables. Or try it as a solution on that TV.
I have CHS 435 DVR on a Samsung, and 2 CHS 335s on different model Vizio TVs, all with HDMI, and no issues. Others have reported different issues. I did a search here with the following results. Perhaps this information will help.
http://forums.verizon.com/t5/forums/searchpage/tab/message?filter=location&location=forum-board%3AFi... -
I am having a problem with Windows Fusion installed on a MacBook.
I am having a problem with Windows Fusion installed on a MacBook OS 10. When attempting to use a Browser, (either IE, or Chrome), under Windows Fusion, I cannot browse to ANY page except Gmail.com.
I checked all security settings, and found no problem. Neither browser will allow me to do ANYTHING other than go to Gmail.com!!!
I am not sure if I have some virus on my Windows side, because Google and Safari both work perfectly on my Apple side, just not when running Windows Fusion.
Is there some setting I am missing, or do you think I have malware/virus issues?? My Internet connection is DEFINITELY working fine - I can send, receive, open, and close all my email on Gmail only, and can navigate freely on Gmail, but cannot get to any other site even hyperlinked to Gmail.
Any help would be greatly appreciated.
Thank you very much.HartEJ wrote:
...Neither browser will allow me to do ANYTHING other than go to Gmail.com!!!...
If you've already tried my previous suggestions, it may be that something has tampered with the DNS settings in your Windows VM, which might bypass the settings your Mac uses. Assuming you're using Windows 8, these instructions explain how to check and change the DNS settings. There's also a link in those instructions listing a variety of suggested DNS settings. If you do try changing the settings, record what the settings currently are in case you want to return to them. -
Hello,having a problem with Logic 9 on a Mac Pro.Working on a lenghty song and apparently session got corrupted.Doesnt let me export tracks,program crashes.Already tried start brand new session with the tracks imported into it but still wont export.Suggestions?
Thanks, Ian. Yeah, that's how I do it now...or with the controls in the left side pane. Still, I would have liked that quick on-the-spot edit capability...especially while sketching.
Ian Turner wrote:
Sorry Mark, you are out of luck as it does not do that - it works the same as L8. The way I would achieve that with more accuracy and control would be to route all the tracks you want to fade to a Bus then use volume automation on the bus. To do this you will need to add a standard audio track, then re-assign it using (Control Click on the track header) to the Bus track. You can then automate volume/plugins etc on the Bus track.
Ian -
Synching audio problem with MPEG-4 video in QuickTime
Hello,
I’m having a problem with MPEG-4 video file I created with TechSmith Camtasia (6.0.1).
Problem: The audio does not sync up with the video when played with Apple QuickTime 7.6 (latest build) in Windows Vista. The longer the video plays the more out of sync the audio is. Here's where it gets interesting:
When I play the file using Adobe Media Player or Adobe Flash Player (plug-in in Internet Explorer), the video and audio sync up and all is good.
Is there a problem with how Quicktime decompresses this type of file?
Does anyone have any idea what is happening?
Thanks,
LeoIf I remember well, N70 plays mp4 video without problems. Try resizing during encoding to 176 x 144 and reducing frame rate to 15 frames per second. Also try to keep data rate below 200 kb/s. If you are using MediaCoder do not go with default settings for Nokia N70, they are too optimistic.
Here is link to document titled Creating Mobile Videos
http://www.forum.nokia.com/info/sw.nokia.com/id/b0c449c1-8e67-4c60-bd50-18a2b4f1e09b/Creating_Mobile...
Hope it helps.
www.2010-solutions.co.za -
hi! i'm having a problem with my safari as unnecessary new tabs keeps opening overtime i open some link! is anyone experiencing something like this !
There is no need to download anything to solve this problem.
You may have installed one or more of the common types of ad-injection malware. Follow the instructions on this Apple Support page to remove it. It's been reported that some variants of the "VSearch" malware block access to the page. If that happens, start in safe mode by holding down the shift key at the startup chime, then try again.
Back up all data before making any changes.
One of the steps in the article is to remove malicious Safari extensions. Do the equivalent in the Chrome and Firefox browsers, if you use either of those. If Safari crashes on launch, skip that step and come back to it after you've done everything else.
