Having continuous issues with my iMac, all I want to do is perform a clean install... at my wit's end. Help please. :(
I apologize in advice if this story is discombobulated or more information is needed to provide me with an answer. I will do my best to provide as much details as possible, but this is a problem that has been occuring for the past few weeks and some things I've forgotten the specifics of.
I will start by explaining that my iMac specs are:
Processor 3.06 GHz Intel Core 2 Duo
Memory 4 GB 1067 MHz DDR3
Version 10.6.8
I've owned this iMac since about April of 2010. I've never had any problems with it until recently. At one point in time, I had a Boot Camp partition made in order to install Windows, as I wanted to run some games that weren't available to Mac users. After awhile, I eventually bought a Windows Laptop for my gaming needs. When this happened, I decided to erase previously stated Boot Camp partition in order to free up more space on my hard drive.
After a few months, had major issues involving a trojan virus on my laptop, it destroyed my hard drive, and I wasn't able to buy a new one at that time. Recently decided to try and create a new Boot Camp partition to reinstall Windows. When I attempted that, (I apologize, I don't remember the specific error) it wouldn't allow me, and from what I remember after doing some google research, it sounded like somehow my hard drive had become disorganized, and needed to somehow be reorganized.
At some point in my google research I found that using the Repair function in Disk Utilities would possibly help. When I tried that, (the only reason I know this is because I tried just now to get the error to pop up) I'm given a message "This disk needs to be repaired. Start up your computer with another disk (such as your Mac OS X installation disc), and then use Disk Utility to repair this disk.
So here I'm thinking, "okay! No big deal! I have the disk still, I will just back up my hard drive to an external hard drive". So I buy an external HDD, back up everything I need. I then put the disk in, and my optical drive spends some time thinking, then spits it back out. It does this repeatedly. I do some more google research, find that optical drives crapping out on mac users isn't all that uncommon. I try to clean it with a trick someone suggested. I then tilted my iMac to one side, it accepts a cd! I try it again, and I'm no longer able to trick my iMac into reading disks. Sad face.
Instead of hefting large sums of cash at Apple to replace my optical drive, I buy a far more affordable external cd/dvd drive that is working perfectly fine. So after waiting for that to be delivered, 3 days later, I'm excited to finally get a clean install with my OS X drive. At this point, I care little about repairing, and have decided to just completely clean install. I restart my iMac, boot from disk, and I get the spinny thing for about 20 minutes. I think, "hmm... should it take this long?" So I reboot and try again. Same thing. I then let it run overnight, and wake up to spinny thing. When my Mac is on, it reads the dvd just fine. It just won't boot from it and let me start the clean install.
So then I get the idea maybe I can do a remote install of the disk from my friend's macbook. No such luck, won't seem to recognize anything. Then I see that I can make a copy of the disk image to my computer, and burn that image to a partition made on my external HDD, so that I can boot from that. Well, the only info I could find was a gentleman burning a downloaded version of OSX Lion, but I figured, "hey, its the same thing, right?" I guess not. I tried copying the image using the restore function in Disk Utilities, and it does indeed show up when I hold Option at start up, but booting from it does not start up properly. It starts up like any normal time I restart. I'm thinking its cause the way I copied it didn't involve a .dmg file.
So I try to copy the image to a file on my computer, but when I do that, I get some sort of input/output error.
What can I do at this point? I thought I originally set up Time Machine but when I checked recently, no such luck. All I want is a fresh reboot of my Mac. I'm guessing somehow my hard drive became corrupted in some way. I mean, it truly doesn't seem to be affecting anything, except somehow even after deleting all known movie, music, game, etc. files, I still am using up 270 gb of space. Maybe I never un-did the Boot Camp partition properly and kinda screwed myself on this one.
I've tried just about everything. I never invested in Apple Care, but even had I done so, I think it would have exceeded the warranty, as I had thought it was 2 years. I could be wrong, either way, its water under the bridge now. I need to fix this myself. I'd still like to use my iMac for general use, and to utilize the 1 TB of storage it possesses.
Any help is greatly appreciated, sorry for the wall of text, its been a complicated few weeks. Thanks!
