Having issues printing to video from fcp 5.1.4 to my hv20

I had unaltered, raw 1080i60 footage i shot and now i need to get it on television at 640x480 4:3 letterboxed. I feel like I've adjusted all the correct settings yet I'm still having issues. I have my hv20 connected via firewire and set to play mode. I go to print to video, have 30 seconds of bars and tone and no video shows up on the camcorded - only sound. After the bars disappear I the first few seconds of the video play before it reports an ett/ptv dropped frames error. Why is this happening and why can't I get video to come into the camera?
So. Frustrating.

Search is thy friend si thi:
http://discussions.apple.com/search.jspa?search=Go&q=hdvprint+tovideo

Similar Messages

I updated my ipad1 thru iTunes from 4.2.1 to 4.3.5 and now having issues, especially playing videos. Anything I should know. I have not jail broken my iPad and don't want to.

I updated my ipad1 thru iTunes from 4.2.1 to 4.3.5 and now having issues, especially playing videos. Anything I should know. I have not jail broken my iPad and don't want to.

you update it by connecting it to a computer running itunes and starting itunes up on the computer clicking on it in devices and clicking on the update button in the content menu
if it say you have the latests then it's because you don't own an iphone 3gs but an iphone 3g where the version 4.2.1 was the last released
in that case you can't ever update it
http://en.wikipedia.org/wiki/IOS_version_history#Current_versions

I am having issues with streaming music from iTunes on my MacBook Pro to my audio system through AirPlay. Works perfectly with my iPod Touch. The AirPlay icon appears irregularly in iTunes and when selected doesn't connect. Running latest IOS software.

I am having issues with streaming music from iTunes on my MacBook Pro to my audio system through AirPlay. Works perfectly with my iPod Touch. The AirPlay icon appears irregularly in iTunes and when selected doesn't connect. Running latest IOS software.

Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Unsync all music and resync
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar
You said:
No, I do not want to "factory reset" my iPod. No I do not wish to do anything crazy long or hard to fix this.
That may be necessary, It is not what you want to do/not do but what is required to resolve your problem.

I am having problems playing my videos from my iphone on my laptop

I have an iphone 5. I have not yet updated to ios 7. I am having problems playing my videos from my iphone on my laptop. the sound is jumpy and the playback is slow/jumpy. i have tried various players but none seem to be able to play back properly. Help!

Hello Bagpus113
Check out the article below to troubleshooting issues with the sound for music and for videos. One other thing you can try is to convert the songs to a different format
iTunes and QuickTime for Windows: Audio does not play or plays incorrectly
http://support.apple.com/kb/TS1362
Troubleshooting iTunes for Windows Vista or Windows 7 video playback performance issues
http://support.apple.com/kb/ts1718
iTunes: How to convert a song to a different file format
http://support.apple.com/kb/ht1550
Regards,
-Norm G.

Problem with Print to Video in FCP 6.0

In the past I have been able to print to video with FCP 5, now not working with FCP 6. My Sony HVR A1U is seen by FCP, I can log & capture no problem. When I go to print to video, the sequence does not show up on my camera LCD and I cannot capture it. I have checked the system profiler and under firewire the camera is listed. In the print to video window I have checked Automatically Start Recording, but this has no effect.
Thank you for your advice

Just curious. How do you get your computer too see the HVR. I am using I movie HD and it does not see anything. Is there a camera setup procedure? I looked at the vague manual which was no help.
Thanks in Advance
Thom

Can the exported video from FCP X play in WMV?

(1) Can the exported video from FCP X play in WMV?
(2) If not, can I convert with the help of Compressor 4 to make it to play in WMV?

No to both. You need third party software to create WMV. Telestream has tools for this.

Exporting video from FCP scrunches it.

When I export my video from FCP it gets scrunched. Imagine that you start with a square and you export it and it comes out like a vertical rectangle. It looks correct in FCPs image and wireframe box, but it is not correct according to the title safe boxes. When I play the exported video it includes black space on both sider of the video. What can I do? I set the Motion project presets to NTSC DV (720 X 480) and FCP sequence settings to NTSC DV (3:2) (720 X 480) and I don't have the Anamorphic 16:9 checked. How can I export this without scrunching or squeezing it?

