Having Issues with High CPU Usage with fluxbox & pekwm

Greetings,
I have searched for this issue and it seems that something similar has happened in the past with an old xorg, and it seems that someone is having a similar issue that they can point to kde as being the culrpit. However in my case, this is a fresh install and is not using any kde libs. Please allow me to explain the issue.
The power supply on my main computer finally gave out, and being incredibly poor at the moment I can not yet replace it. So, I pull out an older computer that I had once set up for my kids, but took it away from them when they were abusing it. I always make backup dvds and such monthly so I didn't have to worry about any lose of data, however I desired to keep my larger hard drives from my main computer. After testing to ensure that the hard drives were fine, I did some minor surgery, and did a fresh install of arch linux onto my back up computer. Since I prefer pekwm, I installed pekwm as my wm of choice, and outfitted it quickly with mpd+sonata, firefox, pcmanfm, and tint2. Then I rebooted into my pekwm 'desktop'.
It was running sluggish. Firefox was easily maxing the cpu up and beyond 100% and it felt ten times worse than any heavy DE I used in the past. I checked to make sure I had the right video driver installed. As this computer runs a 64MB nVidia GeForce2 MX with TV out video card, I searched nvidia's page and the arch wiki, noting that the driver needed is nvidia-96xx. Well I had already suspected that during install, and thus had installed such driver. I double checked my xorg.config and it has the right driver listed.
So I checked out some lighter browsers. I tried both Midori and Iron (which is similar to Chrome but without google spyware or whatever). Well both run better than firefox, Midori being the lightest one, but Iron quickly being my favorite. Still, the problem remained. Moving windows caused cpu spikes, opening more than one tab, or more than one program caused cpu spikes and the computer to slow down and sputter, freezing at times.
So I tried out another wm, fluxbos, which is another of my favorites. Seemed somewhat better but only fractionally, which I consider odd because pekwm has always seemed snappier than fluxbox to me in the past. Running lxtask (still mouse dependent, sorry lol), I was able to take note of the following...
FLUXBOX
lxtask 6% CPU usage average
PCManFM 5% CPU Average
Fluxbox 1% to 2% cpu usage
gksu 3% cpu usage
pidgin 3% to 7% cpu usage
firefox up to 62% cpu usage
midori up to 38% cpu usage
iron up to 50% cpu usage
mpd 11% cpu uage
Xorg (with no window movement) 2% cpu usage
Xorg (moving windows around) up to 80% cpu usage
PEKWM
lxtask 6% CPU
pidgin 7% cpu
tint2 1% cpu
pekwm 1% to 5% cpu
pcmanfm 7% cpu
firefox up to 85% cpu
python 1% cpu
midori up to 38% cpu
iron up to 25% cpu (odd...)
Xorg (with no window movement) 1% cpu
Xorg (when moving windows around) up to 80% cpu
Both were using around 118 MB RAm and weren't yet touching swap. As I see it I am  thinking xorg  or video driver related, yet I already made sure that I had the correct video driver. Here's my Xorg.conf
# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig: version 1.0 (buildmeister@builder63) Thu Jun 25 18:57:07 PDT 2009
Section "ServerLayout"
Identifier "Layout0"
Screen 0 "Screen0" 0 0
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "Mouse0" "CorePointer"
EndSection
Section "Files"
EndSection
Section "InputDevice"
# generated from default
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/psaux"
Option "Emulate3Buttons" "no"
Option "ZAxisMapping" "4 5"
EndSection
Section "InputDevice"
# generated from default
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Unknown"
ModelName "Unknown"
HorizSync 30.0 - 110.0
VertRefresh 50.0 - 150.0
Option "DPMS"
EndSection
Section "Device"
Identifier "Device0"
Driver "nvidia"
VendorName "NVIDIA Corporation"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Device0"
Monitor "Monitor0"
DefaultDepth 24
SubSection "Display"
Depth 24
Modes "1600x900" "1024x768" "800x600" "640x480"
EndSubSection
EndSection
Here's some specs on this computer, including video cards and such...
Computer
Summary
Computer
Processor Intel(R) Pentium(R) 4 CPU 1.60GHz
Memory 1034MB (239MB used)
Operating System Arch Linux
User Name mythus (Travis K. Randall)
Date/Time Thu 08 Oct 2009 05:24:52 PM CDT
Display
Resolution 1600x900 pixels
OpenGL Renderer GeForce2 MX/AGP/SSE2
X11 Vendor The X.Org Foundation
Multimedia
Audio Adapter ICH - Intel 82801BA-ICH2
Input Devices
Macintosh mouse button emulation
AT Translated Set 2 keyboard
Power Button
Power Button
PC Speaker
Logitech USB Optical Mouse
Printers
No printers found
SCSI Disks
ATA ST3160212A
ATA IC35L090AVV207-0
LITE-ON LTR-16102B
TSSTcorp CD/DVDW TS-H552D
Operating System
Version
Kernel Linux 2.6.30-ARCH (i686)
Compiled #1 SMP PREEMPT Wed Sep 9 12:37:32 UTC 2009
C Library GNU C Library version 2.10.1 (stable)
Default C Compiler GNU C Compiler version 4.4.1 (GCC)
Distribution Arch Linux
Current Session
Computer Name norova
User Name mythus (Travis K. Randall)
Home Directory /home/mythus
Desktop Environment Unknown (Window Manager: Fluxbox)
Misc
Uptime 11 hours, 38 minutes
Load Average 0.20, 0.38, 0.34
Kernel Modules
Loaded Modules
ipv6 IPv6 protocol stack for Linux
reiserfs ReiserFS journaled filesystem
usbhid USB HID core driver
hid
arc4 ARC4 Cipher Algorithm
ecb ECB block cipher algorithm
snd_seq_dummy ALSA sequencer MIDI-through client
rt2500pci Ralink RT2500 PCI & PCMCIA Wireless LAN driver.
snd_seq_oss OSS-compatible sequencer module
rt2x00pci rt2x00 pci library
snd_seq_midi_event MIDI byte <-> sequencer event coder
rt2x00lib rt2x00 library
snd_seq Advanced Linux Sound Architecture sequencer.
led_class LED Class Interface
snd_seq_device ALSA sequencer device management
input_polldev Generic implementation of a polled input device
mac80211 IEEE 802.11 subsystem
snd_intel8x0 Intel 82801AA,82901AB,i810,i820,i830,i840,i845,MX440; SiS 7012; Ali 5455
uhci_hcd USB Universal Host Controller Interface driver
snd_pcm_oss PCM OSS emulation for ALSA.
fan ACPI Fan Driver
cfg80211 wireless configuration support
ppdev
ehci_hcd USB 2.0 'Enhanced' Host Controller (EHCI) Driver
snd_mixer_oss Mixer OSS emulation for ALSA.
snd_ac97_codec Universal interface for Audio Codec '97
nvidia
lp
eeprom_93cx6 EEPROM 93cx6 chip driver
parport_pc PC-style parallel port driver
ohci1394 Driver for PCI OHCI IEEE-1394 controllers
parport
psmouse PS/2 mouse driver
ac97_bus
ieee1394
serio_raw Raw serio driver
8139too RealTek RTL-8139 Fast Ethernet driver
e100 Intel(R) PRO/100 Network Driver
snd_pcm Midlevel PCM code for ALSA.
pcspkr PC Speaker beeper driver
battery ACPI Battery Driver
8139cp RealTek RTL-8139C+ series 10/100 PCI Ethernet driver
snd_timer ALSA timer interface
i2c_core I2C-Bus main module
iTCO_wdt Intel TCO WatchDog Timer Driver
mii MII hardware support library
evdev Input driver event char devices
snd Advanced Linux Sound Architecture driver for soundcards.
ac ACPI AC Adapter Driver
iTCO_vendor_support Intel TCO Vendor Specific WatchDog Timer Driver Support
usbcore
soundcore Core sound module
sg SCSI generic (sg) driver
shpchp Standard Hot Plug PCI Controller Driver
snd_page_alloc Memory allocator for ALSA system.
processor ACPI Processor Driver
thermal ACPI Thermal Zone Driver
pci_hotplug PCI Hot Plug PCI Core
intel_agp
button ACPI Button Driver
agpgart AGP GART driver
rtc_cmos Driver for PC-style 'CMOS' RTCs
rtc_core RTC class support
rtc_lib
ext4 Fourth Extended Filesystem
mbcache Meta block cache (for extended attributes)
jbd2
crc16 CRC16 calculations
sr_mod SCSI cdrom (sr) driver
cdrom
sd_mod SCSI disk (sd) driver
ata_piix SCSI low-level driver for Intel PIIX/ICH ATA controllers
ata_generic low-level driver for generic ATA
pata_acpi SCSI low-level driver for ATA in ACPI mode
libata Library module for ATA devices
floppy
scsi_mod SCSI core
Display
Display
Display
Resolution 1600x900 pixels
Vendor The X.Org Foundation
Version 1.6.3.901
Monitors
Monitor 0 1600x900 pixels
Extensions
BIG-REQUESTS
Composite
DAMAGE
DOUBLE-BUFFER
DPMS
DRI2
GLX
Generic Event Extension
MIT-SCREEN-SAVER
MIT-SHM
NV-CONTROL
NV-GLX
RANDR
RECORD
RENDER
SECURITY
SHAPE
SYNC
X-Resource
XC-MISC
XFIXES
XFree86-DGA
XFree86-VidModeExtension
XINERAMA
XInputExtension
XKEYBOARD
XTEST
XVideo
OpenGL
Vendor NVIDIA Corporation
Renderer GeForce2 MX/AGP/SSE2
Version 1.5.8 NVIDIA 96.43.13
Direct Rendering Yes
Processor
Processor
Processor
Name Intel(R) Pentium(R) 4 CPU 1.60GHz
Family, model, stepping 15, 1, 2 (Pentium 4)
Vendor Intel
Configuration
Cache Size 256kb
Frequency 1594.77MHz
BogoMIPS 3190.44
Byte Order Little Endian
Features
FDIV Bug no
HLT Bug no
F00F Bug no
Coma Bug no
Has FPU yes
Cache
Cache information not available
Capabilities
fpu Floating Point Unit
vme Virtual 86 Mode Extension
de Debug Extensions - I/O breakpoints
pse Page Size Extensions (4MB pages)
tsc Time Stamp Counter and RDTSC instruction
msr Model Specific Registers
pae Physical Address Extensions
mce Machine Check Architeture
cx8 CMPXCHG8 instruction
apic Advanced Programmable Interrupt Controller
sep Fast System Call (SYSENTER/SYSEXIT)
mtrr Memory Type Range Registers
pge Page Global Enable
mca Machine Check Architecture
cmov Conditional Move instruction
pat Page Attribute Table
pse36 36bit Page Size Extensions
clflush Cache Line Flush instruction
dts Debug Store
acpi Thermal Monitor and Software Controlled Clock
mmx MMX technology
fxsr FXSAVE and FXRSTOR instructions
sse SSE instructions
sse2 SSE2 (WNI) instructions
ss Self Snoop
ht HyperThreading
tm Thermal Monitor
up smp kernel running on up
pebs Precise-Event Based Sampling
bts Branch Trace Store
Memory
Memory
Total Memory 1034084 kB
Free Memory 94276 kB
Buffers 40536 kB
Cached 700112 kB
Cached Swap 0 kB
Active 170788 kB
Inactive 726844 kB
Active(anon) 74112 kB
Inactive(anon) 88348 kB
Active(file) 96676 kB
Inactive(file) 638496 kB
Unevictable 12 kB
Mlocked 12 kB
High Memory 139144 kB
Free High Memory 252 kB
Low Memory 894940 kB
Free Low Memory 94024 kB
Virtual Memory 2931852 kB
Free Virtual Memory 2931852 kB
Dirty 12 kB
Writeback 0 kB
AnonPages 156996 kB
Mapped 57392 kB
Slab 24260 kB
SReclaimable 18864 kB
SUnreclaim 5396 kB
PageTables 1376 kB
NFS_Unstable 0 kB
Bounce 0 kB
WritebackTmp 0 kB
CommitLimit 3448892 kB
Committed_AS 404212 kB
VmallocTotal 122880 kB
VmallocUsed 27648 kB
VmallocChunk 52368 kB
DirectMap4k 32760 kB
DirectMap4M 876544 kB
Benchmarks
CPU Blowfish
CPU Blowfish
This Machine 1595 MHz 50.176
Intel(R) Celeron(R) M processor 1.50GHz (null) 26.1876862
PowerPC 740/750 (280.00MHz) (null) 172.816713
CPU CryptoHash
CPU CryptoHash
This Machine 1595 MHz 11.071
CPU Fibonacci
CPU Fibonacci
This Machine 1595 MHz 74.202
Intel(R) Celeron(R) M processor 1.50GHz (null) 8.1375674
PowerPC 740/750 (280.00MHz) (null) 58.07682
CPU N-Queens
CPU N-Queens
This Machine 1595 MHz 132.704
FPU FFT
FPU FFT
This Machine 1595 MHz 104.630
FPU Raytracing
FPU Raytracing
This Machine 1595 MHz 212.639
Intel(R) Celeron(R) M processor 1.50GHz (null) 40.8816714
PowerPC 740/750 (280.00MHz) (null) 161.312647
So what I am wanting help with is finding the solution to the cpu usage so that I can use this computer at least until I can afford a new power supply or whatever. I am open to any good suggestions, though I must state I am not really interested in tiling wm's at the moment. I am just not a true minimalist.
Thanks in advance for any and all help. I understand that there is a lot of info in this post, but it is my hope that with this info the problem can be solved. If there is info I didn't provide that is needed, please let me know.