Whew... never buy an iMac or Laptop from Apple without the 3 year extended AppleCare... well 2 years extended... & I think they should be called on this, they should come with a 5 year Warranty, with more available if you want.
I think, "hmm... should it take this long?"
No way, Houston, we haave a problem, not sure what... RAM, Logic Board, etcd.
Tough without the Install disc, but some things to try...
Does it boot to Single User Mode, CMD+s keys at bootup, if so try...
/sbin/fsck -fy
Repeat until it shows no errors fixed.
(Space between fsck AND -fy important).
Resolve startup issues and perform disk maintenance with Disk Utility and fsck...
http://docs.info.apple.com/article.html?artnum=106214
Report outcome please.
Similar Messages
-
The apps stop working, usually when during the syn process, and the computers ends up crashing altogether. Sometimes not even the 'force quit' will do the trick, so I end up forcibly shutting down the computer.
Can anyone helpLozanoPuche wrote:
Yes, I have an anti virus called Avast.
That is probably where the problem is, following the developers instructions remove the app from your system. Anti-virus apps in general tend to create more issues than they solve.Fortunately the best method to protect your system from any malware is by keeping your system up-to-date. Once successfuly removed then restart in Safe Mode (Google it) and then restart normally and re-test. -
I am having the issue with my iMac lab. Units will go to sleep and when a student tries to use the unit there is no response from keyboard but mouse will respond. They need to be restarted to resolve the issue but should it go to sleep again we start the process all over. I have 17 in this lab and have been sending them in for repair two at a time. They replaced the DC/SATA cable on the first two and it resolved nothing. Resetting PRAM and PMU also did not correct the issue.
Any ideas? Hardware? Software?I have a computer lab with 25 with the same problem. I found this happened after they keyboard update. Has anyone really solved this problem with the keyboards not responding after the computers go to sleep? We have to restart several every day, every hour. What is apple doing with this?
-
I am having an issue with my adobe acrobat 9 pro. Every time I try to open a pdf from someone it opens it up with my free adobe reader rather than the Acrobat 9 pro so then I don't have all of the functions of 9 pro. How do I get it to open with 9 pro instead of the free reader?
It may depend on the plugin that is loaded into your browser. However, right click on a PDF and select the Open With option and go to the default button to select Acrobat as the default. That might do it.
-
I am having some issues with email. My iphone shows 4 emails as unread yet when I look thru all my emails, both on my iPhone5 and my outlook there are no unread emails. How do I clear this up on my phone?
Email does not and has never synced between the iPhone and the computer. It sounds like you may have had your PC set up to use POP3 for e-mail, which will download e-mail from the server and delete it, causing it to vanish from your phone if the phone was set up for IMAP. IMAP provides full synchronization between the server and clients. What you delete on one will vanish from the others. This is the preferred method of managing e-mail as it prevents e-mail from being downloaded, for example, on a PC and making it inaccessible on your phone.
-
Having sound issues with Mid 2011 iMac 27"
Having sound issues with Mid 2011 iMac 27". It has 10.10.2 OS X. Could this the issue and if so how do I revert to 10.7.3
It is almost impossible to diagnose sounds over the internet, however here is a link to some failing HD sounds. If one of yours be happy, at any rate take it in for service. If you got AppleCare or it's less than a year old it's covered.
Failing hard drive sounds -
Anyone else having an issue with TCP connections using iCloud for Windows?
Hi,
Before I asked this question, I did wait to see if any related questions came up, but none did, so I submit it now.
On my admittedly older laptop running Windows 7 64b Home, I've run into difficulties with the iCloud for Windows app to the extent that I had to uninstall it.
It would that, as my laptop was running, in the background, iCloudServices.exe would endlessly iterate TCP connections, which, while not actively sending or receiving any data, after some hours would number over 100 instances, taking up resources, and grinding my laptop's WiFi connection to a grindingly slow pace. I ended up, within the app, turning off everything, iCloud Drive and Photos, (I never used bookmarks), but still this would continue to occur.
