Having lots or trouble connecting ribbon 1, what's it do?

I took the back of my daughter iP3 off, and now I
ve messed it up...At first it wouldn't charge..I fixed that, then the home button didn't work..I fixed that..THEN it would open but all of the colors were messed up..didn't fix that, and now it won't open or show anything on the screen Ideas??

Based on your excellent description of what you've done so far, I believe your only option consists of going into an Apple Store and buying an actually working new iPhone. The one you have "repaired" is toast.
Hope this helps

Similar Messages

I'm having lots of trouble finding semi-decent equipment at an affordable price. I would like to start a podcast with two hosts and I have a macbook pro that i purchased in april 2011. any suggestions?

I'm having lots of trouble finding semi-decent equipment at an affordable price. I would like to start a podcast with two hosts and I have a macbook pro that i purchased in april 2011. any suggestions?

I should keep it simple - if you start getting involved with mixers and multiple microphones you will find the cost escalating alarmingly. If you can get yourself a decent microphone and spend some time doing tests to find the best way of balancing the voices you should be able to get acceptable results. You can't plug an ordinary microphone directly into a Mac - you would need a mixer or a preamplifier - so it's probably worth looking at USB mics. I don't know what cost range is available, and you would have to check that they would work with your Mac. Otherwise you will need an ordinary moving-coil mic and probably a USB audio converter which can accept a microphone - look at the Roland site.

Does Apple read these posts? I'm having the same trouble connecting iphone4s to my 2012 Prius V. Apple said it was a Toyota problem. Apple needs to help us all!!!!!!!

Cannot connect new iPhone 4S to my Prius V bluetooth . Have been trying so many different fixes. Maybe if the almighty Apple read the posts, the problem could be fixed. Help!!!

From http://www.toyota.com/entune/what-is-entune/phones.html we read:
"Android™ and Blackberry® wirelessly connect your phone to the available Entune™-equipped Toyota using Bluetooth®. The iPhone® is connected via a USB data cable."
There's clearly something different about the iPhone's bluetooth capabilities than the other two phones. To say it's only Apple's or Toyota's problem isn't very helpful for anyone because, yes, Toyota should have designed Entune for full compatibility with iOS devices and, yes, Apple should have designed the iPhone to be at least as capable as the other phones wrt bluetooth.
I still don't know who to holler at.

Having to much trouble with arch. What other distros do you recomend?

I've been trying to geet arch running flawlessly on my thinkpad x61 for the last month.
But I've run in to some problems that I can't solve.
The iwlwifi-4965-ucode drivers unstable and gives me kernelpanics. Tried to roll them back but nothing happend.
I'm having problems with my xorg. It worked flawlessly under kubuntu but in arch I get some strange lines when things moving horizontaly on my screen. Like the image is splitting into 2 pieces instead of one. Have been configuring my xorg for weeks without any result.
Feels like I need some other distro.
I like the whole from scratch idea.

timetrap wrote:
I think you misunderstand what a linux distro is. There is no secret sauce that makes one distro better than the other. They all have the same ingredients. What make distros different is how they put the same ingredients together.
I am assuming you went here http://www.linux-on-laptops.com/lenovo.html and looked at this http://pi-ist-genau-3.de/?page_id=344
And I am assuming you looked at this too (regarding your wireless) http://bugs.archlinux.org/task/10984
tried the xorg.conf from "debian on lenovo x61" and its a dualscreen configuration. And I actually had a 1680x1050 samsung syncmaster standing in a closet so I plugged it in and tried to play movies @ both screens and I get the same result on both screens no matter what mediaplayer I run. So something must be wrong with my intel driver?
My xorg.conf before I tested the dualscreen xorg, witch gives me the same problem.
Using xf86-video-intel driver.
And about the wifidrivers. A bug is allways a bug no matter if it's known or not. Still a problem.
Last edited by bredin (2008-08-18 20:14:30)

