Having issue while uploading photos from PC to Iph

Hello,
I am having Iph4, recently I have started facing an issue when I upload the photos from PC to my Iph. Every time when I sync my iph with my PC photos, it is shows up two albums in my Iph...one with the name of photo gallery and other with the name of album which I uploaded from PC to Iph. Both the folders contains the same photos.
I am not able to understand, why it is getting saved twice in different folders in Iph. I also have the Ipad2, and when I have uploaded the photos to Ipad, then it is working fine, showing only one album that too with the same name which I uploaded from my PC.
Can anyone help what I am doing wrong here?
Shals

When you use iTunes sync you don't copy the photos into iTunes; you select the photos but you don't copy them into iTunes. The following has instructions: Sync photos to your iPhone, iPad, and iPod touch in iTunes - Apple Support
Other methods are to use a 3rd party app such as http://www.photosync-app.com/ or use Photo Stream My Photo Stream FAQ - Apple Support

Similar Messages

Issue while uploading data from flatfile to Transaction(VK13).

Hi All,
I am facing an issue while uploading the data from flatfile to the transaction(vk13). My flat file is as shown below.
SalesOrganization DistributionChannel Customer Material Releasestatus Amount Currency Quantity UOM ValidFrom ValidTo
2000 01 0010029614 AT309739 A 20.00 USD 1 PC 09/11/2014 12/31/9999
If I upload these data using the RV_CONDITION_COPY FM it is succesfully uploading to the relevant tables(konh,konp) but in the tcode VK13 I am getting all values fine, except UOM. Instead of PC it is showning as ***. I did not understand why it is happening please give an idea to solve my issue.
Regards,
Chakradhar.

Hi Raymond,
Thanks for your reply.Yes,If I use CONVERSION_EXIT_CUNIT_INPUT in my program the issue is, Assume If the user is giving PC as value for UOM field in flat file and upload the flat file.It is successfully uploading the value PC to the UOM field in transaction VK13 but the in the database table(konp) it is showing the value as ST.
Regards,
Chakradhar.

Computer is frozen while uploading photos from my phone

computer froze while importing photos, I cannot close out, or shut down because it says wait while photos are uploading to library.

Use Force-Suit from the -menu.

Issue while uploading data from R/3 production to BW production

Hi,
We are facing an issue as follows.
We are trying to transfer master data from R/3 Production server to BW Production server.
For the first time when we transfer data, upload is happening properly. But for the second upload - we dont get any error where as in the monitor data transfer shows 0 from 0 records and the status never changes.
But if we restart the BW production server and then upload data, it works fine for the first upload but the same issue from second upload.
Any suggestions please?
Regards,
Ram.

Hi,
Roberto - In ST22, there is no short dumps related to this issue. The issue is not specific for a single object. For eg. If i upload 0MATERIAL (after restarting the server) it works. Now I try to upload 0DIVISION (any object) it doesnot get uploaded.
Sriram - We are trying Full Upload.
Hari - I can see the records in RSA3 of the source system. The records are available and also they are extracted properly.
Shreya - Basis people are also involved and trying to find out a solution.
Manfred - Actually data is available. But the data doesnot get uploaded. So i guess changing the traffic lights settings might not help.
Regards,
Ram.

HT4890 uploading photos from iPhoto

I'm having no luck uploading photos from iPhoto to icloud. I followed the instructions. my accounts settings are correct. I even tried to drag the photos over manually. no luck. I have 25 gigs of space and none of it is used.

I'm having no luck uploading photos from iPhoto to icloud. I followed the instructions. my accounts settings are correct. I even tried to drag the photos over manually. no luck. I have 25 gigs of space and none of it is used.

HT1386 I AM HAVING TROUBLE UPLOADING PHOTOS FROM PC TO IPAD.

I AM HAVING TROUBLE UPLOADING PHOTOS FROM PC TO IPAD. I GET SOME PHOTOS UPLOADED AND THEN TRY TO ADD MORE.. AND ALL THE PREVIOUS ONES DISAPPEAR! THIS IS VERY FRUSTRATING. CANT I ADD NEW PHOTOS ONCE I UPLOAD ANY!