If you don't find any of the files or extensions listed, or if removing them doesn't stop the ad injection, ask for further instructions.
Make sure you don't repeat the mistake that led you to install the malware. It may have come from an Internet cesspit such as "Softonic" or "CNET Download." Never visit either of those sites again. You might also have downloaded it from an ad in a page on some other site. The ad would probably have included a large green button labeled "Download" or "Download Now" in white letters. The button is designed to confuse people who intend to download something else on the same page. If you ever download a file that isn't obviously what you expected, delete it immediately.
Malware is also found on websites that traffic in pirated content such as video. If you, or anyone else who uses the computer, visit such sites and follow prompts to install software, you can expect more of the same, and worse, to follow. Never install any software that you downloaded from a bittorrent, or that was downloaded by someone else from an unknown source.
In the Security & Privacy pane of System Preferences, select the General tab. The radio button marked Anywhere should not be selected. If it is, click the lock icon to unlock the settings, then select one of the other buttons. After that, don't ignore a warning that you are about to run or install an application from an unknown developer.
Still in System Preferences, open the App Store or Software Update pane and check the box marked
Install system data files and security updates (OS X 10.10 or later)
or
Download updates automatically (OS X 10.9 or earlier)
if it's not already checked. -
USB audio problems with 2013 iMac
I'm having a strange audio problem with USB microphones and headsets. The issue with my Logitech H650e is shown in this screencast I recorded. In the first part of the screencast, I am not speaking into the mic—yet you can see the levels fluctuating as if there is static playing (not in a natural pattern that you'd see when someone is speaking). In the next part of the video I demonstrate that selecting the built-in iMac mic for input, and then re-selecting the Logitech headset temporarily solves the problem. You can see the input start to fluctuate normally as it should when I am speaking. But at 0:31 in the screencast, you can see the input levels freeze and stop registering anything. I continued to speak until the end of the screencast, but no input was detected. For this screencast, I was on a Go To Webinar call, but the problem occurs regardless of whether I'm using Skype, Go To Webinar, GarageBand or any other software.
The problem with my Blue Yeti USB microphone is also different. In that case, the input does not freeze as it does with the Logitech headset. The levels appear as you would expect, and it seems to work. However, the person on the other end can hear static in the background, even though I don't hear it in my own headphones. I learned this because I just tried to do a Skype interview with the Blue Yeti, and the interviewer told me they could hear static. We closed Skype and called each other back twice, but the problem persisted. Then, suspecting the problem was related to what I described above with the Logitech, I unplugged the Yeti and then plugged it into my Macbook Air 2013 (also running Mavericks). Lo and behold the static completely disappeared.
My Griffin iMic and Audio Technica lavalier mic (attached to the iMic) behaves similarly to the Yeti, except in this case I can hear the static when I speak with my monitoring headphones. The input works but I get a lot of cracking and static in the background. This was confirmed by calling the Skype Test Call number and recording a message, which is then played back.
Here are the facts:
All 3 of my USB audio microphones/headsets do not work with my 2013 iMac running Mavericks
All 3 of these microphones/headsets worked fine with my 2008 Mac Pro running Mountain Lion
All 3 of these microphones/headsets work fine with my 2013 Macbook Air running Mavericks
In this other thread, several people are reporting similar issues with the iMac 2013 and Mavericks. At least two people did not have the issue when the iMac 2013 was running Mountain Lion. This of course suggests the issue is the combination of the iMac 2013 and Mavericks.Apple>About This Mac>More Info>Service
Please read the warranty paperwork that came w/your computer.
You have 14 days to return the computer w/no questions asked.
You have 90 days of FREE phone tech support on top of your standard 1 year warranty unless you also purchased AppleCare which gives you an additional 2 years of coverage plus FREE phone support.
Strongly suggest that you take FULL advantage of the above before it runs out. Let Apple deal w/the problems. -
Having a problem with eBooks in my iTunes library.
As the title says, I'm having some problems with the iTunes library not reflecting what's actually on the disk.
I add the ebook and it seems to add ok. The file gets consolidated into /mymusic/books under the author correctly, but the book is missing from the library. The book is in ePub format, and seems to have the right file extension and shows up as a file of "ePub" type in windows explorer.