Having lots of trouble debugging program

Hello,
Im writing a very simple pong program, when I found that I needed to make an array of booleans, for remembering which keys are held down. Heres the program...
import java.awt.*;
import java.applet.Applet.*;
import java.awt.event.*;
import java.lang.*;
public class Pong extends java.applet.Applet implements KeyListener,Runnable{
     double ballX;
     double ballY;
     double paddleLeft;
     double paddleRight;
     boolean[] keys=new boolean[5];
     Thread t=new Thread(this);
     public void init(){
          ballX=100;
          ballY=100;
          paddleLeft=150;
          paddleRight=150;
          for(int i=0;i<4;i++){
               keys=new boolean();
          keys[1]=false;
          keys[2]=false;
          keys[3]=false;
          keys[4]=false;
          addKeyListener(this);
          t.start();
     public void paint(Graphics g){
          g.fillRect(5,(int)paddleLeft,5,70);
          g.fillRect(490,(int)paddleRight,5,70);
          g.fillOval((int)ballX,(int)ballY,10,10);
          if (keys[1]){g.drawString("hi",50,50);}
     public void keyTyped(KeyEvent e){}
     public void keyPressed(KeyEvent e){
          int keyPressed=e.getKeyCode();
          if (keyPressed==38){keys[1]=true;}          //arrow up
          if (keyPressed==40){keys[2]=true;}          //arrow down
          if (keyPressed==87){keys[3]=true;}          //w (up)
          if (keyPressed==83){keys[4]=true;}          //s (down)
     public void keyReleased(KeyEvent e){
          int keyPressed=e.getKeyCode();
          if (keyPressed==38){keys[1]=false;}          //arrow up
          if (keyPressed==40){keys[2]=false;}          //arrow down
          if (keyPressed==87){keys[3]=false;}          //w (up)
          if (keyPressed==83){keys[4]=false;}          //s (down)
     public void run(){
          while(true){
               repaint();
               try {
                    Thread.sleep(100);
               catch (InterruptedException e){}
and the output from the compiler..
/tmp/29795/Pong.java:22: '[' expected
               keys[i]=new boolean();
^
/tmp/29795/Pong.java:22: illegal start of expression
               keys[i]=new boolean();
^
/tmp/29795/Pong.java:22: incompatible types
found : boolean[]
required: boolean
               keys[i]=new boolean();
^
3 errors
I cant seem to figure out what to do.. please help!
Thanks in advance..

boolean is a primitive, not a class, so it doesn't have a constructor. When you create you boolean array, every element is initialized to a boolean with a value of false.
If it were an array of objects (that is, references), then every element would be initialized to a reference with a value of null, and you'd need to create objects to assign to each of those references.

Having lots of trouble installing an OS (A75IA-E53)

I recently got hold of a MSI FM2-A75IA-E53 board, an AMD A8-6600k, some RAM and a new Hard Drive.
It shipped with BIOS 2.2 and I've updated it 2.3 (just because it was annoying me and I wanted to see if it fixed anything).
I've tried all manor of versions of OS - Ubuntu 14.04 x86/x64 Desktop and Server, Debian 7, Windows 10 TP, Windows 7, Windows 8.1.
All of them fail for all sorts of different reasons, IRQL, Faults_In_NON_PAGED_AREA, frequent fails at "Setting up devices" during first boot of Windows. Linux boxes very rarely go past installing the base system, Debian did... but then was constantly moaning about soft crashes and after about 4~ hours would just become totally unresponsive.
I've tried different HDDs and I've tried a different stick of RAM, but always get the same thing and I'm beginning to re-evaluate my enjoyment of computering.
Any ideas? I'm thinking presumably board fault? but to date my experience of boards is that they exist in two states, working perfectly fine, or totally dead.

Hi,
Please tell us a bit more about your system: see >>Posting Guide<<
Also what way did you install all the OS (USB, Disk)? And what way did you update the BIOS? Was it successful(does it say it runs 2.3) ?
Also did you try to >>Clear CMOS<< ?

ASA having lots of trouble

Hello,
I'm kind of new in a company where an ASA is starting to have soo many problems since monday. Everything from telephony to RDP is working incorrectly so it's either pretty slow or not working at all.
I have been monitoring and searching for solutions but this has led me into thinking it is a bug in the code. So here it is...
- ASA 5540 Code is 8.2(5)41 Interim Release. This is the first thing that led me to think is a bug.
- Many underruns and overruns in the interfaces despite CPU usage is in the 15% to 20% mark.
- Constant CPU hogs of random processes (PIX garbage collector, snmp, ssh_init, Unicorn) that make me believe the reason of the under and overruns.
- Resources have been used at about 25 to 35 percent of the total (110K of 400K conns aprox).
- Interfaces are at about 95K Kbps
What I think....
1. Bug (It's not easy to propose an upgrade since the only way is going to 8.4 and nat changes,etc)
2. Host with some ind of virus (CPU would go UP)
3....... that's it
Any suggestions???

