Having issues when adding transitions to FCP7

Hey, I'm editing a short film and I've been having some issues whenever i add in a transition (cross/dissolve) to any of the clips and go to play them back it has a glitch, not very familiar with FCP a complete newbie at this..Tried exporting it out to qt and the glitches got even worse...it totally freezes up and throws off the audio track completely or it will stay frozen but the audio keeps playing. I'm fairly new to this program and so i may not have the correct terminology but could really use some help.. This is my final project for graduation and right now i'm pretty stuck any help would be greatly appreciated. I included a few screen shots to explain what actually happens as the video plays out. Oh before I export it when i'm working on it on FCP it doesnt look that bad, it just kinda jumps a bit when the scene with the transition plays.

Hi
thanks for your response, sorry I hadn't responded but it worked and it's now working perfectly again. TY

Similar Messages

Final Cut Pro X crashes when adding transitions, throughout the entire program.

I've had FCP X installed for a few weeks now, and I decided to hold back asking my question and see if anybody else is experiencing the same problems.
I did find one matching problem on the discussions forum, but the user found a solution which I tried, and did it did not work.
Everytime I try to add a very simple transition to my video in Final Cut Pro X, it gives me the spinning colorwheel, hesitates for a few seconds and then crashes.
It only does it with transitions, I can add effects, adjust color, etc. but only when adding transitions does it crash.
I've tried deleting events and original media, I've reimported using optimized media, I've tried both ways of keeping files in original locations and also copying to final cut events folder.
The video I'm using is full 1080p mov files from a Canon 5D Mark II.
It does it in the timeline as well as the secondary timeline.
I've tried the solution that the previous asker did, which was copying the content to another FCP event, and it didn't work for me. Still crashes whether I try to drag the transition to my timeline, use the keyboard shortcut, or double click.
I have a Early 2010 15 inch MBP i5 with 8gb of RAM running newest version of Snow Leopard.
Hope I've provided enough information
Thanks,
-Jon

Same Issue: Added a transition and then beach ball from **** and crash. Also lost two hours of work when it restarted and reverted to the last planned quit.
FCPX is benched until Lion and updates. Don't have time to be a beta tester on what might end up being a hobbyists toy.
MacPro Quad 3.0, 10G RAM.
Mark

I am still having issues when visiting a website and then selecting the back icon and going to days old data instead of current. How do I fix this?

I am still having issues when visiting a website and then selecting the back icon and browsers is returning old data instead of current. How do I fix this?

found a solution thank you firefox live chat!!!

HT1933 Anyone having issues when Reporting a purchase ?

Is anyone else having issues when clicking in Report a problem link it it default back to the main screen? I have 4 unauthorised purchases on my account totalling over $350 and i need this rectified ASAP!

Apple checked the phone and it checked out ok fine. This issue happened only twice (just before I took it to Apple). It has not happened since. I was told that it was probably NOT a heat issue because I WOULD get a message on the screen warning me about heat. I have never received such a message but co-workers have.
Anyway, seems to be gone whatever the issue was. Now I have AirPort Extreme issues. Appointment made.
Thanks!
JMB

I am having issues when I shoot raw + jpeg. Raw files seem corrupt!!

I am having issues when I shoot raw + jpeg. It seems the raw files get corrupted. I have shot raw without an issue. It is only when I shoot raw + jpeg. The raw files will not show in Photoshop elements. I installed the Canon software and was able to see all the raw files; however, I noticed that when I tried to view some full screen they would not show. I also noticed that these raw files look block-ish. They appear more digital looking. Is there a specail card needed to shoot raw + jpeg? I formatted the ones that I have prior to using them.
Solved!
Go to Solution.

