Having data problems with ios6, seems to be a unique problem?

My little brother recently bought an iphone 4s and imediately upgraded to ios6. Since the phone has been in use (less than 30 days) the phone company (bell a canadian company) claims he has used up 17 Gigs of data but the iphone counter says he has only used 5 gigs. I realize the counter may not be totally accurate but that big of a difference seems a little crazy. I also have an iphone 4s with the ios 6 and my data usage that my phone counter displays matches what my phone company says almost perfect (a few mb difference). The data amounts come in large chunks on my brothers phone and at very odd times such as: 1456.28 mb at 4:04 am, or 4268.07mb in one session. He does not use his phone for streaming or anything like that, We are aware of what uses large amounts of data and what does not. he uses it for facebook twitter web browing etc.
When talking to tech support one guy said that we could have a "lemon" phone claiming that a known problem with ios6 can cause the data to somehow get "scrambled" and completely making up data usage numbers to send to the phone company. According to him this makes it an apple problem.
My main question is has anyone heard of this? If so I am looking for articles talking abut this problem, we are looking at $1000.00 in overage chrges and are preparing for a fight with the phone company.
The counter has never been reset and I know that I use my iphone 4s much more than my brother (I stream utube and radio stations alllll the time, goole maps etc) and have never once gone over my 6 gb limit. It just seems quite crazy to me that the difference in the iphone data collector (about 5 gb) and what the phone company has (17gb) is so great. To me that is indicating a serious problem. Any input would be greatly appreciated!
Thanks
Crystal

kleptul wrote:
I have upgraded from a SB Li've! to an SB Li've 24-bit, but I HAVE performed a complete format/clean install of WinXP SP2 to try to correct this problem. WinXP at first recognizes the card as a "Multimedia Audio Controller(the whole yellow "!" found in device manager). Upon installing either the drivers that came with the CD or the updated drivers from the website, the card works fine until I start the system up again, and I'm back at square one, having to install either set of drivers again(and rebooting) to have the card work properly once again. But after shutting down AGAIN... It's like I never installed the drivers in the first place. I'm running in a vicious circle here, like WinXP refuses to acknowledge the drivers permanently. I have formatted and reinstalled WinXP SP2 a total of three times now, to no avail. I'm a computer tech of 2 years and have NEVER seen a problem such as this. Each time the device manager comes up as "drivers for this device has not been installed". And from personal experiences/general knowledge, this does not sound like faulty hardware to me. It's THIS kind of instabilaty that makes me actually MISS dos! Um... help?
Hi
Sounds like your system don't recognize the sard (BIOS or OS).
Does your system recognize the card as a "Creative Li've! 24-bit" or something (is PnP functionality in use?) even it don't work? Is BIOS battery well?
Have you tried by installing Li've! in another PCI slot?
Is there some security settings set on XP, and are you installing with full admin rights? Can you find the driver files even when your card is not functioning?
Also, have you tried install drivers by executing the ctzapxx.exe found on installation package.
jutapaMessage Edited by jutapa on 0-06-2006 08:53 PM

Similar Messages

  • I downloaded IOS6 earlier today and my 4S has died twice, it has gone from 45 to 32% in the last 5 minutes and i have icloud, internet, all apps closed with nothing running at all!! There is a serious problem with ios6, my phone was hot at charging time.

    I downloaded IOS6 earlier today and my 4S has died twice, it has gone from 45 to 32% in the last 5 minutes and i have icloud, internet, all apps closed with nothing running at all!! There is a serious problem with ios6, my phone was working hot at chargering time. Apple need to address this asap!!!!

