Having domain name without all the jargon before it.

If I use iWeb to create my website. Is there anyway that I can ommit this from appearing before my name: http://web.mac.com/irisag/iWeb/irisag/Home.html
I was unable to find another person who has iWeb as their webdesign program on Google because of all the information prior to his name.
This information is imperative on my decision to use iWeb to build my website versus GoDaddy. HELP!

Purchase a domain name from a domain name registrar such as GoDaddy and then build your site in iWeb. You can then either publish to MobileMe and use CNAME to forward your domain name to your site or you can also purchase a hosting account from GoDaddy and upload your site directly to your hosting account at GoDaddy.

Similar Messages

  • Lync 2013 /w Edge not working properly (internal/external same domain name and all "external" users"

    Hi,
    I've got some issues with a Lync 2013 setup.
    The config consists of 2 lync servers. One FE and one Edge. All seems to work except audio in meetings and Sip.
    The setup is like this (fake ip's used):
    Front End:
    Internal IP: 172.16.0.10
    External IP: x.x.185.10
    All ports open in Cisco ASA
    internal AD DNS: dialin/lync/meet/lyncdiscover to Front end internal ip. edge/lsedge/sip points to edge internal ip
    EDGE:
    Interal IP: 172.16.0.11 (no gateway configured)
    External IPS: x.x.185.11, x.x.185.12, x.x.185.13
    All external IP's are direct internet facing, no NAT (a firewall is in place).
    All external interfaces are using a wildcard certificate.
    All server are running in a remote data center, so basically no internal users. We all connect to the external interfaces. The Windows domain name (AD) is the same as our External DNS (companyname.com).
    Autodiscover works, we can logon, chat but there is no audio. The audio test failes. Also SIP is not working with a sip trunk.
    External DNS: sip/webconf/av are pointing to their external ip's. sipexternal is a cname to sip. lyncdiscover/lync/dialin/meet all point to the Frond end External ip.
    _sip._tls/_sipfederationtls.tcp/_xmpp-server.tcp all point to the sip.companyname.com ip.
    I just can't figure out what is wrong.

    @PSingh123 I'll try the logs in a minute and get back with the results.
    @PaulB_NZ Thanks for the input. In my opinion the FE does need an external IP. How else will you be able to connect if you are a remote worker?
    The Edge is (asfar as i know) needed for Enterprise voice and Federation with other (external) sip domains. It's not needed for basic (chat/video/whiteboard etc) Lync functionality for both internal and external (remote) users.
    The Edge is to communicate with services/users outside the origanisation.
    I do still think that the basic topology (FE with internal IP and Nat'ed external ip working with an Edge with internal IP and 1 external IP nat'ed to 3 DMZ ip's) is correct in this case.
    I can be wrong and in that case would like to be pointed to the correct configuration.
    75           
    Points
    Top 15
    PSingh123        
    Partner        
    Joined  Jun 2007        
    9
    PSingh123's threads
    Show activity

  • My brother-in-law recently passed away. My sister gave his MacBook Pro to my niece. When she opens and starts the laptop, it shows my brother-in-laws name. Is there a way to change his name to her name without formatting the device and starting over?

    My brother-in-law recently passed away. My sister gave his MacBook Pro to my niece. When she opens and starts the laptop, it shows my brother-in-laws name. Is there a way to change his name to her name without formatting the device and starting over?

    BigTex415,
    my condolences for your family’s loss. If all she seeks to do is to change the display name, and she’s willing to leave the account name unchanged, then she could do the following: log in as the administrative user and open the Users & Groups pane of System Preferences. If the padlock in the lower-left corner is locked, unlock it. Select the account that shows your brother-in-law’s name on the left-hand side of the window, and then on the right-hand side, change the text in the “Full name” textbox to her preferred display name. If desired, click on the padlock in the lower-left corner to relock it.

  • How do I avoid having to re-download all the software updates for SUS after migrating to lion, I have all the snow leopard/Lion updates saved to disk already

    I have recently upgraded from Snow Leopard Server to Lion Server, all works well so far.
    I had Snowleopard Server supplying the updates to my Snowleopard and Lion clients with no problems.
    I now need to get Lion Software update server running on the Lion Server and would like to avoid having to re download all the updates from Apple
    (The updates are nearly 50Gig and my ISP limit is only 100gig for the month).
    How do I copy in, an rebuild the updates from my Snowleopard server backup?
    I have tried but I think I ran into a permissions problem.
    I'm not that experienced yet with the command Line/terminal but I'm getting there.
    Any help would be appreciated.

    It has to be 10.6.8 I believe, before you can upgrade to Lion. I found some more info, please check out: http://www.informationweek.com/byte/howto/personal-tech/desktop-os/231001728
    Be sure all your programms will work on Lion. Power PC programms do not work anymore (eg Nikon Scan 4 will not work from now on on Mac OS X). Some versions of Canon utilities for camera's do not work, Canon still have to upgrade. For an App Compatibility Table: http://roaringapps.com/apps:table

  • What will happen to the organization of library if I removed the songs from windows explorer? Will iTunes automatically updated without all the deleted songs, or it will indicate 'missing location'? Any fast ways to clear this 'missing location' songs?