I contacted Apple Support, explaining what was going on, and they stated they only dealt with IOS and gave me a Microsoft Support number. When I called Microsoft support, I came more and more to the realization that the issue was specifically with the iCloud for Windows app, as that was the only software that was endlessly creating and not closing TCP connections as it was. How was Microsoft supposed to solve an issue with Apple code?
So I called Apple back, whereupon they insisted it was a Microsoft issue. I explained other cloud services installed on the same computer were not having the same issue, it was unique to ICloudServices.exe. They stated they only dealt with IOS. I stated I purchased an iPad Air less than 7 months ago, and was trying to run iCloud in support of that. They again stated they only dealt with IOS, and suggested I again try Microsoft. I asked them if it was reasonable to expect Microsoft to solve issues with Apple code? They said regardless, there was zero support offered for anything having to do with Windows, and all I could do was uninstall the app, which I did, though that did not feel very satisfactory to me. My thinking is, if Apple writes a Windows app in support of their hardware, they should offer support for it.
Anyway, I was just wondering, is this an issue unique to me? or have others experienced a similar issue? I found this issue by opening the Windows Resource Monitor, looking under the Networking tab, and scrolling through the TCP Connections section to find 100+ concurrent iCloudServices.exe instances listed, whereas even Chrome, with multiple tabs and extensions, topped out at around 20.
My one month old Desktop, DYI, sports a solid Asus 1150 MoBo, i7-4790k cpu, 16GB Ram, and an EVGA GTX 970 video card. I list some specs only to illustrate this computer has no hardware issues in comparison to my long in tooth laptop. On this desktop, running Win 8.1 Pro 64b, at least as many, identifiably Apple, background service TCP connections are created even compared to Chrome, regardless of many tabs being open, many extensions, and even some related apps. Adobe does not even come close, though I run the full CC subscription. On this new computer, running Windows 8.1 Pro 64b, there are currently over 50 TCP connections and loopbacks that do not identify themselves, with just a - for the Image, and PID. With the experience on my laptop, I wonder how many of these are generated by Apple software, if not specifically iCloud software?
The frustrating aspect of these connections is they seem in no way active, While the Chrome and Adobe connections can be seen to be transferring data, as long as I am not running iTunes, or so have my iPad actually plugged in, it seems 99% of the time these iCloudServices.exe connections are just taking up ports, neither sending nor receiving any data discernable to me under the Processes with Network Activity, or Network Activity lists, both displayed in the same window as the TCP Connections in the Windows Resource Monitor.
Though I am fairly ignorant as regards coding, it seems as if there is no call to close a connection, very specifically, iCloudServices.exe, when it is no longer needed, and the next time a connection is needed, a new one is opened, rather than accessing the one previously opened. The only other reason I could imagine this might be occurring is if my Norton Internet Security software might mask and/or block the port after a certain time of inactivity.
Anyone out there have any ideas or advice about this? Thanks in advance.Thanks jared,
I'm still dealing with this issue through Apple. Some time after I posted this, I contacted Apple again. They did start a case up for me, as I was experiencing the same behavior on two different machines, with two different versions of Windows.
So far it remains unsolved. I've logged iClouds for Windows on my desktop, which is brand new, then logged for awhile after completely uninstalling Norton Security Suite, depending on the Microsoft security for some time, and finally logged after I uninstalled iCloud for Windows, restarted, installed a clean download, and connected using a completely different test account, which Apple set up for me. None of this made any difference. Looking at the logs, it seems every 10 minutes, iCloudServices.exe creates a new TCP connection to confirm I'm using less than 5GB on iCloud, (which I am by a good margin, using less than 2GB), it seems this connection is not closed, and when the next iteration rolls around 10 minutes later, a new TCP connection is created. I come very close to having 6 TCP connections created per hour, until I restart my computer. This works out to... 6 x 24 = 144/day.
Perhaps the article you posted will shed some further light on this. I'm thinking seeing the state of the connection through netstats, at the least, could help.
For the last week, I've been putting a hold on further logging, as Apple wants me to create a new user account on one of my computers, install iCloud for Windows there, and log it running in the other account. This however basically means I cannot use my computer for a fair number of hours, and I've been busy enough with work the past week that I haven't the time or energy to afford to set this up and run it. I've had need of my computers too much for the past week. -
I think I am having shutter issues with my 5D mark iii. image is vignetting on top of frame.
