Having Excel blank column issues since switching from 8.5 to XI.

Please help!!! My company updated from Crystal 8.5 to XI over the weekend and the reports are now coming through with blank columns. What can be done to fix that?
Thanks,
Wes

I am having the same problem (XI) and going nuts.
Visually, all the fields appear to be flush with each other.
I even went as far as to look at the Size / Position of each header and data field to make sure they all are correct.
Example.
All fields and headers are of size .7.
I have made sure that each subsequent field starts at position x + .7.
So column 1 begins at X =3.
Column 2, is X = 3.7
Column 3 is X = 4.4
Column 4 is X = 5.1
Column 5 = 5.8
etc.
No matter what I do, I can't get rid of the blank column that appears between columns 3 and 4.
I have noticed that column 4 keeps getting reset to 5.09 rather than the 5.1 that I enter. Could that be doing it? And if so WHY is it not allowing me to change it?
Any ideas?

Similar Messages

I am running iTunes 11.3.1.2 on my Windows 8.1 laptop and am unable to change any info on any songs in my library. I have had this issue since switching to Windows 8.1

I am running iTunes 11.3.1.2 on my Windows 8.1 laptop and am unable to change any info on any songs in my library. I have had this issue since switching to Windows 8.1
I don't have this same issue on my Windows Vista laptop which is no longer being used fro iTunes

I am running iTunes 11.3.1.2 on my Windows 8.1 laptop and am unable to change any info on any songs in my library. I have had this issue since switching to Windows 8.1
I don't have this same issue on my Windows Vista laptop which is no longer being used fro iTunes

Some issues after switching from 686 to x86_64

Hi all,
after switching from i686 to x86_64 using this link I am now facing some minor issues with some packages. I already activated the multilib repository but some problems remain. I checked the binaries in /usr/bin for 32 bit executables as described in the above link and there are 177 "bad" binaries left. I thought all of these were not executable, but surprisingly wine was. Strange!
ffmpeg is another 32 bit executable and not runnable. So I tried to reinstall it, but that failed:
> pacman -S ffmpeg
warning: ffmpeg-1:2.6.1-1 is up to date -- reinstalling
resolving dependencies...
looking for conflicting packages...
error: failed to prepare transaction (could not satisfy dependencies)
:: ffmpeg-compat: requires libx264.so=144-32
libx264 is installed and didn't want to be reinstalled either:
> pacman -S libx264
warning: libx264-2:144.20150223-1 is up to date -- reinstalling
resolving dependencies...
looking for conflicting packages...
error: failed to prepare transaction (could not satisfy dependencies)
:: ffmpeg: requires libx264.so=144-32
:: ffmpeg-compat: requires libx264.so=144-32
Can someone give me a hint, what's the best way to solve this problem?
Thanks in advance, Zmann

I think the first issue you will run in to is that the interface for an old P4 hdd will probably not be the same as a new computer. Besides that, it will probably be vastly slower than what comes with a new computer. I think that is not the best idea.
The only wat to really "trasition" between two archtectures that I know of is to copy configuration files over and have pacman dump a list of explicitly installed packages from the main repos. Then use that information to reinstall all those packages.

Are there any known issues in switching from windows on vmware to boot camp?

i want to switch from running Windows under Mac to dual boot. any advice or gotchas would be appreciated!

Uninstalling Fusion and the Windows VM -> http://kb.vmware.com/selfservice/microsites/search.do?cmd=displayKC&docType=kc&e xternalId=1014529&sliceId=1&docTypeID=DT_KB_1_1&dialogID=235628022&stateId=1%200 %20254064791
Stefan

Since switch from pc to mac epson R800 producing lousy photos.

Recently switched from pc to mac pro. Using Epson R800 printer. Cinema Display is calibrated using spyder pro. Mac driver downloaded from Epson seems to work okay altho setup is quite different from PC. Really not very good, actually. Prints are really very poor, not acceptable by any standard.
Have rechecked with Epson and apparently I have the newest driver for mac os x.
Anyone got any ideas???