also check that you have
session.screen0.opaqueMove false
in your .fluxbox/init  this will probably help a bit if it is currently true,
Last edited by Cyrusm (2009-01-26 13:52:13)

Similar Messages

  • High CPU usage with no reason

    High CPU usage with no reason after upgrade to 10.6
    One of screenshots:
    http://www.flickr.com/photos/vlaza/3893077851/

    I'm having the same issue. I have 4gb of ram and all of it will be in use even with just Safari running. High fan use. When this happens video will stutter.

  • High CPU Usage with Flash Player 11

    I am not sure what the problem is but ever since I had those issues I went back to flash archive and installed a previous version that did not come with the flash plug in and I never had any problem with it since I am currently using the Adobe flash version 10 plug in with an adobe flash player active X. and I find out it was the new flash plug in that is the issue it suck all your ram. If you get some people who is having the same issues where flash player is duplicating and eating all their ram then ask them to try the version 10 plug in with the flash 11 active x it will work fine. I tried to run the version 10 flash as a complete set but some dynamic site that plays videos require a later version of flash active x to work and will be asking for an update however by keeping the flash 10 plug in there won't be any other issues. Adobe need to find out what is wrong with the new flash plug in and run a comparison with the flash 10 plug in. I hope this will help some user to get over the issues that made my online experience a nightmare for a while too.

    The best way to get a resolution is to address your individual issue.  Your complaint is that RAM usage is high, which is unrelated to the thread from the guy on Mac that was seeing High CPU usage on high definition video.
    In order to fix the issue that you're describing, we need to be able to reproduce it.  Please provide the information below, and the results of the basic troubleshooting steps as you work through them.  This will help us narrow down the root-cause, and allow us to find comparable hardware in our compatibility lab to reproduce the issue with.
    Basic Troubleshooting Info
    To help troubleshoot we'll need the following system information:
    - Operating system
    - Browser
    - Flash Player version - http://helpx.adobe.com/flash-player/kb/find-version-flash-player.html
    - Antivirus/Anti-Malware software and versions
    The first step is to work through the video troubleshooting guide for your operating system, here:
    - Windows - http://helpx.adobe.com/flash-player/kb/video-playback-issues.html
    - Mac - http://helpx.adobe.com/flash-player/kb/video-playback-issues.htm
    When reporting issues with video or audio, it's also helpful to get your system hardware and driver details.  Instructions for finding this information can be found here:
    - Windows - http://helpx.adobe.com/flash-player/kb/video-playback-issues.html#main_For_Windows_users
    - Mac - http://helpx.adobe.com/flash-player/kb/video-playback-issues.html#main_For_Mac_OS_users
    Finally, sometimes video and audio problems are caused at a lower level and not directly related to Flash Player.  I recommend trying both of the links below to see how they perform.  If the problem exists with both, then Flash Player is most likely not the culprit as the HTML5 video link does not use Flash Player when playing.  You can verify this by right clicking the HTML5 video and looking for the words "About HTML5" at the bottom of the menu.
    - HTML5 video - http://www.youtube.com/watch?v=cTl3U6aSd2w&html5=True
    - Non-HTML5 video - http://www.youtube.com/watch?v=cTl3U6aSd2we
    Thanks!

  • Since 10.4.6 Update: "ATSServer" with high CPU-usage when opening PDFs

    Since I've updated to 10.4.6 my system is very slow when I open PDFs (in "Preview" or "Acrobat").
    This is caused by the process "ATSServer" which goes through every file in "~/Library/Fonts" (I have over 4.800 files there - but just a view are activated by "FontBook") and so it takes very high CPU-usage.
    I didn't have this problem bevore the update and I didn't make any changes on my font settings.
    I've cleaned the font cache, but it doesn't help.
    Any ideas?
    Ciao
    Mephizo
    PS: Excuse my poor English.
    PowerBook G4 17'' 1.67 GHz   Mac OS X (10.4.6)  
    PowerBook G4 17'' 1.67 GHz   Mac OS X (10.4.6)  

    I haven't noticed any change myself, Dan, but I have the 2 GHz model.
    One thing I HAVE noticed though after OS updates is that they can often result in a fair amount of file and free space fragmentation immediately after installation. OSX's routines will deal with fragmentation of small files , but not of large ones (over 20 Meg), and it won't deal very effectively with free space fragmentation. If your HD is getting full this can cause significant slowdowns, especially where video is involved.
    You should also run DiskUtility and check for any directory and permissions issues.
    Cheers
    Rod

