Having Multiple issues..Need help to solve L870D ST3NX1
Dear All,
I recently bought new laptop from ToshibaDirect.com. (L870D ST3NX1)
As I have already posted the issue, I had problem with making partition and after using EasyUS partition software my machine was not able to recognize the recovery default partition created by Win8. I requested a recovery media image here in India but unfortunately Toshiba failed to help so..."Pathetic in 21st century".
However I have able to install a professional version of Win8 and my laptop is working now but leaves few issues behind it. I believe someone here help me to get resolve all issues.
I have downloaded almost all drivers from this site and installed successfully.
Issues:
1. I am not able to find out the right driver for the display screen (Not display card) and it is set to default as "Generic PnP Monitor". Will I able to get the original driver for it?
2. I guess because of the above issue, I have another issue with display: The text on the white screen seems to blur with letters "AJKMNOSVWXY bcegjkmnopqrsuvwxy' "()" etc. Those letters get blur at the side. I am not able to get sharp images. Kindly guide.
3. The RAM speed is actually 1600MHz as per specification but on my machine it shows only 800MHz, how can I increase it? (Image attached)
4. In the Device Manager utility I get the massage for "Unknown Device". I tried to remove the device but again it gets detected by system and shows unable to find appropriate drivers. (Image Attached)
5. For the Bluetooth I am unable to send a single file, if tried to send multiple files then all files my other Bluetooth device receives except the last one. (Error message image attached)
6. I unable to use function keys, as in the beginning I used to use it with installed default version of Win8 by Toshiba. I have installed the software and drivers too.
7. I use Adobe Illustrator CS5 for my graphic use, when I tried to work on a tuff task with vector graphics my Adobe Illustrator software showed the message "Not Responding" and it automatically quit the session. I was not running out of RAM or not seen to much pressure on CPU, then why it just gave up?
My previous machine with AMD Turion x2 processor, Win7-64bit install having 4GB RAM was taking much time to process the task while showing on the screen same message "Not Responding" but however get done the task. Why this advance machine with advance software and hardware is not baring the load? I am confuse..Please give me valid solution for this too.
Kindly help me for this issues.
Thanks,
Nixon
Attachments:
Bluetooth.JPG 40 KB
RAM Speed.JPG 67 KB
Unknown Device.JPG 67 KB
Up to 30? Just a guess, but are you perhaps a business owner?
At any rate, for 30 users, I'm almost tempted to steer you towards a business class WiFi router. Granted, yes, a "commercial" router will work, but a business class might also have options to limit bandwidth per user as well.
If you like my post, or solution to your issue/question, go ahead and click on the little star by my name and/or accept the post as the Solution. It makes me happy.
I'm NOT an employee of Best Buy, or Geek Squad, though I did work as an Agent for a year 5 years ago. None of my posts are to be taken as the official stance that Best Buy will take on your situation. My advice is just that, advice.
Unfortunately, that's the bad luck of any electronic, there's going to be bad Apples... wait that's a horrible pun.
Similar Messages
-
Safari Crashing Issue - Need Help Diagnosing/Solving
When i use safari, it randomly crashes,
i am not sure of the patterns and i previously thought it was the flash player. i reinstalled that and it kept happening.
so i was wondering what i could do it fix it, like maybe reinstall safari alltogether
(i have the "cooliris" plugin and a plugin called "inquisitor" which changed the search bar theme to blackish if this helps)
this is the report...