Welcome to the family.
You can only go through your settings very carefully, one at a time. If the sequence is DV, the clips are DV, and the export is DV, the resulting file will be DV. Our experience around here is this question is 99.9% user error caused by the fact that FCP's various settings are weirdly conflicting with common sense or other parts of the process.
Good questions to answer: Why are you exporting out of FCP and where are you viewing this exported file?
bogiesan

I am having trouble with downloading videos from my Sony HDR-XR160 video camera. iMovie doesnt open up when i connect the camcorder. any suggesions?

i am having trouble with downloading videos from my Sony HDR-XR160 video camera. iMovie doesnt open up when i connect the camcorder. any suggesions?

Looking up your camera online, I found it is capable of 1920 x 1080 Full HD 60p Recording. It's the 60p (60 frames per second Progressive) that's the problem I think. iMovie '11 will do 60i (Interlaced). You might need to convert it from the format the camera currently uses into another format to get it into iMovie. Read more about it on this link here: How to import 60p footage From that message thread comes the recommendation to use ClipWrap to convert the camera's video clips now that they are in 60p:
Tom Wolsky
Re: How to import 60p footage
Aug 17, 2011 12:40 PM (in response to ptburnett68)
Use ClipWrap to rewrap to QuickTime. Import the files. Edit in either 59.94 or 29.97. The latter if you want to use the high frame rate for slomo

Having issues updating Bootcamp drivers from 11.1 to 11.7

having issues updating Bootcamp drivers from 11.1 to 11.7
No matter what driver I have tried thus far
it does not install or update the drivers
Battlefield 3 nags you about having 11.1 and needing to update.
However this game proceeds to load using these drivers (11.1 )
I recently bought NFS THE RUN.
Unlike BF3 the game does not proceed therefore inorder to play this game i would need 11.7 or higher.
can someone please provide the driver that actualy installs and works.
My specs are MBP 15 inch
1 gig GPU ( AMD Radeon 6750m)
8 gigs on Ram
2.2 CPU i7

Take a look around my bookmarks
you are updating AMD, not Boot Camp drivers.
you need to uninstall first.
probably need to update via Device Manager not via Install from AMD
The 99% leaving out import 1% support to make Windows on Mac work 100% seamless

I am having trouble moving a video from iTunes on my PC to my iPod (4th gen).

I am having trouble moving a video from iTunes on my PC to my iPod (4th gen). Is it a problem that it is in the "Home Videos" section? I go into the "Home Videos" sections and drag the video that I want so that the bar comes up, move it over to the device and let go. All that happens is it flashes a few times and then nothing. No error or anything.

Putting Your Videos on your iOS Device
http://macmost.com/putting-your-videos-on-your-ios-device.html

Panasonic VDR-D100... having issues importing home videos!

Hello,
I am having problems importing home videos from my Panasonic VDR-D100 camcorder onto my computer - any suggestions? Do I need additional software or maybe I'm just doing something wrong?
I am connecting my camera via USB then turning it on, opening up iMovie and nothing comes up! Any suggestions would be greatly appreciated.
Thanks in advance for your help!
Jen

This may seen like a stupid question, but is the camera set to "Play"? And does the screen show the words "USB Connected" or something to that effect?
Also, after everything is connected have you tried navigating to the File menu and selecting "Import from Camera..."?

Is anyone having issues with ink leaking from the printer head area? hp officejet pro 8000

HP Officejet Pro 8000 Wireless, Windows 7 64-bit. Printer is leaking from the printer head area. The problem doesn't seem to be coming from the heads but maybe another connection?????

docrobin
I would suggest you called into HP Technical Support for repair options as you may have a hardware issue.
Here is the link to contact options for laptops purchased in the US.
Here is the link to contact options for laptops purchased outside the US.
Please feel free to re-post if you have any further questions or concerns.
Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
Dunidar
I work on behalf of HP
Find out a bit more about me by checking out my profile!
"Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter

Having trouble importing mpeg videos from an external hard drive to iMovie or iPhoto. Keeps saying unrecognizable format. How do I get it to work?????