    Hi Suzy Q,
    I can send and receive calls.
    I get "messaging stopped" when doing a lot of texts.
    Texts come up "ghosted" meaning they have the text on the bottom and a transparent one overlaid  on top. they then become one. But I get the ghosting most of the time when I go into a message from a contact to send a text.
    When I go to call logs or text logs, the numbers come up first, and then then the names pop up randomly, meaning not in order down the page, until they are all shown. lots of lag time.
    It runs slow.
    I have 5 apps on here. I should be able to have a  lot of apps on here, and play music, and have files, and...and....and.
    I can get online but doing a Google search, when the page with the choices comes up, it is blurred and I have to tap on the screen for it to become clear and readable.
    When online and scrolling, it hitches sometimes/lags/gets stuck then unstuck
    I get VZWAVS has stopped. (not sure if those are the right letters)
    The status bar that is supposed to be gray with the new update, goes back and forth between green--the old os--to gray. And I have found no continuity with when I get green or when I get gray.
    I get a black screen on occasion.
    sometimes the proximity sensor doesn't work.
    sometimes when I have my bluetooth on and have "hands free mode" on, I get the a text message read through the headset and also through the handset.
    I soft reboot often--turn it off wait a bit and

  • Map problem with ios6

    I have problem with IOS6 Maps is any one knows to downgrade to old IOS5 Maps

    Load this map and save it on your Home Screen
    https://maps.google.com/

  • There is a problem with this connection's security certificate The remote computer cannot be authenticated due to problems with its security certificate. Security certificate problems might indicate an attempt to fool you or intercept any data you send

    Hi,
    I have this Windows 2008 R2 on which I installed remoteapp some years ago.
    Now the certificate expired and I get the message
    "There is a problem with this connection's security certificate
    The remote computer cannot be authenticated due to problems with its security certificate.
    Security certificate problems might indicate an attempt to fool you or intercept any data you send to the remote computer."
    How should I renew the certificate? I already went to certification store and tried to renew certificate with same key but then it says "the request contains nor certificate template information".
    Please advise.
    J.
    J.
    Jan Hoedt

    Does the computer account have Enroll permission to the certificate template?
    From the Server running your CA, run mmc, click File then Add/Remove Snap-in...
    Add Certificate Templates and click OK.
    Find the certificate template, then right click and select properties.  On my CA its call ed RemoteDesktopComputers but might be called something different depending on what what template your certificate is based on.
    On the security tab, click Oblect types, check Computers then OK. Enter the Computername and click OK.  Then give your computer account Enroll permisssion.
    HTH,
    JB

  • I have a problem with IOS6, theres no acces to wi-fi

    I have a problem with IOS6, theres no acces to wi-fi

    Isn't there any way to solve the problem. I have the same problem too. Without network, most procedures are unavailable.It's a real tragedy!

  • Im trying to download itunes 10.5 but keep getting error message that says: There is a problem with this Windows Installer package. A problem run as part of the setup did not finish as expected. Contact your support personnel or package vendor.

    im trying to download itunes 10.5 but keep getting error message that says: There is a problem with this Windows Installer package. A problem run as part of the setup did not finish as expected. Contact your support personnel or package vendor. I am using windows XP 32 bit, all the other computers in my house downloaded just fine, no problems, however this is the computer my iphone is set up to, ive tried doing a virus scan, windows update, downloading other things, updating everything possible, everything works fine, its just itunes that wont download, anyone have any other ideas?

    Yes, I had found a similar solution also.  I'm running XP Pro, SP3.  I went Control Panels/ Add-Remove programmes/apple software update/ change/ repair.  Then run the 10.5 exe.
    While the programme updated from version 8 of iTunes, my new iTunes is now a mess.  Not all of my music was in the same folder previously but it all showed up on iTunes.  Now many albums have been left out, some have only a few tracks and some have two copies of some tracks as well as having other tracks missing.  I haven't begun to work on that.

  • Hi. ITunes 11 dont install my pc.. Problem: "There is a problem with this windows installer package. A problem required for this install to complete could not be run. Contact your support personnel or package vendor."  Please help me.

    Hi. ITunes 11 dont install my pc.. Problem: "There is a problem with this windows installer package. A problem required for this install to complete could not be run. Contact your support personnel or package vendor."  Please help me.

    Repair your Apple software Update.
    Go to START/ALL PROGRAMS/Apple Software Update. If it offers you a newer version of Apple Software Update, do it but Deselect any other software offered at the same time. Once done, try another iTunes install
    If you don't find ASU in All programs, go to control panel/
    XP- add n remove Programs/highlight ASU, CHANGE then REPAIR.
    Vista or Win7 - Programs n features/highlight ASU and click REPAIR

  • Since I upgraded to 10.7.2 lion I have these problems with Time Capsule. What is the problem? thanks

    since I upgraded to 10.7.2 lion I have these problems with Time Capsule. What is the problem? thanks

    Unable to access disk image backup "/ Volumes / Time Capsule / iMac Admin. Sparsebundle" (error -1).
    Then?????