Date/Time: 2009-07-02 14:02:13 +1000
OS Version: 10.5.7 (Build 9J61)
Architecture: i386
Report Version: 4
Command: Safari
Path: /Applications/Safari.app/Contents/MacOS/Safari
Version: 4.0.1 (5530.18)
Build Version: 1
Project Name: WebBrowser
Source Version: 55301800
Parent: launchd [99]
PID: 4240
Event: hang
Time: 6.38s
Steps: 38
Process: Safari [4240]
Path: /Applications/Safari.app/Contents/MacOS/Safari
ADDRESS BINARY
00001000 /Applications/Safari.app/Contents/MacOS/Safari
002d0000 /Library/Google/Frameworks/Gild.framework/Resources/libgild.dylib
002d5000 /System/Library/PrivateFrameworks/SyndicationUI.framework/Versions/A/Syndicatio nUI
002f4000 /System/Library/Frameworks/PubSub.framework/Versions/A/PubSub
0048a000 /Library/Google/Frameworks/Gild.framework/Versions/A/Gild
00496000 /Library/Google/GoogleML/GoogleML.bundle/Contents/Resources/libgoogleml.dylib
004ed000 /Library/InputManagers/Cooliris/Cooliris.bundle/Contents/MacOS/Cooliris
004fa000 /Library/InputManagers/Cooliris/Cooliris.bundle/Contents/MacOS/libpiclenshelper .dylib
00600000 /Library/Frameworks/ApplicationEnhancer.framework/Versions/A/ApplicationEnhance r
00629000 /Library/Google/GoogleML/Modules/SafariSearchResults.googleml/Contents/MacOS/Sa fariSearchResults
0063a000 /Library/Google/GoogleML/Modules/SafariWebHistory.googleml/Contents/MacOS/Safar iWebHistory
0074e000 /Users/michaelowusu-afriyie/Library/Application Enhancers/Menu Master.ape/Contents/MacOS/Menu Master
00788000 /System/Library/Frameworks/OpenGL.framework/Versions/A/Resources/GLRendererFloa t.bundle/GLRendererFloat
099c5000 /System/Library/Frameworks/OpenGL.framework/Resources/GLEngine.bundle/GLEngine
0ad67000 /System/Library/CoreServices/RawCamera.bundle/Contents/MacOS/RawCamera
0b004000 /Library/InputManagers/Cooliris/Cooliris.bundle/Contents/MacOS/libcooliris.dyli b
0b970000 /System/Library/Extensions/ATIRadeonX2000GLDriver.bundle/Contents/MacOS/ATIRade onX2000GLDriver
0dc34000 /Library/InputManagers/Inquisitor/Inquisitor.bundle/Contents/MacOS/Inquisitor
0dc39000 /Library/InputManagers/Smart Crash Reports/Smart Crash Reports.bundle/Contents/MacOS/Smart Crash Reports
0dc50000 /Library/InputManagers/SIMBL/SIMBL.bundle/Contents/MacOS/SIMBL
0dd7c000 /Library/InputManagers/Inquisitor/Inquisitor.bundle/Contents/Resources/Inquisit orCore4.bundle/Contents/MacOS/InquisitorCore4
0ddb1000 /usr/lib/libcurl.3.dylib
0dde6000 /Users/michaelowusu-afriyie/Library/Application Support/SIMBL/Plugins/Afloat.bundle/Contents/MacOS/Afloat
0de8f000 /Users/michaelowusu-afriyie/Library/PreferencePanes/PlugSuit.prefPane/Contents/ PlugSuit Agent.app/Contents/Injected.plugsuit-support/Contents/MacOS/Injected
11112000 /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ CoreGraphics.framework/Versions/A/Resources/libCGXCoreImage.A.dylib
11148000 /Users/michaelowusu-afriyie/Library/PreferencePanes/PlugSuit.prefPane/Contents/ PlugSuit Agent.app/Contents/Injected.plugsuit-support/Contents/MacOS/PlugSuitSupport.dyl ib
121b5000 /System/Library/Frameworks/JavaVM.framework/Versions/A/Resources/JavaPluginCoco a.bundle/Contents/MacOS/JavaPluginCocoa
121bb000 /System/Library/Frameworks/JavaVM.framework/Versions/A/JavaVM
12aa2000 /System/Library/Frameworks/CoreAudioKit.framework/Versions/A/CoreAudioKit
12da9000 /Library/QuickTime/LiveType.component/Contents/MacOS/LiveType
1329e000 /System/Library/CoreServices/Encodings/libSimplifiedChineseConverter.dylib
133fb000 /Library/Internet Plug-Ins/Flash Player.plugin/Contents/MacOS/Flash Player
14b5e000 /System/Library/PrivateFrameworks/LiveType.framework/Versions/A/LiveType
14be3000 /Library/QuickTime/DivX Decoder.component/Contents/MacOS/DivX Decoder
17eee000 /usr/lib/liblangid.dylib
1a0a5000 /usr/lib/libmecab.1.0.0.dylib
1b623000 /System/Library/CoreServices/Encodings/libTraditionalChineseConverter.dylib
ba900000 /System/Library/CoreServices/Encodings/libJapaneseConverter.dylib
bab00000 /System/Library/CoreServices/Encodings/libKoreanConverter.dylibI have had this same problem.
