Having issues with syncing 23.98 HD video to 24fps audio

Hello everyone,
I'm working on a feature that was shot on the Sony EX3 at a frame rate of 23.98NDF (1920 * 1080 HD). I am trying to sync it to audio that was recorded at 24fpsNDF with a sample rate of 48khz and a bit rate of 24.
When I merge the two together the audio seems too slow for the video. I checked the metadata of the video clips and it reads that the onboard mic was recording at a sample rate of 48khz and a bit rate of 16. Could that possibly be an issue?
I've search the FCP manual on what to do as well as a couple of forums but I have not found a real solution to my problem. If you could please help me out by either explaining what I should do or sending me a link as to where I can find the answer I am searching for I would greatly appreciate it since time is of the essence for me.
Thank you,
Ian

First,
Kick the one that made the decision to work this way.
Second,
Kick him again...
What happens is that BWF does NOT hold timecode, but 'samples after midnight'
This means that TC 00:00:02:00 is written as 96000
(Your sampling rate is 48000, times two seconds is 96000)
But DF and NDF do not run at the same timebase. (NDF TC runs slower, but note the actual video does NOT)
From memory you can import the BWF with another setting than your project, perhaps that'll save your butt.
My advice, go to Andreas' site (www.spherico.com) and look around there.
He has written a lot about the subject, and your answer must be there.
hth,
Bouke

Similar Messages

Having issue with Syncing Events from Iphoto to Apple Tv

All of a sudden I have multiple events of the same title but different amount of photos when i try to sync my photos to apple tv. Iphoto is fine, nothing is changed but when I go over to itunes to sync I see like 10 different Events with same name. EVERYTHING is multiplied but there is no rhyme or reason to it. !!!!! Apple has done some system/app updates but they are so frequent that I don't ever pay attention to what is being updated I just click to allow the process. I believe this occurred after one of the updates, I have 2 Apple TV's AT1 and AT2. AT2 is a nightmare to begin with because it was constantly getting kicked off the network but now that isn't the issue. Now it isn't showing current syncs which doesn't make sense because I thought this one streamed everything directly. Either way---APPLE TV is having issues and I can't get my EVENTS straightened out, HELP!!!!!

I've also noticed this started happening... Its something with iTunes, because both my old Apple TV's and my iPhone and iPad all show multiple events for the same event... Lots of them! So many its hard to tell what to sync now. When I click on any of my devices photos tab in iTunes they are all exactly the same. Not sure how to fix it...

I am having issues with syncing my calender and contacts

I would like for the changes that I make on my iphone to be primary. I have sync issues with the calender and contacts. New contacts get erased and some contacts are doubles as well as email addresses. My calender entries have been erased on sync. Can someone please help???

Check the parameters in your email account against what is recommended by your email provider.
Settings > Mail, Contacts, Calendars > account
Have you contacted the support contact at your email provider?

Having issues with syncing my ipod.

I am unsure if it's my ipod or itunes messing around, but since the update to 9.1, everytime i attempt to sync my ipod, it frezzes my laptop. After i disconnect it, it comes up with the message "the ipod 'nick's' cannot be synced. The disk could not be read from or written to". I have tried the 5 'r's more than once each, except for restore, as it doesnt show up in itunes and i don't know how to restore it without it. I also tried downgrading back to 9.0.3 and i still had the problem. I always safely disconnect my ipod aswell.
Any ideas on what's wrong? and anyone know how to restore an ipod without using itunes?

Restore...
Note that it's easy to do but it's quite time-consuming. Connect via cable to the computer that you use for sync. From iTunes, select the iPad/iPod and then select the Summary tab. Follow directions for Restore and be sure to say "yes" to the backup. You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod. Again, say "yes."

I'm having issues with syncing my music.

Recently, I upgraded my computer to Windows 7, from Vista. I've recovered all my music, and ringtones from my old windows. Supposedly authorised my new Windows for syncing. I currently have 19 GBs of music on my phone, which I'm reducing to 16.2 GBs.. but everytime I go to sync my music. It keeps telling me that it requires 16.5 GBs, which means it's not erasing the music already on my phone..? It won't let me access its music through my computer or iTunes (via manual music adding or whatever it's called) .. I don't know how to clear the music. When it shows the summary, there's no music data, until I click the music tab where the 19 GBs show up again. Help??