    What will happen to the organization of library if I removed the songs from windows explorer?
    Background: I found it easier to identify duplicated songs in windows explorer as the songs will be renamed .... 1.mp3, thus enabling me to remove the duplicated songs; unlike in iTunes where I know the trick of showing duplicate songs, but you don't know which one is the one with 1 at the end of the file name.
    Will iTunes automatically update the library without all the deleted songs, or will it indicate 'missing location' songs? Any fast ways to clear this 'missing location' songs by highlighting them all and delete all at one go?
    Thanks.

    One way is to use iTunes Folder Watch with its option to check for dead tracks on start up.
    Another option is with a set of Lost & Found playlists.
    Lost & Found
    Create a playlist called Found, select everything in Music and drag it into the Found playlist. Create a smart playlist called Lost matching All the rules Playlist is Music and Playlist is not Found. Your lost tracks will be in this playlist. You can delete them all with a Ctrl-A to select them and Shift-Delete to remove them.
    You can then delete the Lost & Found playlists.
    tt2

  • My computer crashed. So does this mean I can not add any more music to my ipod from a different computer without all the songs being erased? Can I sync my ipod to a new computer if I allow all the songs to be erased?

    My computer crashed. So does this mean I can not add any more music to my ipod from a different computer without all the songs being erased? The ipod works fine and now i got a new computer. So it seems like my only options are leaving my ipod in a state where i cant add anymore songs or erasing all my songs and trying to use my ipod from my new computer. Can someone please inform me on how to have my ipod work from a different computer, even if i have to erase my songs. Thanks.

    Yes, if you choose the Erase and Sync option (or restore your iPod) you will be allowed to sync your iPod with the new computer.
    If you would like to save the content that's currently on your iPod, see this older thread from another forum member Zevoneer discussing the different ways to copy the content on an iPod back to your PC.
    https://discussions.apple.com/thread/2417169?start=0&tstart=0
    B-rock

  • I have an old 4GB Ipod nano and an I-Phone 4S. I only want music to sync to my I-Pod without all the apps from the phone. Can someone tell me how to do this please?

    I'm updating the music in my I-Tunes. I have an old 4GB Nano but I also have an I-Phone 4S. I only want music and nothin else on my I-Pod, how can I get it to sync without all the apps as, obviously the I-pod doesn't have enough memory?

    "Other" is data that the iPod doesn't know how to deal with (but on your nano, it isn't Apps). All iPods have some quantity of "Other" on them. Sometimes Other is corrupt files that cannot be read.
    The usual remedy when the quantity of Other becomes too big, is to Restore the iPod. However, 0.26GB of Other doesn't appear to be very much and I suspect you won't see much change, if any, if you Restore.

  • How Can I restore my ipod shuffle to factory setting (without all the software updates)?

    After updating my ipod shuffle, my car no longer recognize it. I cannot connect it to my car via usb. For the past few weeks I have been listen to only songs on the radio. I tried to restore it, but fond out that all it did was removed all my songs ect, but the update is still the most current version. Please someone, please help me. How can I restore my ipod shuffle to the original factory setting without all the update.

    You may have the accessibility VoiceOver feature or another one turned on.
    Triple click the home button and try going to Settings>General>Accessibility and turn VoiceOver off and any others off. You may have to use three fingers to scroll the screen to get there. If problems see the following for how to turn off via iTunes:
    iPhone: Configuring accessibility features (including VoiceOver and Zoom)
    Next try:
    Try:
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Restore from backup. See:                                 
    iOS: How to back up                                                 
    - Restore to factory settings/new iOS device.
    If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
    Apple Retail Store - Genius Bar                       

  • Function module to get the name of all the function module used

    I want to populate a internal table with the name of all function module used in the submitted program?? Is there any function module which return the name of all the function module used?

    Hi Priya
    Try this one RPY_FUNCTIONMODULE_READ.
    Ranga

  • To get the logical system names of all the child systems in a CUA envirnmnt

    Hi Gurus ,
    Is there any table where we can find the logical system names of all the child sytems in a CUA environment .
    This is for a requirement that i need to develop an automated process where we can reset the password of all the child system in a CUA environemt when requested by the user at once .
    I found some tables such as V_TBDLS , but they do not contain the exact information what i need .
    Thanks in advance ,
    Harshit Rungta

    Hi,
    You are in the right track. BD54 will show you the logical system name for all the existed systems in CUA.
    Else you can also go to your CUA system and execute t-code SALE --> Basic Setting --->Logical Systems  ---> Assign logical system to client -
    > Display details
    here you can see logical system names for all the clients assigned to CUA.
    Thanks,
    Deb

  • I did download the new version of adobe but a massage showed all the time (Before viewing PDF documents in this browser you must launch Adobe Reader and accept the End User License Agreement, then Quit and relaunch the browser)

    i did download the new version of adobe but a massage showed all the time (Before viewing PDF documents in this browser you must launch Adobe Reader and accept the End User License Agreement, then Quit and relaunch the browser)

    You downloaded Adobe... what? Adobe has tons of applications.
    Which Adobe product did you download?
    Clinton

  • I want to print the front panel without all the header stuff while the vi is running

    I want to print the vi front panel without all the header information that Labview puts at the top. I want to do all this while the vi is running by pushing a button.