Hi,
Please tell us a bit more about your system: see >>Posting Guide<<
Also what way did you install all the OS (USB, Disk)? And what way did you update the BIOS? Was it successful(does it say it runs 2.3) ?
Also did you try to >>Clear CMOS<< ?

Having lots of trouble signing on. I have 3.6, didn't start til downloaded 4.0 s0 deleted 4.0 still trouble, when it finally pops up, it's about 18 times

I click and click and click, till finally it pops up about 18 to 25 times.

Hi-
Looking through your log, I noticed the system is having problems with some M-Audio drivers.
6/27/09 10:11:47 AM com.apple.SystemStarter28 extension /Library/Application Support/M-Audio/Kexts/10.2/MAudioRevolution51Jaguar.kext does not contain code for this architecture
6/27/09 10:11:47 AM com.apple.SystemStarter28 2009-06-27 10:11:47.745 DeviceHelper143:10b Error (1) occurred while trying to load /Library/Application Support/M-Audio/Kexts/10.2/MAudioRevolution51Jaguar.kext. Load failed.
6/27/09 10:12:03 AM com.apple.SystemStarter28 2009-06-27 10:12:03.300 DeviceHelper143:10b * Assertion failure in +MADevice devices, ../CrossProduct/Revo/Presets/MADevice.m:121
6/27/09 10:12:03 AM com.apple.SystemStarter28 2009-06-27 10:12:03.302 DeviceHelper143:10b No devices found.
6/27/09 10:12:03 AM DeviceHelper143 * Assertion failure in +MADevice devices, ../CrossProduct/Revo/Presets/MADevice.m:121
6/27/09 10:12:03 AM DeviceHelper143 No devices found.
6/27/09 10:12:03 AM com.apple.launchd[1] (com.apple.UserEventAgent-LoginWindow91) Exited: Terminated
Old drivers, outdated drivers and incompatible drivers can cause sleep problems.
If you are not using any M-audio devices, I would remove the files.
If you are, you should check for updates, and still should remove the offending files.
If you migrated your user files from a previous system, say from a PPC system, these can cause problems.
Start by running in safe mode, and see if the machine sleeps and wakes as it should.
Troubleshoot your Startup and Login items as described in this article:
http://www.thexlab.com/faqs/startupitems.html

Having LOTS of trouble installing CS2

I am trying to install Photoshop CS2 on a new computer running Windows 7. I know it should work because I've installed it successfully on Windows 7 before. I was told that the registered versions no longer work and that I needed to download the free version. I downloaded all the files. When I ran the first one it asked for my serial number. I put it in. It said it was invalid. I checked and rechecked. I made sure it matched the one on my Adobe account. It still says it's the wrong serial number.
Why do I need a serial number anyway if this is free software.
Anyway, I need HELP. I've been trying to get this to work for almost two days. I've had three chat sessions which were very time consuming. The last person said that CS2 is only suppported now via this forum.
Help!!

csuebele wrote:
I believe you hard drive needs to be less than 1 TB to be able to load CS2.
Goodness, I didn't know that.
I must have posted this link at least a dozen times, but have never read it thoroughly
http://helpx.adobe.com/x-productkb/policy-pricing/creative-suite-2-activation-end-life.htm l
Just read it all and didn't see max HDD size mentioned, but there's a reference to PS7 and >1Tb HDDs in this old thread
http://forums.adobe.com/message/5739459

Having lots of trouble creating a multicam clip with independently recorded audio in sync

I can't figure out why this isn't working and have tried it many different ways and many times. Here's the situation:
Video was shot on a Canon 5D Mark III and a Canon 7D (I suspect this may be part of the problem because the 5D has timecode capabilities and the 7D doesn't)
Primary audio was recorded on a Zoom H4N but each camera recorded audio also and the levels are all fine
I've tried the following to create the mutlicam clip of the interview with all audio and video in sync:
Naming the Camera Angle for each clip (Profile and Straight On)
Selecting all of the relevant video clips
Seleting all of the relevant audio and video clips
Synchronizing the video clips with the high quality audio clips (half of which I had to do by hand) and then selecting the sychronized clips to create the multicam clip
None of this works. In the end a multicam clip is created that is completely out of sync. I'm at a loss and would love any help!
Thank you.
Nick

I saw in a video tutorial (after trying to find solutions to this problem) that one should assign the independent audio to the same camera angle as one of the cameras. After assigning it to its own angle, it did much better but it loses sync about half way through now. Screenshot attached.
Nick

I am having lots of troubles with the new Adobe Reader X.