While it could certainly be a card-reader problem, data corruption of any kind can be any of the following:
1) the card
2) the cable (if used)
3) the card reader (if used)
4) the computer RAM,
5) thecomputer hard drive (or SSD)
A failure of any one of the above will result in corrupted images when viewed. Since it seems to be RAW file related, as they are signifantly larger than JPGs, it's likely anything but the card reader or cable.
The only way to 'beat it' is eliminate each of the possibilities, starting with the easiest/cheapest fix.
1) Use the cable. If that solves the problem, replace the card reader.
2) Use a different card. If that solves it, toss the old card.
3) If multiple sticks of internal computer RAM, swap them. If that fixes it, or, the problem 'moves' to other images, replace the RAM. It could be only 1 of 2 sticks bad, though, so use only 1 of the old sticks for a while to see if the problem recurs.
4) If you have multiple hard drives in your computer, or an external one, use that to store the photos for a while. If the problems go away, it's the drive. Note that hard drive failures typically start slowly and increase gradually. On occassion, though, your computer won't boot and it's all over. If you are down to thinking it's the hard drive, it's time to get a good backup...NOW!
For what it's worth, I had a similar problem with corrupted photos. Both RAW and JPGs were affected. But as the problems were after having loaded and initially viewed them on my HD, I knew it was a computer problem. It dogged me for a couple of weeks. I even played swap the memory sticks, pull one out and run on one only, swap the one for the other (running on one), and it STILL kept happening. I finally gave up and replaced both sticks of RAM. That solved the problem. So much for lifetime warranty from Hong Kong. A very well regarded brand of RAM, no less. My SSD drive was the next one on the list, it the new RAM didn't solve it.

HT1349 Having issues when try to burn a disc. It says "checking media" but just sits there. I know drive is working because I can put in a purchased cd and can import it into my library. It said something about I should "calibr

Having issues when try to burn a disc., which I never had an issue doing. Yesterday when I tried to burn a playlist it says "checking media" but just sits there. I know drive is working because I can put in a purchased cd and can import it into my library, but now it just sits there and hums until I maually eject the disc.Before all this started it said something about that I should "calibrate disc", since then it won't let me do any burning. I can't find any options in " preferences to change anything except the burn speed. Any suggestions? Tried rebooting, tried using my wifes iTunes on same comptuer.

Could you post your diagnostics for us please?
In iTunes, go "Help > Run Diagnostics". Uncheck the boxes other than DVD/CD tests, as per the following screenshot:
... and click "Next".
When you get through to the final screen:
... click the "Copy to Clipboard" button and paste the diagnostics into a reply here.

Having issue when we try to print more than 300 container labels

Hi Gurus,
We are having issue when we try to print more than 300 container labels. Once it reaches 300 it starts to jump the sequence and we are not able to complete all the tickets if itu2019s more than 300.
Regards
Rajib Pathak

dear friend,
first, i recommend to analyse the spool request and discuss it with your basis/technical guys (use SP01)
second,
you would try to run t-code SPAD for your output device and check out the checkbox "Process requests sequentially" (ON)
regards,

IMovie crashes when adding transitions

I just bought an intel core 2 duo iMac with iMovie HD 6 it has 1GB memory and 189 GB of free space on the hard disk. Everytime I try and add a transition between two photos, specifically the overlap transition, it crashes. The kens burns effect has also stopped functioning correctly (it jumps around). I have tried everything suggested on the discussion boards to correct the issue:
- verified and repaired the hard disk
- cleared caches using OnyX
- shut down iMovie, deleted com.apple.iMovie.plist file, then restarted
- got rid of all third party iMovie and Quicktime plugins
- re-started the project 4 times
- called apple
- also, the movie is not saved on an external hard drive
Nothing has work so far. iMovie still crashes immediately each time I try and add a transition. Any suggestions? Thanks in advance.
iMac Mac OS X (10.4.7)
eMac Mac OS X (10.2.x)

I hope you don't mind my jumping in and adding to the muddied waters, but I am also having trouble with iMovie transitions. I just bought the MacBook Pro - 200 gig hard drive with boosted RAM. I have experienced the following problems:
1. After reading Karl's caution about iMovie trash, I don't empty the trash until the project is completed, so that's not the issue.
2. And this is what's odd . . . I just put one movie together and had not a single glitch. I pulled stills in using Ken Burns, was able to go back and edit the clips, change transitions, etc.
3. I have another movie that I have been working on and it was going fine UNTIL I added the first transition. After that, whenever I select a clip I get a black screen and have to reimport the photo to see it.
4. When I try and add transitions, sometimes they work, sometimes nothing happens, sometimes the system crashes, and sometimes it looks like it is going to render, but the rendering line never progresses.
5. I have tried deleting the plist files for both iMovie and iPhoto, and repairing permissions, but it doesn't work.
6. No security features are turned on.
7. I do have slick transitions, but as I said, they worked fine in the first movie (where trash was never emptied.)
This is making me crazy and is far too time consuming. Karl, any thoughts?
Thanks so much.

