Having iTunes volume only affect Mac speakers, not those connected with Airport Express

In iTunes Help, it says "To use only the volume controls on your remote speakers, see Adjust the sound quality." Great! At Adjust the sound quality, it says "You can customize the sound for...specific speakers." Also great! But...
How do I do that? There doesn't seem to be any instructions on how to actually accomplish this thing iTunes Help is claiming I can do, namely to be able to change the main iTunes volume (through any of several methods) and have that not affect the speakers I have hooked up through my Airport Express.
I'm well aware I can do this by switching to iTunes, clicking on the Zoom button if I've got iTunes minimized, clicking on the little "speaker" icon (though how that looks like a speaker I'm not sure), choosing "multiple speakers," and dragging the "Computer" slider. OR, if I can figure out how to make iTunes do what the help linked above claims I can, I can just use my Synergy hotkeys to change the volume with a tap on my keyboard.

I'm also suffering from skipping/sped up music, only when streaming certain internet radio stations to my Express (for example, friskyRadio in the electronica section). Mine's setup not to distribute IP addresses, if that's relevant.
Other than installing iTunes version 7 (now at 7.0.1) nothing has changed on my network, or on my computer.

Similar Messages

PowerBooks will not automatically connect to Airport Express

Recently purchased iPhone and changed my Airport Express password to something easier to spell on iPhone keyboard. Since then, two PowerBooks I own (early G4 and later G4) will not automatically connect to Airport Express Network. I have to manually go to Airport icon in menu bar and join network. Any advice on this small annoyance is greatly appreciated.

Went to the Sys Pref and edited the profile of the AE. Now loads fine.

Itunes will not stay connected to Airport Express with any Yosemite update.

Since installing Yosemite (original and updates) my itunes will no longer stay connected to Airport Express on my iMac. Any ideas?
I have no probblem at all when using ipad or other devices.
Matt

Hello mtvessell,
If you are having issues connecting to the iTunes Store, then start with the article below for some general troubleshooting to get it sorted out. If it continues, then take a look at the second article for additional support.
Can't connect to the iTunes Store
http://support.apple.com/en-us/TS1368
iTunes: Advanced iTunes Store troubleshooting
http://support.apple.com/en-us/TS3297
Regards,
-Norm G.

Can not stay connected to Airport express

I have an airport exress that is less then 9 months old. I have my internet provide wirlessely so my macbook pro picks up the signal and i share it with the airport exress. With the AE set to bridge mode. This was all working fine for the last 3 months, but now for some reason I can not stay connected with any of my devices wirelessly with the AE. I try to connect with my Iphone 4s and when i click on the network to connect i never recieve a check mark on the left all it does is give me the moving circle. I try to search the web on the phone and it will work for a second then not work for who know how long then work for a second ect.... i have hard rebooted the AE, reset network settings in my phone, reset smc and pram. when i access the ae through airport utility on my mac the internet shows green and the AE show amber becuase it says it does not have a valid ip address. I access the AE from my phone and the AE shows the same and the internet will go from green to amber and back. Also it will not stay connected to the AE i try to change setting on the AE through my phone and as long as i do it quickly it works fine, but if i wait anylonger then 10-30 seconds the phone drops the AE and i have to start over even though it will pick it up again with in a second or two. this is the same for ipad, three iphones, dell computer, and a android phone.

Simply reconfigure your Airport Express to either use for airtunes only or to extend the range of the existing network. This effectively connects the Airport Express to your main wireless router as a basic access node rather than a separate router creating its own network.
If you consult the User Guide that came with your Airport Express you'll find additional information on how to setup an Express to simply extend a local wireless network rather than function independently.
Why reward points?(Quoted from Discussions Terms of Use.)
The reward system helps to increase community participation. When a community member gives you (or another member) a reward for providing helpful advice or a solution to their question, your accumulated points will increase your status level within the community.
Members may reward you with 5 points if they deem that your reply is helpful and 10 points if you post a solution to their issue. Likewise, when you mark a reply as Helpful or Solved in your own created topic, you will be awarding the respondent with the same point values.

G5 & PC NOT STAYING CONNECTED VIA AIRPORT EXPRESS!