  • High CPU usage with Coherence 3.5.0 cluster node

    We're noticing sustained high CPU usage on one of our Coherence nodes - this happens after running a job that pretty intensively interacts with the cache. The jobs complete, however we still see the Coherence process using approximately the equivalent of one core's worth of CPU. I took a couple of thread dumps about fifteen minutes apart, and the only noticeable differences are within the PacketListener1 and PacketListenerN threads - they're holding locks on different DatagramPacket instances, which suggests to be that this may be the piece of code that is looping.
    There are two other cache nodes in this particular cluster - both of them on a different machine - and neither of them are exhibiting the same CPU utilization.
    Environment:
    Coherence 3.5.0
    Java - BEA JRockit(R) (build R27.6.3-40_o-112056-1.6.0_11-20090318-2103-linux-x86_64, compiled mode)
    Has anyone encountered this scenario before?
    Here's a copy of the two thread dumps:
    Thread Dump 1 -
    ===== FULL THREAD DUMP ===============
    Thu Feb 24 21:45:00 2011
    BEA JRockit(R) R27.6.3-40_o-112056-1.6.0_11-20090318-2103-linux-x86_64
    "Main Thread" id=1 idx=0x4 tid=18143 prio=5 alive, in native, waiting
    -- Waiting for notification on: java/lang/Class@0x43587b58[fat lock]
    at jrockit/vm/Threads.waitForNotifySignal(JLjava/lang/Object;)Z(Native Method)
    at java/lang/Object.wait(J)V(Native Method)[optimized]
    at com/tangosol/net/DefaultCacheServer.main(DefaultCacheServer.java:80)
    ^-- Lock released while waiting: java/lang/Class@0x43587b58[fat lock]
    at com/zzzz/carbon/cacheserver/ZzzzCoherenceServerStartup.doWork(ZzzzCoherenceServerStartup.java:29)
    at com/zzzz/util/runner/ZzzzRunnerBase.run(ZzzzRunnerBase.java:23)
    at com/zzzz/carbon/cacheserver/ZzzzCoherenceServerStartup.main(ZzzzCoherenceServerStartup.java:16)
    at jrockit/vm/RNI.c2java(JJJJJ)V(Native Method)
    -- end of trace
    "(Signal Handler)" id=2 idx=0x8 tid=18144 prio=5 alive, in native, daemon
    "(GC Main Thread)" id=3 idx=0xc tid=18145 prio=5 alive, in native, daemon
    "(GC Worker Thread 1)" id=? idx=0x10 tid=18146 prio=5 alive, in native, daemon
    "(GC Worker Thread 2)" id=? idx=0x14 tid=18147 prio=5 alive, in native, daemon
    "(GC Worker Thread 3)" id=? idx=0x18 tid=18148 prio=5 alive, in native, daemon
    "(GC Worker Thread 4)" id=? idx=0x1c tid=18149 prio=5 alive, in native, daemon
    "(Code Generation Thread 1)" id=4 idx=0x20 tid=18150 prio=5 alive, in native, native_waiting, daemon
    "(Code Optimization Thread 1)" id=5 idx=0x24 tid=18151 prio=5 alive, in native, native_waiting, daemon
    "(VM Periodic Task)" id=6 idx=0x28 tid=18152 prio=10 alive, in native, daemon
    "Finalizer" id=7 idx=0x2c tid=18153 prio=8 alive, in native, native_waiting, daemon
    at jrockit/memory/Finalizer.waitForFinalizees([Ljava/lang/Object;)I(Native Method)
        at jrockit/memory/Finalizer.access$500(Finalizer.java:12)
        at jrockit/memory/Finalizer$4.run(Finalizer.java:159)
        at java/lang/Thread.run(Thread.java:619)
        at jrockit/vm/RNI.c2java(JJJJJ)V(Native Method)
        -- end of trace
    "Reference Handler" id=8 idx=0x30 tid=18154 prio=10 alive, in native, native_waiting, daemon
        at java/lang/ref/Reference.waitForActivatedQueue()Ljava/lang/ref/Reference;(Native Method)
        at java/lang/ref/Reference.access$100(Reference.java:11)
        at java/lang/ref/Reference$ReferenceHandler.run(Reference.java:79)
        at jrockit/vm/RNI.c2java(JJJJJ)V(Native Method)
        -- end of trace
    "(Sensor Event Thread)" id=9 idx=0x34 tid=18155 prio=5 alive, in native, daemon
    "Logger@9217551 3.5/459" id=12 idx=0x38 tid=18158 prio=3 alive, in native, waiting, daemon
        -- Waiting for notification on: com/tangosol/coherence/component/application/console/Coherence$Logger$Queue@0x4e1faef8[fat lock]
    at jrockit/vm/Threads.waitForNotifySignal(JLjava/lang/Object;)Z(Native Method)
    at java/lang/Object.wait(J)V(Native Method)[optimized]
    at com/tangosol/coherence/component/util/Daemon.onWait(Daemon.CDB:18)[optimized]
    ^-- Lock released while waiting: com/tangosol/coherence/component/application/console/Coherence$Logger$Queue@0x4e1faef8[fat lock]
    at com/tangosol/coherence/component/util/Daemon.run(Daemon.CDB:34)
    at java/lang/Thread.run(Thread.java:619)
    at jrockit/vm/RNI.c2java(JJJJJ)V(Native Method)
    -- end of trace
    "PacketListener1" id=14 idx=0x3c tid=18159 prio=8 alive, in native, daemon
    at java/net/PlainDatagramSocketImpl.receive0(Ljava/net/DatagramPacket;)V(Native Method)
    ^-- Holding lock: java/net/PlainDatagramSocketImpl@0x4cb21360[recursive]
    at java/net/PlainDatagramSocketImpl.receive(PlainDatagramSocketImpl.java:136)[inlined]
    at java/net/DatagramSocket.receive(DatagramSocket.java:712)[optimized]
    ^-- Holding lock: java/net/PlainDatagramSocketImpl@0x4cb21360[thin lock]
    ^-- Holding lock: java/net/DatagramPacket@0x73aa4e80[thin lock]
    ^-- Holding lock: java/net/DatagramSocket@0x4cb21338[thin lock]
    at com/tangosol/coherence/component/net/socket/UdpSocket.receive(UdpSocket.CDB:20)[optimized]
    at com/tangosol/coherence/component/net/UdpPacket.receive(UdpPacket.CDB:4)[optimized]
    at com/tangosol/coherence/component/util/daemon/queueProcessor/packetProcessor/PacketListener.onNotify(PacketListener.CDB:19)
    at com/tangosol/coherence/component/util/Daemon.run(Daemon.CDB:37)
    at java/lang/Thread.run(Thread.java:619)
    at jrockit/vm/RNI.c2java(JJJJJ)V(Native Method)
    -- end of trace
    "PacketReceiver" id=15 idx=0x40 tid=18160 prio=7 alive, in native, waiting, daemon
    -- Waiting for notification on: com/tangosol/coherence/component/net/Cluster$PacketReceiver$InQueue@0x4cf60d58[fat lock]
    at jrockit/vm/Threads.waitForNotifySignal(JLjava/lang/Object;)Z(Native Method)
    at java/lang/Object.wait(J)V(Native Method)[optimized]
    at com/tangosol/coherence/component/util/Daemon.onWait(Daemon.CDB:18)[inlined]
    at com/tangosol/coherence/component/util/daemon/queueProcessor/packetProcessor/PacketReceiver.onWait(PacketReceiver.CDB:2)[optimized]
    ^-- Lock released while waiting: com/tangosol/coherence/component/net/Cluster$PacketReceiver$InQueue@0x4cf60d58[fat lock]
    at com/tangosol/coherence/component/util/Daemon.run(Daemon.CDB:34)
    at java/lang/Thread.run(Thread.java:619)
    at jrockit/vm/RNI.c2java(JJJJJ)V(Native Method)
    -- end of trace
    "PacketPublisher" id=16 idx=0x44 tid=18161 prio=6 alive, in native, waiting, daemon
    -- Waiting for notification on: com/tangosol/coherence/component/net/Cluster$PacketPublisher$InQueue@0x4ca053a8[fat lock]
    at jrockit/vm/Threads.waitForNotifySignal(JLjava/lang/Object;)Z(Native Method)
    at java/lang/Object.wait(J)V(Native Method)[optimized]
    at com/tangosol/coherence/component/util/Daemon.onWait(Daemon.CDB:18)[inlined]
    at com/tangosol/coherence/component/util/daemon/queueProcessor/packetProcessor/PacketPublisher.onWait(PacketPublisher.CDB:2)[optimized]
    ^-- Lock released while waiting: com/tangosol/coherence/component/net/Cluster$PacketPublisher$InQueue@0x4ca053a8[fat lock]
    ^-- Lock released while waiting: com/tangosol/coherence/component/net/Cluster$PacketPublisher$InQueue@0x4ca053a8[fat lock]
    at com/tangosol/coherence/component/util/Daemon.run(Daemon.CDB:34)
    at java/lang/Thread.run(Thread.java:619)
    at jrockit/vm/RNI.c2java(JJJJJ)V(Native Method)
    -- end of trace
    "PacketSpeaker" id=17 idx=0x48 tid=18162 prio=8 alive, in native, waiting, daemon
    -- Waiting for notification on: com/tangosol/coherence/component/net/Cluster$PacketSpeaker$BundlingQueue@0x4cabe9d8[fat lock]
    at jrockit/vm/Threads.waitForNotifySignal(JLjava/lang/Object;)Z(Native Method)
    at java/lang/Object.wait(J)V(Native Method)[optimized]
    at com/tangosol/coherence/component/util/queue/ConcurrentQueue.waitForEntry(ConcurrentQueue.CDB:16)
    ^-- Lock released while waiting: com/tangosol/coherence/component/net/Cluster$PacketSpeaker$BundlingQueue@0x4cabe9d8[fat lock]
    at com/tangosol/coherence/component/util/queue/ConcurrentQueue.remove(ConcurrentQueue.CDB:7)
    at com/tangosol/coherence/component/util/Queue.remove(Queue.CDB:1)
    at com/tangosol/coherence/component/util/daemon/queueProcessor/packetProcessor/PacketSpeaker.onNotify(PacketSpeaker.CDB:62)
    at com/tangosol/coherence/component/util/Daemon.run(Daemon.CDB:37)
    at java/lang/Thread.run(Thread.java:619)
    at jrockit/vm/RNI.c2java(JJJJJ)V(Native Method)
    -- end of trace
    "PacketListenerN" id=18 idx=0x4c tid=18163 prio=8 alive, in native, daemon
    at java/net/PlainDatagramSocketImpl.receive0(Ljava/net/DatagramPacket;)V(Native Method)
    ^-- Holding lock: java/net/PlainDatagramSocketImpl@0x4cb221b0[recursive]
    at java/net/PlainDatagramSocketImpl.receive(PlainDatagramSocketImpl.java:136)[inlined]
    at java/net/DatagramSocket.receive(DatagramSocket.java:712)[optimized]
    ^-- Holding lock: java/net/PlainDatagramSocketImpl@0x4cb221b0[thin lock]
    ^-- Holding lock: java/net/DatagramPacket@0x73e59890[thin lock]
    ^-- Holding lock: java/net/MulticastSocket@0x4cb22178[thin lock]
    at com/tangosol/coherence/component/net/socket/UdpSocket.receive(UdpSocket.CDB:20)[optimized]
    at com/tangosol/coherence/component/net/UdpPacket.receive(UdpPacket.CDB:4)[optimized]
    at com/tangosol/coherence/component/util/daemon/queueProcessor/packetProcessor/PacketListener.onNotify(PacketListener.CDB:19)
    at com/tangosol/coherence/component/util/Daemon.run(Daemon.CDB:37)
    at java/lang/Thread.run(Thread.java:619)
    at jrockit/vm/RNI.c2java(JJJJJ)V(Native Method)
    -- end of trace
    "Cluster|Member(Id=2, Timestamp=2011-02-23 16:25:36.488, Address=10.10.100.77:8095, MachineId=25677, Location=site:emtzzzz.com,machine:njdev04,process:18142,member:cldev201~carboncachelauncher~181)" id=19 idx=0x50 tid=18164 prio=5 alive, in native, waiting, daemon
    -- Waiting for notification on: com/tangosol/coherence/component/util/queue/concurrentQueue/DualQueue@0x4cac64d8[fat lock]
    at jrockit/vm/Threads.waitForNotifySignal(JLjava/lang/Object;)Z(Native Method)
    at java/lang/Object.wait(J)V(Native Method)[optimized]
    at com/tangosol/coherence/component/util/Daemon.onWait(Daemon.CDB:18)[inlined]
    at com/tangosol/coherence/component/util/daemon/queueProcessor/service/Grid.onWait(Grid.CDB:9)[optimized]
    ^-- Lock released while waiting: com/tangosol/coherence/component/util/queue/concurrentQueue/DualQueue@0x4cac64d8[fat lock]
    at com/tangosol/coherence/component/util/Daemon.run(Daemon.CDB:34)
    at java/lang/Thread.run(Thread.java:619)
    at jrockit/vm/RNI.c2java(JJJJJ)V(Native Method)
    -- end of trace
    "TcpRingListener" id=20 idx=0x54 tid=18165 prio=6 alive, in native, daemon
    at java/net/PlainSocketImpl.socketAccept(Ljava/net/SocketImpl;)V(Native Method)
    at java/net/PlainSocketImpl.accept(PlainSocketImpl.java:384)
    ^-- Holding lock: java/net/SocksSocketImpl@0x4cb227d8[thin lock]
    at java/net/ServerSocket.implAccept(ServerSocket.java:453)
    at java/net/ServerSocket.accept(ServerSocket.java:421)
    at com/tangosol/coherence/component/net/socket/TcpSocketAccepter.accept(TcpSocketAccepter.CDB:18)
    at com/tangosol/coherence/component/util/daemon/TcpRingListener.acceptConnection(TcpRingListener.CDB:10)
    at com/tangosol/coherence/component/util/daemon/TcpRingListener.onNotify(TcpRingListener.CDB:9)
    at com/tangosol/coherence/component/util/Daemon.run(Daemon.CDB:37)
    at java/lang/Thread.run(Thread.java:619)
    at jrockit/vm/RNI.c2java(JJJJJ)V(Native Method)
    -- end of trace
    "Invocation:Management:EventDispatcher" id=22 idx=0x58 tid=18166 prio=5 alive, in native, waiting, daemon
    -- Waiting for notification on: com/tangosol/coherence/component/util/daemon/queueProcessor/Service$EventDispatcher$Queue@0x4ab76140[fat lock]
    at jrockit/vm/Threads.waitForNotifySignal(JLjava/lang/Object;)Z(Native Method)
    at java/lang/Object.wait(J)V(Native Method)[optimized]
    at com/tangosol/coherence/component/util/Daemon.onWait(Daemon.CDB:18)[optimized]
    ^-- Lock released while waiting: com/tangosol/coherence/component/util/daemon/queueProcessor/Service$EventDispatcher$Queue@0x4ab76140[fat lock]
    at com/tangosol/coherence/component/util/daemon/queueProcessor/Service$EventDispatcher.onWait(Service.CDB:7)
    at com/tangosol/coherence/component/util/Daemon.run(Daemon.CDB:34)
    at java/lang/Thread.run(Thread.java:619)
    at jrockit/vm/RNI.c2java(JJJJJ)V(Native Method)
    -- end of trace
    "Invocation:Management" id=23 idx=0x5c tid=18167 prio=5 alive, in native, waiting, daemon
    -- Waiting for notification on: com/tangosol/coherence/component/util/queue/concurrentQueue/DualQueue@0x4ab75508[fat lock]
    at jrockit/vm/Threads.waitForNotifySignal(JLjava/lang/Object;)Z(Native Method)
    at java/lang/Object.wait(J)V(Native Method)[optimized]
    at com/tangosol/coherence/component/util/Daemon.onWait(Daemon.CDB:18)[inlined]
    at com/tangosol/coherence/component/util/daemon/queueProcessor/service/Grid.onWait(Grid.CDB:9)[optimized]
    ^-- Lock released while waiting: com/tangosol/coherence/component/util/queue/concurrentQueue/DualQueue@0x4ab75508[fat lock]
    at com/tangosol/coherence/component/util/Daemon.run(Daemon.CDB:34)
    at java/lang/Thread.run(Thread.java:619)
    at jrockit/vm/RNI.c2java(JJJJJ)V(Native Method)
    -- end of trace
    "DistributedCache" id=25 idx=0x60 tid=18168 prio=5 alive, in native, waiting, daemon
    -- Waiting for notification on: com/tangosol/coherence/component/util/queue/concurrentQueue/DualQueue@0x4a3869b0[fat lock]
    at jrockit/vm/Threads.waitForNotifySignal(JLjava/lang/Object;)Z(Native Method)
    at java/lang/Object.wait(J)V(Native Method)[optimized]
    at com/tangosol/coherence/component/util/Daemon.onWait(Daemon.CDB:18)[inlined]