If you REALLY want to use the stock Photos (I wouldn't as it has major problems as is also explained both at http://www.iphonelife.com/blog/87/all-one-photo-viewer-roundup-70-price-drop-bes t-image-viewer and in the https://discussions.apple.com/thread/3812013?start=345&tstart=0 thread here - look directly at the first two messages), you need to ceate subfolders in parallel to the original ones. Then, the previously synched pics won't disappear.
But, again, I do NOT recommend using the built-in Photos. Using third-party apps like Photo Manager Pro is the way to go until Apple fix the issues with Photos.

Why am I having trouble uploading photos from iPhoto on mac after update

Why am I having trouble uploading photos from iPhoto on mac after update

Good day!
What does this have to do with Photoshop?
Wouldn’t the question better be asked on a Macintosh Forum?
Regards,
Pfaffenbichler

I am having no luck uploading Photos to Icloud from my PC ?

Hi
I am having no luck uploading Photos to my Icloud from my PC?
Can anybody help me

Make sure you check Photo Stream on the iCloud control panel for Windows. Then make sure you are uploading your photos by doing the following:
Photo stream supports jpeg, png, Tiff and most Raw formats, so make sure your file format is one of these. Then, to add your photos to photo stream, open Windows explorer, select Photo Stream under Favorites on the left sidebar,:
Click on Photo Stream, then to the right double-click on My Photo Stream. Click on Add Photos on the top the menu bar:
Select the photos you want to import, then click Open.

I am no longer able to upload photos from iphoto to Facebook. The "publish" button is now "grayed out." Any suggestions?

I am no longer able to upload photos from iphoto to Facebook. The "publish" button is now "grayed out." Any suggestions?

The window doesn't automatically pop up now. When you plug the card reader in, you should see a 4th option on the lower bar of the photos app. I think it says camera. Tap on that then you can see and inport your photos.
If you are still having issues, try giving your iPad a reset. Hold down the sleep and home keys until you see the silver apple. Let it reboot and try again. It won't hurt any data but can clear gliches.

Suddenly cannot upload photos from iPhoto to websites like ebay

I am attempting to create listings on Ebay and cannot upload photos from Iphoto like I used to. This happened on another website as well where I attempted to upload photos from Iphoto onto the site and it wouldn't work. I was able to upload to Facebook and use the pictures that way, but cannot do that for Ebay.
With the Ebay issue, I'm able to get to Iphoto by clicking on the browse button in Ebay, but when Iphoto comes up, it's frozen and I can't move the page at all. I'm have to "force quit" Safari to even be able to continue using the computer.
I am using a Mac Mini, Mac OS X Lion (Version 10.7.5). Safari is Version 6.1 (7537.71). All software is up to date.
Thanks in advance!!

Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Click the Clear Display icon in the toolbar. Then try the action that you're having trouble with again. Select any messages that appear in the Console window. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message (command-V).
When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some private information, such as your name, may appear in the log. Anonymize before posting.

DB Connect Load - "Unknow error while uploading data from the DB Table"

Hi Experts,
We have our BI7 system connected to Oracle DB based third party tool. The loads are performing quite well in DEV environment.
I would like to know, how we transport DB Connect datasources to Quality systems? Any different process to be followed for DB Connect datasources?
At present the connections between BI Quality and the third party quality systems are established. We transported the DataSource from BI DEV system to BI quality system, but on trigerring an infopackage we are not able to perform loads. It prompts - "Unknow error while uploading data from the DB Table".
Also on comparing the DataSources in DEV system and Quality system there are no fields in "Proposal" tab of datasource in Quality system. Also I cannot change or activate Datasource in Quality system as we dont have change access in quality.
Please advice.
Thanks,
Abhijit

Hi,
Sorry for bumping an old thread ....
Did this issue get ever get resolved?
I am facing the same one. The loads work successfully in Dev. The transport for DBConnect DS also moved in successfully.
One strange this is that DB User for dev did not automatically change to db user from quality when I transported the DBConnect datasource. DBCon DS still shows me the DB User from Dev in Quality system
I get "Unknown Error" whenever I trigger the data package.
Advait

I have uploaded photos from the past and they are grouped by dates. How do I seperate those photos into their own folder/album so that I can easily identify the contents. Also, what is the difference between Album, Smart Album and folders?