With the device connected, if you select the music tab and have "Sync Music" checked, you must manage music from that tab.
If you do not want to manage music that way, uncheck the "Sync Music" option then on the Summary tab you must check the "manage media manually" option.

I am having issues with converting some DVD to Video and getting it to load on iPad

I have used Format Factory to convert a DVD to Video - It will play on Computer, and load into iTunes but will not load on to iPad?

Click on the video in itunes and then click on the Advanced Menu option at the top, and click on "Create iPad or Apple Tv version".
This will create a file optimized to play on the iPad. Then just sync that version over.

I'm having issues with syncing my nao to my computer. How many ipods can one computer recognize?

My computer says that the ipod isnt being red correctly HELP!

The Reset Firefox feature can fix many issues by restoring Firefox to its factory default state while saving your essential information.
Note: ''This will cause you to lose any Extensions, Open websites, and some Preferences.''
To Reset Firefox do the following:
#Go to Firefox > Help > Troubleshooting Information.
#Click the "Reset Firefox" button.
#Firefox will close and reset. After Firefox is done, it will show a window with the information that is imported. Click Finish.
#Firefox will open with all factory defaults applied.
Further information can be found in the [[Reset Firefox – easily fix most problems]] article.
Did this fix your problems? Please report back to us!

Having issues with syncing my Treo 750. Justed started today????

I've had this Treo for sometime now and all of a sudden it won't sync. It would start its connecting, but then fail. I went through the trouble shooting; Exceptions added in Firewall.
What do I do now?!? Has anyone else run into this?
cschaller
Post relates to: Treo 750 (AT&T)

Yes, USB Cable. Only error I get is: "ActiveSync cannot connect to the Windows Mobile powered device. To troubleshoot the problem, click OK."
I follow the troubleshooting procedures and I get these results:
1. Sygate Personal Firewall has been detected. Firewall settings can prevent Windows Mobile powered devices from connecting. Get up-to-date solutions to common firewall problems and step by step instructions for correcting them. Please click the following link:
http://go.microsoft.com/fwlink/?LinkId=65175
and follow the steps provided to make sure that your firewall is configured correctly.
It walks me through to configure, but I can't find Sygate. I have a corp version of Symantec, but I was able to add exceptions that sould allow it to work correctly
2. Unable to establish a connection between the PC and the device. Get up-to-date solutions to common connection problems. Please click the following link:
http://go.microsoft.com/fwlink/?LinkId=65257
3. No additional known issues have been found.
If you are still experiencing problems please send the results to Microsoft to help improve future versions.

Having issues with syncing the ipod to the itunes

when i load the ipod after rebooting it will say songs on ipod "name" cannot be updated because all of the playlists selected for syncing no longer exists HELP! i just got the ipod nano and i dont want to have to return it. it was an earily christmas present n it also says that the files are being used under another program

Have a look at this user tip, it should sort out your missing playlist problem: Hudgie - iPod cannot sync because one or more playlists are missing

I am having issues with being able to send videos through text message after the update

I have the motorola droid 4 and after the recent update, I am no longer able to change my video settings on my phone. I need to be able to change the quality to low to be able to send as mms, however the option is no longer there? I have went through settings and nothing gives me the option to record a video and send it through text. error says that the video can not be attached because it is too large. can someone please assist me. The update was 4.1.2 version.

I have the Droid 4, and the 4.1.2 OS; when I open the camera and switch to video, then tap the gear for settings, I can choose HD+ (1080), all the way down to 320x240 resolution (5 different choices for resolution)
I can then go to that video in my gallery, and I have the share option there... how long is the video you are trying to send? What is the total size of the file? Perhaps the receiving party's phone cannot receive the video file?

I'm having issues with syncing songs I just purchased from iTunes. Please help me?

I just purchased a few new songs from the iTunes store on my macbook pro, but I can't sync them to my iPod touch because whenever I try to, a box comes up that says I need to authorize my computer, which I've done more than once and it doesn't seem to help. This is really starting to aggravate me. Does anybody know what I should do?

CS3 is too old to run on a new Macintosh laptop, sorry. You'll have to purchase CS6 or a Creative Cloud subscription.

Computer crashed, now having issues with syncing

Well our computer crashed. We had it fixed and I had to reinstall Itunes. I bought an app on Itunes through the computer and tried to sync it to my iPod. It told me that I have to erase everything on my iPod because you can only sync to one computer. Well I have a bunch of songs and other apps that I do not want to have to re-buy. How do I sync everything and get it all together? I am not trying to use more than one computer, my hard drive had to be completely replaced.