    at com/tangosol/coherence/component/util/daemon/queueProcessor/service/Grid.onWait(Grid.CDB:9)[optimized]
    ^-- Lock released while waiting: com/tangosol/coherence/component/util/queue/concurrentQueue/DualQueue@0x4a3869b0[fat lock]
    at com/tangosol/coherence/component/util/Daemon.run(Daemon.CDB:34)
    at java/lang/Thread.run(Thread.java:619)
    at jrockit/vm/RNI.c2java(JJJJJ)V(Native Method)
    -- end of trace
    ===== END OF THREAD DUMP ===============
    Thread Dump 2 -
    ===== FULL THREAD DUMP ===============
    Thu Feb 24 21:27:53 2011
    BEA JRockit(R) R27.6.3-40_o-112056-1.6.0_11-20090318-2103-linux-x86_64
    "Main Thread" id=1 idx=0x4 tid=18143 prio=5 alive, in native, waiting
    -- Waiting for notification on: java/lang/Class@0x43587b58[fat lock]
    at jrockit/vm/Threads.waitForNotifySignal(JLjava/lang/Object;)Z(Native Method)
    at java/lang/Object.wait(J)V(Native Method)[optimized]
    at com/tangosol/net/DefaultCacheServer.main(DefaultCacheServer.java:80)
    ^-- Lock released while waiting: java/lang/Class@0x43587b58[fat lock]
    at com/zzzz/carbon/cacheserver/ZzzzCoherenceServerStartup.doWork(ZzzzCoherenceServerStartup.java:29)
    at com/zzzz/util/runner/ZzzzRunnerBase.run(ZzzzRunnerBase.java:23)
    at com/zzzz/carbon/cacheserver/ZzzzCoherenceServerStartup.main(ZzzzCoherenceServerStartup.java:16)
    at jrockit/vm/RNI.c2java(JJJJJ)V(Native Method)
    -- end of trace
    "(Signal Handler)" id=2 idx=0x8 tid=18144 prio=5 alive, in native, daemon
    "(GC Main Thread)" id=3 idx=0xc tid=18145 prio=5 alive, in native, native_waiting, daemon
    "(GC Worker Thread 1)" id=? idx=0x10 tid=18146 prio=5 alive, in native, daemon
    "(GC Worker Thread 2)" id=? idx=0x14 tid=18147 prio=5 alive, in native, daemon
    "(GC Worker Thread 3)" id=? idx=0x18 tid=18148 prio=5 alive, in native, daemon
    "(GC Worker Thread 4)" id=? idx=0x1c tid=18149 prio=5 alive, in native, daemon
    "(Code Generation Thread 1)" id=4 idx=0x20 tid=18150 prio=5 alive, in native, native_waiting, daemon
    "(Code Optimization Thread 1)" id=5 idx=0x24 tid=18151 prio=5 alive, in native, native_waiting, daemon
    "(VM Periodic Task)" id=6 idx=0x28 tid=18152 prio=10 alive, in native, daemon
    "Finalizer" id=7 idx=0x2c tid=18153 prio=8 alive, in native, native_waiting, daemon
    at jrockit/memory/Finalizer.waitForFinalizees([Ljava/lang/Object;)I(Native Method)
        at jrockit/memory/Finalizer.access$500(Finalizer.java:12)
        at jrockit/memory/Finalizer$4.run(Finalizer.java:159)
        at java/lang/Thread.run(Thread.java:619)
        at jrockit/vm/RNI.c2java(JJJJJ)V(Native Method)
        -- end of trace
    "Reference Handler" id=8 idx=0x30 tid=18154 prio=10 alive, in native, native_waiting, daemon
        at java/lang/ref/Reference.waitForActivatedQueue()Ljava/lang/ref/Reference;(Native Method)
        at java/lang/ref/Reference.access$100(Reference.java:11)
        at java/lang/ref/Reference$ReferenceHandler.run(Reference.java:79)
        at jrockit/vm/RNI.c2java(JJJJJ)V(Native Method)
        -- end of trace
    "(Sensor Event Thread)" id=9 idx=0x34 tid=18155 prio=5 alive, in native, daemon
    "Logger@9217551 3.5/459" id=12 idx=0x38 tid=18158 prio=3 alive, in native, waiting, daemon
        -- Waiting for notification on: com/tangosol/coherence/component/application/console/Coherence$Logger$Queue@0x4e1faef8[fat lock]
    at jrockit/vm/Threads.waitForNotifySignal(JLjava/lang/Object;)Z(Native Method)
    at java/lang/Object.wait(J)V(Native Method)[optimized]
    at com/tangosol/coherence/component/util/Daemon.onWait(Daemon.CDB:18)[optimized]
    ^-- Lock released while waiting: com/tangosol/coherence/component/application/console/Coherence$Logger$Queue@0x4e1faef8[fat lock]
    at com/tangosol/coherence/component/util/Daemon.run(Daemon.CDB:34)
    at java/lang/Thread.run(Thread.java:619)
    at jrockit/vm/RNI.c2java(JJJJJ)V(Native Method)
    -- end of trace
    "PacketListener1" id=14 idx=0x3c tid=18159 prio=8 alive, in native, daemon
    at java/net/PlainDatagramSocketImpl.receive0(Ljava/net/DatagramPacket;)V(Native Method)
    ^-- Holding lock: java/net/PlainDatagramSocketImpl@0x4cb21360[recursive]
    at java/net/PlainDatagramSocketImpl.receive(PlainDatagramSocketImpl.java:136)[inlined]
    at java/net/DatagramSocket.receive(DatagramSocket.java:712)[optimized]
    ^-- Holding lock: java/net/PlainDatagramSocketImpl@0x4cb21360[thin lock]
    ^-- Holding lock: java/net/DatagramPacket@0x73a80930[thin lock]
    ^-- Holding lock: java/net/DatagramSocket@0x4cb21338[thin lock]
    at com/tangosol/coherence/component/net/socket/UdpSocket.receive(UdpSocket.CDB:20)[optimized]
    at com/tangosol/coherence/component/net/UdpPacket.receive(UdpPacket.CDB:4)[optimized]
    at com/tangosol/coherence/component/util/daemon/queueProcessor/packetProcessor/PacketListener.onNotify(PacketListener.CDB:19)
    at com/tangosol/coherence/component/util/Daemon.run(Daemon.CDB:37)
    at java/lang/Thread.run(Thread.java:619)
    at jrockit/vm/RNI.c2java(JJJJJ)V(Native Method)
    -- end of trace
    "PacketReceiver" id=15 idx=0x40 tid=18160 prio=7 alive, in native, waiting, daemon
    -- Waiting for notification on: com/tangosol/coherence/component/net/Cluster$PacketReceiver$InQueue@0x4cf60d58[fat lock]
    at jrockit/vm/Threads.waitForNotifySignal(JLjava/lang/Object;)Z(Native Method)
    at java/lang/Object.wait(J)V(Native Method)[optimized]
    at com/tangosol/coherence/component/util/Daemon.onWait(Daemon.CDB:18)[inlined]
    at com/tangosol/coherence/component/util/daemon/queueProcessor/packetProcessor/PacketReceiver.onWait(PacketReceiver.CDB:2)[optimized]
    ^-- Lock released while waiting: com/tangosol/coherence/component/net/Cluster$PacketReceiver$InQueue@0x4cf60d58[fat lock]
    at com/tangosol/coherence/component/util/Daemon.run(Daemon.CDB:34)
    at java/lang/Thread.run(Thread.java:619)
    at jrockit/vm/RNI.c2java(JJJJJ)V(Native Method)
    -- end of trace
    "PacketPublisher" id=16 idx=0x44 tid=18161 prio=6 alive, in native, waiting, daemon
    -- Waiting for notification on: com/tangosol/coherence/component/net/Cluster$PacketPublisher$InQueue@0x4ca053a8[fat lock]
    at jrockit/vm/Threads.waitForNotifySignal(JLjava/lang/Object;)Z(Native Method)
    at java/lang/Object.wait(J)V(Native Method)[optimized]
    at com/tangosol/coherence/component/util/Daemon.onWait(Daemon.CDB:18)[inlined]
    at com/tangosol/coherence/component/util/daemon/queueProcessor/packetProcessor/PacketPublisher.onWait(PacketPublisher.CDB:2)[optimized]
    ^-- Lock released while waiting: com/tangosol/coherence/component/net/Cluster$PacketPublisher$InQueue@0x4ca053a8[fat lock]
    ^-- Lock released while waiting: com/tangosol/coherence/component/net/Cluster$PacketPublisher$InQueue@0x4ca053a8[fat lock]
    at com/tangosol/coherence/component/util/Daemon.run(Daemon.CDB:34)
    at java/lang/Thread.run(Thread.java:619)
    at jrockit/vm/RNI.c2java(JJJJJ)V(Native Method)
    -- end of trace
    "PacketSpeaker" id=17 idx=0x48 tid=18162 prio=8 alive, in native, waiting, daemon
    -- Waiting for notification on: com/tangosol/coherence/component/net/Cluster$PacketSpeaker$BundlingQueue@0x4cabe9d8[fat lock]
    at jrockit/vm/Threads.waitForNotifySignal(JLjava/lang/Object;)Z(Native Method)
    at java/lang/Object.wait(J)V(Native Method)[optimized]
    at com/tangosol/coherence/component/util/queue/ConcurrentQueue.waitForEntry(ConcurrentQueue.CDB:16)
    ^-- Lock released while waiting: com/tangosol/coherence/component/net/Cluster$PacketSpeaker$BundlingQueue@0x4cabe9d8[fat lock]
    at com/tangosol/coherence/component/util/queue/ConcurrentQueue.remove(ConcurrentQueue.CDB:7)
    at com/tangosol/coherence/component/util/Queue.remove(Queue.CDB:1)
    at com/tangosol/coherence/component/util/daemon/queueProcessor/packetProcessor/PacketSpeaker.onNotify(PacketSpeaker.CDB:62)
    at com/tangosol/coherence/component/util/Daemon.run(Daemon.CDB:37)
    at java/lang/Thread.run(Thread.java:619)
    at jrockit/vm/RNI.c2java(JJJJJ)V(Native Method)
    -- end of trace
    "PacketListenerN" id=18 idx=0x4c tid=18163 prio=8 alive, in native, daemon
    at java/net/PlainDatagramSocketImpl.receive0(Ljava/net/DatagramPacket;)V(Native Method)
    ^-- Holding lock: java/net/PlainDatagramSocketImpl@0x4cb221b0[recursive]
    at java/net/PlainDatagramSocketImpl.receive(PlainDatagramSocketImpl.java:136)[inlined]
    at java/net/DatagramSocket.receive(DatagramSocket.java:712)[optimized]
    ^-- Holding lock: java/net/PlainDatagramSocketImpl@0x4cb221b0[thin lock]
    ^-- Holding lock: java/net/DatagramPacket@0x5e55a240[thin lock]
    ^-- Holding lock: java/net/MulticastSocket@0x4cb22178[thin lock]
    at com/tangosol/coherence/component/net/socket/UdpSocket.receive(UdpSocket.CDB:20)[optimized]
    at com/tangosol/coherence/component/net/UdpPacket.receive(UdpPacket.CDB:4)[optimized]
    at com/tangosol/coherence/component/util/daemon/queueProcessor/packetProcessor/PacketListener.onNotify(PacketListener.CDB:19)
    at com/tangosol/coherence/component/util/Daemon.run(Daemon.CDB:37)
    at java/lang/Thread.run(Thread.java:619)
    at jrockit/vm/RNI.c2java(JJJJJ)V(Native Method)
    -- end of trace
    "Cluster|Member(Id=2, Timestamp=2011-02-23 16:25:36.488, Address=10.10.100.77:8095, MachineId=25677, Location=site:emtzzzz.com,machine:njdev04,process:18142,member:cldev201~carboncachelauncher~181)" id=19 idx=0x50 tid=18164 prio=5 alive, in native, waiting, daemon
    -- Waiting for notification on: com/tangosol/coherence/component/util/queue/concurrentQueue/DualQueue@0x4cac64d8[fat lock]
    at jrockit/vm/Threads.waitForNotifySignal(JLjava/lang/Object;)Z(Native Method)
    at java/lang/Object.wait(J)V(Native Method)[optimized]
    at com/tangosol/coherence/component/util/Daemon.onWait(Daemon.CDB:18)[inlined]
    at com/tangosol/coherence/component/util/daemon/queueProcessor/service/Grid.onWait(Grid.CDB:9)[optimized]
    ^-- Lock released while waiting: com/tangosol/coherence/component/util/queue/concurrentQueue/DualQueue@0x4cac64d8[fat lock]
    at com/tangosol/coherence/component/util/Daemon.run(Daemon.CDB:34)
    at java/lang/Thread.run(Thread.java:619)
    at jrockit/vm/RNI.c2java(JJJJJ)V(Native Method)
    -- end of trace
    "TcpRingListener" id=20 idx=0x54 tid=18165 prio=6 alive, in native, daemon
    at java/net/PlainSocketImpl.socketAccept(Ljava/net/SocketImpl;)V(Native Method)
    at java/net/PlainSocketImpl.accept(PlainSocketImpl.java:384)
    ^-- Holding lock: java/net/SocksSocketImpl@0x4cb227d8[thin lock]
    at java/net/ServerSocket.implAccept(ServerSocket.java:453)
    at java/net/ServerSocket.accept(ServerSocket.java:421)
    at com/tangosol/coherence/component/net/socket/TcpSocketAccepter.accept(TcpSocketAccepter.CDB:18)
    at com/tangosol/coherence/component/util/daemon/TcpRingListener.acceptConnection(TcpRingListener.CDB:10)
    at com/tangosol/coherence/component/util/daemon/TcpRingListener.onNotify(TcpRingListener.CDB:9)
    at com/tangosol/coherence/component/util/Daemon.run(Daemon.CDB:37)
    at java/lang/Thread.run(Thread.java:619)
    at jrockit/vm/RNI.c2java(JJJJJ)V(Native Method)
    -- end of trace
    "Invocation:Management:EventDispatcher" id=22 idx=0x58 tid=18166 prio=5 alive, in native, waiting, daemon
    -- Waiting for notification on: com/tangosol/coherence/component/util/daemon/queueProcessor/Service$EventDispatcher$Queue@0x4ab76140[fat lock]
    at jrockit/vm/Threads.waitForNotifySignal(JLjava/lang/Object;)Z(Native Method)
    at java/lang/Object.wait(J)V(Native Method)[optimized]
    at com/tangosol/coherence/component/util/Daemon.onWait(Daemon.CDB:18)[optimized]
    ^-- Lock released while waiting: com/tangosol/coherence/component/util/daemon/queueProcessor/Service$EventDispatcher$Queue@0x4ab76140[fat lock]
    at com/tangosol/coherence/component/util/daemon/queueProcessor/Service$EventDispatcher.onWait(Service.CDB:7)
    at com/tangosol/coherence/component/util/Daemon.run(Daemon.CDB:34)
    at java/lang/Thread.run(Thread.java:619)
    at jrockit/vm/RNI.c2java(JJJJJ)V(Native Method)
    -- end of trace
    "Invocation:Management" id=23 idx=0x5c tid=18167 prio=5 alive, in native, waiting, daemon
    -- Waiting for notification on: com/tangosol/coherence/component/util/queue/concurrentQueue/DualQueue@0x4ab75508[fat lock]
    at jrockit/vm/Threads.waitForNotifySignal(JLjava/lang/Object;)Z(Native Method)
    at java/lang/Object.wait(J)V(Native Method)[optimized]
    at com/tangosol/coherence/component/util/Daemon.onWait(Daemon.CDB:18)[inlined]
    at com/tangosol/coherence/component/util/daemon/queueProcessor/service/Grid.onWait(Grid.CDB:9)[optimized]
    ^-- Lock released while waiting: com/tangosol/coherence/component/util/queue/concurrentQueue/DualQueue@0x4ab75508[fat lock]
    at com/tangosol/coherence/component/util/Daemon.run(Daemon.CDB:34)
    at java/lang/Thread.run(Thread.java:619)
    at jrockit/vm/RNI.c2java(JJJJJ)V(Native Method)
    -- end of trace
    "DistributedCache" id=25 idx=0x60 tid=18168 prio=5 alive, in native, waiting, daemon
    -- Waiting for notification on: com/tangosol/coherence/component/util/queue/concurrentQueue/DualQueue@0x4a3869b0[fat lock]
    at jrockit/vm/Threads.waitForNotifySignal(JLjava/lang/Object;)Z(Native Method)
    at java/lang/Object.wait(J)V(Native Method)[optimized]
    at com/tangosol/coherence/component/util/Daemon.onWait(Daemon.CDB:18)[inlined]
    at com/tangosol/coherence/component/util/daemon/queueProcessor/service/Grid.onWait(Grid.CDB:9)[optimized]
    ^-- Lock released while waiting: com/tangosol/coherence/component/util/queue/concurrentQueue/DualQueue@0x4a3869b0[fat lock]
    at com/tangosol/coherence/component/util/Daemon.run(Daemon.CDB:34)
    at java/lang/Thread.run(Thread.java:619)
    at jrockit/vm/RNI.c2java(JJJJJ)V(Native Method)
    -- end of trace
    ===== END OF THREAD DUMP ===============

