Having installation rollback issues with PSE 9?

Mr. Ankush Ved helped to solve my PSE 9 installation issues in under 30 mins!   Well
done  Ankush.  There was a cache file conflict that needed resolution.  I  recommend you contact Ankush via private message here, provide him with  your email address and allow him to see and operate your computer  remotely.
Adobe tech support (phone) was no help last night and I was on with them for over 1.5 hours! 
Somebody please give Mr. Ved a raise!

LOL....
Thanks to you for your patience and confidence. Glad that I was able to help you.
Best Regards,
Ankush

Similar Messages

  • I am having an installation failure issue with my itunes 11 software.  File is corrupted and i don't know what to do.  I've un-install and re-installed the software three times and continue to get the same error message.  It states that "This copy of ITun

    I am having an installation failure issue with my itunes 11 software.  File is corrupted and i don't know what to do.  I've un-install and re-installed the software three times and continue to get the same error message.  It states that "This copy of ITunes is corrupted or is not installed correctly.  Please reinstall Itunes"
    iMac, iOS 6

    HI,
    If your old version of iTunes is still working - then I sugest you stick with that.
    iTunes 11 is a lousy update - It will not retain your playlists, you can't find and delete duplicates... and a whole arry of oyher issues. (have a look around this forum to see how many issues IT11 gives people)
    Just a friendly advise and warning :-)

  • I'm having a huge issue with itunes locating my missing files..and it's too many for me to locate 1 by 1..It says I'm missing over 3,00 songs and They are all in my music folder..What can I do to fix this issue?

    I'm having a huge issue with itunes locating my missing files..and it's too many for me to locate 1 by 1..It says I'm missing over 3,000 songs and They are all in my music folder..What can I do to fix this issue? I've looked at all the tutorials on youtube and none of it works. I recently got a new computer and I Back-Up all my music and itunes playlist and I import it on my new computer with the new itunes and I go to play a few songs, it says I'm missing them I locate a few but it's still like 3,000 missing and again they are all on the computer and in one folder..Please Help !

    I did that and nothing changed half my songs still have examination marks beside them
    I also just tried dragging my folder of music int he playlist and it duplicated all of my songs? My playlist was at 5k now it's at 10k becuz of 3 duplicates of songs. Is there a way to delete multiple duplicate files?

  • I am having some serious issues with firefox, i can't print anything because it is stuck on fax and I can't use any of the drop down menus on any site

    I am having some serious issues with firefox to the point of choosing another search engine. I can't print anything because it is stuck on fax and won't let me change it to my printer when i do try to select my printer it jumps right back to fax. The drop down menus do not work on any of the sites I go to. For example when purchasing clothes and you have to choose a size from a drop down menu I can't do it when I click on the drop down menu it doesn't work at all. I don't have a virus I ran my virus protector and no viruses are present. I don't have any suspicious issues going on with my computer so there has to be something in Firefox that is causing my issues. I tried internet explorer and I don't have any issues there. I hope you can help me because I love Firefox and would really like to continue to use it.

    Lots of issues there, main one getting fcpx going again, try deleting the preferences using the utility deveoped by these guys.
    http://www.digitalrebellion.com
    Try deleting your render files and re-rendering the project.
    Start with these and let us know how you go.
    Tony

  • I'm having a billing issue with my apple id. I got my first iPhone today and I've signe din etc however before i can download any apps etc i need to resolve an old payment apparently. The problem is i cant enter my new card details because no longer in US

    I'm having a billing issue with my apple id. I got my first iPhone today and I've signe din etc however before i can download any apps etc i need to resolve an old payment apparently. The problem is i cant enter my new card details because the issue is registered to when i was in America and i require to pay the funds from an American source. Any ideas how i can resolve this? It wont accept my new card detail as im back in the UK. I think i have posted this in the wrong area but anyone got any ideas?
    I have managed to change the rest of my accoutn being registered to the UK i think except this

    Hi..
    You can email Apple for help but the link is for the iTunes store not the Mac App Store. You've inadvertently poasted in the Using Mac App Store forum but that's ok. Billing issues are the same for the iTunes Store.
    Click here > Apple - Support - iTunes Store - Contact Us
    It wont accept my new card detail as im back in the UK
    Your credit or debit card credentials must be associated with the same country where you reside.
    "Although you can browse the iTunes Store in any country without being signed in, you can only purchase content from the iTunes Store for your own country. This is enforced via the billing address associated with your credit card or other payment method that you use with the iTunes Store, rather than your actual geographic location."
    From here >  The Complete Guide to Using the iTunes Store | iLounge Article

  • Since I've installed Mountain Lion, I am having lock up issues with multiple programs. MS Outlook has crashed and I've lost all my folders. HELP?