  • I have a problem with google safe browsing, I have a problem with google safe browsing

    I have a problem with google safe browsing, I have a problem with google safe browsing

    Hello mitjarak1,
    I would be be concerned too if I was not able to update my iPhone.  If you have not resolved the issue, I recommend following the steps in the article belowfor an issue like this:
    iOS: Unable to update or restore
    http://support.apple.com/kb/HT1808
    As always, it is a good idea to create a backup before hand:
    iOS: How to back up and restore your content
    http://support.apple.com/kb/HT1766
    Thank you for using Apple Support Communities.
    Best,
    Sheila M.

  • Problems with iOS6 not updating correctly

    I recentely upgraded my iPhone 4 with iOS6.  However several of the features seem to not have been installed/upgraded, such as Facebook which still has version 3.3.3   Is there something that I need to do in order to 'unlock' all the features?
    Some changes (minor) have taken effect, but several other features are still missing.
    I've tried uninstalling/installing Facebook but it always comes up with the same version 3.3.3
    Any ideas on what I should do?
    Thank you!

    Are you using any cleanup software like CCleaner that might cleanup the cache?
    Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance).
    *Do not click the Reset button on the Safe mode start window or otherwise make changes.
    *https://support.mozilla.org/kb/Safe+Mode
    *https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
    To avoid confusion:
    *http://kb.mozillazine.org/JavaScript_is_not_Java

  • Has anyone got these problems with iOS6 and Siri?

    Hi, yes, I'm another unhappy iPhone 4s user who made the mistake of upgrading to iOS6, (what a way to use my first post!!)
    However, I won't gripe about the very very poor maps (please Google, release an app!), but I have noticed these other 2 problems and wondered if anyone else had:
    1) After using Siri with my bluetooth headset to open some apps or do some work the phone automatically locks itself, which is very annoying when I can't handle my phone!  For example, my phone isn't locked, I used Siri to find out what tomorrow's weather will be like, it tells me  and then 3-5 seconds later the phone locks itself and I have to enter my unlock code.  Or, I opened my Sky Go app using voice control, which it did .............. before locking the phone a few seconds afterwards.  Arghhh!
    2) Sometimes the screen dims itself.  I have to lock the phone and unlock it and it reverts to its usual brightness.
    Also, I don't know if this has anything to do with iOS6 or just my usage, but the battery seems to be draining more.  I'll be keeping an eye on this to see if its down to me, my apps or my phone!!
    Am I the only one
    B

    I am right there with you! I have AT&T and have exchanged it etc...nothing seems to work. My iPH4 did not have these issues! Not sure what to do...besides try a new carrier.

  • TS2634 After I updated my iPod touch with iOS6, it does not work with my Logitech docking station. Is this a problem with iOS6?

    Does updating the 4th generation iPod touch with iOS6 keep it from working with a Logitech docking station/boombox? Nothing is wrong with the boombox.

    Try:
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset all settings
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:
    iOS: How to back up
    - Restore to factory settings/new iOS device.
    iOS: How to back up your data and set up as a new device
    If it still does not work that means that the update broke compatibility. That happens sometimes. You will have to wait for an update to either iPod's iOS or the dock's firmware.

  • Problem with HP pavillion dv7 giving message (a problem with the internal fan enter = shutdown

    HP Pavillion DV7 notebook PC
    Windows 7 64
    intel I5
    6 gig memory
    service pack 1
    I am trying to identify a problem with my HP Pavillion dv7 laptop
    Several months ago it started getting hot and showing messages about problems with the internal fan and battery. It would say enter = shutdown and shut off. I suspected a bad battery so I checked it without it just plugging it in with the power cable. It seemed to work better so I assumed that was the problem.
    I ordered a new battery and it worked for a while. The problem came back and is getting worse. I can run it without the battery for a while but it gets got and shows the same message.
    I read on here that flashing and updating the bios worked for some but the latest update gives me an error IHISI not support BIOS then Insyde flash not supported.
    any help would be great this PC has a lot of info on it and I dont think it is a lost cause
    thanks