I have uploaded photos from the past and they are automatically arranged by date. As a result, there are many events grouped into one library/event/folder/album (not sure of the proper terminology) I'd like to separate them into folders/albums/smart albums so that I can easily identify the contents. How do I do that and do I delete the originals?

It would be good to take the tutorials and learn iPhoto - these are for the previous version but the concepts are the same and much of the command is the same - and it would be a worthwhile investment of time to take the iphoto tutorials - http://www.apple.com/findouthow/photos/ - they are very helpful and will save you a lot of time and frustration. - also the tutorials in iPhoto Help will be helpful - while iPhoto is easy and intuitive it does have a learning curve and it will save you time and pain if you spend a few minutes learning the basics
as to organization - events are generally time based and are the basic automatic organization - you can merge and split them to make them work better for you but they are not a good way to do detailed organization - best to leave them time based
albums are logical things that contain photos and are just pointers to the photo in the event so they take no extra space and all changes to a photo anywhere are reflected everywhere
Smart albums are the same except they are automatically filled based on the criteria you set when you create them
Folders are containers that you create and a folder can contain albums, smart albums or other folders so they are a big help in organization - like a vacation folder that holds folders for France, USA, China with each of thos folders holding albums of photos from the country
LN

When I upload photos from my Canon Rebel 1000D to iphoto the images are labelled JPEG, yet I shoot in RAW.How do I get iphoto 11 vers9.1.3 to not convert the photos to jpeg.

HI,
When I upload photos from my Canon Rebel 1000D to iphoto the images are labelled JPEG, yet I shoot in RAW.How do I get iphoto 11 vers9.1.3 to not convert the photos to jpeg. I seem to have tried and read so much but just can't figure it out. How do I get iphoto 11 vers9.1.3 to not convert the photos to jpeg. Or do a have to use a different system? I have Adobe Bridge. Or can I upload directly into photoshop?
Also how do you install dmg's properly I am having problems installing them?
I have a Mac OS X 13 inch Version 10.6.7
Advice desperately needed
Thanks
Nlouis

Do you have Aperture installed? I found your model on a compatibility list; however, there was a note that it requires Aperture 2 to be installed:
http://www.apple.com/aperture/specs/raw.html
According to this excerpt:
To see a list of digital cameras with RAW-format support that are compatible with iPhoto, visit this Aperture webpage (any camera compatible with Aperture, Apple’s advanced photo editing and management program, is compatible with iPhoto as well)
which is at the bottom of this page:
http://docs.info.apple.com/article.html?path=iPhoto/9.0/en/pht41627265.html
I may be wrong, but I interpret that info to mean you need Aperture 2 before iPhoto will work with RAW?

Uploading photos from iPhoto to Walmart

http://discussions.apple.com/thread.jspa?threadID=1570825&tstart=147
I read the above thread and it is noted as solved, but I disagree. My mother has brand new Mac Book Pro with iPhoto 08. I have a iMac with iPhoto 08. When we go to upload photod to Walmart.com using the upload tool, my mothers new Mac Book Pro has the IPhoto library as a "place" to upload photos from... my iMac does not have that option. Both using same version of the software.
I have screenshots to post but can not find a way to post here.
anyone have this issue?

For accessing photos for use outside of iPhoto read Terence Devlin's treatise on file access.
TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto (iPhoto.Library for iPhoto 5 and earlier) database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
I've created an Automator workflow application (requires Tiger or later), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. It's compatible with iPhoto 6 and 7 libraries and Tiger and Leopard. Just put the application in the Dock and click on it whenever you want to backup the dB file. iPhoto does not have to be closed to run the application, just idle. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.
Note: There's now an Automator backup application for iPhoto 5 that will work with Tiger or Leopard.

Apple, please may you put the ability to upload photos from your photo album directly to Facebook in the iOS5.0.2 update?

Hi apple, I was wondering if you could in the iOS5.0.2 update or the update after that, give the ability to upload photos from your photo album directly to Facebook without having to plug your iPod, iPad or iPhone into your computer.

Apple does not monitor these forums for suggetions. To make a suggestion to Apple go here:
Apple - iPod touch - Feedback

Having issue while uploading photos from PC to Iph

Similar Messages

Maybe you are looking for