I have always had a dell computer. But after the 3rd crash, we decided to throw it out and get a mac. We bought this computer a week ago. I was able to save all our family pics and videos from the dell to an external hard drive. So when I got the new Mac set up, I plugged the hard drive in and had no problem importing all our pictures. But when I tried to import our videos, I ran into some problems. We have had 3 different cameras with each having a different video format. All our videos are either avi, mpeg, or mov. All the avi videos imported successfully but the others will not. I tried importing them into imovie and iphoto and neither one will recognize the format. iphoto says unrecognizable format and imovie just completely freezes and I have to force quit. Here is what is funny. I took the hard drive to my local store and when they hooked it up to their computer, they imported beautifully. Why won't it do the same for my brand new computer? Thanks!

I have always had a dell computer. But after the 3rd crash, we decided to throw it out and get a mac. We bought this computer a week ago. I was able to save all our family pics and videos from the dell to an external hard drive. So when I got the new Mac set up, I plugged the hard drive in and had no problem importing all our pictures. But when I tried to import our videos, I ran into some problems. We have had 3 different cameras with each having a different video format. All our videos are either avi, mpeg, or mov. All the avi videos imported successfully but the others will not. I tried importing them into imovie and iphoto and neither one will recognize the format. iphoto says unrecognizable format and imovie just completely freezes and I have to force quit. Here is what is funny. I took the hard drive to my local store and when they hooked it up to their computer, they imported beautifully. Why won't it do the same for my brand new computer? Thanks!

I'm having problem with exporting video from premiere pro cc 2014

I'm using Adobe Premiere Pro CC 2014 and I'm having problem with exporting video.
When I click Export and media, the window for exporting appears and it starts exporting video.
But after a few minutes, it looks like it has completed exporting video and says there's a bug in exporting.
It literally says it has a problem with compiling, but I don't know what the real problem is.
I tried many things like restarting computer and Premire Pro but it's no use.
But it works when I use Adobe Media Encoder CC 2014 for exporting video.
If anyone knows any possibilities about why this problem happens, please let me know.

I'm having a similar issue. When I go to export my project, I add it to the render queue, set it up with the h.264 settings that I've used with countless past versions of the program, and then hit render. Randomly, at some point in the process, the render just stops and the ETA just keeps climbing. I actually had to save an XMF file of the CC 2014 project and bring it into the previous CC version of Premiere just to finish it. Even a clean re-install of CC 2014 doesn't work.

Wanto output video from FCP to tv-monitor..

I've been searching for an answere in this forum aswell as PD150 forums..
Please help, I think of myself as a logical person but just can't figure this one out.
I try to output the video signal from FCP to a tv-monitor usin a Sony PD150 in the middle.
That is; Firewire from my G4 into my camera, s-video to scart into my monitor.
I've been fiddeling with the camera settigs but found nothing that indicates signal in/out or likewise.
I know that this isn't a PD150 forum but i thought I could find someone experienced here.
Thanks for answeres in advanced, Erik

#8 External Monitor Viewing.
Shane's Stock Answer #8:
A simple path is mac > firewire > camera or deck > rca cables > tv
Then start up your camera and tv, then open fcp.
Then go View > External video > all frames
Video playback should be Apple firewire NTSC (If you are using an NTSC set)
Audio playback should be Audio follows Video
Techinially, this should send synched video to your TV
If for some reason you can't view your timeline on your external monitor, there are a few things to try:
1) Make sure that the camera/deck is connected and powered on BEFORE you open FCP.
2) In the Final Cut Pro menu select AUDIO/VIDEO Preferences and make sure your signal is being sent out thru Firewire DV.
3) Go to the menu and select VIEW>EXTERNAL>ALL FRAMES.
4) Click in the % box above the image and select FIT TO WINDOW.
5) Go to VIEW->refresh A/V devices
6) Make sure the Log & Capture window is closed
If you want it to play in both the canvas and the external monitor you need to go to the FINAL CUT PRO menu and select AUDIO/VIDIO settings and make sure MIRROR ON DESKTOP is selected under the PLAYBACK OUTPUT section
Shane

Having issues printing to video from fcp 5.1.4 to my hv20

Similar Messages

Maybe you are looking for