    Hi duddy, sorry to hear that you are having issues with your computer over heating.  I have found a document that will assist you with Restoring the BIOS.  http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&dlc=en&docname=c02693833&lc=en&product=5199538&tmp...
    I have also found a document that will assist you with Troubleshooting and Overheating and Auto shutdown issue.    http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&dlc=en&docname=c03904182&lc=en&product=5199538&tmp...
    If you are still having issues, please let me know and I will be happy to offer more assistance..
    Thank you.
    Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    W a t e r b o y 71
    I work on behalf of HP

  • Problems with ViaVoice under Leopard, especially key mapping problems

    ViaVoice's behavior has changed considerably under Leopard. First I will discuss the key mapping problem, since I'm eagerly looking for an answer to this problem. At the end of this post, I will voice some of the other problems I've experienced for those who may be interested. The key mapping problem may be specific to the fact that I use a foreign keyboard with a US version of ViaVoice.
    INTRO:
    I have used ViaVoice on my Mac for years, more or less without problems (ViaVoice's bugginess is notorious).
    Those who know ViaVoice will know that one has two general options for dictation. One can dictate into ViaVoice's so-called SpeakPad, which allows special formatting, editing and dictation error correction within the dictated text, or one can dictate into "external" software such as Microsoft Word, in which case ViaVoice just sends a string of characters to that software. SpeakPad appears to make strong use of the operating system's built-in functionality for character formatting, document formatting, etc.
    *MY PROBLEM*
    I have a German keyboard on my PowerBook, yet dictate in US English. When I dictated into SpeakPad under Tiger, all characters appeared correctly. However, when I dictated into Microsoft Word using Tiger, I had to switch the keyboard mapping from German to US to get all characters (that means including the characters that are located at different positions on a German keyboard than they are on a US keyboard such as y, z, apostrophes and parentheses) to appear correctly.
    Under Leopard, things have changed. Now it doesn't matter whether I dictate into SpeakPad or Word; the results are the same and many characters do not appear correctly.
    If set to a German keyboard, y and z appear as expected. To name a few irregularities:
    "(" appears as ")"
    ")" appears as "="
    apostrophes appear as "#" and
    ";" appears as ","
    If set to a US keyboard, y and z are interchanged. "(" and ")" appear as expected. Apostrophes appear as "\" and ";" appears as ","
    By comparison, if typed (as opposed to dictated, as in the examples above) "correctly" (i.e. based on the letters printed on the keyboard) on a German keyboard set to imitate a US keyboard:
    y and z are interchanged
    apostrophes appear as "|"
    "(" appears as "*"
    ")" appears as "(" and
    ";" appears as the symbol for "less than"
    Since I don't have a US keyboard, I can't say how it would behave if set to imitate a German keyboard, i.e. if there's a correlation to the results I get when I dictate.
    Since I was previously able to dictate correctly into SpeakPad by setting the keyboard to "German" and into Word by setting the keyboard to "US," I presume that this is a problem in Leopard, not ViaVoice.
    *OTHER PROBLEMS WITH VIAVOICE UNDER LEOPARD*
    In addition to the aforementioned key mapping problems (that may be specific to those of us with foreign keyboards), ViaVoice appears to have lost considerable functionality in Leopard. I cannot access SpeakPad's Preferences and the correction window. Moreover, the traffic-light like window buttons have disappeared from the VoiceCenter (although they work if you click where they should be). SetupAssistent appears to function.
    I've written to Nuance about these problems, but have little hope that they will invest the time in producing a patch since they haven't released any updates since 2003.