I think I am having shutter issues with my 5D mark iii. image is vignetting on top of frame. ( left side when shooting portrait).
does not happen all the time. shoot 20 frames, not a problem then will happen 4 or 5 in a row or every other shot for a few shots.
Studio situation with 4 lights but it is not a light issue. subject is dark also. all lights fire at full. happens weather at 1/100 or down to 1/20. these 4 examples were shot at 1/50 f 10 iso 100. raw converted to jpeg. shooting teathered but I dont think that matters. has anyone else had shutter issues? can any one from canon give me any info or help??It may be that the flash is firing as the shutter is opening... but if you're having an issue with a sticking shutter, the shutter isn't completely open when the flash fires.
If this is the case then it wouldn't matter how long the shutter is open because the flash doesn't provide light continuously when the shutter is open... it only gives a burst. That momentary burst is normally fired at the moment the shutter finishes opening up completely (but if the shutter is sticky and isn't completely finished opening when the flash fires... you'd have a dark edge.)
If you used 2nd curtain shutter so that it doesn't fire until the moment before the shutter is intended to close, you shouldn't see vignetting even if the shutter is sticking.
But this makes me wonder what the shutter count is on your body and if it needs service.
Tim Campbell
5D II, 5D III, 60Da -
I am having an issue with a USB flash drive.
Hello, I am having an issue with a USB flash drive. I have a 2012 iMac OS X 10.9. Drive keeps on disconnecting after about 30 seconds. I tried to reformat through Disk Utility but doesn't allow me to verify or repair as it disconnects. This same drive works fine on Windows machines. I tried all USB ports but all give the same issue. Message is: "Disk Not Ejected Properly. Eject "No Name" before disconnecting or turning off." When I attempt to copy data from the disk it comes up with the message: "The Finder can't complete the operation because some data in "" can't be read or written (Error code -36)". I believe the solution for this error is to format the drive but as mentioned this function doesn't work. I need to copy data from a Windows machine to my iMac. Any suggestions with this is appreciated. Thanks!
I went back to a Windows machine, formatted it to NTFS (so lost the data but had a backup), recopied the data. Went back to the Mac but same issue happened after I tried copying the data "Disk Not Ejected Properly - Eject " " before disconnecting or turning off." One of the USB ports didn't detect the 32GB flash drive at all. And disconnected on another one.
-
Boot Rom/BIOS emulation issue with latest iMacs?
Hi,
Firstly thanks for viewing.
We've just bought 34 new iMac's and previously had (and still have) 60 odd Aluminum iMac's dual booting OS X/Windows which have no problems.
The new iMacs though seem to be having huge issues with booting Window's the first 2 attempts wether using Apple's Startup Manager or rEFIt.
The first attempt the machine will just hang after at a grey screen after volume selection and the second attempt you will receive a "Disk Read Error" and the third attempt the machine will boot normally and this behavior is happening on all of the brand new 34 iMac's.
rEFIt produces the following error:
Error: Not found return from legacy loader;
Error: not found from locatedevicepath;
Error: not found from locatedevicepath;
Error: load error while (re)opening our installation volume;
Which leads me to believe the issue lies with Apple's Boot Rom and the hand over between EFI and BIOS emulation.
I have tried multiple installs of OS X Snow Leopard with 32 bit XP, 32 bit Vista and & 32 bit Windows 7 as well as using Bootcamp 3.1 which really only add's driver support for Windows 7 no Boot Rom updates.
If anyone is having similar issue's I'd love to hear and any work arounds you may have.
Thanks for taking the time to read my post.