    Since I've installed Mountain Lion, I am having lock up issues with multiple programs. MS Outlook has crashed and I've lost all my folders. HELP?

    okay I've finally been able to get tor and all the other programs to work according to my plan the only thing that's still making problems is that iptables doesn't work as I want it to, when I start chromium without proxy settings privoxy doesn't seem to forward the information to polipo.. do I need to add another rule to iptables.rules in order for the program to know it has to reroute the information again or how can I get this to work? and is there any way to run rtorrent with proxy support?
    anyway, problem 2 and 3 are still to be solved.
    and does anybody know where i can get a good dansguardian blacklist that was not designed for 6 year old children and for which I don't need to subscribe? I'm still getting these partypoker popups -.-
    //e: with iptables it's the same thing as described in the first post. https works, http doesnt. I get the output "Invalid header received from client." on http sites. still no idea why though.. (and the https-version of torcheck.xenubite says i'm tor unprotected while starting the browser with iptables)
    Last edited by deF291 (2011-04-23 16:16:31)

  • Having a weird issue with my assign after java embedding

    hi,
    I'm having a weird issue with my assign activity, i am using a Java Embedding wherin i access a variable and assign it some data, later in next step when i try to assign some other data to this same variable in assign activity i get a Error message as below.
    com.oracle.bpel.client.BPELFault: faultName: {{http://schemas.xmlsoap.org/ws/2003/03/business-process/}selectionFailure} parts: {{ summary=Invalid to part type. When performing the assign operation, the to node THIS,IS,,TEST is invalid. The node named in the error message was either null or an empty node set, and it was not an instance of org.w3c.Element. Verify the node value at line number 795 is not null and is an instance of org.w3c.Element. } .
    i'm using soa 11.1.1.5
    Can anyone please help ?
    - Thanks
    Shirish

    Shirish,
    It's a bug and you will need to apply a patch for that.
    You can find all explanation in Oracle Support Id ID 1194228.1.
    Arik

  • Issue with PSE 9 Editor

    Running PSE 9 on a new iMAc with 8 Gig memory, 1 TB hard drive.  When trying to save an edited file, the Editor consistently becomes unresponsive when I try to close the saved file requiring that I force Editor to close.  Not only with not Editor close the saved file but the Editor cannot be closed normally.

    I appreciate the help, I found out how to change paper type and it seems to work great.  The remaining question, when I've finished editing an image and attempt to "Save" or "Save As" the system shows a box "Adobe Photoshop Elements 9 quit unexpectedly".  If I go to "Reopen" it reopens the PSE at the organizer level and hasn't saved the image.  Also at this level, "Save" is grayed out and unavailable.  I sure appreciate someone that seems to know a lot more than the "Techs" at Adobe.Don
    Date: Thu, 7 Apr 2011 20:40:38 -0600
    From: [email protected]
    To: [email protected]
    Subject: Issue with PSE 9 Editor
    The second thing, opening the print dialog box does not open the same one as Windows, and allows no selection of paper type.
    That is just a difference between macs and windows. On a mac, you choose the paper and print quality in the OS X system print window that opens after you click the Print button in the PSE window:
    http://forums.adobe.com/servlet/JiveServlet/showImage/64219/ScreenSnapz.jpg
    If you only have the little stub window, click the triangle to the right of the printer's name to expand the dialog box to see all the menus.
    >

  • Has anyone else been having hard drive issues with 13" MacBook Pro barely a year old?

    Has anyone else been having hard drive issues with 13" MacBook Pro barely a year old?

    Yes, BUT...
    ... there are many problems that are really easy to eliminate by replacing the Hard drive, including ones that have nothing to do with actual Drive Hardware failure. These include corrupted install of Mac OS X, its EFI partition, clobbered partition tables, or the appearance of Bad Blocks in a critical area.
    Any of these problems can sometimes be eliminated by re-initializing the entire drive and writing Zeroes, and re-installing from scratch. The trouble is, this process takes hours to complete, and is not guaranteed to be successful -- you may still need a new drive after all that effort.
    I learned from my Plumber that consumers have no appetite for solutions that might work, and detest return visits for any related problems whatsoever. You or your friend may have had your drive replaced, not because it actually failed, but because the situation was troublesome, and the provider thought you would not tolerate anything less than a crisp, complete fix on the first attempt. And based on the cost of technician time, it may have even been cheaper that way.