It has been occurring ever since I updated from the Safari 4 Public Beta to the official Safari 4. I even updated the other day to Safari 4.1--but it still hangs and crashes.
I have been sending error reports only half the time it occurs. Usually I can't get past two pages, and it will hang on a page that has a lot of flash or java content--which I thought they had said if there was a problem with plugins in Safari 4, only the plugin would crash instead of the whole application. It seems to be the other way around, unfortunately.
I wish I had Time Machine set up so I could just roll back to the beta version and not deal with it, but I don't have an external drive to do that with.
Funny thing is, I run Windows Vista Business in Parallels--and I have to go to Windows to fix my Mac problem. Isn't this supposed to be the other way around? Haha, it's Vista nonetheless! -
I have been having multiple issues lately with my iMac
I have been having multiple issues lately with my iMac - starting with insanely slow processing/run speeds.
When I run Activity Monitor, consistently the highest usage of CPU is "ReportCrash" - typically shows up as 80-200% of CPU.
What could this be caused by?
I posted only a portion of the code from Activity Monitor but not sure what exactly is relevant or not. I can certainly post more if it's needed.
Many thanks!
Analysis of sampling ReportCrash (pid 332) every 1 millisecond
Process: ReportCrash [332]
Path: /System/Library/CoreServices/ReportCrash
Load Address: 0x10e14a000
Identifier: ReportCrash
Version: ??? (???)
Code Type: X86-64 (Native)
Parent Process: launchd [1]
Date/Time: 2013-04-23 18:17:29.753 -0400
OS Version: Mac OS X 10.8.3 (12D78)
Report Version: 7
Call graph:
2492 Thread_6876 DispatchQueue_1: com.apple.main-thread (serial)
+ 2492 start (in libdyld.dylib) + 1 [0x7fff847cd7e1]
+ 2492 ??? (in ReportCrash) load address 0x10e14a000 + 0xfb9c [0x10e159b9c]
+ 2492 -[NSConditionLock lockWhenCondition:beforeDate:] (in Foundation) + 235 [0x7fff815f1e39]
+ 2492 -[NSCondition waitUntilDate:] (in Foundation) + 357 [0x7fff815f1fe3]
+ 2492 _pthread_cond_wait (in libsystem_c.dylib) + 927 [0x7fff86326023]
+ 2492 __psynch_cvwait (in libsystem_kernel.dylib) + 10 [0x7fff8b52f0fa]
2491 Thread_6877 DispatchQueue_2: com.apple.libdispatch-manager (serial)
+ 2491 _dispatch_mgr_thread (in libdispatch.dylib) + 54 [0x7fff887179ee]
+ 2481 _dispatch_mgr_invoke (in libdispatch.dylib) + 883 [0x7fff88717dea]
+ ! 2481 kevent (in libsystem_kernel.dylib) + 10 [0x7fff8b52fd16]
+ 8 _dispatch_mgr_invoke (in libdispatch.dylib) + 134 [0x7fff88717afd]
+ ! 4 _dispatch_mgr_thread2 (in libdispatch.dylib) + 43 [0x7fff887180a8]
+ ! : 3 _dispatch_queue_drain (in libdispatch.dylib) + 180 [0x7fff88716448]
+ ! : | 2 _dispatch_queue_invoke (in libdispatch.dylib) + 72 [0x7fff88716305]
+ ! : | + 1 _dispatch_source_invoke (in libdispatch.dylib) + 58 [0x7fff88717022]
+ ! : | + ! 1 _dispatch_kevent_register (in libdispatch.dylib) + 280 [0x7fff887173f4]
+ ! : | + ! 1 _dispatch_source_kevent_resume (in libdispatch.dylib) + 63 [0x7fff88717513]
+ ! : | + ! 1 _dispatch_kevent_resume (in libdispatch.dylib) + 92 [0x7fff88717588]