Any ideas? Is there a way to re-build the library or a portion of it?Hi tony paine,
Welcome to the Support Communities!
The article below may be able to help you with this.
Click on the link to see more details and screenshots.
iCloud: Keeping the Junk folder consistent between iCloud Mail and OS X Mail
http://support.apple.com/kb/HT4911
Cheers,
- Judy -
I notice that my new IPad (3rd generation) will not stay connected to the power cord at all, I'm not exagerating, if I plug it in and browse the Internet without fail it will become unplugged and I will have to push the plug back in (Ba-beep). Ive actually grown to despise that sound when you plug your iPhone or iPad in because it reminds me of how much money I spent on something that PHYSICALLY will not charge while I'm using it.
I know the problem with it holding a charge while in use, I get it, the screen is amazing and it takes a lot to run the display, however, it is unacceptable to me that I can't even keep the thing plugged in while I'm using it. I can not even leave it on my Cal King bed overnight because I will wake up in the morning to find that the plug has been jiggled loose in a corner, so it's still attached but not making a connection thus not being charged.
I love the 4GLTE from Verizon and I love the iPad, but I'm actually using my 1st generation IPad while I am at home so I can leave my new $900 iPad on a table to charge free of incident so I can use the 4G while I'm away from wifi during the day. I have been getting more upset about this because I can not even use the Griffin extended cord to charge the iPad and be far from the plug because only the original apple sync/charge cord will have a better shot at staying in. Absolutely none of my non apple cables will stay in the iPad 3 while having it in my hands.
The plug is at an angle, unlike the first iPad, not sure about the iPad 2. Please let me know if they have same issue.
If anyone else is having this problem with the Gen 3 iPad please let me know because I'm tempted to do something about it with apple and I'm hoping that I just for some reason have a bad cable receiver or something and maybe I can get a replacement and enjoy the iPad as I had expected to. There is no reason why I should be even using my first iPad and I have friends that want to buy it but I am not selling it because I'm unable to sell it because I can't handle the new iPad while it's plugged in, that is ridiculous if it's a common issue so please let me know!Thanks for the swift reply, I have been looking online and a loose plug seems to be somewhat of an issue with many, I hope mine is actually a problem and not what others are experiencing. It's taken me this long to even reach out for the simple fact I HATE being a complainer but this is just horrible.
Do you have an iPad 3 as well? And is yours not experiencing any issues close to mine?
Thanks again! -
I have upgraded Apple Aperture from version 2 to version 3 and I'm having a problem with the "Highlights and Shadows" adjustment. According to the user's manual, I should have access to an advanced disclosure triangle which would allow me to adjust mid contrast, colour, radius, high tonal width and low tonal width.
If anyone has any suggestions as to how to access this advanced section, I'd be most grateful.Hi David-
The advanced adjustments in the Highlights & Shadows tool were combined into the "Mid Contrast" slider in Aperture 3.3 and later. If you have any images in your library that were processed in a version of Aperture before 3.3, there will be an Upgrade button in the Highlights & Shadows tool in the upper right, and the controls you asked about under the Advanced section. Clicking the Upgrade button will re-render the photo using the new version of Highlights & Shadows, and the Advanced section will be replaced with the new Mid Contrast slider. With the new version from 3.3 you probably don't need the Advanced slider, but if you want to use the older version you can download it from this page:
http://www.apertureexpert.com/tips/2012/6/12/reclaim-the-legacy-highlights-shado ws-adjustment-in-aperture.html -
I have an imac and am using iphoto. Currently I am having a problem with one particular album which shows in the main part of the window a triangle with an exclamation point. The two photos are at the bottom of the main window in the same area where the "info" "edit" "create" area is. I can see the two photos but I can not get them back into the main part of the window. I can't drag them anywhere either. I can't double click or right click on either of the two photos either. All I can do is click on either one and they get a little bigger. Before I saw the exclamation point in the main body of the window all I get is two squares with nothing in them and the entire border is made up of dashes. Can someone help me?
Make a temporary, backup copy of your library if you don't already have one (Control-click on the library and select Duplicate from the contextual menu) and apply the two fixes below in order as needed:
Fix #1
Launch iPhoto with the Command+Option keys held down and rebuild the library.