I've got a G5 and a PC - Hoped that Airport Express would allow both to access internet (via cable modem).
The connection drops after a little while. Everything says its working but obviously it's not.
ANY HELP??!!!
Thx!

reinis wrote:
I have white Macbook (802.11g capable) and Airport Express (802.11g capable).
I have a LAN internet connection, which is pretty fast. When I connect the cable to my ethernet and try to download something (for instance, speedtest.net) then the download speed is 33Mbit/sec, and upload is 20Mbit/sec.
I also have an Airport Express router - the 802.11g to be specific. So in the Airport Utility, under Wireless I selected "802.11g ONLY" and selected 24Mbit/sec Multicast rate.
When I tried to download something when conected to my Airport Express router - what actually happened, is that my computer is 2 m away from the Airport Express and the max download speed approximately should be ~24 Mbit/sec, but it turns out that the down speed is ONLY 14 Mbit/sec and the upload speed is 11 Mbit/sec.
So it means, that the Airport Express actually cannot deliver the 24 Mbit/speed.
I am actually pretty dissapointed, because I was kind of okay with the fact that I will loose those ~10 Mbit/sec from my actual internet sped when connected via Airport express, but I did not expect that it would be halved.
Any solutions?
According to one source, the maximum throughput of 802.11g is 25 Mbps. That assumes ideal conditions. To learn more about those conditions in your case, launch AirPort Utility, double-click on your AirPort station to enter "Manual Setup" mode, select the "Advanced" panel, click on the "Logs and Statistics" button, then click on the "Wireless Clients" tab. There you will see values for signal and noise. The closer those two numbers are together, the worse throughput you can expect.
If the value for noise is high, you might try setting your AirPort unit to a different channel.
All the above is based on your having no other Wi-Fi equipment.

Power Mac G4 and MacBook Connection to Airport Express

My problem is how to connect different Computers (Power Mac G4, Power Book G4 and Mac Book) to just one printer, which has no ethernet connectivity. So I thought it could be possible with airport express. And it is with PowerBook and MacBook, but what about the PowerMac G4? Is an Airport card compatible with Airport Express?
Does anyone out there know details?
iMac 2,16 GHz, 2GB, 500GB; PowerBook G4 12''; PowerMac G4 Mac OS X (10.4.8)

Hi
The airport card in the G4PM is compatible with the airport express. I.e. if you set up a USB printer on the express all the computers you list will all be able to work with it. Of course the data rate will be slower with the older card for the PM, (11 Mbps) but I can't see this being a problem.
Have a look at as this user has compiled a helpful list of compatible printers or more importantly incompatable ones.
http://www.felixgp.force9.co.uk/tech/1013.html

ITunes not playing/connecting through Airport Express

Whenever I try to play a track in iTunes wirelessly through my Airport express iTunes always returns the error: "An error occured while connecting to the remote speaker "AirPort Express" The network connection failed".
I can't work out what's wrong because the Airport light is green and connected to my router perfectly, there are no errors in the Airport utility and I can print wirelessly to the printer connected to the Airport using the Bonjour setup.
I have Windows 7 and the latest versions of all software and firmware installed. Turning off Windows firewall makes no difference so it can't be that. I have tried everything I can possibly think of and have gottem nowhere. Please help!

Darryl Rehr wrote:
I have configured and re-configured my Airport Express, but I can't get it to receive music from iTunes.
iTunes does recognize presence of Airport Express (named "Stereo Cabinet").
However, when I select "Stereo Cabinet" in the pulldown menu, all I get is reduced volume output through my computer speakers... not through the stereo system hooked up the to the Airport Express.
I've had this problem for months... posted here some time ago, but got no response.
I am running 10.6.2 on an Intel Core duo Macbook laptop. This function used to work just fine, and I can't figure out why it no longer does. I think I had the same trouble under 10.5... but my attempts to figure it out were only sporadic (busy life, you know?).
Can anyone help?
DR
sorry if i ask the obvious but have you enabled airtunes like so ?