    Charlie, Cameron,
    Thanks for following up. To answer Cameron's question - yes, running top shows that it is this process using a significant amount of the CPU. I captured a JRA this morning setting nativesamples=true.
    I see the following when I look at the Hot Methods - let me know if there is something else that would shed some more light on this issue.
    Method     Percent(%)     #Samples     Optimized     Native     Method Id.
    libjvm.so#mmDetGcFollowReferencesWorkers     28.575     2,062     0     1     0x2AE6B82EC2C1
    libpthread.so.0#__recvfrom_nocancel     26.012     1,877     0     1     0x3CC1A0D689
    libpthread.so.0#__accept_nocancel     26.012     1,877     0     1     0x3CC1A0D4A9
    libjvm.so#mmBalanceGetReference     4.975     359     0     1     0x2AE6B817A65B
    libjvm.so#objIterStepFieldFromBitmaskWord     4.753     343     0     1     0x2AE6B82A6B34
    libjvm.so#objIterStep     3.88     280     0     1     0x2AE6B82A6F8D
    libjvm.so#objIterInitInner     2.744     198     0     1     0x2AE6B82A71B7
    libjvm.so#mmBalanceStoreReference     1.414     102     0     1     0x2AE6B817A781
    libjvm.so#objIterSetupFields     0.637     46     0     1     0x2AE6B82A6B08
    libjvm.so#nativeInnerLockNotLinked     0.236     17     0     1     0x2AE6B829DE76
    libjvm.so#mmWorkPacketPoolGet     0.125     9     0     1     0x2AE6B817A4F5
    libjvm.so#qBitSetIsBitSetInWord     0.069     5     0     1     0x2AE6B82C8AA6
    libjvm.so#nativeInnerUnlockNotLinked     0.069     5     0     1     0x2AE6B829E028
    libjvm.so#mmWorkPacketPoolAdd     0.042     3     0     1     0x2AE6B817A48E
    libjvm.so#objPoolMarkAllHard     0.042     3     0     1     0x2AE6B82A4923
    libjvm.so#objIterSetupArray     0.028     2     0     1     0x2AE6B82A6BDB
    libjvm.so#markAcquired     0.028     2     0     1     0x2AE6B829DBD3
    libjvm.so#mmPointerMatrixTryInsertAtIndex     0.028     2     0     1     0x2AE6B82BEFEB
    libjvm.so#mmPointerMatrixClear     0.028     2     0     1     0x2AE6B82BF61C
    libjvm.so#objPoolMarkWeakConcurrently     0.028     2     0     1     0x2AE6B82A5358
    libjvm.so#qBitSetFindFirstNonClearedWord     0.014     1     0     1     0x2AE6B82C888E
    libjvm.so#utilCounterToNanos     0.014     1     0     1     0x2AE6B8313B53
    libjvm.so#waitForLockIfNeededAndMarkAcquired     0.014     1     0     1     0x2AE6B829DC30
    libjvm.so#vmtLinkData     0.014     1     0     1     0x2AE6B8325B2E
    libjvm.so#mmBitsIsObjectMarkedGrey     0.014     1     0     1     0x2AE6B82ED7E9
    libjvm.so#qBitSetFindLastSetBitInWord     0.014     1     0     1     0x2AE6B82C8854
    libjvm.so#mark_writebarriers     0.014     1     0     1     0x2AE6B8250EEA
    libjvm.so#signalNextInLockQueueIfNeeded     0.014     1     0     1     0x2AE6B829DF52
    libjvm.so#mmGetUsingMatrixes     0.014     1     0     1     0x2AE6B819F33C
    libjvm.so#ptGetThreadId     0.014     1     0     1     0x2AE6B82BD9ED
    libc.so.6#memset     0.014     1     0     1     0x3CC0A7A000
    libjvm.so#setupNodeForSelf     0.014     1     0     1     0x2AE6B829DD87
    libc.so.6#_int_free     0.014     1     0     1     0x3CC0A714E0
    libjvm.so#mmAddChunkToList     0.014     1     0     1     0x2AE6B830977C
    libjvm.so#vmtiUnlinkData     0.014     1     0     1     0x2AE6B8325B4A
    libjvm.so#nativeLockInSuspendCritical     0.014     1     0     1     0x2AE6B829E0E3
    libjvm.so#mmSweepHeapPart     0.014     1     0     1     0x2AE6B830989A
    libjvm.so#mmBalanceWorkSetSwapPackets     0.014     1     0     1     0x2AE6B817A647
    libc.so.6#_int_malloc     0.014     1     0     1     0x3CC0A71E80
    libjvm.so#charToJlcType     0.014     1     0     1     0x2AE6B8253633
    unknown#unknown functions     0     0     0     1     0x2AE6B8597090
    Running with nativemethods=false, I see the following under hot methods
    Method     Percent(%)     #Samples     Optimized     Native     Method Id.
    jrockit.vm.Locks.monitorExitSecondStage(Object)     50     1     1     0     0x161D30D0
    com.tangosol.coherence.component.util.daemon.queueProcessor.service.grid.ClusterService.onNotify()     50     1     1     0     0x169D2C70
    com.tangosol.coherence.component.util.daemon.queueProcessor.packetProcessor.PacketReceiver.onNotify()     0     0     1     0     0x1551C050
    com.tangosol.coherence.component.util.queue.ConcurrentQueue.checkFlush(int)     0     0     1     0     0x151C2180
    java.lang.Thread.run()     0     0     0     0     0x14E98EB0
    jrockit.vm.RNI.c2java(long, long, long, long, long)     0     0     0     0     0x14C07830
    unknown#unknown functions     0     0     0     1     0x2AE6B8597090
    com.tangosol.coherence.component.util.Daemon.run()     0     0     0     0     0x15CFEBC0
    com.tangosol.coherence.component.util.queue.ConcurrentQueue.add(Object)     0     0     1     0     0x15ED6B00
    com.tangosol.coherence.component.util.queue.ConcurrentQueue.onAddElement()     0     0     1     0     0x151C9C20
    com.tangosol.coherence.component.util.queue.ConcurrentQueue.flush(boolean)     0     0     1     0     0x1618CAD0
    Thanks,
    Jason