Screenshot is for iPhoto 9
Since only one option can be run at a time start with Option #3, followed by #4 and then #1 as needed.
Fix #2
Using iPhoto Library Manager to Rebuild Your iPhoto Library
1 - download iPhoto Library Manager and launch.
2 - click on the Add Library button, navigate to your Home/Pictures folder and select your iPhoto Library folder.
3 - Now that the library is listed in the left hand pane of iPLM, click on your library and go to the File ➙ Rebuild Library menu option.
4 - In the next window name the new library and select the location you want it to be placed.
5 - Click on the Create button.
Note: This creates a new library based on the LIbraryData.xml file in the library and will recover Events, Albums, keywords, titles and comments. However, books, calendars, cards and slideshows will be lost. The original library will be left untouched for further attempts at fixing the problem or in case the rebuilt library is not satisfactory. -
Hello sorry but im having a problem with my apple id it appears that i cant download nothing i dont know why but when im going to download something example facebook it appears de app that is charging and then desapere how can i fix that?
Hi there,
I would recommend taking a look at the troubleshooting steps found in the article below.
FaceTime, Game Center, Messages: Troubleshooting sign in issues
http://support.apple.com/kb/TS3970
-Griff W. -
I just upgraded my iMac to Lion, and a few seconds ago, I upgraded the iWork package and now I'm having some problems with the new version of Pages (4.1) When I try to change something in a document, a message says "the program is not responding", so I have to force it to close. By the way, the SAVE botton stays the same even I change erverything in my document. Please, a have a work to finish, **** me. What I can do abou it?
I just upgraded my iMac to Lion, and a few seconds ago, I upgraded the iWork package and now I'm having some problems with the new version of Pages (4.1) When I try to change something in a document, a message says "the program is not responding", so I have to force it to close. By the way, the SAVE botton stays the same even I change erverything in my document. Please, a have a work to finish, **** me. What I can do abou it?
-
having a problem with dates when I send my numbers doc to excel. dates are all out and that they have to cut and paste individual entries onto their spreadsheet. Any idea how I can prevent this.
I'm using Lion on an MBP and Numbers is the latest versionMay you give more details about what is wrong with your dates ?
M…oSoft products aren't allowed on my machines but I use LibreOffice which is a clone of Office.
When I export from Numbers to Excel and open the result with LibreOffice, the dates are correctly treated.
To be precise, dates after 01/01/1904 are correctly treated. dates before 01/01/1904 are exported as strings but, as it's flagged during the export process, it's not surprising.
Yvan KOENIG (VALLAURIS, France) mardi 3 janvier 2012
iMac 21”5, i7, 2.8 GHz, 12 Gbytes, 1 Tbytes, mac OS X 10.6.8 and 10.7.2
My iDisk is : http://public.me.com/koenigyvan
Please : Search for questions similar to your own before submitting them to the community
For iWork's applications dedicated to iOS, go to :
https://discussions.apple.com/community/app_store/iwork_for_ios -
Having a problem with my ipad... I tried to install ios and the ipad has frozen
I am having a problem with my Ipad air. tried to install ios and my ipad has frozen
Click here and follow the instructions.
(124611)
Maybe you are looking for
-
Hi, I have a table control. How to get the index of the row selected in the table control? Please help. Very urgent Thanks
-
HI All, I am trying to upload the trial balance with Web ADI.Its working firn for 4 records but for 2000 records, its not uploading and even not showing any error msg.Its just terminating the loader. Can somebody help ????? Thanks in advance Abhishek
-
W32time source showing as Local CMOS clock
I have 3 virtual servers, all on different hosts, which are currently showing the wrong time. All other machines on the Domain get their time from the Domain Controller. I have only been making changes on 1 server to ensure that this works. Originall
-
What is command to bring back the standby database to primary database?
what is command to bring back the standby database to primary database? Please reply soon....
-
Why can't I see an option for ethernet in System Properties?
My wife has just got a new MacBook Pro from work. The wi-fi is working fine, but the ethernet is not. There isn't even an option for it in System Properties. Any thoughts? Is it just a setting that's wrong or do I need to send it back?