Having issues with sending attachments via iMail to PC users

Having issues with sending attachments via iMail to PC users. Either they do not see all the attachments or the attachment comes across blank. Is there any suggested ways to resolve this?

You can also use Dropbox. 2GB free. Put files in the Public folder and you can send them links of the files instead.
You can use my referral link http://db.tt/MXNpy62 to create an account.

Similar Messages

Is anyone else having issues with sending / receiving messages since ios7 upgrade

Is anyone else having issues with sending / receiving messages since ios7 upgrade

I found this link, and am trying it right now to see if it helps.
http://forums.macrumors.com/showthread.php?t=1647944&highlight=ios7+imessage+tro uble

Having issues with profile manager on 10.9 loosing users/device assignments.

I'm having issues with profile manager on 10.9 loosing users/device assignments. Luckly I only have arround 70 devices added so far. The first time it happened I thought it was just a freak thing, but it has just happened again. What I find weird is nothing on the server was changed, no devices added. So when this happens my users phones lose access to email, because I'm using variables, which rely on the user being assigned to the device. Anyone know how to fix this, and if not. Does anyone know how to backup and restore just profile manager in 10.9. Thanks.

I enabled all users in my AD "Domain Users" group access to "Profile Manager". I had also initially enabled "Profile Manager" access for a few individual users. Those users did not loss the device assignments. I'm not absolutely sure why/if allowing access for a group is causing this issue. Enabling access for each person would be very time consuming.... Maybe adding access to the individual users is importing that user into OD?

Having issues with Sending Emails from Excahnge 2013

hope you can help,
I am learning Excahnge 2013 for the first time, and I have just build my first Excahnge 2013 server on a Windows 2012 server.
I follow the steps from "petenetlive.com" on how to install the server and services. as this is a test bed server, I haven't gone as far as getting the Cert's.
I have tried to different domain names from JCPPhotos.local
and jessphotos.co.uk but for some reason, I can't get the exchange to send out a test email, but I am able to send emails within exchange to internal email accounts with no issues.
at the moment as this is a test bed, I have all the services on the same server, AD, Domain Contractor, DNS, but once I have this all sorted out then I will split the services onto different servers.
I have at the moment disable all firewalls on the server, and opened all ports on my main firewall for all out going traffic.
I have set up the send connecter as shown by Petenetive, and as the domain name is the same as my public domain name I have done anything else. has anyone else had the same issues, and if so then can you please advice.

I have check the Queue Viewer, and it looks like all the test emails are blocked, within exchange as it is showinNext
Hop Domain = netsmart.org.uk
Delivery Type = DNSConnectorDelivery
Status = Retry
Message Count 2
Next Retry 04 March 2015 08:20:10
Last Error 400.4.4.7
here is the log file
Identity: SVREXC01\13\8589934602
Subject: TEST 1
Internet Message ID: <[email protected]>
From Address: [email protected]
Status: Ready
Size (KB): 4
Message Source Name: SMTP:Default SVREXC01
Source IP: 172.16.1.13
SCL: -1
Date Received: 03/03/2015 14:07:40
Expiration Time: 05/03/2015 14:07:40
Last Error: 400 4.4.7 Message delayed
Queue ID: SVREXC01\13
Recipients: [email protected];2;2;[{LRT=};{LED=400 4.4.7 Message delayed};{FQDN=};{IP=}];0;CN=Send-Connector,CN=Connections,CN=Exchange Routing Group (DWBGZMFD01QNBJR),CN=Routing Groups,CN=Exchange
Administrative Group (FYDIBOHF23SPDLT),CN=Administrative Groups,CN=JessPhotos,CN=Microsoft Exchange,CN=Services,CN=Configuration,DC=jessphotos,DC=co,DC=uk;0
with Telnet, I tried to open a connection by        open *.*.*.* 25
I type a Nslookup command, but I got a error message   = 500 5.3.3 Unrecognized command
I then tried to use the Telnet a test email with this and I got a error at each command line    500 5.3.3 Unrecognized command
Destination SMTP server   mail1.netsmart.org.uk = "this was a guest as this is a hosted domain"
Source domain   jessphotos.co.uk
Sender's e-mail address
[email protected]
Recipient's e-mail address   [email protected]
Message subject   Test from JessPhotos
Message body   This is a test message
with the EXRCA outbound
I enter in the details,      outbound IP Address = Default gate "I was guesting on this"
for the email address I enter in my local
[email protected], and click Perform test, and I got a error, saying that it didn't like the IP Address
I also tried the IP Address of the Exchange server, which again didn't work
any ideals ?

I'm often having issues with clients not seeing or being able to open attachments, font formatting changes (on the pc end) and the inability to use HTML signatures to promote our company brand.

I'm often having issues with clients not seeing or being able to open attachments, font formatting changes (on the pc end) and the inability to use HTML signatures to promote our company brand.