Flash - Issue when adding scenes/keyframes

Hi, very new to flash,
Basically I have an existing site which is built in Flash CS6, each page is built on a single layer with one frame and is embeded into an HTML document.
What I am trying to do is add a preloader to this sites pages, I have no issues in adding the preloader and code to make it work.
What I am having issues with is when I add either a new scene or keyframe to put the preloader on, the images I have on the main scene/keyframe become very distorted after publishing.
I have played with the publishing output settings i.e JPG vs PNG, and done a thorough search online but cant find anything.
Any help would be much appreciated..
Thanks

Any help would be appreciated ..

REMSH unix command issues when adding rule for port 514

Has anyone experienced any issues with Unix systems when adding rules to WAAS for port 514? This is the port RCOPY uses and is not handled by WAAS by default. We created a rule for port 514 but when we implement any type of optimization (even TFO Only) we start having problems with REMSH. This is used in one of our production scripts that normally take 10 minutes to run. When we apply the rule for port 514 the time goes as high as 45 minutes.
We wrote a test script that uses just the REMSH command and with out the 514 rule works fine but with the 514 rule goes down the tubes.
Just to add a little more information, I do not see an entry under Monitor/ Connection Statistics with the servers in question when the test script is running so am not sure where to go from here. I know there is a way to do a TCP capture from the WAAS so figure that will be the next step to see what is causing the issues.
Thoughts?? Ideas?? Suggestions??

Well TAC came back with a answer. They found other people with the same issue.
"It was found that the applications always used the same source and destination TCP ports. WAAS has the first connection in a "WAIT-CLOSE" state so when the next packet comes in with the same ports it is dropped." , "A defect was opened for this issue, but has not been fixed yet."
He wanted us to do a packet capture but after finding these other tickets decided it would be a waste of time and only tell us we are having a similar issue as others.
Still waiting on a suggested work around or a patch, 4.15 is suppose to come out soon but haven't heard if it will fix the problem.
With the new information I don't think even putting 514 in pass-through will fix the issue.
I will let you know if I hear anything else.

Anyone else having issues when streaming from veetle using safari over wifi?

I like many others have been having issues with my wifi on my iPhone 5 (sometimes when connected to wifi it just freezes up and I need to do a reboot or reset network settings to get it back up and running). In any case, that wasn't bothering me too much but I've noticed now that the veetle web site that I use sometimes to stream shows from on my iPhone stops showing video after a few seconds when using wifi. If i switch to my LTE connection or 3G it works fine but it's only when running with wifi that it has a problem. It will begin to stream a show properly then after a few seconds the video will cut out though the sound keeps playing. My iPad doesn't exhibit the same problems and can stream from veetle perfectly over my wifi. Anyone else out there having similar issues? This will be annoying if i'm travelling out the country and depending solely on wifi for my data and not being able to stream sports and tv shows from Veetle. Just wanted to see how commonplace this problem was. Thanks

All spring and summer Netflix/fios has been a problem. I have used a tool that goes beyond simple speed tests and gets to dividing up thE problem. It appears that the problems reside with fios, however true to form Verizon repair denies any problem (go figure) .

I'm having error when adding a credit card

When adding a new credit card i'm having this error:
30225-dUmyRAAAAAAAAAAA-85fcf2e9-5dda-4dbd-9760-524ba8262578
I am contacted the Billing Support for
further help and he said that a part of this amount is taken. what happend ?? why you take my money and not active my dev account ??