+ ! : | + ! 1 _dispatch_kevent_machport_resume (in libdispatch.dylib) + 96 [0x7fff887175ec]
+ ! : | + ! 1 mach_port_move_member (in libsystem_kernel.dylib) + 31 [0x7fff8b52e539]
+ ! : | + ! 1 _kernelrpc_mach_port_move_member_trap (in libsystem_kernel.dylib) + 10 [0x7fff8b52d626]
+ ! : | + 1 _dispatch_source_invoke (in libdispatch.dylib) + 257 [0x7fff887170e9]
+ ! : | + 1 _dispatch_kevent_unregister (in libdispatch.dylib) + 286 [0x7fff887189ad]
+ ! : | + 1 free (in libsystem_c.dylib) + 199 [0x7fff8633a8f8]
+ ! : | + 1 szone_free_definite_size (in libsystem_c.dylib) + 211 [0x7fff8634012c]
+ ! : | + 1 _spin_lock$VARIANT$mp (in libsystem_c.dylib) + 13 [0x7fff8630ff9d]
+ ! : | 1 _dispatch_queue_push_list_slow2 (in libdispatch.dylib) + 33 [0x7fff88715e10]
+ ! : | 1 _dispatch_wakeup (in libdispatch.dylib) + 132 [0x7fff88715ecd]
+ ! : | 1 _dispatch_queue_wakeup_global_slow (in libdispatch.dylib) + 59 [0x7fff88716073]
+ ! : | 1 pthread_workqueue_addthreads_np (in libsystem_c.dylib) + 47 [0x7fff86324016]
+ ! : | 1 __workq_kernreturn (in libsystem_kernel.dylib) + 10 [0x7fff8b52f6d6]
+ ! : 1 _dispatch_queue_drain (in libdispatch.dylib) + 48 [0x7fff887163c4]
+ ! 3 _dispatch_mgr_thread2 (in libdispatch.dylib) + 71 [0x7fff887180c4]
+ ! : 3 _dispatch_source_drain_kevent (in libdispatch.dylib) + 172 [0x7fff887186d2]
+ ! : 3 _dispatch_source_merge_kevent (in libdispatch.dylib) + 226 [0x7fff88718858]
+ ! : 3 _dispatch_wakeup (in libdispatch.dylib) + 132 [0x7fff88715ecd]
+ ! : 3 _dispatch_queue_push_list_slow2 (in libdispatch.dylib) + 33 [0x7fff88715e10]
+ ! : 3 _dispatch_wakeup (in libdispatch.dylib) + 132 [0x7fff88715ecd]
+ ! : 3 _dispatch_queue_wakeup_global_slow (in libdispatch.dylib) + 59 [0x7fff88716073]
+ ! : 3 pthread_workqueue_addthreads_np (in libsystem_c.dylib) + 47 [0x7fff86324016]
+ ! : 3 __workq_kernreturn (in libsystem_kernel.dylib) + 10 [0x7fff8b52f6d6]
+ ! 1 _dispatch_mgr_thread2 (in libdispatch.dylib) + 61 [0x7fff887180ba]
+ ! 1 _dispatch_cache_cleanup (in libdispatch.dylib) + 30 [0x7fff88716695]
+ ! 1 szone_free (in libsystem_c.dylib) + 473 [0x7fff8633c91d]
+ ! 1 _spin_lock$VARIANT$mp (in libsystem_c.dylib) + 13 [0x7fff8630ff9d]
+ 2 _dispatch_mgr_invoke (in libdispatch.dylib) + 858,885 [0x7fff88717dd1,0x7fff88717dec]It would help to know more about your iMac.
What year, screen size, CPU speed and amount of RAM installed?
How full is your Mac's hard drive?
How many applications do you run simultaneously in the background while working in another application?
Do you run any antivirus software on your Mac? Antivirus software can slow down the normal operation of OS X.
Do you run any "crapware" like Mackeeper or any other type of so called hard drive "cleaning" apps?
Have you downloaded and installed anything recently that might have caused the erratic behaviour of your iMac? -
I am having multiple issues with syncing my iphone calendar and outlook calendar on my laptop
I mostly enter the original items on my laptop
There are often 1 hour time differences in the entries on the 2 devices and sometimes events that have been amended are not updated on iphoneThis sounds like an error in Time Zone support. The time zone needs to be the same in Outlook as well as the phone.
