Having difficulty -- via airplay -- w/ streaming sites from ipad2 to g2 apple tv -- get audio but not video -- what gives???
having difficulty - via airplay --w/ streaming sites from ipad2 to g2 apple tv -- get audio but not video -- what gives???
What site are you trying to watch? I just tested 3. The you tube app streams from the pad to apple tv fine, as long as the source video format is ok. Checked a site called funny or die.com. Most of the videosmthere stream to apple tv fine. A few have a different format, and do audio only. Netflix does not stream at all, but you can get to netflix directly from apple tv. Whether or not it streams is directly related to the format of the video. Some do, some dont.
Similar Messages
-
Getting audio but not video during playback using Airplay-
I'm using my iPad 3 to stream content from my Amazon Prime video account the via Airplay to my Apple TV. I'm getting the audio, but not the video. Are these units capable of doing what I'm trying to do, do I have to set up certain settings to do this? Help!!!
How do you know or find out if that's indeed what they're doing of if something is after all technically awry?
-
I get audio but no video when trying to AirPlay from iPad to apple t.v.
I tried to play from CCTV app to Apple TV I only get audio when I it the airplay button it tells me to double click home button and swipe left select mirror button but that is not there. When I try to play normal movie already on my iPad it works no prob.
Yes, but if the icon is there, then it's been enabled, right? So if you're getting audio and not video, it's enabled, but not working properly. I have enabled apps, and they barely even get chunks of audio. Useless...
-
My o2 email account does not work when sending from my MAC it will accept incoming mail but not send it gives me a message that o2 account (offline) my mac I have no problem with my iPhone or mac laptop. any suggestions please.
Sorry for the delay...
I did what you've told me, new account and manually copied my files from Time Machine. I had lots of permissions problems, but at the end, almost everything is in order... It seems it had to be with some of the Apple Preferences, but I can't be sure, as most of them were dumped to the trash can.
I still don't have my Mail Rules back, unfortunately, although I did goggled some. It is a pity, as I had around 30 or 40 of them, getting my mail in order to each of its mailboxes, but it is a small price as the rest doesn't show the before syntoms.
Thanks for the help, anyway!! -
I get audio but no video unless I play the file from UTube
I get audio but no video unless I play the file from UTube
Use a different browser?
Firefox (from Mozilla)
Opera (from Opera)
Safari (from Apple)
Chrome (from Google)
ANY of those will work where IE11 won't, with the Flash Player Plug-in (For all other browsers), and Chrome doesn't even need that because it has its own Flash Player plugin built in.
Even if it's just to redownload the driver. I recommend another browser. -
Avi file from PC user has audio but not video
When I play a .AVI file from a PC user through Quicktime pro, I am getting no video, but can hear the file fine.
Any ideas what may be wrong?
Playing it on a PC gives full video & audio
Cheers
JustinUsing VLC is about as simple as it gets and if that will not play the avi they are encoded in a very rare codec. One last thing you can do is open the avi in QT Player and open MovieInfo in the Window menu. If it says they are encoded with an Indeo codec then there is no way to play them in OS X. There are Indeo codecs for the Classic environment but none for OS X. Indeo codecs for Classic
-
I have my apple TV plugged into my Denon receiver. My receiver is setup with 3 speaker channels, one center, one left front and one right front. When I listen to music via Airplay, sound comes only from the center channel and right, nothing on the left. When I watch Cable Television (not using the Apple TV), all 3 channels work fine so I know that the speaker connections are fine.
I had problems with streaming until I changed the WiFi channel that I was using. The original one conflicted with my neighbor. After that, MOST of my streaming problems vanished. Occasionally, a movie would pause for more buffering and I eventually ran an ethernet cable from the Apple TV to my Apple Extreme (to eliminate the Wifi). I have not had a single problem since then (except to repair the drywall after running the ethernet from one floor to another). :-)
-
I am having difficulty installing one of your products from indesign called AI?
I am having difficulty installing one of your products from indesign called AI?
AI = Adobe Illustrator? What are the difficulties? What operating system? What AI version?