Dave MaltbyHi Sea Dog,
Thanks for your reply . But I cannot find anything related to my problem in the link you attached (or it’s “sublinks”). One sublink is about an annoying usb3 bug with some problem related to the S3 sleep state. (Maybe this is the one you are referring to?) But I do not have this problem, I can wake my PC from the S3 sleep state via my connected USB devices. The problem I have is that I also start my PC after a shutdown (=S5 state I assume) via my connected USB devices, which I do not want to happen since too easy to start the PC accidently for example by just moving the mouse a little bit. As I write above, I think this is caused by MSI:s choice to configure their BIOS regarding “Resume from S3/S4/S5 by USB Device”. If I am right about the cause to my problem, I guess MSI should have chosen this resume option without the "…S4/S5…" or at least without the "S5" (By the way, I seem to have version C2 of the Z87 chipset if I understand a note correct on the MB box.)
Again, am I correct about my idea to the cause of this problem?? Can someone please advise how to solve it if possible?? -
Hi. I am having an issue with music on my IPod. It would probably be easier to explain my specific issue: I have songs by Band of Horses from Cease to Begin. When viewing my albums through cover flow, it shows Cease To Begin as two separate albums, one with only Islands on the Coast, and the other having Islands on the Coast with 3 other songs. If I delete the album with only one song from my IPod, it deletes the song from the other "album" as well. If I go to "All Songs" by Band of Horses, it only shows one Islands on the Coast, so it is not a duplicate issue. Also, in Itunes, it only shows one album. I just recently updated to iOS5 on my 4th Gen IPod Touch, if that helps.
Hello APVzW, we absolutely want the best path to resolution. My apologies for multiple attempts of replacing the device. We'd like to verify the order information and see if we can locate the tracking number. Please send a direct message with the order number so we can dive deeper. Here's steps to send a direct message: http://vz.to/1b8XnPy We look forward to hearing from you soon.
WiltonA_VZW
VZW Support
Follow us on twitter @VZWSupport -
I am having a issue with getting data useage alerts for my iphone 4s
I am having a issue with getting data useage alerts for my iphone 4s from AT&T. I do not download anything huge at all.
I looked into it and figured out that the phone dials out nightly at 12:29am every night. I went into my settings and went to general..about..diagnostics and useage..then diagnostics and useage data to see this. I then clicked don't send...but I am still getting useage alerts. Can anyone help me please...
ThanksHonestly, from reading the thread linked, they all come off as a bunch of whiney people that cannot be bothered to help themselves.
Little to nothing in that thread indicates an issue beyond inept consumers. Yes, I read several pages on the incessant gripes. Very few made any actual attempts to troubleshoot issues before whining about the "Apple issue" and those that did actual troubleshooting got their issues resolved.
So no, Apple has nothing to fix beyond a few specific devices that are experiencing hardware issues.
If you have actually put forth effort and done the basic troubleshooting, take the device to Apple for evaluation and possible replacement. Whining will get nothing accomplished. -
I am having major issues with links in keynote! Even though the links (a navigation system) are on the master page, they are only working on some of my slides. Anyone have ideas on how to fix this or similar issues? Help!
I have created a navigation system on the master pages and set the presentation to links only mode. I also have other links scattered throughout the program, like a linkable table of contents, etc. Some of them work, some of them don't. Not sure why. Anyone out there having similar issues? Or have any idea on how I can solve this issue? Any help would be appreciated!
Thanks!Links should not create any problems in Keynote. If they are set up correctly on text, the text will be underlined. Objects that have links will have a curved arrow bottom right, if you click the arrow a popup will display the link information.
Try this repair for Keynote, ensure you complete all the tasks and in the order shown:
1
delete all the iWork applications if you have them, not just Keynote, using Appcleaner from Mac Update, its a freeware application
2
empty the trash: Finder > Empty Trash
3
Shut down your Mac, wait 30 seconds, then power on the Mac, immediately after the start chime, hold down the Shift key
When you see the grey Apple symbol and progress indicator (a spinning gear), release the Shift key.
If you are prompted to log in, type your password, then hold down the Shift key again as you click Log in.
4
Let the Mac fully boot up, it will take longer as the OS is repairing the drive
5
when fully booted, go to Applications > Utilities > Disc Utility; click on the boot drive then First Aid tab and click repair disc permissions
6
when complete, restart the Mac normally, Apple menu > Restart
7
install Keynote from the Mac App Store
let us know if this helped -
Hi, i am having an issue with a basic motion scroll effect.
