Having more than one mail box, how do I define which will be the one to send e-mails?

I have 5 mail boxes and always when I send an e-mail, it sends automatically from one that I don't use much. How do I change for my preferred e-mail?

Mail preferences under Compose tab. Set which account to send mail from, or set it to use the highlighted account.
You might also verify in Mail preferences under Accounts, that each account has it's own SMTP server. Be sure the correct one shows for each account. I would also check the box to use only that server for that account, which will insure that the correct server and only that server will be used for the account. Otherwise if the SMTP server for the sending account fails, it will just switch to another account's server.

Similar Messages

When I air print from my iPad, I can't limit the number of pages. It just says print and the number of copies and I end up with way more than I want. How do I set it to limit the pages?

When I air print using FingerPrint from my ipad, it doesn't let me limit the number of pages, and I end up with more pages than I want. It asks if I want multiple copies, but it doesn't ask me number of pages, or which pages. Is there a way to do this?

When you use an AirPrint compatible printer, you get this option for page range. You are using your computer as the server in order to print, so you probably have to set the range on the computer. While you can print from your printer with this app, I assume that it doesn't give you the same control that you get directly from the iPad when using an AirPrint printer.
Read this from the FingerPrint support site. Selecting the page range would be part of the formatting of a print job.
http://fingerprint-support.collobos.com/knowledgebase/articles/66972-i-can-t-for mat-the-print-job

HT4946 I need to print & back-up a series of abusive/threatening SMS (on iphone 5c) for my solicitor. Is there a way to do this which will show the time, date & sender info? How can I preserve (full) SMS data as evidence for future court proceedings?

Does anyone know how to access sms text messages from iphone 5c backup from icloud or itunes? Apparently SMS can be restored so data I need must be stored in backup. I need to print a series of abusive/threatening SMS messages received on my iphone 5c from one sender. I need the time, date & whatever data is stored about source/sender of messages, as well as content. How can I access this data to create a chronological record of the abusive SMS messages and can I preserve the iphone's message log specifically-- so I can access records of these texts without having to restore a back-up? I need to do this to provide evidence for my solicitor and preserve that evidence for future court proceedings, thank you.

http://www.wideanglesoftware.com/touchcopy/index.php?gclid=CMr1..
http://www.ecamm.com/mac/phoneview/

Logical table having more than one Logical table sources

Hi ,
Is it possible a logical table has 2 logical table sources and there is no join between the underlying table of logical table sources?
What will happen if we create the request which contains one attribute from each source?
Will BI server return records with Cartesian join?
Is it mandatory if logical table is having more than one logical table sources(exp. Logical table sources are X,Y and underlying table is A,B respectively),
The underlying tables (A&B) must be joined ?
Can someone explain the logic behind the logical table sources? How does it work?
Any reference of document will be appreciable.
Thanks,Ashish

Hi Stijn,
Thanks for response.
You are saying that Oracle BI server will run a query against both tables and combine the results. But if there is no possibilty of any type of join, how BI server will combine the results from both tables.
I have a scenario like below -
Suppose i have 2 tables A and B at physical layer. Both table contains the information of any common subject area.
But there is no attribute is common between A and B so not any kind of join possible between two.
Now if i create a logical table with 2 logical table source A and B and create any request having one column from A and one from B ,
What will happen? How BI server will combine the result? Will BI server not result records after Cartesian join.
How can i model this scenario?

Startup issue when having more than one database on machine

Startup issue when having more than one database on machine:
I’ve installed two databases.
When I shutdown one of the database and try to start it up using
Startup pfile=’…location..’;
I get ora-12514: TNS: listener does not currently know of service rquirest in connect descriptor
when I try it again after 3 seconds, I get a new error, ora-01041: internal error. Hostdef extension doesn’t exist
Shutdown and Startup gave no problems when I had one database. Why am I getting problems when I have two databases?
I’m using: show parameter pfile|spfile; to make sure I have the right parameter locations, so the error shouldn’t be from location.
I’ve never installed two databases on one machine, so maybe I’m making a first-timer’s error.
Anyone know how to get this working, i.e. starting and stopping DB without issues?
Using oracle 11gR2 on Windows 7 64bit, all is working normal.
Thanks,
Ayman
Edited by: aymanzone on Jun 15, 2011 9:27 AM

aymanzone wrote:
my oracle_sid is set to the name of one of my databases
echo %oracle_sid%
shows me the name of my first database.
Still not working though.
When I start the services of both databases using Services, I can connect and run queries from both of the database.
Edited by: aymanzone on Jun 15, 2011 11:47 AMFirstly ... the Oracle Service for the instance should be started for the DB you are trying to connect or start.
Next ... from the command prompt:
set oracle_sid=<Instance_Name>
sqlplus sys as sysdba
startup pfile='location of the respective db pfile'
Now, if you want to start or connect to another DB which is on the same server (again assuming the Service is STARTED) ...
From the same command prompt session or other ....
set oracle_sid=<Other_Instance_Name>
sqlplus sys as sysdba
startup pfile='location of the respective db pfile'
Edited by: Srikanth on Jun 16, 2011 12:27 AM