I imagine your clients must be using Outlook, which is seriously broken when it comes to e-mail standards, especially HTML e-mail. You can work around the issues with Outlook by only sending plain-text e-mails and making sure that, in the Edit -> Attachments menu, the last two options are checked. Unfortunately, that means that HTML signatures are out.
If you need something with a fancy layout, either attach a PDF file to the e-mail or include a link to a website in the e-mail.

I am having issues with my web module on Lightroom 4 (Mac OS 10.9.5). "an unknown error occurred" while trying to upload to my FTP (no changes in my FTP). Bandaid fix was to export to local folder and upload via Filezilla. However, now that is no longer w

I am having issues with my web module on Lightroom 4 (Mac OS 10.9.5). "an unknown error occurred" while trying to upload to my FTP (no changes in my FTP). Bandaid fix was to export to local folder and upload via Filezilla. However, now that is no longer working and although upload completes, the URL takes you to a "Forbidden - do not have permission to read this file" page. Lightroom is changing the permissions of each file to 000 instead of 644 for index files and 755 for all others. How can I change the permissions settings in Lightroom?

I am having issues with my web module on Lightroom 4 (Mac OS 10.9.5). "an unknown error occurred" while trying to upload to my FTP (no changes in my FTP). Bandaid fix was to export to local folder and upload via Filezilla. However, now that is no longer working and although upload completes, the URL takes you to a "Forbidden - do not have permission to read this file" page. Lightroom is changing the permissions of each file to 000 instead of 644 for index files and 755 for all others. How can I change the permissions settings in Lightroom?

TS1398 After the recent update of iOS 7.0.6 my phone is having issues with wifi connectivity. It gets disconnected most of the time. It is very toublesome while watching videos, sending pics, chatting and so on. Please advise. Thank you.

After the recent update of iOS 7.0.6 my phone is having issues with wifi connectivity. It gets disconnected most of the time. I went through support page and done with "Reset Network settings" too but it doesn't help. It is very toublesome while watching videos, sending pics, chatting and so on. Please advise.
It works fine in LTE network. The problem is with WIFI only.
Thank you.

Hey Siddh.s!
Here is an article that will help you troubleshoot this issue with your Wi-Fi connections:
iOS: Troubleshooting Wi-Fi networks and connections
http://support.apple.com/kb/ts1398
Thanks for using the Apple Support Communities. Have a good one!
-Braden

I'm having issues with iCloud backup with comcast since iO6 update

I'm having issues with iCloud backup with comcast since iO6 update. I'm able to back via work wifi but not at home. Any ideas?

Hi BmoreHunter.
     As far as using the bridge mode method you'd need to see what CLJDOhas to say, as that user is the only one that I see in this thread who used this method. The method that worked for me is different. I went out and bought a new modem. This made the most sense to me since the firmware in the unit that comcast gave me had issues and I am paying to rent the thing, I figured that I'll save some money if I just buy my own.
     I ended up purchasing a motorola SURFboard eXtreme (model SB6121) for $70 (happened to be on sale) from my local Target. For another $7 I was able to secure a 2yr warranty against failure, which was my only hesitation in buying vs renting.
     This modem should work just fine for you since you are a comcast customer. If you decide to go with a different modem, the important thing is to make sure that you purchase a modem that is compatible with the technology that your ISP (in this case comcast) uses. Also DOCSIS 3.0 is the "flavor" of cable modem you want as it will give you better performace than DOCSIS 2.0 devices (such as an older Motorola SURFboard).
     Once you buy the modem you will have to call comcast and have them add the modem to your account. They'll ask for the MAC address of the modem, then send a re-set signal to it, so make sure you are home when you call and can connect/disconnect the modem as needed. After your modem is added to your account and up and running you can then connect your new AirPort Express to the modem (via ethernet cable) and you should be all set!

I am having issues with installing a Ricoh MP C2500 printer on Lion in my MBPro Ci7

I am having issues with installing a Ricoh MP C2500 printer on Lion in my MBPro Ci7 Where is appletalk or the replacement?
My it guy has set all the Ricoh (The only brand of printers we use.) to enable Appletalk. I am unable to see how to enable appletalk or an equivalent on Lion and have spent 3 hours now searching for it. If I connect to the printer via TCP/IP it prints random characters. I have a Ricoh working for another moddle but I am needing to use this machine. HELP!!!!!

AppleTalk has been gone eons ago. Connect via USB and see what happens. If you are networking the printer then advise on your connection set up.