Mac mini not keeping connection with Cisco wireless access point

I am trying to get my wife's Mac Mini to keep it's connection with the wireless network at her school. They are using a Cisco access point (not sure of the model) which works fine with my G4 Powerbook and the numerous Macbooks being used there, but for some reason her Mac Mini drops the connection after 4 or 5 minutes, at which point she needs to log right off for it to reconnect (as opposed to just turning the card off and on again). I have already gone through the deletion of the Networkinterfaces.plist file, and recreation of the Airport card profile process, but this only kept the interface active for about 36 hours, then it was back to the same old problem. At this point I am thinking "flakey card"...before I ship it off to Apple, can anyone offer any other possible solutions?

After spending time on the phone with a Apple support technician, he indicated that the Iphone has a compatibility problem with the wep key encryption that the Cisco appliance uses. I find this disturbing being that Cisco is the biggest in network gear. What's UP Apple? We need SP1 for the IPHONE!!!

Ipad connects with Airport Express, but not wireless router

I have a airport express that exends my network and is connected by an ethernet cable to the wireless router. they are on opposite sides of the house from each other. every other device i own has full bars wifi anywhere in the house. but the ipad only seems to find the signal from the AE.
If i go in the bedroom with the wireless router, the signal drops to 1 bar. if i unplug the AE along with all the other electronics for the TV/Receiver at night, the ipad loses the signal and cannot get a signal from the router, standing right next to it. i have tried reset, hard reset, renew lease forgetting network, and all fails. any ideas?
I have a Verizon Ultraline series 3 model A90-9100EM15-10 and the firmware is up to date.

Disclaimer - For me the Apple Support Communities are an international user to user technical support forum. As a man from Mexico my first language is Spanish. I do not speak English, however I do write in English with the aid of the Mac OS X spelling and grammar checks. I also live in a culture very different from that found in most 1st world nations, such as that in the two dominant North American countries. Written language has no tone. When offering advice in the ASC, my comments are not meant to be anything more than helpful and certainly not to be taken as insults.
You likely have your reason for extending your network in this manner, but it seems that the AE is not really extending your router's network, but creating its own separate network that then extends your internet connection. This can be confusing to devices if you are expecting that they will switch between the two of them automatically.
The iPad can only support one connect at a time. It sounds like you want it to be able to jump from the AE connection to a router connection on a whim when signal strength drops. I am not sure that the iPad's radio is that sophisticated. At best when the iPad looses a signal it could ask if you want to join any other network that it detects, especially if it has connected to that network in the past.
AFA the router, some routers don't like iOS devices and just won't connect. When you go to Settings/Wi-Fi does the iPad see the router's network? If the iPad sees the router network, try configuring a connection by hand.
Tap Other... and write the name of the router's network. Tap Security and select the type of security the router's network employs. Return to the previous pane and enter the password. Tap Join. If you can make the conection the iPad should remember this network in the future. Turn on Ask to Join Networks and hopefully when the iPad looses the AE signal in the future it will then ask you if you want to join the router's network.

Having trouble bridging wired connection with Airport Express

I've had an Airport Express Base Station for a little while, really only using it to wirelessly print and stream my music.
I'm at my college now, and there's a campus wide wired network. I've been trying to bridge this network so I can wirelessly connect to the internet with my laptop, Nintendo DS and eventually Nintendo Wii. The problem is that I can only get the orange blinking light on the AEBS, I don't have the software that came with it (though I have the Airport Admin and Setup stuff under Utilities), and the computer doesn't seem to recognize the base station at all.
I'm an idiot, I'm pretty certain, but is there something easy I am overlooking here? Will an AEBS not bridge a wired network unless it's cable or DSL? I'm unclear on exactly what kind of network my college uses.
thanks!

Most likely your college's network is providing NAT/DHCP services. I suggest that you set up your AirPort Express Base Station (AX) as a "wireless bridge."
To set up the AirPort Express Base Station (AX) as a bridge, using the AirPort Admin Utility, connect your computer directly (using an Ethernet cable) to the Ethernet port of the AX, and then, make these settings:
Network tab
- Distribute IP addresses (unchecked)
- Apply the new setting.
- Wait at least 5 minutes.