In which IT To Date is not allowed & not having more than one record

Hi all,
Could you please tell me "In which IT To Date is not allowed & not having more than one record ?"
Thanks in advance
Regards,
Asiya

Hi,
Just go through IT0003 and see if it fulfills the requirements or not.
Param

HT1212 How do I perform step 5 in the Recovery Mode when an iPad minnie has been disabled for having more than the allowable entry attemps?

How do I perform step 5 in the Recovery Mode when an iPad minnie has been disabled for having more than the allowable entry attemps ?

FORCE IPAD INTO RECOVERY MODE
1. Turn off iPad
2. Turn on computer and launch iTunes (make sure you have the latest version of iTune)
3. Plug USB cable into computer's USB port
4. Hold Home button down and plug the other end of cable into docking port.
DO NOT RELEASE BUTTON until you see picture of iTunes and plug
5. Release Home button.
ON COMPUTER
6. iTunes has detected iPad in recovery mode. You must restore this iPad before it can be used with iTunes.
7. Select "Restore iPad"...
Note:
1. Data will be lost if you do not have backup
2. You must follow step 1 to step 4 VERY CLOSELY.
3. Repeat the process if necessary.

Unexpected Error - Web ADI having more than 800 lines in an invoice.

Hi All,
I am trying to upload an invoice having more than 800 lines through a custom build "AP Invoices WebADI". I am getting "Unexpected Error"; where Error message may be different in each unsuccessful run.
I have tried decreasing the lines step by step; by decreasing 25-50 lines per run. I was able to load an invoice with 450 lines but couldn’t load invoice with 500 lines.
What can be the reason ? Is there any limitation in open interface to load particular number of lines per invoice OR some sort of Web ADI limitation ?
Please advise.
Regards,
MH

Hi Yoonas,
Thanks for your reply.
I have checked the log file and found the issue:
BneBaseSQL.executeQuery:Stack trace: java.sql.SQLException: ORA-01000: maximum open cursors exceeded
I can understand its due to limit of open cursors. Before making change to db parameter I am troubleshooting code if I can find something to close the cursors properly.
One thing I have noticed is that this message is coming, every time (after 450 records), when Web ADI calls Java LOVs to validate the given values. All other code is fine.
I have 8 java based LOVs (java components attached in Web ADI). As per my understanding, during validation of each record, it calls the SQL Code for 8 LOVs hence open 8 cursors for each record. After 450 records, limit of maximum open cursors exceeds hence causing the issue.
What do you think, Is it true in this case? If yes, is there any solution to it ? The thing I am worried about is; how I can control the call of Web ADI to Java LOVs ??
Thanks & Best Regards,
MH

Syntax issue when having more than 20 warnings

Hello,
when having more than 20 warnings in a compilation unit (package, procedure ...),
SQL Developer ( version 1.5.0.53)
doesn't always flag an error (like, for example, a misspelled local variable),
so instead of a compile-time error a runtime error is generated.
I tried to reproduce the situation and here is a simplified case where i've
encountered the same error.
Best regards
Alexander Andris, Prague
[email protected]
CREATE OR REPLACE
PROCEDURE PROC AS
l_arg1 pls_integer;
l_arg2 pls_integer;
-- declarations which issue PLW-07204 warnings ...( 20 or more ...)
cursor c1 is
select sysdate from dual
where trunc (sysdate) = trunc(sysdate);
cursor c2 is
select sysdate from dual
where trunc (sysdate) = trunc(sysdate);
cursor c3 is
select sysdate from dual
where trunc (sysdate) = trunc(sysdate);
cursor c4 is
select sysdate from dual
where trunc (sysdate) = trunc(sysdate);
cursor c5 is
select sysdate from dual
where trunc (sysdate) = trunc(sysdate);
cursor c6 is
select sysdate from dual
where trunc (sysdate) = trunc(sysdate);
procedure proc1 is
begin
null;
end;
BEGIN
l_arg_notdef := 42;
-- next line would not be displayed.
dbms_output.put_line (
'Error in SQLDev 1.5.0 - error on the assignment line not flagged '
|| ' by the compiler when preceded by > 20 warnings ...' ||
' (Error not shown in navigator.Same behavior also in SQLDev 1.21 ...).');
-- So, when lines 5 - 23 are commented out then line 31 is flagged as an
-- error (PLS-00201), otherwise not (runtime error only).
-- When working on a large package with more than 20 warnings and a lot of
-- code, to find an error like a misspelled local variable one would need to
-- a different IDE.Hope it is not difficult to fix this quickly ...
-- Details:
-- client platform: Windows XP
-- SQLDev: Version 1.5.0.53 Build MAIN-53.38
-- db.: Oracle 10.2 on Windows
END PROC;