I downloaded CS6 and am having issues with my print driver. It is not compatible with the HP 2600n and have tried to download drivers given to me by adobe ( (Jupiter 3) but it is not working. after a few days. Its a temporary fix and is still looking for

I downloaded CS6 and am having issues with my print driver. It is not compatible with the HP 2600n and have tried to download drivers given to me by adobe ( (Jupiter 3) but it is not working. after a few days. Its a temporary fix and is still looking for the HP driver when i boot up. It also will not save in any print or postscript format. Does anyone know how to fix?
Currently use a Mac with the latest Mavericks 10.9.4

Oh boy! Acting kind of weird seems to be an understatement, aquaequus!
What type of troubleshooting were we able to do with you? I want to make sure that we can get some sort of resolution for this problem.
It is quite possible the battery door may get your phone in working order again. I'm not sure if the store has it in stock, but it is available in our warehouse for $14.99 which can be ordered via customer service.
Tamara H.
Follow us on Twitter @VZWSupport

TS1702 Is anyone else having issues with the most recent Facebook update? I updated it yesterday and now it won't open. I have uninstalled and reinstalled the app, but it still fails to open! Any suggestions?

Is anyone else having issues with the most recent Facebook app update? I updated it on my iPad 2 yesterday, now it will not open app at all. I have restarted iPad, uninstalled app and reinstalled, several times and still it will not work! Any suggestions? I have also closed the append still no results!

I just started having this yesterday. It's only happened twice, but it's annoying. My wife texted me that she was coming home last night, and it showed up immediately on my iPod Touch but not my iPhone. I opened my iPhone and it soon updated. Worked fine after that. Then just a moment ago today my wife texted me and the same thing happened. I heard my iMac and iPod Touch receive the message but it didn't display on my phone until I opened the phone and it showed up again a little bit thereafter. I suppose I'll send Apple some feedback on this issue.

Is anyone having issues with Android version 4.3 for Galaxy III throwing in zeroes into text messages?

I received a message on Christmas Eve that a free update was available for my Samsung Galaxy III. I accepted the download and discovered some enhancements and fixes that I liked (finally, my voicemail icon displays the number of waiting voicemails that I have!) but I've noticed to glaring issues:
1. When I send text messages that include numbers (a phone number for example) the OS throws in random zeroes into the number. I have to usually touch the ENTER key and type the number on a new line and play around with it until the number stays in the message correctly.
2. I've had occasional lockups using the media hub which, when I do a restart, causes my settings to revert to the default factory settings....kind of a pain.
There may be other issues.
Q. Has anyone out there experienced this same thing?
Q. Is Google going to fix these issues? I noticed that on Christmas day a half dozen or so updates were made, but these to things still are a problem.
Q. Also, the Verizon Wireless Software Upgrade Assistant on my laptop insists that my version is not supported. I can still access photos and music, but it's a little annoying...

I'm sorry you're having issues with your phone after your update BigLouie1124. I recommend enabling safe mode to see if any of your apps are causing issues with your new software. If so, you can remove them. Here are the steps http://vz.to/1cD0kqT . If you continue to have issues the last step would be a factory reset to clear up some of your issues http://vz.to/JCsr33 . Please keep us posted and continue to clear unwanted message threads and clear your browser history periodically.
KinquanaH_VZW
Follow us on Twitter @vzwsupport

IPhoto: trouble with sending photos via gmail.

For some reasons, for about one or two months ago start having troubles with sending photos from iPhoto via gmail.
It used to work perfectly, but now refuses to send photos. Pop up message says that there are some trouble with accessing accounts.
Once I restart my computer it works well again.

Hello ilya,
In Mail's Window Menu, choose Connection Doctor, any red dots for status, if so what is the message?
Then click the Show Details button & Check again.
Mail: Can't send messages, "Cannot send message using the server smtp.xxxxx.com" alert appears...
http://support.apple.com/kb/TS1482

Anyone else having issues with third party routers...

Last week I started having issues with my Asus RT-N66U where certain wireless devices e.g. PS3, Xbox 360, Laptop, etc. have issues connecting to the internet (the PS3 reporting a DNS issue) even after I replaced it with a second rt-n66u.
I then tried using the HH3 I got with BT and have none of these problems.
Back on the Asus I tried a manual DNS (BTs 62.6.40.178 and 62.6.40.162) but these are having issues as well although strangely it will work fine if I use it purely as a wireless access point via the HH3 (With HH3's internal wifi disabled), right now I'm testing it again with Google's DNS but I want to know, is anyone else having any issues?

Is your firmware up to date? http://support.asus.com/Download.aspx?SLanguage=en&m=RT-N66U+%28VER.B1%29&os=8

I'm having issues with connecting my iPhone 4 to iTunes?

Here's some information:
Apple product: iPhone 4
Computer: Windows 8 (originally) to Windows 8.1 (upgraded version)
Okay, I'm having issues with connecting my iPhone 4 to iTunes. I've connected it via U.S.B. and now everything's not working right the 10th time. Am I to redownload the iTunes software once again or will I never be able to add music anymore?

OffTime wrote:
What do you mean with logging?
Hans
Close any open applications.
Click the Apple icon top left of the screen.
Select the bottom option in the cascading menu: Log Out (your user name).
Log in a Guest.
This will dertermine if there is a problem with your Admin account.
Al

Having issues with sending attachments via iMail to PC users

Similar Messages

Maybe you are looking for