Having more than 1 ipod to a computer

Me and my boyfriend are thinking about buying ipods. I am wondering if we will both be able to have our own music on our own ipods. I also would like to know if I buy an ipod from a private seller who is leaving all the music on the ipod will I be able to add that to my playlist to my computer?

Just to add, copying music off another person's iPod into your own library would be considered illegal sharing of music files and shouldn't be discussed on these boards.
But to answer your first question, yes you can use many different iPods on the same iTunes library. Or you and your boyfriend could each create their own use accounts and keep separate libraries and each sync your own iPod to your own library. Either method works.
Cheers,
Patrick

Similar Messages

Accessibilty tproblem with document having more than 50 pages

If a tagged document has more than 50 pages, accessibility does not work.
You need to change the settings in the wizard - set more than 50 pages.
Question: I have a document for the customer. Is it possible this option to save the document? Do I need to change it on any computer with Acrobat? What about the documents having more than 50 pages?

in the setting of any spool I selected 10000 pages as the last page... I dont have spool to check and see if it really displays all 10000 pages.
sp01> getin into some spool > hit settings buttons on the top.

HT1212 How do I perform step 5 in the Recovery Mode when an iPad minnie has been disabled for having more than the allowable entry attemps?

How do I perform step 5 in the Recovery Mode when an iPad minnie has been disabled for having more than the allowable entry attemps ?

FORCE IPAD INTO RECOVERY MODE
1. Turn off iPad
2. Turn on computer and launch iTunes (make sure you have the latest version of iTune)
3. Plug USB cable into computer's USB port
4. Hold Home button down and plug the other end of cable into docking port.
DO NOT RELEASE BUTTON until you see picture of iTunes and plug
5. Release Home button.
ON COMPUTER
6. iTunes has detected iPad in recovery mode. You must restore this iPad before it can be used with iTunes.
7. Select "Restore iPad"...
Note:
1. Data will be lost if you do not have backup
2. You must follow step 1 to step 4 VERY CLOSELY.
3. Repeat the process if necessary.

Export a BO report to excel having more than 65500 rows

Post Author: noble
CA Forum: .NET
Please let me know what are the different options available to export BO report having more than 65500 rows to excel 2003.

Post Author: amr_foci
CA Forum: .NET
i think excel will not be able to handle all that records , you can devide your report into some tabs based on a specific condition for every tab, so when you export it to excel you will get many tabs as was exist in the the Business Objects report
good luck

Logical table having more than one Logical table sources

Hi ,
Is it possible a logical table has 2 logical table sources and there is no join between the underlying table of logical table sources?
What will happen if we create the request which contains one attribute from each source?
Will BI server return records with Cartesian join?
Is it mandatory if logical table is having more than one logical table sources(exp. Logical table sources are X,Y and underlying table is A,B respectively),
The underlying tables (A&B) must be joined ?
Can someone explain the logic behind the logical table sources? How does it work?
Any reference of document will be appreciable.
Thanks,Ashish

Hi Stijn,
Thanks for response.
You are saying that Oracle BI server will run a query against both tables and combine the results. But if there is no possibilty of any type of join, how BI server will combine the results from both tables.
I have a scenario like below -
Suppose i have 2 tables A and B at physical layer. Both table contains the information of any common subject area.
But there is no attribute is common between A and B so not any kind of join possible between two.
Now if i create a logical table with 2 logical table source A and B and create any request having one column from A and one from B ,
What will happen? How BI server will combine the result? Will BI server not result records after Cartesian join.
How can i model this scenario?

Syntax issue when having more than 20 warnings

Hello,
when having more than 20 warnings in a compilation unit (package, procedure ...),
SQL Developer ( version 1.5.0.53)
doesn't always flag an error (like, for example, a misspelled local variable),
so instead of a compile-time error a runtime error is generated.
I tried to reproduce the situation and here is a simplified case where i've
encountered the same error.
Best regards
Alexander Andris, Prague
[email protected]
CREATE OR REPLACE
PROCEDURE PROC AS
l_arg1 pls_integer;
l_arg2 pls_integer;
-- declarations which issue PLW-07204 warnings ...( 20 or more ...)
cursor c1 is
select sysdate from dual
where trunc (sysdate) = trunc(sysdate);
cursor c2 is
select sysdate from dual
where trunc (sysdate) = trunc(sysdate);
cursor c3 is
select sysdate from dual
where trunc (sysdate) = trunc(sysdate);
cursor c4 is
select sysdate from dual
where trunc (sysdate) = trunc(sysdate);
cursor c5 is
select sysdate from dual
where trunc (sysdate) = trunc(sysdate);
cursor c6 is
select sysdate from dual
where trunc (sysdate) = trunc(sysdate);
procedure proc1 is
begin
null;
end;
BEGIN
l_arg_notdef := 42;
-- next line would not be displayed.
dbms_output.put_line (
'Error in SQLDev 1.5.0 - error on the assignment line not flagged '
|| ' by the compiler when preceded by > 20 warnings ...' ||
' (Error not shown in navigator.Same behavior also in SQLDev 1.21 ...).');
-- So, when lines 5 - 23 are commented out then line 31 is flagged as an
-- error (PLS-00201), otherwise not (runtime error only).
-- When working on a large package with more than 20 warnings and a lot of
-- code, to find an error like a misspelled local variable one would need to
-- a different IDE.Hope it is not difficult to fix this quickly ...
-- Details:
-- client platform: Windows XP
-- SQLDev: Version 1.5.0.53 Build MAIN-53.38
-- db.: Oracle 10.2 on Windows
END PROC;

