Having both PC Settings and Control Panel is unnecessary redundancy.

Hi!
I keep getting into the Windows 8 type of PC Settings. And honestly, the PC settings is really lacking highly in substance. It is also very confusing to have both PC settings and control panel. Why not only use the control panel? It is waaaaaaay way more
polished than the PC settings.
I feel like this is a bad decision.

Agreed. It's completely redundant and should be consolidated to one view. Preferably the control panel view. Dont try and fix what isn't broken.

Similar Messages

What is the differences between PC Settings and Control Panel in Windows 8 and later

Background:
      I made a windows driver. I need to let the settings of it can be searched in 2 places:
               1.Search box of the Control Panel page
               2.Search box[Settings] when press the [Win] + W Keys.
      Now the 1st place has been supported, but did not find out the method for 2nd place.
      About Windows Search I just find out the search guide for file systems, does anyone know how to support the 2nd Search box[Settings].

What region are you in? I heard that there are no separate student and education versions anymore.
If it actually says "Education edition" somewhere then I'm guessing 1 of 2 things:
1. "Education Edition" is just another name or title for "Student + Teacher Edition"
or
2. The "Education Edition" is the volume licence equivalent of the Student + Teacher Edition (which is a single licence for personal use on one computer only).
Don't take my word for it though. I'm new to all of this (looking to buy my first Adobe software products)
I'm in Australia and I can only buy Student + Teacher Edition (no Education Edition).
Did you receive a physical CD copy of the suite?

Screen orientation locked despite correct settings in control panel and side switch

Screen orientation locked despite correct settings in control panel and side switch

Make sure this logo do not appear on top right of screen.

How and where can I get intel hd 4000 graphics drivers and controll panel to 3d settings ... I want to turn off my vertical sync! please someone has to help me with this problem!

How and where can I get intel hd 4000 graphics drivers and controll panel to 3d settings ... I want to turn off my vertical sync! please someone has to help me with this problem!

So are there any other ways to get there, or to change options there?
And is it plausible to use 3d vision (like nvidia its one) but than without an nvidia graphics card. for watching movie's and gaming etc.
Thank you!

Req to send my audio drivers and control panel

hello,my audio drivers and control panel were lost due to the attack of trojans.I'm unable to select my required drivers and control panel,because an error report is occuring and is closing the opened window.so i request you to please send me the suitable audio drivers and control panel.my laptop is presario c555nr model.please send them as soon as posible.
This question was solved.
View Solution.

http://h20180.www2.hp.com/apps/Lookup?h_lang=en&h_cc=us&cc=us&h_page=hpcom&lang=en&h_client=S-A-R163...
Are any of these yours ??
You may also try to restore your machine to a point before the trojan attack with Microsoft System restore.
Go to start > all programs > accessories > system tool > system restore.
If the trojan corrupted your system to the point where you can't fix it, then you may have to reload your OS using your HP recovery manager. Save all your personal info. before you do this, as it will be deleted.

Notifications and control panel do not work on either the app screen or home screen

On my home screen and in apps, I can not swipe up or down to release the notifications or control panel. It has worked earlier today, however not any more.
I can, however, access them in the lock screen, andin settings, they are allows to open in apps. It should always allow me to access them in the home screen though, so I do not know what has happened.
What do I have to do to access the control panel in the home screen, and why is it like this?

Do you have a screen protector or case that would interfere with swiping?
If so remove them as a test.
Otherwise:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: Back up and restore your iOS device with iCloud or iTunes
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar

Palettes, toolbar, and control panel don't work in CS3?

I can't select pages from the "Pages Palette" or add or delete pages from the same palette. All of the palettes are having similar issues (i.e. Pages, Info, Layers, Links, Stroke, Swatches, Object Styles, Color, Effects, Gradient, Character Character Styles, Paragraph, Paragraph Styles, etc.) They are just unusable. Most of the toolbar work except for the selection tool which I can only activate by pressing (V). The control panel seems to be having the same issue. I've tried reinstalling and repairing the install on the entire CS3 package. I've tried reinstalling and repairing the install on just InDesign. Photoshop CS3, Acrobat, and Illustrator work fine....not sure about Dreamweaver, Flash, and the others.I've downloaded and installed all available updates for CS3 from Adobe's site.
Any thoughts?
Running on:
Windows Vista Home Premium 32-bit
Service Pack 2
Processor: Intel(R) Core(TM)2 CPU T7200 @ 2.00Hz
2.00 GB RAM

See InDesign tools and panels don't respond to mouse clicks (Windows 7/Vista)

Reboot laptop back to factory settings using control panel

can someone please tell me how to get my compouter back to factory settings using the control panel. i think i may have downloaded somthing thats making my laptop messed up and i dont have a clue on what to do. help please!