-
Can I stream photos from laptop iphoto to apple tv?
can I stream photos from laptop iphoto to apple tv?
my macbook pro is hardwired connected to a 3rd generation appleTV. can't seem to connect a specific iphoto album to a tv screen via appletv
help please!iTunes > Advanced > Choose Photos to Share
-
I want to photo stream pix from my iMac to apple tv. When I try to enter the iCloud account name and password, the systems tells me that terms of service have changed and won't let me proceed. What's that about?
You need to reset the password for the "old" account, and then use that to turn off iCloud. Then you will be able to sign in with your new ID.
You can reset your password at iForgot.apple.com.
If you don't know the answers to the security questions, you will need to start there.
http://support.apple.com/kb/HT5312
-If you established a rescue email address, there will be a link on the "Passwords & Security" page of id.apple.com. Clicking the link will send the reset to your rescue email address (NOTE: This is not the same address as your Apple ID email)
-If there is no link on the page, then you didn't establish a rescue email address. Contact AppleCare at 800.694.7466 (If you are in the US), and ask for account security. You will need to answer some questions to verify your identity, AND you will need access to a computer to generate a temporary support pin.
-If you are not in the US, click http://support.apple.com/kb/HT5699 - Apple ID: Contacting Apple for help with Apple ID account security
HTH -
When I try to open a site I normally access i'm getting a bar that says,Firefox has blocked this site from opening another window then on the right side of the bar gives option to allow or not. Never did that before. Thanks
Hello,
'''Try Firefox Safe Mode''' to see if the problem goes away. Safe Mode is a troubleshooting mode, which disables most add-ons.
''(If you're not using it, switch to the Default theme.)''
* On Windows you can open Firefox 4.0+ in Safe Mode by holding the '''Shift''' key when you open the Firefox desktop or Start menu shortcut.
* On Mac you can open Firefox 4.0+ in Safe Mode by holding the '''option''' key while starting Firefox.
* On Linux you can open Firefox 4.0+ in Safe Mode by quitting Firefox and then going to your Terminal and running: firefox -safe-mode (you may need to specify the Firefox installation path e.g. /usr/lib/firefox)
* Or open the Help menu and click on the '''Restart with Add-ons Disabled...''' menu item while Firefox is running.
[[Image:FirefoxSafeMode|width=520]]
''Once you get the pop-up, just select "'Start in Safe Mode"''
[[Image:Safe Mode Fx 15 - Win]]
'''''If the issue is not present in Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one. Please follow the [[Troubleshooting extensions and themes]] article for that.
''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before opening Firefox for normal use again.''
''When you figure out what's causing your issues, please let us know. It might help other users who have the same problem.''
Thank you. -
Using Azul media player app on my ipad Apple tv will only display sound but not video from movies. Any ideas on a fix. I set mirroring to on but it still does not display video. It will display photos and video recorded from my iphone.
Here are the steps for AirPlay:
Before starting Azul from your (running iOS 5.x/6.x) home screen where have have all your apps we need to turn on mirroring
On your iPhone 4S/5 or iPad 2 or 3, double-click the Home Button to view your recently-used apps.
Swipe all the way to the right to until you see the icon.
Note: If the icon does not appear, go to the "If AirPlay Mirroring is not visible or available on your mobile iOS device" section.
Tap the icon to see the list of available AirPlay devices.
Enable AirPlay Mirroring in this menu by tapping on an available Apple TV, then sliding the Mirroring slider to ON.
Now you should be seeing your iPad/iPhone on your TV.
Start up Azul now and using the settings icon on the top right corner go to the option that say "TV out" ON.
When you do that you will see an Orange screen
Now click "Done" and play the video you want to watch and it will AirPlay -
Why does the clone stamp work when I go from a darker color to a lighter color but not the other way around? How can I lighted a dark area? The Lasso tool takes from the wrong area.
c.pfaffenbichler wrote:
Why do you use the Blend Modes Lighter and Darker at all in this case and not simply Normal?
And what kept you from posting a screenshot?
I borrowed the image below for an HDR workshop I ran at the 2010 PSNZ National Convention, to demonstrate a method of removing halos. You'll remember that halos were a serious problem with early HDR, and while the halos in this image were caused by over sharpening, they are perfect for demonstrating this technique.