Unfortunately, that's the intended behaviour.
After complaining about errors not being reported in previous versions, they did add the "Only first 20 issues are reported" warning, but unless you know that can happen, almost nobody will notice.
I keep advocating for reporting errors on top, next any warnings, until having used up the 20 spaces. If necessary, they could compile first with warnings turned off, then again with warnings turned on.
I don't think I ever put a request for this on the SQL Developer Exchange, so take a look there if you're up for it.
Also mind you can turn the warnings off yourself inside the preferences, so they won't bother (nor help) you again.
Regards,
K.

Hi anyone please help .. i am facing issue with acrobat 11 pro version, in acrobat 7 we are able to compare 2 pdfs which are having more than 1000 pages but in acrobat 111 pro it not possible , if try do so acrobat will unresponsive.. please let me know

please let me know how can resolve this issue... how can i compare 2 pdfs which are having more than 1000 pages.
Acrobat

please let me know how can resolve this issue... how can i compare 2 pdfs which are having more than 1000 pages.
Acrobat

Elements 11: After selection tool defines move area, error message reads "No pixels are more than 50% selected". How to remedy?

Elements 11: After selection tool defines move area, error message reads "No pixels are more than 50% selected". How to remedy?

Are you certain that you are on the correct layer?
As a test, try this:
Select the object with one of the selection tools, e.g. lasso, selection brush.tool. You should see "marching ants" once the selection is complete
Place the selection on its own layer (Layer>new>layer via copy or CTRL+J). This will place the object on a separate layer.
With this layer active, use the move tool to move/position it
Does that work?

Title above ALV grid is having more than 70 chars.

Hi friends ,
I have a requirement in which title above ALV grid is having more than 70 chars.
But the layout structure of ALV (slis_layout_alv) is having a component called wiindow_title which is having maximum length of 70 chars. How to show the text having more than 70 chars over here ?

Hello Abhijit,
Its not possible to display more than 70 characters in ALV Title. May be you can try using Top of page and ALV list commentary write.
Regards,
Karthik D

When I access my google e-mail account on the I-pad my inbox has at least 6 e-mails with no sender and no subject (absent via I-phone, Mac or PC) I cannot delete them as they cannot be selected- how do I stop them and clear the ones there now?

When I access my google e-mail account on the I-pad my inbox has at least 6 e-mails with no sender and no subject (absent via I-phone, Mac or PC) I cannot delete them as they cannot be selected- how do I stop them and clear the ones there now?

Try turning the account off and on : Settings > Mail, Contacts, Calendars , then tap the account on the right, slide Mail to 'off', exit settings and go back into the Mail app, and then go back to Settings and slide Mail back to 'on'
If that doesn't work then try closing the Mail app completely : from the home screen (i.e. not with the Mail app 'open' on-screen) double-click the home button to bring up the taskbar, then press and hold any of the apps on the taskbar for a couple of seconds or so until they start shaking, then press the '-' in the top left of the Mail app to close it, and touch any part of the screen above the taskbar so as to stop the shaking and close the taskbar.
Also do a reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.

When I try to buy something, I get an Apple-ID which is not the one I want to use, and I don't know how to get rid of it either, so that I can use my ID, which is in Mail, Contacts etc. The ID I get, I can't find, so that I can delete it. What to do?

When I try to buy something, I get an Apple-ID which is not the one I want to use, and I don't know how to get rid of it either, so that I can replace it with my ID in Mail, contacts etc. The ID I get without wanting it, I can't find anywhere. I have to delete it. How do I solve this problem, anyone?

My content was obtained through another ID, which popped up earlier. Now this one doesn't pop up, and my current ID doesn't pop up either, but another one. How do you find an ID which is not in the store, and not in Mail, contacts etc. either?
Or is it possible to write the ID yourself when you want to buy something, not only to have it popped up being unable to be changed?

Export a BO report to excel having more than 65500 rows

Post Author: noble
CA Forum: .NET
Please let me know what are the different options available to export BO report having more than 65500 rows to excel 2003.

Post Author: amr_foci
CA Forum: .NET
i think excel will not be able to handle all that records , you can devide your report into some tabs based on a specific condition for every tab, so when you export it to excel you will get many tabs as was exist in the the Business Objects report
good luck

Having more than one mail box, how do I define which will be the one to send e-mails?

Similar Messages

Maybe you are looking for