Click Start , All Programs , Recovery Manager .
Or,just do it from boot. Immediately after powering on the laptop start tapping away at the F11 key.This should boot into Recovery Manager where you can choose to do a Factory reset.
******Clicking the Thumbs-Up button is a way to say -Thanks!.******
**Click Accept as Solution on a Reply that solves your issue to help others**

I cant open Flash Player settings from control panel on Windows 8

Yo
I play an online game that uses flash... I usualy play off of Chrome or an app launcher called pokki
the game has been glitching for me lately, i was told by a fellow player that someone put a hack into my computer through this game, infecting a .DLL file associated with Flash player
it doesnt seem to have any effects on the flash player , but has created lots of bugs in game
Also, I cant seem to be able to open the settings for Flash Player through my control panel in the start menu
I click on Flash Player, and nothing loads....If i click on anything else in the control panel, it opens...everything but the flash player..
Ive ran Malware Anti-Malware program and also Ccleaner......cleared all the files that popped up...
But still cant access my flash player settings...I tried uninstalling Flash and reinstalling....still nothing
Can anyone helpe me out?

Can you try to open it from a web page; e.g. http://helpx.adobe.com/flash-player/kb/find-version-flash-player.html - right-click on the Flash animation and select Global Settings.

Rogue Processes and Control Panel

I have rogue processes implemented but I need the users to be able to
access a couple things in the control panel. They click on the Display
icon in the control panel and it of course give them the rogue error
for rundll32.exe. I've added rundll32.exe to the exception list, but
it still does not work. Any ideas?
jv
johnnyv5

johnnyv5,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Do a search of our knowledgebase at http://support.novell.com/search/kb_index.jsp
- Check all of the other support tools and options available at
http://support.novell.com.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://support.novell.com/forums)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://support.novell.com/forums/faq_general.html
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://support.novell.com/forums/

UAC And Control Panel information

Publishing from InMarket to Intel's AppUp is definiately causing quite a few problems. Attached are images of UAC when installing and uninstalling our app from AppUp - it incorrectly identifies the publisher. When installed, it doesn't report a version in the control panel. It also doesn't allow Adobe's browserapi SWF to launch the app - all of these things are creating a load of issues for us when it comes to our end users.
We just got off a call with Intel talking about the browserapi problem and another issue we're experiecing where a user has AIR 2.0 installed but our app requires 2.5 and AppUp doesn't prompt to upgrade so it fails and we get a bad rating from that user. They say they don't even officially support AIR 2.5 in AppUp. This is crazy

Damon,
can you, by any chance get the real icon files from the installed apps as they are used on the desktop and send them in an email to me.
This is hard to compare because one appears to be from a netbook running Windows (Vista?) then the other screen shot appears to be from an OSX installation or a desktop version.
Are you sure it is not the OS and the desktop shell that picks the icons and renders it?
The text on the top one is wrapped so the way shortcuts are pictured appears to have some space contraints.
Have you tried to change the way desktop icons are displayed?
Right-click the desktop, point to View, and then click Large Icons, Medium Icons, or Classic Icons. (Classic icons are the smallest size.)
When you have selected Classsic only the very small icon files are used
Let me know if that works
Joerg

IE 11 zoom default 125% based on display settings in control panel.

Using Windows 7 Enterprise with 2 displays I have my display settings set to increase windows objects and text by 125%. IE 11 appears to compound this by defaulting to 125% zoom on startup default. If I set the display
control back to 100 the default on IE goes back to 100% as well. How do I get IE to default to 100 when the display is set for 125% Based on another post I checked IE ZoomFactor in the current user key and found it to be the recommended 100000.
and ResetTextSizeOnStartup and ZoomOnStartup are set to 1. Changes to these does not seem to have an effect.