It relies on the fact that halos so often tend to put a lighter tone between the two areas where sharpening is being applied. Whether that is the sky abutting a dark line of hills, or the rock and little tower as in this image. I've uploaded it at the size it was supplied to me at (about 2700 pixels wide). So
Click to open the full image, right click and copy, and paste into Photoshop.
Select the clone tool, and set its blend mode to Darken.
Try to sample on a line horizontal to where you want to clone, to give the best tonal match, and start cloning.
Because the sky is darker than the halo, it overwrites it. But the rock is darker than the sky, so it has no affect.
It works even better if you clone on a new layer also set to Darken. No masking, just Photoshop blend mode magic.
You can also fix the little tower. Use a great big brush — just remember to sample horizontal to match the horizon.
Back then I was using the same trick with CAs after forgetting to fix them in ACR, and having done too much work to start again after spotting the problem. -
FLVPlayback audio but no video when streaming
I have a flash program that loads an external flv dynamically. I first create an empty movie clip then I attach an instance of the FLVPlayback component using Moviclip.attachMovie();. Then i control the FLVPlayback component with AS2. I have a play and pause button, a scrubber, and a loading progress bar. None of these are components. When I publish and preview the file in Flash CS4, Adobe Flash Player 10, and all my internet browsers everything works fine, all the buttons, the multiple functions of the scrubber, and even the loading progress bar. However when I uploaded all the files from my computer to my company's server and tested it from there, I recieved audio but no video. All of the various controls still worked for the audio but I couldn't see anything on the stage. If I waited for the loading progress bar to complete and then reloaded the external flv then I got video, but the purpose of this program is to stream the video and I cannot have the users waiting for a preloader. Please help me to get my video to show and not just my audio.
If you want to look at my FLVPlayback code here it is:
_root.createEmptyMovieClip("lesson_mc",-16381);
lesson_mc.attachMovie("FLVPlayback","lesson_video",0);
lesson_mc.lesson_video.contentPath = page.attributes.url;
lesson_mc.lesson_video.autoSize = true;
lesson_mc.lesson_video.autoRewind = false;
lesson_mc.lesson_video.autoPlay = true;
lesson_mc.lesson_video.bufferTime = 20;I don't know what cross-domain issues are, but i had double checked my flv's path/file name and since reading your post have checked it again.
Heres the thing though, I can still get video, so it can't be these problems. I previously wrote this:
kibbik wrote:
All of the various controls still worked for the audio but I couldn't see anything on the stage. If I waited for the loading progress bar to complete and then reloaded the external flv then I got video, but the purpose of this program is to stream the video and I cannot have the users waiting for a preloader.
But I can't get it before it finishes loading. I want to stream it. -
I'm actually trying to find the date i visited a site. adding columns allow the order to be sorted but not show a date. Please tell me it there's a way to see the date. the sidebar no longer has the option for date. the most recent only shows the time.
If you only see the time then that would mean that you see an entry of the current day (today).
History items from past days should have the date as well in the Most Recent Visit column.
You should be able to see this changing if you open the last 7 days folder and scroll down.
Maybe you are looking for
-
Hello, I wish to install Linux Ubuntu on my macbook pro by using boot camp to set aside space. Whenever I load the Boot Camp Assistant application out of the utilities folder in applications, it only gives me the options to download windows support s
-
Capturing the creation of an invoice by jpeg or PDF.
Hello all. Im trying to write an add on that takes an invoice before it printed and capture the file or image (or pdf) of that invoice by using UI API. 1. is it possible ? 2. if not by extracting the data using getdata method how do i know if its dra
-
Is this the best Adobe e-Learning can do?
Please hold as we route your chat to an Adobe Representative. Welcome to Adobe.com! My name is Carol. May I assist you with your selection today? Carol: Hi, How are you doing today? Ann: At this point a little on the cranky side. Ann: I would like to
-
I would like Automator to add a to-do event (with due date) in iCal every week. Can anyone tell me how to do that?
-
Just today, I realized that I was not getting email. After fiddling with it a bit, I realized that If I quit the mail app and open it again, it will trigger a request to get my mail and a bunch of messages will come in. I have tried hitting the Get M