Unfortunately, that's the intended behaviour.
After complaining about errors not being reported in previous versions, they did add the "Only first 20 issues are reported" warning, but unless you know that can happen, almost nobody will notice.
I keep advocating for reporting errors on top, next any warnings, until having used up the 20 spaces. If necessary, they could compile first with warnings turned off, then again with warnings turned on.
I don't think I ever put a request for this on the SQL Developer Exchange, so take a look there if you're up for it.
Also mind you can turn the warnings off yourself inside the preferences, so they won't bother (nor help) you again.
Regards,
K.

In which IT To Date is not allowed & not having more than one record

Hi all,
Could you please tell me "In which IT To Date is not allowed & not having more than one record ?"
Thanks in advance
Regards,
Asiya

Hi,
Just go through IT0003 and see if it fulfills the requirements or not.
Param

Hi anyone please help .. i am facing issue with acrobat 11 pro version, in acrobat 7 we are able to compare 2 pdfs which are having more than 1000 pages but in acrobat 111 pro it not possible , if try do so acrobat will unresponsive.. please let me know

please let me know how can resolve this issue... how can i compare 2 pdfs which are having more than 1000 pages.
Acrobat

please let me know how can resolve this issue... how can i compare 2 pdfs which are having more than 1000 pages.
Acrobat

Trouble with the SQL smt to :list tables having more than 1000 rows

Please I trying to list only tables having more than 1000 rows, but the sql stmt below doesn't work, can someone gives me a tips
select table_name from user_tables where table_name in ( select table_name from user_tables where rownum > 1000 ) : The result is no rows!
But I know that I have at lest 50 tables having more than 1000 rows
Thanks a lot for the help

If your tables are reasonably analyzed, then you can simply query:
SELECT table_name,
num_rows
FROM user_tables
WHERE num_rows >= 1000This will give you quite a reasonable estimate.
Otherwise you have to go for dynamic sql or use the data dictionary to help you generate suitable scripts ....

Unexpected Error - Web ADI having more than 800 lines in an invoice.

Hi All,
I am trying to upload an invoice having more than 800 lines through a custom build "AP Invoices WebADI". I am getting "Unexpected Error"; where Error message may be different in each unsuccessful run.
I have tried decreasing the lines step by step; by decreasing 25-50 lines per run. I was able to load an invoice with 450 lines but couldn’t load invoice with 500 lines.
What can be the reason ? Is there any limitation in open interface to load particular number of lines per invoice OR some sort of Web ADI limitation ?
Please advise.
Regards,
MH

Hi Yoonas,
Thanks for your reply.
I have checked the log file and found the issue:
BneBaseSQL.executeQuery:Stack trace: java.sql.SQLException: ORA-01000: maximum open cursors exceeded
I can understand its due to limit of open cursors. Before making change to db parameter I am troubleshooting code if I can find something to close the cursors properly.
One thing I have noticed is that this message is coming, every time (after 450 records), when Web ADI calls Java LOVs to validate the given values. All other code is fine.
I have 8 java based LOVs (java components attached in Web ADI). As per my understanding, during validation of each record, it calls the SQL Code for 8 LOVs hence open 8 cursors for each record. After 450 records, limit of maximum open cursors exceeds hence causing the issue.
What do you think, Is it true in this case? If yes, is there any solution to it ? The thing I am worried about is; how I can control the call of Web ADI to Java LOVs ??
Thanks & Best Regards,
MH

Is it possible to display spool having more than 50 pages?

Hi All,
Is it possible to display spool having more than 50 pages?
Standard SAP transactions like SP01/SP02/SM37allows till 50 pages if i am not wrong!
Thanks,
Vinod.

in the setting of any spool I selected 10000 pages as the last page... I dont have spool to check and see if it really displays all 10000 pages.
sp01> getin into some spool > hit settings buttons on the top.

Can i create IN/UP/DE Trigger on a existing table having more than 2L rows

Hi All,
Can i create a INSERT/UPDATE/DELETE Trigger on a existing table having more than 2 lacs records ? if yes (is that works for only some kind of triggers? or for all ?). if not, tell me the reasons and limitations with guidelines.
Thanks in Advance.