Hi，
I test the issue and have the same result as yours, the value of ZoomFactor remains 100000. As a workaround, I change the value to Decimal:80000 (or Hexadecimal: 13880) then F5 to refresh the registry, reopen IE, it goes back to 100%, my registry setting
as below
[HKEY_CURRENT_USER\Software\Microsoft\Internet Explorer\Zoom]
"ZoomDisabled"=dword:00000000
"ResetTextSizeOnStartup"=dword:00000000
"ResetTextSizeOnZoom"=dword:00000001
"ResetZoomOnStartup"=dword:00000001
"ResetZoomOnStartup2"=dword:00000000
"ZoomFactor"=dword:00013880
Yolanda Zhu
TechNet Community Support

Using a control as both an indicator and control

Hello,
I have been search and reading for a few hours now and have finally decided to post. I fear I am not using the correct terms because I am fairly new at LabView.
I currently trying to build a user interface that uses 9 different tabs [I am using the same tab structure as in the labview example code]. There is a set of variables that will need to be on 3 of these tabs in similar form. These variables include:
2 boolean controls
1 boolean indicator
1 string indicator
12 numeric indicators
I would like to have all of these values be the same on the separate tabs at the same time.
For example if I press one of the boolean controls, that same boolean control should now be activated on the other tabs as well.
If it would be possible, please do point me in the right direction of how to go about doing this. (Also the proper terminology)
Many Thanks,
Buffalo960

tbob wrote:
I don't think you can have the same instance of controls and indicators on separate tabs. Two options:
1. Create separate controls on each tab. Put code such that if any control or indicator in the list is changed on any tab, the other similar ones get changed programatically. You can do this with an event structure and local variables or property nodes. Lots of programming.
I don't think that it will be a lot of programming. For example: if he has 5 controls and want to keep all of them synchronized, with only one Case of the Event Structure he can do the job, setting the 5 controls to trigger that Case when "Value Change" and use the Event Node "NewVal" to write the same value for all controls (including the control that triggered the event, but with a code this size it will not be a big deal to write the information a again to the same control).
Thanks
Dan07
Attachments:
Multiple Controls.vi ‏39 KB

My Starter has (1GB usable) despite 4GB acknowledged by BIOS and Control Panel

I have a 110-4250NR with Windows 7 Starter. My new RAM is Crucial, meeting all the specs. To me, the hardware and software both recognize the 4GB, but Windows will only use 1GB. Am I missing something here? In other machines, Windows would use the maximum amount per OS, even when excess capacity is installed. HP support was not helpfull.
FRIW, I may upgrade to Premium, which addresses the 4 GQ,
Thanks

Hi,
Windows 7 recognizes memory upto 2 GB only. I'd recommenfor a windows upgrade.
Good luck!
Hit kudos if I helped.

Having both 802.11g and 802.11n devices on a new dual-band AEBS

Although I don't own a dual-band AEBS yet, I'm thinking I might be in the market for one. I just moved into a new apartment complex where the 2.4GHz frequency is saturated with over 30 wireless networks in range of my unit. I'm thinking that the 5GHz frequency would be much less crowded, and am thus considering getting a dual-band AEBS.
I have the following equipment on my home network:
1 Power Mac G5 (uses wired ethernet)
2 MacBooks (use 802.11n)
1 iPhone (uses 802.11g)
1 PlayStation 3 (uses 802.11g)
My question is (and I keep finding conflicting information on this topic) will the iPhone and the PS3 slow down the MacBooks from 802.11n speed to 802.11g speed when they are connected to the dual-band AEBS? If so, can this be avoided by running 2 routers with two separate SSIDs (one in 802.11n only mode, and the other in 802.11g only mode)?
Sorry if this is a repeat question, but the fine print on Apple's product page says that the dual-band AEBS will be slowed down when a 802.11g device joins, but I have heard people say otherwise elsewhere.
Thanks.

So with the new dual-band AEBS, it is possible to create two different SSIDs (one 5GHz 802.11n and one 2.4GHz 802.11g) and have those two networks seamlessly joined for file/printer sharing as well as both run at their maximum speeds.
To the best of my knowledge, being that I just got one a few days ago and haven't "experimented" fully yet, I believe the answer is yes to all counts. I'm sure if others have had the opportunity to check out all of the features that this new model has to offer, they will certainly chime in.

Having both PC Settings and Control Panel is unnecessary redundancy.

Similar Messages

Maybe you are looking for