    Thrums1,
    I've never had to "register" ViaVoice after updating the system. I thus suspect you haven't fully followed my above, three-step advice (particularly step 3).
    1) Reinstall ViaVoice from CD.
    2) Update to the latest version (using the patch downloadable from Nuance's website).
    3) Replace the “temp” and “users” folders (in the "ViaVoice" folder at the upper level of your home directory) by a previous copy thereof. When I say previous copy, I mean a copy from when ViaVoice was still working properly, e.g. a copy from when it was running under Tiger.
    As I said, I've gotten ViaVoice to survive several system updates by following the above steps. To my knowledge, the last step is critical since it saves you from having to reconfigure ViaVoice under the new operating system (in this case Leopard). I suspect that ViaVoice is crashing on your system because it's trying to start some module of the SetUpAssistant that is incompatible with Leopard (as many are). If you instead use old copies of the "temp" and "users" folders (from the previous system), then ViaVoice doesn't have to go through the initial "registration" process; ViaVoice doesn't need the SetUpAssistant; and all is (more or less) fine.
    Good luck!
    BTW, to my knowledge, Dictate only runs on Intel Macs. It thus won't run on a G4 iBook, just as it won't run on my PowerBook G4.

  • Siebel Problem With a Workflow Process (Pleaseee help REAL PROBLEM)

    Well the problem is this i have a designed a workflow who is called by a JOB. Its functionality is to close Service Requests at certain time in the night.
    when i simulate a workflow against 2 different Servers it works fine without errors, but when i run a job that calls this WP in those servers i have diferent errors in diferent steps.
    In one server i have this kind of error in the last step "Cerrar Requerimiento":
    SBL-EXL-00151
    SBL-SCR-00141
    SBL-BPR-00162
    This operation is not allowed when there are no records displayed.
    Please execute a query that returns at least one record or add a new record
    and in the other i have this error in the 3er step:
    SBL-SCR-00141- Problem Running a eScript
    in spanish:
    Error de tiempo de ejecuci?n de Siebel eScript en el procedimiento 'GetFieldValue' de BusComp [Action]:
    Error: SiebelError: Esta operaci?n no se permite cuando no hay registros mostrados. Ejecute una consulta que devuelva por lo menos un registro o agregue un nuevo registro.(SBL-DAT-00215)
    (SBL-SCR-00141)
    Error al invocar servicio 'BCH EAI Query Utility', m?todo 'UpdateRecord' en el paso 'Cerrar Actividades'.(SBL-BPR-00162)
    (error in the Runtime of the Siebel eScript in the process GetFieldValue of Action,This operation is not allowed when there are no records displayed.
    Please execute a query that returns at least one record or add a new record
    error invoking the service "BCH EAI Query Utility in the Method UpdateRecord in the step "Cerrar Actividades".
    If they have the same job and workflow, and BS's active(i use the BS in other workflows and no problem with it) why they give error in diferent steps but they work fine when i use the Business Simulator?, its there a solution?, this can be a problem about the server config or triggers??
    thanks a lot!

    Hi,
    1.Is you're server and youre client using the same version of SRF ?
    2.Is the version for workflow in server and the one youre testing in client are the same ?
    3. Last but not least this BCH EAI Query Utility search spec is it correct ? Can it able to return at least one record base on you're search spec because I know some business service are required to return at least one record else it will throw error.
    Thanks,
    Joey Tan , Malaysia

Maybe you are looking for

  • Blank screen after poweroff

    First of all, sorry for my language. I'm french (I've posted my problem on the french forum here but it hasn't been solved yet. THE PROBLEM : When I shutdown my desktop computer using any command ('shutdown -h now' 'halt' of using the syslinux powero

  • Because it appears that is already loaded iPod battery when it is not already

    hello friends my question is why my ipod touch it appears that you have already finished loading and itunes does not appear that this loading please help me.

  • Inherit Singleton class?

    hi there, We are learning Java at University and are supposed to develop a program to manage an art exhibition. The art exhibition is limited to 100 Objects (paintings and sculptures). Every object has a name, a value, an insurance, etc. and type spe

  • Why are the emails in my yahoo deleted file being erased on my iphone

    I have yahoo email and for the last month, or so, the emails in my deleted file (trash) are erasing on my iphone 3gs, even though the setting for deleted emails to be removed is NEVER. Why is this happening all of a sudden??? Could this be same reaso

  • QT file burnt onto DVD doesn't show when DVD reinserted into drive

    This has happened several times now, and is beginning to affect my work. Here's what happens: I create a self-contained QT file from FCP (7.0.2, fwiw). I insert a blank single-sided (ie 4.7GB) DVD into my internal DVD drive, drag the QT file into it