  • Unusually high cpu usage with iMovie 6.0.3

    I'm having trouble with very high cpu-usage. Just the open imovie app is taking up about 50%, during playback it sometimes peaks over 100%! The project file is pretty big (about 30 gig), but that is mainly because of the amount of footage imported into it. The movie itself is about 25 minutes in length. There is some audio editing going on: some soundeffects, musicfiles (no drm-protection), audio commentary that i recorded within imovie. I know that imovie has trouble when there is a lot of audio/audio editing involved and this project is probably a little more complex than other stuff i did in imovie, but i never had such problems. i can hardly use playback anymore. I recently updated Quicktime to 7.6.4 and Perian to version 1.2.1. Any ideas what's going on or how to work around the problems? Since the movie is about 80% finished i don't really want to start all over again. Thanks in advance for your input!

    Hi Klaus1
    I have several plug-ins by cfx and the slick volumes 4, 6 8 and 10. I can post a list of all of them if you like. Up to now they never made any trouble, but you'll never know...
    The edit in the timeline is about 25 minutes long. But the project file contains captured dv-footage of about 2 hours, so that alone adds up to something like 26 GB. Then there are a few rendered effect-clips done with some of the plug-ins like stabilizing or color correction which also add to the 30 GB, as well as some audio-files (some music, my voice-over commentary). I emptied the trash several times while working on the movie. At this moment there are only a few MB of erased audio in it.
    It all sounds a bit like this is an insanely huge and complex project, but as i said, i have done projects like this in imovie without the massive cpu-usage. I'd like to continue to use imovie, but if this problem keeps coming up with future projects, i might as well take the step and switch to Final Cut Express.
    For now I will try your idea of exporting the movie as it is now and open it in a new project file.
    Thanks for your help and input so far!

  • [help] high cpu usage with flash (Hello adobe developer)

    Running youtube or facebook games, here's what I found. CPU usage rises to 90-100% or 90-100 % of a core.
    Tested in XP32/Win7 64. Clean setups. Tested with Flash 9, 10, 10.1 rc's. Used uninstallers, reinstalled and so on. Googled on this, read many threads, such as granting permission on several files. Tested with IE, Firefox, Chrome. SAME stuff. Tested on an e8400 with P35 chipset, i3 530 with P55 chipset, e7400 with nvidia ion chipset, tested with 7[3|6]00gt's, gts 250.. So yes, I've tried a lot of things. And many different drivers too. I am now only pointing fingers at flash.
    PC gets sluggish, laptops run out of battery fast. I can usually fix a lot of technicals issues on my own, but I'm TOTALLY stuck here. I should also add that, cpu usage rises only when there is motion. I can watch an .avi movie or play some 3D game, and they won't suck the cpu totally. I can remember in the past, flash won't do this. Flash won't drag the system down. Something is SERIOUSLY wrong.
    Can an Adobe dev comment please?

    I find it strangely odd that you've never seen this phenomenon, but at least you must have heard of it. Google flash high cpu usage. Facebook games flash lag. Or something alike. Mind moving my thread there? So there won't be a dupe thread.
    I posted a similar thread in mozilla forums to see what they have to see, since i notice lag is more apparent in firefox than in ie, although both hog up cpu.
    As you can see, I'm not alone.
    http://forums.mozillazine.org/viewtopic.php?f=38&t=1913819
    My installation _of_ what? Let's see, I tried to replicate this in the most bare environment. With nothing else installed, and  default Windows 7 drivers, I installed flash from the web, plugin only first, then activex, did the testing, same stuff. Installed OLD 183 drivers, tested with 197 drivers, then 256 beta drivers. Same deal.

  • Config Manager Agent - after Hardware Inventory High CPU Usage with WMIPRSVE and very fast empty Battery