Welcome to the discussions,
Disable autosync in itunes, connect your ipod, right click on it in the device list and choose backup.
This will save data and settings to itunes. See what's included in this backup here: http://support.apple.com/kb/HT1766
Transfer your purchases the same way to copy all apps and bought media from the Store to your computer. Set up at least one contact and event on your computer to be able the merge your calendars and contacts after your ipod got wiped during the first sync.
The rest of the data can be restored from the backup you made.
Restoring: http://support.apple.com/kb/HT1414
How to download apps for free again: http://support.apple.com/kb/HT2519
Music and other media you did not buy in iTunes and pictures are not part of the backup. But there are other ways to copy such content, although not supported by Apple. See this thread: http://discussions.apple.com/thread.jspa?threadID=2013615&tstart=0

Having issues with getting the slide to advance properly after audio is done playing

Before I describe the problem I will describe what I'm trying to do.
I have a slide that plays a video. When the video is finished the user clicks a Continue button, and a short audio clip plays, and then the slide advances to the next screen. The problem comes when I'm trying to integrate closed captions. Since CC is only allowed at the slide lever I created an advanced action that is intended to display the audio text and play the audio. The caption with the audio text displays fine, but one of two things happens with the audio:
The slide advances before the audio is done playing.
I add a pause action to the advanced action and the slide does not advance at all.
Does anyone have any advice on how to control the slide so it will advance once the audio is done? Thanks in advance for your help.

The Pause action WILL pause the slide if invoked. And there is no way to set the duration of the Pause in the Advanced Action.
I would suggest you add a button to the slide that the user clicks to go to the next slide. Add the short audio clip that you want the learner to hear to the On Success caption of that button and set the button properties to Pause for Success/Failure captions. You can add the CC text for the short audio clip into the success caption so that it appears as the audio is playing. As soon as the audio clip finishes playing the success caption will disappear and the timeline will continue to the next slide.
No Advanced Actions required for this solution.

I was having issues with my 80G Video iPod and had to restore it, but now it seems all of my music on it previously is "corrupt" . How did all my songs get corrupted and how do I fix them?

I was having issues with syncing my 80G video iPod, so I restored it, and now all my songs in my library are "corrupted" and I can't get them back on my iPod. I keep getting error(-69). How did my songs all get corrupted, and how do I fix this without having to purchase these songs all over again?

Go to the iTunes Store, log into your account, and click the Purchases link under the Quick Links. From there you should be able to re-download some or all of your purchased content. Note that not all content has been licensed for re-downloading in all countries at this time; you can see what content you can download here:
http://support.apple.com/kb/HT5085
You can also re-download content using an iOS device.
For more information, see:
http://support.apple.com/kb/ht2519
This if course will not apply to songs you did not buy through the iTunes Store.
Regards.
Forum Tip: Since you're new here, you've probably not discovered the Search feature available on every Communities page, but next time, it might save you time (and everyone else from having to answer the same question multiple times) if you search a couple of ways for a topic, both in the relevant forums and in the Apple Knowledge Base, before you post a question.

Since downloading OS X Yosemite I have been having issues with Netflix. Video slows down which causes the audio to go out of sync. Netflix plays ok on ipad which makes me think it's the software which is the issue. Has anyone else had this issue?

Since downloading OS X Yosemite I have been having issues with Netflix. Video slows down which causes the audio to go out of sync. Netflix plays ok on ipad which makes me think it's the software which is the issue. Has anyone else had this issue?

Try this:
Go to System Preferences - Bluetooth. Delete the keyboard from the list of devices by pressing the "-" button. Take the batteries out of the keyboard and reinsert them. In Bluetooth Preferences press the '+" button to add the new device. If the keyboard begins to pair, click the word "pair" and type in the passcode. Press return. The keyboard is now paired.
If the mouse is not pairing, try this: shut down the computer completely, unplug any USB mice, then turn off the power to the bluetooth mouse. ONce the computer starts up again, wait for the pop-up looking for a mouse. Turn on the power to the bluetooth mouse. It should work normally now.

Having issues with syncing 23.98 HD video to 24fps audio

Similar Messages

Maybe you are looking for