  • Having start-up issues with my 1st gen Macbook Pro

    Hi everyone. I just started having start-up issues with my first generation Macbook Pro. It was working fine the other day when I last used it, but today I went to use it and it wont load up to my desktop...? It starts up (grey screen with the little swirly bar under the apple,) then it goes to a blue screen, then my background and dock appear, then (before any of my desktop files even show up,) it goes to a blue screen (that brightens up and then dims a little,) and it just keeps showing this with a little swirly progress symbol (shows when the screen is darker blue, then disappears when the screen is a brighter blue.) I've included a video that I took with my iPhone to show it situation. Any ideas as to what's wrong with it? Thanks in advance!
    http://youtu.be/oDCfHM-Zoes

    Safe Boot by restarting your computer while holding down the "shift" key.  Safe booting disables all nonessential processes, often times allowing you to start up when you would otherwise crash.
    As of OS X 10.5.6 Safe Boot deletes the dynamic loader shared cache location in the /var/db/dyld directory.  A corrupt cache here can cause the blue screen crash.  Once you restart normally, the cache will be recreated.  This should take care of the issue.
    http://support.apple.com/kb/HT1564
    http://support.apple.com/kb/HT1455
    Use Software Update to update your os to 10.6.8 and anything else that needs to be updated.

  • My iPod touch is having a little issue with the volume. When I plug in my headphones the volume works fine. When there aren't any headphones plugged in, no sound comes out from my iPod. When I go to turn up the volume, it still says headphones. Any tips?

    My iPod touch is having a little issue with the volume. When I plug in my headphones the volume works fine. When there aren't any headphones plugged in, no sound comes out from my iPod. When I go to turn up the volume, it still says headphones. I tried restarting it a few times, nothing worked. I looked up many tutorials, and still nothing did the trick. Any tips?

    - Try cleaning out/blowing out the headphone jack. Try inserting/removing the plug a dozen times or so.
    Try the following to rule out a software problem
    - Reset the iPod. Nothing will be lost
    Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset all settings
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup
    - Restore to factory settings/new iPod.
    - Make an appointment at the Genius Bar of an Apple store. Seems you have a bad headphone jack.
    Apple Retail Store - Genius Bar
    Apple will exchange your iPod for a refurbished one for this price. They do not fix yours.
    Apple - iPod Repair price                  
    A third-party place like the following will replace the jack for less. Google for more.
    iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens
    Replace the jack yourself
    iPod Touch Repair – iFixit

  • Any Invalid Serial Number Installation Issue With PSE 12 - PE 12 Windows or Mac ?

    http://forums.adobe.com/message/5711110#5711110
    Today I went from Photoshop Elements 12 and Premiere Elements 12 tryouts to the purchased boxed versions that came with two installation discs. One of the discs was for Photoshop Elements 12 and Premiere Elements 12 Windows and the other for these versions on Mac.
    On Windows 7 Professional SP1 64 bit desktop computer, I was hit with Invalid Serial Number for the installation of Photoshop Elements 12 which I did first. Tried 4X, double and triple checking to make sure this was not "user error". It was not. On the 5th try, the purchased serial number was accepted and the installation went to a successful completion.
    Tonight a friend alerted me to reports of similar happening for a lot of Photoshop Elements 12 Mac users. See the link posted at the top of my post.
    At no time did I see this problem with Premiere Elements 12 installation from the same disc as for Photoshop Elements 12 installation.
    Afterward, I installed these programs with the same installation disc on my laptop computer Windows 8 64 bit, I did not have any problems with either installation.
    At this time, I do not know if this Invalid Serial Number is elusive to Photoshop Elements 12 or not.
    If anyone is experiencing this problem with Premiere Elements, please let us know.
    From the link above, it would appear that Adobe is working on the issue.
    Thanks.
    ATR

    shikha
    Thanks for the reply.
    In my case, I had the network firewalls and anti-virus disabled when I did the installs of Photoshop Elements 12 and Premiere Elements 12 on Windows 7 64 bit as well as Windows 8 64 bit.
    I was fortunate in that a 5th try of the serial number entry for the Photoshop Elements 12 install on Windows 7 64 bit was successful, so I did not have to do the computer restart and retry of the install with the purchased serial number. But, good to keep in mind, just in case.
    It is ironic...last time around I got caught up in the Shared Technologies issues with Photoshop Elements 11 and Premiere Elements 11 on Windows 8 64 bit, not Windows 7 64 bit. But, in that case, I did find my way eventually to a successful install on Windows 8 64 bit. This time around it was Windows 7 64 bit where the glitch occurred, but, for me, only for Photoshop Elements 12.
    But, could you clarify...are you generalizing that Photoshop Elements 12 Mac Invalid Serial Number is due to server issues and Invalid Serial Number encountered by Photoshop Elements 12 Windows is  "online - due to some firewall or network issues"?
    Just getting prepared for if and when more questions on Invalid Serial Number might pop up in this forum.
    Thanks.
    ATR