    Hi there,
    since a few days there is on some machines (40-60) a high cpu usage on one core (quad core cpu machines) with the WMIPRSVE.EXE if the HARDWARE INVENTORY CYCLE started.
    i try out some tests, read some forum articles and troubleshooting the WMI management but a real problem i doesn´t see.
    in some articles i read that hardware inventory runs about minutes up to more hours but some machines runs longer, someone more as 1 day.
    here an example of mine PC:
    at 8:07 i started Hardware Inventory Cycle, in the InventoryAgent.log i can see that some Collection Namespace are captured.
    after a few minutes there stopped and does nothing round about 5.9 hours or better, after 21436.097 Seconds.
    For any hints i am grateful. :)
    Inventory: *********************** Start of message processing. ***********************
    InventoryAgent 18.03.2015 08:09:56
    11088 (0x2B50)
    Inventory: Message type is InventoryAction InventoryAgent
    18.03.2015 08:09:56 11088 (0x2B50)
    Inventory: Temp directory = C:\WINDOWS\CCM\Inventory\Temp\
    InventoryAgent 18.03.2015 08:09:56
    11088 (0x2B50)
    Inventory: Clearing old collected files. InventoryAgent
    18.03.2015 08:09:56 11088 (0x2B50)
    Inventory: Opening store for action {00000000-0000-0000-0000-000000000001} ...
    InventoryAgent 18.03.2015 08:09:56
    11088 (0x2B50)
    CInvState::VerifyInventoryVersionNumber: Mismatch found for '{00000000-0000-0000-0000-000000000001}': 4.2 vs. 0.0
    InventoryAgent 18.03.2015 08:09:56
    11088 (0x2B50)
    Inventory: Version number mismatch; will do a Full report.
    InventoryAgent 18.03.2015 08:09:56
    11088 (0x2B50)
    Inventory: Action=Hardware, ReportType=ReSync, MajorVersion=5, MinorVersion=0
    InventoryAgent 18.03.2015 08:09:56
    11088 (0x2B50)
    Inventory: Initialization completed in 0.141 seconds
    InventoryAgent 18.03.2015 08:09:56
    11088 (0x2B50)
    Collection: Namespace = \\localhost\root\Microsoft\appvirt\client; Query = SELECT __CLASS, __PATH, __RELPATH, CachedLaunchSize, CachedPercentage, CachedSize, LaunchSize, Name, PackageGUID, TotalSize, Version, VersionGUID FROM Package; Timeout = 600 secs.
    InventoryAgent 18.03.2015 08:09:56
    7836 (0x1E9C)
    Failed to get IWbemService Ptr for \\localhost\root\vm\VirtualServer Namespace: 8004100E
    InventoryAgent 18.03.2015 08:10:02
    7836 (0x1E9C)
    Failed to enumerate instances of VirtualMachine: 8004100E
    InventoryAgent 18.03.2015 08:10:02
    7836 (0x1E9C)
    Collection: Namespace = \\.\root\cimv2\sms; Query = SELECT __CLASS, __PATH, __RELPATH, AddressWidth, BrandID, CPUHash, CPUKey, DataWidth, DeviceID, Family, Is64Bit, IsHyperthreadCapable, IsMobile, IsTrustedExecutionCapable, IsVitualizationCapable, Manufacturer,
    MaxClockSpeed, Name, NormSpeed, NumberOfCores, NumberOfLogicalProcessors, PCache, ProcessorId, ProcessorType, Revision, SocketDesignation, Status, SystemName, Version FROM SMS_Processor; Timeout = 600 secs.
    InventoryAgent 18.03.2015 08:10:02
    7836 (0x1E9C)
    Collection: Namespace = \\.\root\CCM\powermanagementagent; Query = SELECT __CLASS, __PATH, __RELPATH, Requester, RequesterInfo, RequesterType, RequestType, Time, UnknownRequester FROM CCM_PwrMgmtLastSuspendError; Timeout = 600 secs.
    InventoryAgent 18.03.2015 08:10:03
    7836 (0x1E9C)
    Collection: Namespace = \\.\root\cimv2; Query = SELECT __CLASS, __PATH, __RELPATH, Availability, Description, DeviceID, Manufacturer, Name, Status FROM Win32_IDEController; Timeout = 600 secs.
    InventoryAgent 18.03.2015 08:10:03
    7836 (0x1E9C)
    Collection: Namespace = \\.\root\cimv2\sms; Query = SELECT __CLASS, __PATH, __RELPATH, BinFileVersion, BinProductVersion, Description, ExecutableName, FilePropertiesHash, FilePropertiesHashEx, FileSize, FileVersion, HasPatchAdded, InstalledFilePath, IsSystemFile,
    IsVitalFile, Language, Product, ProductCode, ProductVersion, Publisher FROM SMS_InstalledExecutable; Timeout = 600 secs.
    InventoryAgent 18.03.2015 08:10:03
    7836 (0x1E9C)
    Collection: Namespace = \\.\root\cimv2; Query = SELECT __CLASS, __PATH, __RELPATH, DefaultIPGateway, DHCPEnabled, DHCPServer, DNSDomain, DNSHostName, Index, IPAddress, IPEnabled, IPSubnet, MACAddress, ServiceName FROM Win32_NetworkAdapterConfiguration; Timeout
    = 600 secs. InventoryAgent
    18.03.2015 14:06:43 7836 (0x1E9C)
    Collection: Namespace = \\.\root\Nap; Query = SELECT __CLASS, __PATH, __RELPATH, description, fixupState, friendlyName, id, infoClsid, isBound, percentage, registrationDate, vendorName, version FROM NAP_SystemHealthAgent; Timeout = 600 secs.
    InventoryAgent 18.03.2015 14:06:43
    7836 (0x1E9C)
    Collection: Namespace = \\.\root\cimv2\sms; Query = SELECT __CLASS, __PATH, __RELPATH, AdditionalProductCodes, CompanyName, ExplorerFileName, FileDescription, FilePropertiesHash, FileSize, FileVersion, FolderPath, LastUsedTime, LastUserName, msiDisplayName,
    msiPublisher, msiVersion, OriginalFileName, ProductCode, ProductLanguage, ProductName, ProductVersion, SoftwarePropertiesHash FROM CCM_RecentlyUsedApps; Timeout = 600 secs.
    InventoryAgent 18.03.2015 14:06:43
    7836 (0x1E9C)
    Collection: Namespace = \\.\root\cimv2; Query = SELECT __CLASS, __PATH, __RELPATH, BankLabel, Capacity, Caption, CreationClassName, DataWidth, Description, DeviceLocator, FormFactor, HotSwappable, InstallDate, InterleaveDataDepth, InterleavePosition, Manufacturer,
    MemoryType, Model, Name, OtherIdentifyingInfo, PartNumber, PositionInRow, PoweredOn, Removable, Replaceable, SerialNumber, SKU, Speed, Status, Tag, TotalWidth, TypeDetail, Version FROM Win32_PhysicalMemory; Timeout = 600 secs.
    InventoryAgent 18.03.2015 14:07:02
    7836 (0x1E9C)
    Collection: Namespace = \\.\root\cimv2; Query = SELECT __CLASS, __PATH, __RELPATH, Availability, Description, DeviceID, InstallDate, Manufacturer, Name, PNPDeviceID, ProductName, Status FROM Win32_SoundDevice; Timeout = 600 secs.
    InventoryAgent 18.03.2015 14:07:02
    7836 (0x1E9C)
    Collection: Namespace = \\.\root\cimv2; Query = SELECT __CLASS, __PATH, __RELPATH, Caption, ClassGuid, ConfigManagerErrorCode, ConfigManagerUserConfig, CreationClassName, Description, DeviceID, Manufacturer, Name, PNPDeviceID, Service, Status, SystemCreationClassName,
    SystemName FROM Win32_USBDevice; Timeout = 600 secs.
    InventoryAgent 18.03.2015 14:07:12
    7836 (0x1E9C)
    Collection: 62/74 inventory data items successfully inventoried.
    InventoryAgent 18.03.2015 14:07:12
    7836 (0x1E9C)
    Inventory: Collection Task completed in 21436.097 seconds
    InventoryAgent 18.03.2015 14:07:12
    7836 (0x1E9C)
    Inventory: 12 Collection Task(s) failed. InventoryAgent
    18.03.2015 14:07:12 7836 (0x1E9C)
    Inventory: Temp report = C:\WINDOWS\CCM\Inventory\Temp\25bf01b2-12fc-4eea-8e97-a51b3c75ba50.xml
    InventoryAgent 18.03.2015 14:07:12
    7836 (0x1E9C)
    Inventory: Starting reporting task. InventoryAgent
    18.03.2015 14:07:12 7552 (0x1D80)
    Reporting: 4381 report entries created. InventoryAgent
    18.03.2015 14:07:13 7552 (0x1D80)
    Inventory: Reporting Task completed in 1.030 seconds
    InventoryAgent 18.03.2015 14:07:13
    7552 (0x1D80)
    Inventory: Successfully sent report. Destination:mp:MP_HinvEndpoint, ID: {5541A94A-BED9-4132-AE54-110CB6896F02}, Timeout: 80640 minutes MsgMode: Signed, Not Encrypted
    InventoryAgent 18.03.2015 14:07:13
    7552 (0x1D80)
    Inventory: Cycle completed in 21453.570 seconds
    InventoryAgent 18.03.2015 14:07:30
    7552 (0x1D80)
    Inventory: Action completed. InventoryAgent
    18.03.2015 14:07:30 7552 (0x1D80)
    Inventory: ************************ End of message processing. ************************
    InventoryAgent 18.03.2015 14:07:30
    7552 (0x1D80)
    Collection: Namespace = \\.\root\cimv2; Query = SELECT __CLASS, __PATH, __RELPATH, Caption, ClassGuid, ConfigManagerErrorCode, ConfigManagerUserConfig, CreationClassName, Description, DeviceID, Manufacturer, Name, PNPDeviceID, Service, Status, SystemCreationClassName,
    SystemName FROM Win32_USBDevice; Timeout = 600 secs.
    InventoryAgent 18.03.2015 14:07:12
    7836 (0x1E9C)
    Collection: 62/74 inventory data items successfully inventoried.
    InventoryAgent 18.03.2015 14:07:12
    7836 (0x1E9C)
    Inventory: Collection Task completed in 21436.097 seconds
    InventoryAgent 18.03.2015 14:07:12
    7836 (0x1E9C)
    Inventory: 12 Collection Task(s) failed. InventoryAgent
    18.03.2015 14:07:12 7836 (0x1E9C)
    Inventory: Temp report = C:\WINDOWS\CCM\Inventory\Temp\25bf01b2-12fc-4eea-8e97-a51b3c75ba50.xml
    InventoryAgent 18.03.2015 14:07:12
    7836 (0x1E9C)
    Inventory: Starting reporting task. InventoryAgent
    18.03.2015 14:07:12 7552 (0x1D80)
    Reporting: 4381 report entries created. InventoryAgent
    18.03.2015 14:07:13 7552 (0x1D80)
    Inventory: Reporting Task completed in 1.030 seconds
    InventoryAgent 18.03.2015 14:07:13
    7552 (0x1D80)
    Inventory: Successfully sent report. Destination:mp:MP_HinvEndpoint, ID: {5541A94A-BED9-4132-AE54-110CB6896F02}, Timeout: 80640 minutes MsgMode: Signed, Not Encrypted
    InventoryAgent 18.03.2015 14:07:13
    7552 (0x1D80)
    Inventory: Cycle completed in 21453.570 seconds
    InventoryAgent 18.03.2015 14:07:30
    7552 (0x1D80)
    Inventory: Action completed. InventoryAgent
    18.03.2015 14:07:30 7552 (0x1D80)
    Inventory: ************************ End of message processing. ************************
    InventoryAgent 18.03.2015 14:07:30
    7552 (0x1D80)

    InventoryAgent 18.03.2015 08:10:03
    7836 (0x1E9C)
    Collection: Namespace = \\.\root\cimv2; Query = SELECT __CLASS, __PATH, __RELPATH, DefaultIPGateway, DHCPEnabled, DHCPServer, DNSDomain, DNSHostName, Index, IPAddress, IPEnabled, IPSubnet, MACAddress, ServiceName FROM Win32_NetworkAdapterConfiguration; Timeout
    = 600 secs. InventoryAgent
    18.03.2015 14:06:43 7836 (0x1E9C)
    Collection: Namespace = \\.\root\Nap; Query = SELECT __CLASS, __PATH, __RELPATH, description, fixupState, friendlyName, id, infoClsid, isBound, percentage, registrationDate, vendorName, version FROM NAP_SystemHealthAgent; Timeout = 600 secs.
    InventoryAgent 18.03.2015 14:06:43
    7836 (0x1E9C)
    Looks like something in one or both of those wmi queries.  it goes from 8:10:03 to 14:06:43 right around there.  6 hours to do that... 
    try running those queries from wbemtest manually; and see which one just never finishes.
    Standardize. Simplify. Automate.

  • EA2: high CPU usage with large packages

    EA2 + Debian GNU/Linux + jdk1.6.0_04 + Pentium IV 2,8 GHz 1 GBytes RAM
    Opening large packages (> 6.000 rows) I have high CPU usage (100%) for about 50-60 seconds. Same problem when I working with these packages
    Ciao
    Davide

    Opening works fine for me, and memory seems to be
    contained. Working inside the package on occasions
    still boosts CPU like you.Attempting to edit an 800 line type body utilises 100% CPU as soon as typing starts.
    Windows XP Professional SP2
    Oracle Server 10.2.0.3
    Java 1.5.0_06
    Intel Pentium M 1.69GHz 2GB RAM

  • Incredibly high CPU usage with Flash plugin

    Hi all,
    I'm using Safari 4.0.3 with the last Flash Plugin version (10.0.32.18) that I just uninstalled and then reinstalled, and I got an incredibly high cpu usage while viewing an Youtube video.
    Here is a screenshot of Activity monitor that shows you the percentage.
    http://img256.imageshack.us/img256/7186/schermata20091106a13590.png
    Sometimes the Safari process reach even 50% while the FlashPlugin one runs at 110%-120%.
    Is that normal? With other browsers like Camino or Firefox, the CPU usage for the same video drops to 50%-60% max.
    Thank you,
    Silentheaven
    Message was edited by: Silentheaven

    HI,
    Try here.
    http://rentzsch.github.com/clicktoflash/
    Block evil Adobe Flash
    Flash only when you want it.
    One-click Flash loading
    View blocked Flash with just one click.
    Higher quality YouTube
    Play videos in QuickTime, not Flash.
    Website Whitelist
    Allow Flash on certain websites.
    *Lowered CPU usage*
    Browse the web more quickly.
    Better battery life
    Browse the web longer on your laptop.
    Less fan usage and heat
    Browse the web quietly and cooly.
    Automatic Updating
    Download updates when they're ready.
    Carolyn

  • High CPU usage with BT NetProtect plus

    Anyone else getting this problem? With no applications running I'm getting CPU usage of up to 100%

    I'm an IT engineer and have used McAfee since the early 90's without a problem but there is a problem with mcshield.exe slowing my machine down of in the past few months,  and after being unable to get any sense out of McAfee (as I am no longer their customer, I'm BT's), I thought I’d take a look at it myself.
    The problem has been all over the net for months and in my case, I traced the issue to a program called “Trusteer Rapport” which many banks are advising customers to install as extra online protection.  A part of its program that runs in the background called “RapportManagementConsul.exe” seems to be conflicting with mcshield.exe causing it to use up most of the CPU.
    I trust McAfee to protect me from the viruses and I wouldn’t like to uninstall Rapport in case my bank decides to use it as a get out clause if my account was hacked, and so what I do not is disable report unless I’m going onto a financial site that Rapport is monitoring but to be honest, it’s a lot of faffing about as it’s not just a matter of turning Rapport off, you then have to stop the “RapportManagementConsul.exe” file running in the background so it’s not a job for the non-technical.
    Hopefully, somebody will pass this onto the BT Tech guys and they will escalated the problem before both BT and McAfee get any more bad press and fix this on-going problem.