Hello IRAQIIENG,
The error that you are receiving is related to 1 of 2 things.
Either you do not have the card setup to make payments over the internet or the card is not an acceptable card type.
If you have previously made purchases online with this card then it means that your card is not accepted by Microsoft as a form of payment.
Please use a different card and try your payment again.
If you still have questions please contact Dev Center Support.
-Miles
Windows and Windows Phone Dev Center Support
Send us your feedback about the Windows Platform

Final cut bug, interlacing when adding transitions

Hello
So I have been experiencing a problem in final cut pro 6 when generating a timeline using motion jpeg A and using transitions that all clips end up looking interlaced. The fields in the sequence settings are set to non and all the settings are at high quality. All preferences and settings have been checked a hundred times over. Even soemtimes in the past generating a new sequence and copying your timeline to the new sequence would sometimes resolves some problems.
After weeks of banging my head against the wall I managed to find out that importing quicktimes into final cut would default the field on every quicktime to upper odd, causing this problem. Changing this option to none seemed to fix the problem. In saying this, this is not ideal as if you were working with say 40 quicktimes or more you would have to manually change each field to every quicktime before you start your timeline. Not good.
Has anyone else experienced this problem and if so have you found a better way around it?
Thanks

Same Issue: Added a transition and then beach ball from **** and crash. Also lost two hours of work when it restarted and reverted to the last planned quit.
FCPX is benched until Lion and updates. Don't have time to be a beta tester on what might end up being a hobbyists toy.
MacPro Quad 3.0, 10G RAM.
Mark

I am having problems when adding mp3

So when I sync the whole ipod touch, it's fine, but when I try to sync music or manually add music, i get some error windows.
When I first got the ipod in Jan2010, it was fine when I manually added mp3s, but recently I tried to add more music, it wouldn't allow me to.
I tried restoring to factory settings and restore from my back up, it didn't help.
I disabled my anti-virus (CA), still having trouble adding mp3s manually or syncing.
Everything else related to syncing works.
I tried my other ipods for this current PC and I was able to add music to those, but still not with the ipod touch.
http://sehanafortress.com/help/ipoderrors_201005may0001.jpg
http://sehanafortress.com/help/ipoderrors_201005may0002.jpg
http://sehanafortress.com/help/ipoderrors_201005may0003.jpg
http://sehanafortress.com/help/ipoderrors_201005may0004.jpg
http://sehanafortress.com/help/ipoderrors_201005may0005.jpg
Windows XP
iTunes 9.1.1.12
ipod touch 3.1.3
Thank You
Message was edited by: sehana

Many thanks.
Okay ... swinging into "basic principles" troubleshooting mode. I'm suspecting most strongly either a damaged pref file or library file here. If that's what is going on, then these errors should be specific to a single Windows user account on the PC (because there's a different set of iTunes preferences files and library files for each different Windows user account on the PC).
So I'd like to do a little experiment to check to see if this is a user account specific or system-wide problem on the PC.
Quit iTunes if you have it open. Head into your User accounts control panel. Create a new user account with full administrative rights.
Now log out of your usual user account and log into the new account. (Don't use fast user switching to move between accounts.)
Launch iTunes in the new user account. The iTunes set-up assistant will run. Don't add any files to iTunes when prompted to do so ... just let iTunes eventually launch to an empty library.
Now in iTunes go "Edit > preferences". Click the Devices tab. Make sure the "Prevent iPods, iPhones and iPads from syncing automatically" checkbox is checked and then click OK.
Now add a small number of mp3 to the new empty library. (Preferably, make them files that have transfered successfully to the ipod in the past.)
Now try attaching the iPod. Do not associate the iPod with the empty library. Now try checking that "manually manage" setting.
Attempt to do a manual transfer of the mp3s to the iPod from the new library. Do they transfer across without the error messages?
Now add a small number of the files that haven't synced successfully to the iPod (in the usual user account) to the iTunes library in the new account. Again, try a manual transfer of some of those files to the iPod. Do those transfer without the error messages?
(If both types of manual transfers take place without errors in the new account, that strongly suggests we should try to fix any library file or pref file issue in the usual account. If just the new mp3s refuse to transfer, then I'd be suspicious about a problem with the files themselves. If both types of files refuse to transfer, that would tend to rule out a library file or pref file issue, and we'll start checking on other possible causes of the issues.)

Missing audio in Video when adding Transition

Hi!
I'm new to flash 8, and trying to learn video playback in
Flash, and I have one question: I've added a transition effect
between 3 videos, and when I play the swf file, the audio is
missing in the 3 video's.
Is it so that audio automaticly dissapear when I add
transitions?
Thanks for any answer...

My actionscript is below, if that helps anyone. I don't know
if this is a stupid question with an obvious answer, if so please
let me know:-)

Having issues when adding transitions to FCP7

Similar Messages

Maybe you are looking for