When I try to download it I get an error mes
sage #1402 UNKNOWN\fdf\AcroE
xch.FDFDoc\ShellNew.
When I try to cancel the error message I get
Fatal Error During Installation. Is there anyone
out there that could help me.
Adobe support has not been much help.
Thanks

What OS you are working on? From where are you trying to download and using which browser?
Can you try below link to download Reader X
http://get.adobe.com/reader/enterprise/

Is it possible to reverse the iOS7 upgrade. I'm having lots of trouble on my iPAD 2, especially in audiobus

The communication between apps in audiobus is out. I'm also experiencing quite often (several times a day) that FB is calling out. I would love to get the former OS back.

Sorry but Apple does not support downgrading the iOS.
Other users have had success correcting some issues with their iPad after updating to iOS by resetting all settings and then resetting the iPad.
To reset all settings use the Settings app.
Settings > General > Reset > Reset All Settings
Then reset the iPad like this: Press and hold the Home and Sleep buttons simultaneously until the Apple logo appears. Let go of the buttons and let the device restart. See if that fixes your problem.

New iPad having trouble connecting to Internet via Wifi.

I have had all 3 iPads and I got the new one on Friday, however starting today I have had a lot of trouble connecting to the Internet via Wifi. I could not connect at home nor at school where I have had no problems before with my previous iPads, and all my friends are having not having any problems connecting to the Internet with their iPad 2's. Is there something wrong with the new iPads?
I have a 3rd generations iPad 16GB Wifi only.

Kdpe222-
Then you may have a defective iPad If you can show it to an Apple Store Genius, you may get a replacement if the Genius can not fix it.
If there is no Apple Store near you, look for an Apple Authorized Repair Center. There may be one in your city. <Apple Authorized Repair Centers>
To continue on your own, take a look at <Troubleshooting WiFi Networks and Connections>.
Fred

ITunes7 Lots of trouble with synchronizing! Does anyone know what to do?

I'm having lots of trouble since I installed iTunes7. It takes hours to synchronize my Ipod (40 Gb). The first synchronizing, iTunes7 reinstalled the whole library (7000 songs). After 5 hours, the synchronizing was completed. After playing a few songs on my iPod, I tried out a second synchronizing. iTunes7 synchrionized again all 7000 songs, which would never have happened with iTunes6.0.5. With iTunes6.0.5 it would take a few minutes! By the way, some old bugs are still in iTunes7. For example, sometimes songs bought from iShop are not synchronized to my iPod. iTunes gives a stupid message that the software on my iPod is an old version, which is not true! Yes, my iPod migth be old (3 yrs), but if Apple continious like that, the next mp3-player won't be from Apple

The issue resolved itself. After synchronizing a few times, things got back to normal!

I'm using the latest photoshop cc 2014 with most updated camera raw... i am having A LOT/REPEATED trouble getting files to "synch" with corrections, no matter what i options i select (i.e. "everything")... WTH is wrong with me/my computer/adobe?! help. fa

I'm using the latest photoshop cc 2014 with most updated camera raw... i am having A LOT/REPEATED trouble getting files to "synch" with corrections, no matter what i options i select (i.e. "everything")... WTH is wrong with me/my computer/adobe?! help. fast. please

BOILERPLATE TEXT:
Note that this is boilerplate text.
If you give complete and detailed information about your setup and the issue at hand,
such as your platform (Mac or Win),
exact versions of your OS, of Photoshop (not just "CS6", but something like CS6v.13.0.6) and of Bridge,
your settings in Photoshop > Preference > Performance
the type of file you were working on,
machine specs, such as total installed RAM, scratch file HDs, total available HD space, video card specs, including total VRAM installed,
what troubleshooting steps you have taken so far,
what error message(s) you receive,
if having issues opening raw files also the exact camera make and model that generated them,
if you're having printing issues, indicate the exact make and model of your printer, paper size, image dimensions in pixels (so many pixels wide by so many pixels high). if going through a RIP, specify that too.
etc.,
someone may be able to help you (not necessarily this poster, who is not a Windows user).
a screen shot of your settings or of the image could be very helpful too.
Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
http://forums.adobe.com/thread/419981?tstart=0
Thanks!

Having lots or trouble connecting ribbon 1, what's it do?

Similar Messages

Maybe you are looking for