  • High CPU Usage with one client

    I work as a desktop support engineer. I've got a call that has been back and forth between departments that I believe to be an SCCM problem but I'm not involved in the back end of that, just desktop onsite type stuff, hardware, rebuilds etc...
    So I'm wondering if I can get some ammo to take to the SCCM team and hopefully get the problem resolved for the affected user.
    What happens is, one particular user, every time he logs onto a machine, from that moment on (all he needs to do is log on once, then log straight off) almost every night at a random time the CPU will starts behaving erratic around the 25% mark and will
    not stop until the machine is rebooted. After the reboot, all is well, until the next night. The RAM in this time will also behave odd. It goes up and down every 10-20 seconds. It starts at a particular figure, goes up a little to another figure, then back
    down to the previous, then back up again and so on. Obviously I'd expect the machine to mostly be sat idle, cpu usage around 0-5%, ram not moving, and this is the case with all other machines across our estate. The user likes to leave his machine on and logged
    in hence why he sees it often.
    Even if the machine is rebuilt, it will continue doing it if he has logged on previously, if we change the hostname in this rebuild, it doesn't, hence why I'm certain this is something to do with SCCM. Also, a level 3 guy has had a lot to do with this case
    too, he says that when the cpu is going crazy, its always to do with svchost.exe and the WMI, again, pointing to SCCM I think.
    Now, we don't have roaming profiles, software and patches are all installed by SCCM, I think we use 2012, but it may be 2007, I can find out if it will help.
    From what I've read, it looks like it could be corrupt superseeded update packages. But the question is then, if so, why does it only affect one user? Can it affect his personal id SCCM account or something? sorry, I don't know too much about how SCCM works,
    I have a rough idea, but its just that...Rough!
    Any help would be most appreciated as this call has been outstanding for months and it keeps on popping back into my queue saying things like, try rebuilding the client, well...yeah...read the history geniuses, we've done that many times, ruled hardware
    100% out and still it ends up back with us. Thankfully the bloke is really understanding and seems quite a problem solver himself, he's really intrigued to know whats happening now and has learnt to work around it.
    Many Thanks for any and all help given, I can provide logs and any diagnostic info that will help.

    Even if the machine is rebuilt, it will continue doing it if he has logged on previously, if we change the hostname in this rebuild, it doesn't, hence why I'm certain this is something to do with SCCM. Also, a level 3 guy has had a lot to do with this case
    too, he says that when the cpu is going crazy, its always to do with svchost.exe and the WMI, again, pointing to SCCM I think.
    Now, we don't have roaming profiles, software and patches are all installed by SCCM, I think we use 2012, but it may be 2007, I can find out if it will help.
    From what I've read, it looks like it could be corrupt superseeded update packages. But the question is then, if so, why does it only affect one user? Can it affect his personal id SCCM account or something? sorry, I don't know too much about how SCCM works,
    I have a rough idea, but its just that...Rough!
    Any help would be most appreciated as this call has been outstanding for months and it keeps on popping back into my queue saying things like, try rebuilding the client, well...yeah...read the history geniuses, we've done that many times, ruled hardware
    100% out and still it ends up back with us. Thankfully the bloke is really understanding and seems quite a problem solver himself, he's really intrigued to know whats happening now and has learnt to work around it.
    Many Thanks for any and all help given, I can provide logs and any diagnostic info that will help.
    I'm not seeing how this is a CM12 problem at all. Yes it might be a WMI problem but that doesn't mean that it has anything to do with CM12.
    Software Update are not deployed to a user they are deploied to a PC.
    Start with the basic.
    Have you check WMI health?
    What OS are you talking about?
    Have you applied all the WMI Software Updates to the PC?
    Are you sure that he doesn't have roaming profile?
    What happens when he logon to your healthy PC? Does the problem start? If so what then this is clearly NOT a CM12 problem but instead, a profile or application target to him that is the problem.
    What GPO are target to him?
    Garth Jones | My blogs: Enhansoft and
    Old Blog site | Twitter:
    @GarthMJ

  • High CPU usage with flash player

    hi ive just recently bought an emachines em250 netbook and when using most websites with flash it works ok normally around 30 - 40% cpu usage, however when i use itv player it increases the cpu usage to 95% meaning it runs slow. i am not running anything else in the background and when i check task manager it shows internet explorer and system idle are using all the cpu. I read that its a glith with flash player 10 and installing flash player 9 fixes the problem, but i have tried this and it doesnt. any suggestions? my operating system is windows xp.

    hi ive just recently bought an emachines em250 netbook and when using most websites with flash it works ok normally around 30 - 40% cpu usage, however when i use itv player it increases the cpu usage to 95% meaning it runs slow. i am not running anything else in the background and when i check task manager it shows internet explorer and system idle are using all the cpu. I read that its a glith with flash player 10 and installing flash player 9 fixes the problem, but i have tried this and it doesnt. any suggestions? my operating system is windows xp.

  • High CPU Usage With 2.6.32

    Hi
    Ever since the kernel update my CPU usage has its own will. Would it normally stay under 10%, does it now ad 20% while only moving a window around. (nothing else open) Scrolling up and down got me to 95%! (with firefox 1 tab open/nothing else open) And as you can imagine this is getting annoying. Is there a solution? Someone who could help me?
    I have Openbox as a WM. No DE.  /usr/bin/X -nolisten tcp uses almost always around 5% with tops to 40%.
    The problem occurs with my Acer Extensa 5230.
    Processor
    Intel® Celeron® Processor 900
    (1MB L2 cache, 2.20GHz, 800MHz FSB)
    Chipset
    Mobile Intel® GL40 Express
    Any more information? Logs? Errorfiles?

    Hi Klaus1
    I have several plug-ins by cfx and the slick volumes 4, 6 8 and 10. I can post a list of all of them if you like. Up to now they never made any trouble, but you'll never know...
    The edit in the timeline is about 25 minutes long. But the project file contains captured dv-footage of about 2 hours, so that alone adds up to something like 26 GB. Then there are a few rendered effect-clips done with some of the plug-ins like stabilizing or color correction which also add to the 30 GB, as well as some audio-files (some music, my voice-over commentary). I emptied the trash several times while working on the movie. At this moment there are only a few MB of erased audio in it.
    It all sounds a bit like this is an insanely huge and complex project, but as i said, i have done projects like this in imovie without the massive cpu-usage. I'd like to continue to use imovie, but if this problem keeps coming up with future projects, i might as well take the step and switch to Final Cut Express.
    For now I will try your idea of exporting the movie as it is now and open it in a new project file.
    Thanks for your help and input so far!

  • Constant SBBOD with high cpu usage

    Hi
    since a couple of days ago I constantly get the SBBOD (spinning beach ball of death) on a Mac mini 2011 with Lion 10.7.3.
    The system hangs up completely and the only this I can do is click around  and move the windows but the clicks don't do anything and at some point after that everything just stops responding.
    At this point I'm forced to do a hard reboot (power switch).
    After that the system works for a while and then gets the SBBOD again.
    During the SBBOD I can see syslog hogging all my cpu usage in activity monitor, but when I try to kill it or click into activity monitor the programm doesn't respond.
    I guessed that something else was spaming syslogd with messages but after the hard reboot I don't see anything in console.
    Since then I tried almost everything.
    - hardware test, the short and long one -> nothing found
    - repairing hard drive and permissions -> didn't help
    - S.M.A.R.T says  verified
    - PRAM and NVRAM reset
    - logged into guest account and started nothing -> SSBOD after ~hour
    - started into save mode and left the comp running -> SSBOD after ~hour
    - reformated(not zeroed) and reinstalled Lion(not from a backup) -> SSBOD after ~hour
    Currently I'm trying to disable syslogd to see if some other process hogs all my cpu load instead of it.
    I really hope one of you can help me, this thing is driving me nuts :/

    Repairing the permissions of a home folder in Lion is a complicated procedure. I don’t know of a simpler one that always works.
    Launch the Terminal application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Terminal in the page that opens.
    Drag or copy – do not type – the following line into the Terminal window, then press return:
    chmod -R -N ~
    The command will take a noticeable amount of time to run. When a new line ending in a dollar sign ($) appears below what you entered, it’s done. You may see a few error messages about an “invalid argument” while the command is running. You can ignore those. If you get an error message with the words “Permission denied,” enter this:
    sudo !!
    You'll be prompted for your login password, which won't be displayed when you type it. You may get a one-time warning not to screw up.
    Next, boot from your recovery partition by holding down the key combination command-R at startup. Release the keys when you see a gray screen with a spinning dial.
    When the recovery desktop appears, select Utilities ▹ Terminal from the menu bar.
    In the Terminal window, enter “resetpassword” (without the quotes) and press return. A Reset Password window opens.
    Select your boot volume if not already selected.
    Select your username from the menu labeled Select the user account if not already selected.
    Under Reset Home Directory Permissions and ACLs, click the Reset button.
    Select  ▹ Restart from the menu bar.

Maybe you are looking for

  • Site Web Analytics doesn't apply to all site collections...

    Hi, In one of the intranet site, the site web analytics seems to appear only gathering data for certain site. Is there something that I am missing out? Please remember to mark the replies as answers if they help and unmark them if they provide no hel

  • From m4v to dvd

    My dad is not computer savvy, he has a dvd player and that's it. I have bought him on iTunes a bunch of videos (NHL Retro) which are m4v files. I'm trying to find a way to burn those files into dvd player files using iDVD for instance, with no succes

  • Extents issue in Oracle 7  database

    In our live database the next largest extent was unable to fit in the next available largest extent. The disk space is also very less. The current storage setting for the tablespaces are as follows TABLESPACE_NAME INital_EXTENT NEXT_EXTENT MIN_EXTENT

  • Weblogic 11g Admin console - Admin Server Health shows "Warning"

    Hi, My env details : db 11.1.0.7, wls1033, RCU 11.1.1.3, soa 11.1.1.3, AIA11gR1 PS2 When I start only Admin server, Health shows "Ok" but when I start soa_server1, Admin Server Health becomes "Warning". When I checked "Health information details" for

  • File icon does not match application

    If I use Get Info to change the application associated with any file (e.g., Word to Pages, Quicktime to VLC, Numbers to Excel), the application assigned to open the file changes just fine, but the icon remains what it was originally. I have tried cha