-
My mac mail on both the desk top and Iphone is having multiple issues downloading e-mail from my At
My mac mail on both the desk top and Iphone is having multiple issues downloading e-mail from my At&t
You can get faster help by posting the Mac OS version you have and more details about your iMac. They have been in continuous productionsince 1998 with four distinct procesor families, and each ahve different troubleshooting steps. If you called a Ford dealer about a car problem, the first thing ithey will ask is "which Ford model and year?" Same deal here.
The processor description is found when you do "About this Mac" and will be a good start for identifying your iMac model; the Mac OSX will be there too. -
Need Help In Solving Writing To Queue Problem
Hi Guys,
I have two threads that are adding to the same message queue. The first one is suppose to add four integers consecutively. Meanwhile the second thread add an integer in between the four integers. Because of that my application is not working properly. I would like that when a thread is adding then the other must wait before it adds. The method that the threads call to add to the queue are all synchronized, but it is still behaving like that.
I need help in solving it.
Thanks.
Edited by: kap on Aug 9, 2010 5:22 AMkap wrote:
Please what do you mean by synchronizing on the same object? Can you explain it to me?
When you synchronize a block of Java code, you synchronize on a particular object, which is called the Monitor.
The effect is only to prevent another thread running this, or another block of code synchronized on the same object.
If you use synchronized methods, then the monitor is the object to which the method belongs (or the class if the method is static). The same synchronized method can be executed simultaneously on a different instance of the object. -
Need help in solving java.io.NotSerializableException
Hi,
Weblogic 9.2
I need help in solving the java.io.NotSerializableException: weblogic.jndi.internal.ApplicationNamingNode
I dont know why ApplicationNamingNode has to be serialized.
Full stack trace will be provided if needed.
thank youHere is the stack trace
Remote service [com.gfs.corp.component.price.customerbid.PCBMaint] threw exception
weblogic.rjvm.PeerGoneException: ; nested exception is:
java.rmi.UnmarshalException: Incoming message header or abbreviation processing failed ; nested exception is:
java.io.WriteAbortedException: writing aborted; java.io.NotSerializableException: weblogic.jndi.internal.ApplicationNamingNode
at weblogic.rjvm.ResponseImpl.unmarshalReturn(ResponseImpl.java:211)
at weblogic.rmi.cluster.ClusterableRemoteRef.invoke(ClusterableRemoteRef.java:338)
at weblogic.rmi.cluster.ClusterableRemoteRef.invoke(ClusterableRemoteRef.java:252)
at com.gfs.corp.component.price.maint.customerbid.ejb.PCBMaint_q9igfc_EOImpl_922_WLStub.createBid(Unknown Source)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:585)
at org.springframework.remoting.rmi.RmiClientInterceptorUtils.doInvoke(RmiClientInterceptorUtils.java:107)
at org.springframework.ejb.access.SimpleRemoteSlsbInvokerInterceptor.doInvoke(SimpleRemoteSlsbInvokerInterceptor.java:75)
at org.springframework.ejb.access.AbstractRemoteSlsbInvokerInterceptor.invoke(AbstractRemoteSlsbInvokerInterceptor.java:119)
at org.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
at org.springframework.aop.framework.JdkDynamicAopProxy.invoke(JdkDynamicAopProxy.java:204)
at $Proxy47.createBid(Unknown Source)
at com.gfs.corp.bid.price.controller.DefaultBidPriceUpdater.awardBid(DefaultBidPriceUpdater.java:83)