IPad and iPhone 4 and new 5s drop connection with airport express. This just started recently after working fine for a year. PC does not drop. Wifi signal fine. Help?

Streaming music with airport express and Apple TV to 2 different systems. No problem with Apple TV. iPad and iPhone 4 and new 5s keep dropping their connection to airport express. Airport express connection to wifi appears to be fine. No dropping by windows PC. This just started recently after working fine for a year. Help?

What does any of this have to do with the Apple TV?

Using remote speakers with Airport express & safari

How do I get music streams to work through my remote speakers, that are connected with airport express to my laptop? No problem through iTunes. I'm using Safari.

Hi Rcaanl, welcome to Apple discussions; )
See if this site helps you any iFelix I hope so.
Good Luck & please let us know how you fare.
Eme'~[)
Helpful.. Solved..... Awarding points

I find there is a slight delay between my macbook speakers and external speakers connected via Airport Express. Is there a way to rectify this? Thanks!

Music plays out of sync between my computer speakers and externally connected throught Airport Express speakers.

Unfortunately, I don't have either a Slingbox or iHome speakers so I won't be able to reproduce any of the issues you are having. With the fact that you live in large apartment complex would still lead me to believe that Wi-Fi interference may be the reason that you are having streaming issues.
I suggest you perform a simple site survey, using utilities like iStumbler, or AirRadar to determine potential areas of interference, and then, try to either eliminate or significantly reduce them where possible.

I have an Airport Express connected via optical toslink to a dac/amp in turn connected to speakers. When using iTunes I get message "no speakers connected to Airport Express" and audio sound has drop outs.

I have an Airport Express connected via optical toslink to a dac/amp in turn connected to speakers. When using iTunes I get message "no speakers connected to Airport Express" and audio sound has drop outs.

Ok, if you are connecting the AirPort Express Base Station (AX) to the existing wireless network, then the DSL in the next room is most likely a combination DSL modem and wireless router. Thanks for clarifying that for me.
Although they may only be separated by a single wall, the building material used in that wall may be enough to prevent the AX from receving a "good" signal from the DSL router.
Since I don't know what computing equipment you have available, please check out this AirPort User Tip: AirPort - Optimal Base Station Placement to see if you can get some SNR measurements at the location of your AX. To do this properly, you will want to power-off the AX and only get these measurements for the DSL router.

Mac OS X not working with Airport Express but Win XP is ok on the same iMac

Hello everyone,
as the message says I am having troubles with Airport Express.
To say it quickly, I live in a house share in London, and everyone in the house enjoys the wifi without troubles. I do as well with my macbook from every point of the house.
The troubles are with the big iMac: with mac os the internet signal won't just work at all, pages take minutes to load with both safari and firefox, and most of the times the loading times out.
I thought it was a signal power problem, but the weirdest thing of them all is that... when I switch to Windows XP on the same iMac (and right now I am writing from that!) the internet works perfectly!
Then I switch to mac os again... and slow internet again!
Anyone has an idea of what could this be?
Many thanks for the support

Yes, I just discovered this problem on my own machine.
I just wanted to check some settings and discovered that the behaviour of the GUI of Server Admin was somewhat "erratic": First this "no services are configured" message. Some of the configured servers were marked with the usual green "up and running" bullet, others dark grey - those were normally configured and running and clicking the appropriate line seemed to force Server Admin to check the actual state and then turned also green. But sometimes configuration pages were "greyed out", or while switching through the tabs Server Admin claimed that where were "unsaved changes" which should be saved (or discarded).
And then SMB: this was light grey, as usual when a service is not running and clicking on it I browsed through the configuration tabs - everything seemed ok (all my settings were correctly shown, configured as PDC with right domain name etc.) - and I started the service. Then suddenly the configuration settings changed to the default settings - no more PDC, but a "standalone server" with workgroup name "WORKGROUP"...
Looks for me, as if Server Admin lost it's "source" file for the configuration (the file in /var/db/smb.conf says, that it is automatically generated -- does somebody were the source file is stored?)...

Having iTunes volume only affect Mac speakers, not those connected with Airport Express

Similar Messages

Maybe you are looking for