Yep, know all that. The problem that seems to exist is the inability in the mac to control all of the usual features that were previously controllable when this printer was setup on the pc.
I downloaded the mac driver for this printer from Epson but peculiarly in CS3 it does not allow for all functions. Why? Wish I knew.
So, downloaded it again, just in case a file or whatever went missing on the first download. Same thing happens. Not all printer controls are usable.
Oh and nope I do not have the gutenprint or whatever it's called listed so that's not the problem.

Is anyone having Web Sharing issues after switching from 10.6 to Mountain Lion?

I want to upgrade to Mountain Lion from Snow Leopard (10.6.8) but I wanted to see if anyone is experiencing any issues with their Web Sharing after making the switch. I use Web Sharing daily to build and test web sites for my clients and when I made the switch to 10.6 none of my database driven sites worked. Ultimately I had to install a new version of PHP 5 because 10.6 came with and older version. And I had to reinstall SQL for my databases along with some other related items. It wasn't a major problem but it took a couple of days to track down the issue. Anyone seen any weirdness like that with Mountain Lion?

Web sharing is absent in Mountain Lion. Apple removed the feature. There're some unofficial hacks to bring it back, search the forums.

Disasterous email problems since switched from Eudora to Mail

On Feb. 1 I switched my broadband from Clear wireless to Comcast and my email client from Eudora to Mac Mail due to its allowing different port settings for my 2 personal email addresses which are forwarded and my business address which is not. I had occasional problems of not receiving certain emails but not constant. Now I figure about a quarter of my emails incoming and outgoing are disappearing forever without any bounce back messages. I even set up exclusive new email addresses on my server for a couple of my writers, some of whose mail I failed to get. Even one of those emails was lost. My business is threatened. Help!
I have received conflicting advice from AppleCare, Comcast, my hosting firm and others. Neither Comcast nor my hosting co. are filtering anything, according to them. Emails I fail to receive never get to the server - they are supposedly lost somewhere out there. My senders are not blocking mail because most of my msgs and theirs get thru. Lost emails never appear in the Junk folder. I use POP, Authorization, not SSL. My hosting says I should use Port 26 for outgoing; they won't say what to use for incoming. AppleCare says to use Port 110 for outgoing on my personal email addresses and to use the ISP that forwards them for the Incoming: mail.aracnet.com We still use Eudora on the MacBook so it's difficult to compare and test Mail settings.
I'm trying to work with Eudora Mailbox Cleaner to get my Address Book properly copied over. Mac Mail totally wrecked it, but I don't know how to delete that bad import first.

Really appreciate your assistance! My hosting people are being no help at all. I'm very familiar with "edit server list" - have been there often. It is my hosting person who tells me their logs show that none of the various emails I failed to receive on the first sending - for which I expand the headings and forwarded to him - have ever reach their server and therefore something's going wrong "out there" and they're not responsible. He even just suggested I sign up with gmail for my email service since I've been so much trouble to him. I've had an email address on my own server for ten years now - [email protected] - and don't want to change it!
I corrected the terrible instructions I got from AppleCare and reversed my incoming and outgoing server settings to audaud.com for regular email and to mail.aracnet.com SMPT for my two personal email addresses I want to send thru Aracnet. (and am paying them to forward them to the audaud.com server). However, when I just tried to reply to an email I received to [email protected] I got a warning I never saw before: (Thought I could attach a screenshot of it but can't seem to) It says "cannot send the message using the server audaud.com." Yet a few minutes later I sent an email to several of the writers for my site and it was sent. The settings were the same!
My hosting people told me to use Port 26 for sending but they refuse to tell me which port to use for INCOMING mail (using POP). Maybe the port settings are fouling me up, but why do they cause problems only part of the time? I don't use SSL.
Doesn't everyone receive via their email client "all the emails that get to the server?" Again: any directions on deleting the non-working import of the Eudora Address Book and doing it again properly with Eudora Mailbox cleaner?

Assistance with poor speeds since switching from P...