at com.gfs.corp.bid.price.ejb.AwardQueueMessageHandler.onMessage(AwardQueueMessageHandler.java:98)
at weblogic.ejb.container.internal.MDListener.execute(MDListener.java:429)
at weblogic.ejb.container.internal.MDListener.transactionalOnMessage(MDListener.java:335)
at weblogic.ejb.container.internal.MDListener.onMessage(MDListener.java:291)
at weblogic.jms.client.JMSSession.onMessage(JMSSession.java:4072)
at weblogic.jms.client.JMSSession.execute(JMSSession.java:3962)
at weblogic.jms.client.JMSSession$UseForRunnable.run(JMSSession.java:4490)
at weblogic.work.ServerWorkManagerImpl$WorkAdapterImpl.run(ServerWorkManagerImpl.java:518)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:181)
Caused by: java.rmi.UnmarshalException: Incoming message header or abbreviation processing failed ; nested exception is:
java.io.WriteAbortedException: writing aborted; java.io.NotSerializableException: weblogic.jndi.internal.ApplicationNamingNode
at weblogic.rjvm.MsgAbbrevJVMConnection.dispatch(MsgAbbrevJVMConnection.java:441)
at weblogic.rjvm.t3.MuxableSocketT3.dispatch(MuxableSocketT3.java:368)
at weblogic.socket.AbstractMuxableSocket.dispatch(AbstractMuxableSocket.java:378)
at weblogic.socket.NTSocketMuxer.processSockets(NTSocketMuxer.java:105)
at weblogic.socket.SocketReaderRequest.run(SocketReaderRequest.java:29)
at weblogic.socket.SocketReaderRequest.execute(SocketReaderRequest.java:42)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:145)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:117)
Caused by: java.io.WriteAbortedException: writing aborted; java.io.NotSerializableException: weblogic.jndi.internal.ApplicationNamingNode
at java.io.ObjectInputStream.readObject0(ObjectInputStream.java:1309)
at java.io.ObjectInputStream.readObject(ObjectInputStream.java:348)
at weblogic.transaction.internal.PropagationContext.readRollbackReason(PropagationContext.java:804)
at weblogic.transaction.internal.PropagationContext.readExternal(PropagationContext.java:376)
at java.io.ObjectInputStream.readExternalData(ObjectInputStream.java:1755)
at java.io.ObjectInputStream.readOrdinaryObject(ObjectInputStream.java:1717)
at java.io.ObjectInputStream.readObject0(ObjectInputStream.java:1305)
at java.io.ObjectInputStream.readObject(ObjectInputStream.java:348)
at weblogic.rmi.provider.BasicServiceContext.readExternal(BasicServiceContext.java:56)
at java.io.ObjectInputStream.readExternalData(ObjectInputStream.java:1755)
at java.io.ObjectInputStream.readOrdinaryObject(ObjectInputStream.java:1717)
at java.io.ObjectInputStream.readObject0(ObjectInputStream.java:1305)
at java.io.ObjectInputStream.readObject(ObjectInputStream.java:348)
at weblogic.utils.io.ChunkedObjectInputStream.readObject(ChunkedObjectInputStream.java:195)
at weblogic.rjvm.MsgAbbrevInputStream.readObject(MsgAbbrevInputStream.java:565)
at weblogic.rjvm.MsgAbbrevInputStream.readExtendedContexts(MsgAbbrevInputStream.java:224)
at weblogic.rjvm.MsgAbbrevInputStream.init(MsgAbbrevInputStream.java:188)
at weblogic.rjvm.MsgAbbrevJVMConnection.dispatch(MsgAbbrevJVMConnection.java:435)
... 7 more
Caused by: java.io.NotSerializableException: weblogic.jndi.internal.ApplicationNamingNode
at java.io.ObjectOutputStream.writeObject0(ObjectOutputStream.java:1081)
at java.io.ObjectOutputStream.writeObject(ObjectOutputStream.java:302)
at weblogic.jndi.internal.WLContextImpl.writeExternal(WLContextImpl.java:453)
at weblogic.jndi.internal.WLEventContextImpl.writeExternal(WLEventContextImpl.java:422)