    One option is to use the the 'Print VI to Printer' method. Beware that invoking this method repeatedly with complex front panels has caused me graphics problems in my VI's display that persist until the development environment or the built .exe app is exited and re-entered.
    See: http://exchange.ni.com/servlet/ProcessRequest?RHIVEID=101&RPAGEID=135&HOID=5065000000080000005F5A0000&UCATEGORY_0=_49_%24_6_&UCATEGORY_S=0&USEARCHCONTEXT_QUESTION_0=spaz+print&USEARCHCONTEXT_QUESTION_S=0
    NI has confirmed this to be a bug in 6.0x and 6.1 and has indicated that it will be fixed in the next version.
    I was forced to fall back on the Append Front Panel Image to Report.vi in the report toolkit. Which does not produce printed graphs of as high as quality as the Print VI to
    printer method.

  • How can I get IP and hots names of all the machines.....

    I need to get the IP addresses and host names of all the machines in my netowrk and need to select only is a HP / Compaq x86 machines finaly.
    If you know atleast a part of this please help me.
    [email protected]

    You coulduse the broadcast address (x.x.x.255) in an ICMP sweep to determine which hosts are alive (and accepting ICMP).
    But no, there's not a single (and definitive / sure) way to retrieve all IP addresses.

  • Is there a Button menu option that will allow one view the names of all the buttons already created?

    Is there a Button menu option in InDesign CS 5.5 that will allow one view the names of all the buttons already created?

    Thanks for your prompt feedback! However, this option does not work for me -- and I'm not sure exactly why.
    Originally, when I tried your suggestion, I got the unsatisfactory result illustrated in the following help request: https://support.mozilla.com/en-US/questions/758172
    Now I am in the process of testing several new add-ons to fix this problem, and I am getting a very different (and even more unsatisfying) result illustrated in the attached image -- so I realize the problem may now be compounded by one or more of the new add-ons.
    (See the attached image that illustrates what happens now when I click on the MyDocs URL after is has been added to my Bookmarks tree.)
    UPDATE: I'm going to try the LocalLinks add-on to see if this will help me open local links using my FireFox bookmarks: https://addons.mozilla.org/en-US/firefox/addon/locallink/
    Will let you know if it works....

  • Getting system names of all the nodes that compose a cluster

    I need a way to get the names (weblogic.system.name) of all the servers that compose a cluster from a JSP or a servlet. Can anyone help ?
              System: Weblogic 5.10sp10 on Solaris with SDK 1.3.0
              [att1.html]
              

              Using WLS 5.1 internal APIs, you can do this by the following:
              weblogic.cluster.ClusterManager clusterManager = weblogic.cluster.ClusterManager.theOne();
              com.sun.java.util.collections.Collection c = clusterManager.getClusterMembers();
              weblogic.cluster.ClusterMemberInfo[] infos =(weblogic.cluster.ClusterMemberInfo[])
              c.toArray(new weblogic.cluster.ClusterMemberInfo[0]);
              if (infos != null) {
              for (int i=0; i < infos.length; i++) {
              ClusterMemberInfo info = infos;
              String clusterName = info.name();
              System.out.println("Cluster Name is: " + clusterName);
              "Laurent PAILLARD" <[email protected]> wrote:
              >C'est un message de format MIME en plusieurs parties.
              >
              >
              >I need a way to get the names (weblogic.system.name) of all the servers
              >=
              >that compose a cluster from a JSP or a servlet. Can anyone help ?
              >
              >System: Weblogic 5.10sp10 on Solaris with SDK 1.3.0
              >
              >
              ><!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
              ><HTML><HEAD>
              ><META http-equiv=3DContent-Type content=3D"text/html; =
              >charset=3Diso-8859-1">
              ><META content=3D"MSHTML 5.50.4522.1800" name=3DGENERATOR>
              ><STYLE></STYLE>
              ></HEAD>
              ><BODY bgColor=3D#ffffff>
              ><DIV><FONT face=3DArial size=3D2>I need a way to get the=20
              >names (weblogic.system.name) of all the servers that compose a =
              >cluster from=20
              >a JSP or a servlet. Can anyone help ?</FONT></DIV>
              ><DIV><FONT face=3DArial size=3D2></FONT> </DIV>
              ><DIV><FONT face=3DArial size=3D2>System: Weblogic 5.10sp10 on Solaris
              >=
              >with SDK=20
              >1.3.0</FONT></DIV></BODY></HTML>
              >
              >

Maybe you are looking for