Hi,
Sure; you can create new triggers for tables that already have rows. The type of trigger and the number of rows already in the table don't matter.
Try it. If the trigger works with a small table in your Development database, then there's no reason to expect it won't work on a larger table in your Production datbase.

Startup issue when having more than one database on machine

Startup issue when having more than one database on machine:
I’ve installed two databases.
When I shutdown one of the database and try to start it up using
Startup pfile=’…location..’;
I get ora-12514: TNS: listener does not currently know of service rquirest in connect descriptor
when I try it again after 3 seconds, I get a new error, ora-01041: internal error. Hostdef extension doesn’t exist
Shutdown and Startup gave no problems when I had one database. Why am I getting problems when I have two databases?
I’m using: show parameter pfile|spfile; to make sure I have the right parameter locations, so the error shouldn’t be from location.
I’ve never installed two databases on one machine, so maybe I’m making a first-timer’s error.
Anyone know how to get this working, i.e. starting and stopping DB without issues?
Using oracle 11gR2 on Windows 7 64bit, all is working normal.
Thanks,
Ayman
Edited by: aymanzone on Jun 15, 2011 9:27 AM

aymanzone wrote:
my oracle_sid is set to the name of one of my databases
echo %oracle_sid%
shows me the name of my first database.
Still not working though.
When I start the services of both databases using Services, I can connect and run queries from both of the database.
Edited by: aymanzone on Jun 15, 2011 11:47 AMFirstly ... the Oracle Service for the instance should be started for the DB you are trying to connect or start.
Next ... from the command prompt:
set oracle_sid=<Instance_Name>
sqlplus sys as sysdba
startup pfile='location of the respective db pfile'
Now, if you want to start or connect to another DB which is on the same server (again assuming the Service is STARTED) ...
From the same command prompt session or other ....
set oracle_sid=<Other_Instance_Name>
sqlplus sys as sysdba
startup pfile='location of the respective db pfile'
Edited by: Srikanth on Jun 16, 2011 12:27 AM

Title above ALV grid is having more than 70 chars.

Hi friends ,
I have a requirement in which title above ALV grid is having more than 70 chars.
But the layout structure of ALV (slis_layout_alv) is having a component called wiindow_title which is having maximum length of 70 chars. How to show the text having more than 70 chars over here ?

Hello Abhijit,
Its not possible to display more than 70 characters in ALV Title. May be you can try using Top of page and ALV list commentary write.
Regards,
Karthik D

Having more than one ipod on one computer

Is there any way to have more than one ipod on one computer? If so how do you make it work without having to have the same songs on the same ipod? Doyou make separate playlists or what? I am clueless as to what to do and I need someone to tell me how to do it without confusing me!!!
Thanks!

If you are adding a second iPod for your own use, just connect the new iPod to your computer and follow the on screen instructions. It will update from your existing library. Depending on the size of your library and the type of iPod you choose you can have it update all songs and playlists, selected playlists only or you can manage it manually. The links in the section below explain the various methods.
If the iPod belong to two people the there are basically two ways of using multiple iPods on a computer and these involve:
a) Sharing a single iTunes library and user account.
b) Creating multiple user accounts and having separate libraries.
Sharing a Library
If you want to share the one library, you can set either or all of the iPods so that they only get updated with only certain playlists (you can update from more than one if you wish):
Loading songs onto iPod automatically - Windows
Choosing the update option "Sync Music - Selected playlists" allows you to create a playlist specifically for the iPod and drag the tracks you want into it. If you tire of the list and want to change it, you just add or remove the songs you don't want. The ones you take out out remain in the library to be used some other time if you choose. You can read more about playlists at these links:
iTunes: Creating playlists of your favorite songs
How to create a Smart Playlist with iTunes
Or you can choose to update any or all of the iPods manually and just drag whatever content you want to them: Managing content manually on iPod
Loading the iPod shuffle differs slightly but it can still be used with the others, for details have a look at this page:
Loading songs onto iPod shuffle - Windows
Separate User Accounts
Another option is to create a separate User account for each person on your PC or Mac. Different accounts by definition would give you completely separate libraries. Each account has it's own iTunes folder, Library and iTunes Music folder and you load it with CDs etc just as you did with your original one. The iPod can be set to update however the owner chooses, sync all, manual or sync specific playlists

What's the point of having more than one computer "Authorized"?

Why must it delete all my data just because i want to sync one song from either of my computers. this is stupid and i cannot stand Apple. why can't i sync between both of my computers? <Edited by Moderator>

Sorry, but I have no clear idea what your problem is or what it is you are trying to accomplish. I know you're frustrated and update; if you calm down and post your situation and goals clearly and calmly, I'm sure someone here can help you sort things out.
If you're referring to synching to an iPod (my crystal ball is in the shop so I'm guessing) and are trying to put content onto the iPod from more than one computer, you have to set it to manual management.
Managing content manually on iPod

Having more than 1 ipod to a computer

Similar Messages

Maybe you are looking for