at java.io.ObjectOutputStream.writeExternalData(ObjectOutputStream.java:1310)
at java.io.ObjectOutputStream.writeOrdinaryObject(ObjectOutputStream.java:1288)
at java.io.ObjectOutputStream.writeObject0(ObjectOutputStream.java:1079)
at java.io.ObjectOutputStream.defaultWriteFields(ObjectOutputStream.java:1375)
at java.io.ObjectOutputStream.writeSerialData(ObjectOutputStream.java:1347)
at java.io.ObjectOutputStream.writeOrdinaryObject(ObjectOutputStream.java:1290)
at java.io.ObjectOutputStream.writeObject0(ObjectOutputStream.java:1079)
at java.io.ObjectOutputStream.defaultWriteFields(ObjectOutputStream.java:1375)
at java.io.ObjectOutputStream.writeSerialData(ObjectOutputStream.java:1347)
at java.io.ObjectOutputStream.writeOrdinaryObject(ObjectOutputStream.java:1290)
at java.io.ObjectOutputStream.writeObject0(ObjectOutputStream.java:1079)
at java.io.ObjectOutputStream.defaultWriteFields(ObjectOutputStream.java:1375)
at java.io.ObjectOutputStream.writeSerialData(ObjectOutputStream.java:1347)
at java.io.ObjectOutputStream.writeOrdinaryObject(ObjectOutputStream.java:1290)
at java.io.ObjectOutputStream.writeObject0(ObjectOutputStream.java:1079)
at java.io.ObjectOutputStream.defaultWriteFields(ObjectOutputStream.java:1375)
at java.io.ObjectOutputStream.writeSerialData(ObjectOutputStream.java:1347)
at java.io.ObjectOutputStream.writeOrdinaryObject(ObjectOutputStream.java:1290)
at java.io.ObjectOutputStream.writeObject0(ObjectOutputStream.java:1079)
at java.io.ObjectOutputStream.defaultWriteFields(ObjectOutputStream.java:1375)
at java.io.ObjectOutputStream.writeSerialData(ObjectOutputStream.java:1347)
at java.io.ObjectOutputStream.writeOrdinaryObject(ObjectOutputStream.java:1290)
at java.io.ObjectOutputStream.writeObject0(ObjectOutputStream.java:1079)
at java.io.ObjectOutputStream.defaultWriteFields(ObjectOutputStream.java:1375)
at java.io.ObjectOutputStream.writeSerialData(ObjectOutputStream.java:1347)
at java.io.ObjectOutputStream.writeOrdinaryObject(ObjectOutputStream.java:1290)
at java.io.ObjectOutputStream.writeObject0(ObjectOutputStream.java:1079)
at java.io.ObjectOutputStream.defaultWriteFields(ObjectOutputStream.java:1375)
at java.io.ObjectOutputStream.writeSerialData(ObjectOutputStream.java:1347)
at java.io.ObjectOutputStream.writeOrdinaryObject(ObjectOutputStream.java:1290)
at java.io.ObjectOutputStream.writeObject0(ObjectOutputStream.java:1079)
at java.io.ObjectOutputStream.defaultWriteFields(ObjectOutputStream.java:1375)
at java.io.ObjectOutputStream.writeSerialData(ObjectOutputStream.java:1347)
at java.io.ObjectOutputStream.writeOrdinaryObject(ObjectOutputStream.java:1290)
at java.io.ObjectOutputStream.writeObject0(ObjectOutputStream.java:1079)
at java.io.ObjectOutputStream.defaultWriteFields(ObjectOutputStream.java:1375)
at java.io.ObjectOutputStream.writeSerialData(ObjectOutputStream.java:1347)
at java.io.ObjectOutputStream.writeOrdinaryObject(ObjectOutputStream.java:1290)
at java.io.ObjectOutputStream.writeObject0(ObjectOutputStream.java:1079)
at java.io.ObjectOutputStream.defaultWriteFields(ObjectOutputStream.java:1375)
at java.io.ObjectOutputStream.writeSerialData(ObjectOutputStream.java:1347)
at java.io.ObjectOutputStream.writeOrdinaryObject(ObjectOutputStream.java:1290)
at java.io.ObjectOutputStream.writeObject0(ObjectOutputStream.java:1079)
at java.io.ObjectOutputStream.defaultWriteFields(ObjectOutputStream.java:1375)
at java.io.ObjectOutputStream.writeSerialData(ObjectOutputStream.java:1347)
at java.io.ObjectOutputStream.writeOrdinaryObject(ObjectOutputStream.java:1290)
at java.io.ObjectOutputStream.writeObject0(ObjectOutputStream.java:1079)