Hi all,
New BT customer looking for some help.
I was previously with Plusnet, and receiving 37mbit download, and a lowly 2mbit upload.
I recently switched to Infinity 2 (6th June), and have allowed for the initial settling in period.
It was quoted to me by the lady in sales at the time:
Roxy: 49.4Mb download
Roxy: 10.9Mb upload Now
Roxy: As long as it states that and showns Infinity, the above confirmed speed will be the speed you get with this package
Having run the BT speed test, following the instructions implicitly I am actually getting:-
30Mb download
5.6Mb upload
I get similar speeds from other independant speed test sites.
It's clear to me something is wrong, either my IP profile is capped in the region of 30Mb or this is all my line can accept once my upload speed is increased, can someone investigate this please as the 49.4 originally quoted is clearly not being received? Evidently from previous fibre usage with a different supplier my line is capable of at least 37Mb download and I presumed that Inifinty 2 would push this further, which is the reason I switched.
Many thanks for any assistance,
Chris.

Hi Chrisoldinho
Welcome to the forums.
Have you reset both the Home Hub and Openreach modem? If you still experience the slower speeds send us an email using the contact us form in my profile.
You can click on this link in the section 'About Me'.
Thanks
Stuart
BTCare Community Mod
If we have asked you to email us with your details, please make sure you are logged in to the forum, otherwise you will not be able to see our ‘Contact Us’ link within our profiles.
We are sorry that we are unable to deal with service/account queries via the private message(PM) function so please don't PM your account info, we need to deal with this via our email account :-)

VISA issues when switching from Labview 5.0 to 8.5

Hello all
I am using a pressure transducer that I read using RS-232. In Labview 5.0 I used the Read Serial VI and it worked with no issues (I also tested it with the VISA from 5.0 with no problems either). Now I have upgraded to 8.5 and I seem unable to communicate with it anymore. The usual error I get when i try to read is a timeout error.
I ran the Troubleshooting Serial Line Monitor VI and it seems to work (RI blinks when the output lines are off, DCD RI and CTS blink when DTR is on, and RI DSR and CTS blink when RTS is pushed) The Basic Read and Write VI does not work however. Whenever I get bytes at port it always returns 0. I am using a USB-RS232 converter but this problem remains when I tried using an RS232 port on another computer running 8.2.
I recently added the VISA 4.3 drivers but this did not help.
Thanks for any ideas.
Thomas

This morning I tried with both the DOS prompt and Indigo terminal emulator. I also checked the setting on my manometer and the manual says that the settings should be:
Baud Rate: 9600
Parity: None
Auto Line Feed: Yes
Margin: 0
Decimal Point: "."
Send EOF: Yes
I then followed the instructions to set the port with MODE COM5:9600,N,8,1,P and it returned
transfer rate: 9600
parity: none
databits: 8
stop bits:1
timeout: on
XON/XOFF: OFF
CTS-handshaking: ON
DSR-handshaking: ON
DSR-sensitivity: OFF
DTR cycle: Handdhake
RTS cycle: Handshake
Then when I try to log the data with COPY COM5 log.txt it creates a txt file on my desktop with no information.
I checked the parameters on the old Labview 5.1 (not 5.0 as I said earlier) computer and they were
Error Replacement Character: 0
Flow Control XOFF Character: 0
Flow Control XON Characcter: 0
Serial Baud Rate: 9600
Serial Data Bits:8
Serial End Mode for Reads: Term Char
Serial End Mode for Writes: None
Serial Flow Control: None
Serial Parity: None
Serial Stop Bits: 1.0
Those were the only parameters available in the Serial Settings Node
With 8.5 I got all the same except
End Mode for Reads: None (when I changed it to TermChar, it didn't help)
XON: 17
XOFF: 19
There were many many more modem line settings but I didn't include them because they weren't in Labview 5.1

Since switching from Chrome, I can't print .pdf attachments directly from my gmail. Please help.

It used to be (in Chrome) that I could view a .pdf attachment in gmail and from there print. Now in Firefox, when I view a .pdf attachment the print option is there and the print dialogue box comes up when I click it, but once I hit "OK" nothing comes out of the printer. I can print emails and other items, so it's not a printer connectivity problem or a problem with the print setup in Firefox. The only items affected are .pdf attachments in my gmail account. I've tried switching .pdf readers and turning off Protected Mode in Adobe. Please help!

What PDF reader r u use and what version is it?

Ipod issues after switching from PC to Mac

I finally got my music library and songs moved to the new Intel Mac using the ipod and all is synced up again, however the ipod now moves considerably slower than it used to. Sometimes it takes up to 10 seconds to skip to the next track.
My questions are:
1) Would a restore from the new Mac make things run smoother?
2) If so, before I do, I have more files on the PC I'd like to move over, so I need to complete that first, right?
3) Some of these files on the PC are very large (1-5GB), is that a problem to move them using the ipod?
Thanks for the help!
JV
Intel imac, ipod Photo 60GB Mac OS X (10.4.4) Windows convert!