I already watched and read every tutorial out there regarding this topic and even tried the adobe chat support, but the guy on the other end of the line disconnected me…, probably he didn't understand what i wanted from him because english is not my native language, so a will try to be very, very clear about this one..
please note, that i am new to muse, this is my first project ever.
my idea is as following:
when the customer comes to our companies site, he just sees our logo on a white Background. the logo consists of, say, four elements. when the customer scrolls down, the logo starts to disassamble: first the first part of the logo flies out the left side of the site, then the second part of the logo vanishes down, then the third part of the logo flies to the right, then the fourth part of the logo flies to the top and out of the customers view. given what i have seen, it is possible to do that….
so…..
now i have the four parts of my logo imported as png files into muse and assembled them in design view to build our companies logo. I select every one of the four parts and go into the scroll effects tab left beside the layers tab. first i enter the same values for every one of the four parts: initial motion: 0x and 0x again for the left and right motion; key position ( t-handle) : 0px; final motion: 0x and 0x again for the left and right value.
now i hit "preview".: the logo is "pinned" at the correct position, i can scroll but the logo stays where it is. so far so good….
now i select all the four elements again and go to the scroll effecs tab. at "final motion", i click the down arrows and enter 1x. I hit Preview…
when i am scrolling down the WHOLE logo goes down…. so far so good.
NOW i want the first part of the logo to go down, THEN the second part to go left, THEN the third part to go up, THEN the fourth part to go right.
so i select ONLY the first part, go to the scroll motion tab, at "final motion" i click the left arrows, then i enter 1x.( the up-down value, i set to 0 again).. i hit Preview…
the first part of the logo goes left as soon as i start scrolling, the other three parts still go down at the same time…
NOW i want the second part of the logo to start moving, when the first part has left the scene, not at the same time as the first part.
SO I SELECT THE SECOND PART AND DRAG ITS T-HANDLE (KEY POSITION) DOWN TO, LETS SAY, 200PX. SO IT STARTS MOVING ONLY AFTER THE CUSTOMER HAS REACHED THAT POINT, RIGHT?
BUT WHEN I PREVIEW THAT ****, THE LOGO IS NOT TOGETHER ANYMORE, THE SECOND PART IS FLOATING ANYWHERE ELSE BUT WHERE IT SHOULD BE…..WTFF????
short: when i move the t handle, the initial position of the object changes. thats what i said to the adobe employee, but he said, that thats the expected behavior….
but if thats so, how can i have my four parts correctly together, so they form my logo, but with different t handles, so that they all start to move at different times??
Pleeease help me, i am dying of frustration here…..:( that behavior cant be right, right?
Thanks so much to everyone who actually reads this post and tries to help…….
All the best,
Niki LapanThank you so much for helping,
But i really wonder how you did that. did you always switch between design view and preview view, then change the key position for 2px then switch back, to align the four letters? because i imagine that can get really frustrating, if you have a logo consisting of 58 parts instead of 4!:)
Anyway thank you very much for your time and effort!!!! -
Since updating my iPhone 4 to iOS 5.1 I'm having compatibility issues with my speakers / docking station and my iTunes wifi sync isn't working. Anyone else having the same problems? Both worked fine until the update...
Okay. I got it working again by setting it up as a new phone instead of just syncing. Then I backed up. All is good today.
Maybe you are looking for
-
Are there any free apps with the same app iPhoto?
Are there any free apps with the same app iPhoto?
-
Camera file naming convension filename modification
Hi, How do I change to photo's file naming convention? Each time I move my files to a centralised location, the filenames start from 001 again and now I have different photos with the same filename... STUPID!!!!
-
I cannot find the shape tool in element 12-thank you.
i cannot find trhe shape tool in elements 12
-
Security Update 2007-005 - Cannot find Server under Server Admin
After I installed Security Update 2007-005 all my machines began to have problems. I was able to get them all running except my server, it is a PowerMac G4 running Mac OSX Server 10.4.9. When I click on my server in Server Admin it acts as though the
-
Hi...i am having a very difficult time. I hadn't used my 2GB 1st Gen Nano in a while and it is requesting a 4 digit code. Is the code factory set? and how do I reset this nano?