  • Labview 2012 Installer builder issues with Windows 7 64 bit

    I have a clients project application program I am working on and am having a lot of trouble getting installed applications to work on Windows 7 properly. The Labview Installer sets the default installation directory to "c:\Program Files\" on Windows Xp and on Windows 7 64bit this defaults to "C:\Program Files (x86). When I install the application on Windows 7 and run it, because Windows 7 64 bit unreasonably protects this directory and every folder under it, if you try to write file to any subdirectory under it (like a reports directory), windows 7 will not let the file write to the directory and the file(s) disappear and you get permission errors. This has been difficult to address. Even logging in as administrator, I have difficulty changing the folder permissions. In addition, when I am in the file write process, if the default directory is coded to come up in the file Open/Save dialog, will not properly
    go to and display these protected directories. So thinking that OK, I'll just chage the install directory to something direct to the C: drive and not the Program Files (x86) directory, so I have better control of the folder permissions. Now the Installer build gives errors. It built, but the install fails. Looks like National did not test this for Windows 7 very well. I have run into just about every issue possible with Windows 7 and Labview. Clearly Labview was not very well tested with Windows 7 6 bit. I do not have the Internet toolkit added to the application, only the VISA 5.2 driver. Anyone else having application issues with Labview and Windows 7 and have ideas how to work around this?? 
    Attachments:
    BuildErrors.txt ‏11 KB

    It's no NI's fault and has nothing to do with 64 Bit either. It is something MS changed starting with Vista, namely tightening security of the whole system to a similar level as was usual on more professional OSes like Unix 20 years earlier. A user has not rights anymore to write into the location where applications are installed. This is for one reason to protect installed applications from being modified by malicious code.
    Instead every application should write its runtime data in one of the user writable loacations such as the user's Documents directory for data files, or in the user's or the machine's configuration directory for configuration settings. For single installations you could always set the directory which your application got installed into to be user writable by changing the rights of that directory afterwards but for applications that get installed on normal user computers this is a VERY hacky and discouraged move. Same about installing your application into the root of your system drive. I think it was an oversight by MS to not protect that directory too from user modifications, but was most likely unavoidable to allow DOS application installations to still work.
    LabVIEW has functions to retrieve a whole bunch of those preconfigured and user writeable locations and you really should change your application to make use of those locations, instead of trying to write into the installation directory or installing the application into the root location of the system drive, if you want to be compatible with Windows Vista/7/8.
    Windows 7 also requires for a number of actions such as installing programs or drivers so called elevated rights. This means that even if you are logged in as administrator you have to explicitedly provide the admin password again to be able to perform the action. This can be done by starting the program as administrator, when this is available in the right click pop-up menu, and is also sometimes done automatically for applications that Windows determines to need those rights such as setup programs for installations.
    Rolf Kalbermatter
    CIT Engineering Netherlands
    a division of Test & Measurement Solutions

  • Hey, I'm having a hardware issue with my Ipod Charger.

    Hello Apple community! I am having a issue with charging my 3rd Gen 64GB I Touch. I used to get an error where it wouldn't allow me to charge due to the accessory not being compatible to the i Touch (I used 3 different Apple Charger, Apple brand,etc) Now I can't charge it at all, its basically a broken Ipod. Im furious about this because I don't have a warranty despite this being a hardware issue. I went to look at Apple support but it said I had to pay $30 to call/email. I think thats ridiculous! I have an issue with my device and I should be able to call for FREE. Does anyone have any ideas on how I could get this expensive device fixed? I have no APPLE Store near me to go to.

    - Have you tried a reset. Nothing is lost
    Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Tried a different cable?
    - Looked at the dock connector on the iPod. look for abnormalities like bent or corrode contacts, foreign material and crack or broken plastic.

  • Having 2 small issues with 10.4.3 interface - shift click & control click

    I am having two issues with 10.4.3 on my mom's computer.
    1) I Control-Click the mouse and I do get a shortcut menu on the desktop, on icons, etc. How can I get this back? I can not seem to find a preference that sets this.
    2) I am in iPhoto and would like to select multiple film rolls (consecutive rolls) by clicking the first and then clicking the last one that I would like and it is working like I am comand clicking and only selecting the two rolls that I have clicked on and not the ones in between.
    Any help in how to work this out would be great.
    Happy Turkey Day!
    K

    1) I Control-Click the mouse and I do get a shortcut menu on the desktop, on icons, etc. How can I get this back? I can not seem to find a preference that sets this.
    Do you have any third-party items in:
    /Library/Contextual Menu Items/
    /Users/YourUsername//Library/Contextual Menu Items/
    If you do, try dragging them onto your Desktop and then retry control-clicking.

Maybe you are looking for