1. Yes.
2. You can use a product such as MacDrive to read Mac formatted disks on a PC.
3. The FAT32 disk format used by a Windows iPod cannot accomodate files larger than 4GB regardless of the capacity of the drive; either put it in the Mac format and use MacDrive, or compress larger files before putting them onto the iPod. There is no issue with smaller files.
(10503)

Excel files are locked since transfer from pc to mac

I just transferred my excel files from pc to mac and now i can't open them, it says they are "locked for editing" by user (i did not lock them) i can only open as read only. Is there a fix for this problem? Anyone else had this problem?

Where are these files saved??
Maybe this will help...
I found this post on a different web site - http://answers.microsoft.com/en-us/mac/forum/macoffice2011-macexcel/office-files -locked-for-editing-in-mixed/d838b0d7-6b26-4206-b310-029c73cf0ba6.
This problem is caused by a temporary file that was not deleted after a previous edit session was completed. The file is hidden and not normally visible through the Finder. The easiest way to view hidden files is to install the hidden files dashboard widget which is available here:
http://www.apple.com/downloads/dashboard/developer/hiddenfiles_matthansen.html.
Use the widget to show hidden files then use Finder to open the folder that contains the spreadsheet you wish to edit. If your spreadsheet is named abc.xlsx, you will also see a file named ~$abc.xlsx. Delete the file that begins with ~$ and you will be good to go.

Since switching from mobile me to icloud, have email connection problems

Ever since mobile me was eliminated and everything swiched to icloud, my imac has problems connecting to mail. Mail Connection Doctor shows it's only able to connect to icloud IMAP, but not my email IMAP, icloud SMTP or smtp.me.com:xxxxx.

notreadytomakenice wrote:
what about mobile me aliases. will they sync too? will i have access to all my email history?
When you move from MobileMe to iCloud, your active email addresses (@me.com, @mac.com, and all your aliases) move with you, along with all of your messages, mailboxes, and rules.

IWeb Blank White Pages Since Moving from MobileMe

Hello, I've recently got some hosting (and a new domain: absurdityandeverything.com for my iWeb site (from at space) following the move from MobileMe. I've finally managed to upload the site via ftp but when I visit the site it's just a blank page. Any ideas? Thanks, James

Try publishing to a folder on the desktop and use a 3rd party FTP client like Cyberduck, Transmit or YummyLite. All three give you a Finder like window of your account folder on the server so you can see what's there. They also let you manual upload the site folder or specific subfolders when you determine what is missing.
My process is to publish to a folder on the hard drive and use Web Site Maestro to optimize the size (for faster downloading in browsers) and upload the files to the server. After the first upload WSM has a feature to upload only new or modified files during the next publication and upload.

Since I switched from Internet Explorer to Firefox, the Celeb Daily link I've always visted will no longer show the images / pictures. Cannot figure out why.

Celeb Daily is a celeb picture site that you can vote a rating of 12 different pics "daily". Since switching from Int. Exp. to Firefox they no longer come up, only texts & boxes. What gives? I am far from computer savvy. Don't go all technical on me if it's fixable. Thanx.

You can try these steps in case of issues with web pages:
You can reload web page(s) and bypass the cache to refresh possibly outdated or corrupted files.
*Hold down the Shift key and left-click the Reload button
*Press "Ctrl + F5" or press "Ctrl + Shift + R" (Windows,Linux)
*Press "Command + Shift + R" (Mac)
Clear the cache and cookies only from websites that cause problems.
"Clear the Cache":
*Firefox/Tools > Options > Advanced > Network > Cached Web Content: "Clear Now"
"Remove Cookies" from sites causing problems:
*Firefox/Tools > Options > Privacy > "Use custom settings for history" > Cookies: "Show Cookies"
Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem.
*Switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance
*Do NOT click the Reset button on the Safe Mode start window
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

Having Excel blank column issues since switching from 8.5 to XI.

Similar Messages

Maybe you are looking for