at java.io.ObjectOutputStream.defaultWriteFields(ObjectOutputStream.java:1375)
at java.io.ObjectOutputStream.writeSerialData(ObjectOutputStream.java:1347)
at java.io.ObjectOutputStream.writeOrdinaryObject(ObjectOutputStream.java:1290)
at java.io.ObjectOutputStream.writeObject0(ObjectOutputStream.java:1079)
at java.io.ObjectOutputStream.defaultWriteFields(ObjectOutputStream.java:1375)
at java.io.ObjectOutputStream.writeSerialData(ObjectOutputStream.java:1347)
at java.io.ObjectOutputStream.writeOrdinaryObject(ObjectOutputStream.java:1290)
at java.io.ObjectOutputStream.writeObject0(ObjectOutputStream.java:1079)
at java.io.ObjectOutputStream.defaultWriteFields(ObjectOutputStream.java:1375)
at java.io.ObjectOutputStream.writeSerialData(ObjectOutputStream.java:1347)
at java.io.ObjectOutputStream.writeOrdinaryObject(ObjectOutputStream.java:1290)
at java.io.ObjectOutputStream.writeObject0(ObjectOutputStream.java:1079)
at java.io.ObjectOutputStream.defaultWriteFields(ObjectOutputStream.java:1375)
at java.io.ObjectOutputStream.writeSerialData(ObjectOutputStream.java:1347)
at java.io.ObjectOutputStream.writeOrdinaryObject(ObjectOutputStream.java:1290)
at java.io.ObjectOutputStream.writeObject0(ObjectOutputStream.java:1079)
at java.io.ObjectOutputStream.defaultWriteFields(ObjectOutputStream.java:1375)
at java.io.ObjectOutputStream.writeSerialData(ObjectOutputStream.java:1347)
at java.io.ObjectOutputStream.writeOrdinaryObject(ObjectOutputStream.java:1290)
at java.io.ObjectOutputStream.writeObject0(ObjectOutputStream.java:1079)
at java.io.ObjectOutputStream.writeObject(ObjectOutputStream.java:302)
at weblogic.transaction.internal.PropagationContext.convertRollbackReasonToBytes(PropagationContext.java:735)
at weblogic.transaction.internal.PropagationContext.writeRollbackReason(PropagationContext.java:819)
at weblogic.transaction.internal.PropagationContext.writeExternal(PropagationContext.java:183)
at java.io.ObjectOutputStream.writeExternalData(ObjectOutputStream.java:1310)
at java.io.ObjectOutputStream.writeOrdinaryObject(ObjectOutputStream.java:1288)
at java.io.ObjectOutputStream.writeObject0(ObjectOutputStream.java:1079)
at java.io.ObjectOutputStream.writeObject(ObjectOutputStream.java:302)
at weblogic.rmi.provider.BasicServiceContext.writeExternal(BasicServiceContext.java:48)
at java.io.ObjectOutputStream.writeExternalData(ObjectOutputStream.java:1310)
at java.io.ObjectOutputStream.writeOrdinaryObject(ObjectOutputStream.java:1288)
at java.io.ObjectOutputStream.writeObject0(ObjectOutputStream.java:1079)
at java.io.ObjectOutputStream.writeObject(ObjectOutputStream.java:302)
at weblogic.rjvm.MsgAbbrevOutputStream.writeObject(MsgAbbrevOutputStream.java:614)
at weblogic.rjvm.MsgAbbrevOutputStream.marshalCustomCallData(MsgAbbrevOutputStream.java:319)
at weblogic.rjvm.MsgAbbrevOutputStream.transferThreadLocalContext(MsgAbbrevOutputStream.java:149)
at weblogic.rmi.internal.BasicServerRef.postInvoke(BasicServerRef.java:606)
at weblogic.rmi.internal.BasicServerRef.handleRequest(BasicServerRef.java:455)
at weblogic.rmi.internal.BasicServerRef.access$300(BasicServerRef.java:58)
at weblogic.rmi.internal.BasicServerRef$BasicExecuteRequest.run(BasicServerRef.java:975)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:181)
2007-10-18 08:38:04,931 [[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'] WARN org.springframework.ejb.access.SimpleRemoteStatelessSessionProxyFactoryBean - Could not invoke 'remove' on remote EJB proxy
weblogic.rjvm.PeerGoneException: ; nested exception is:
java.rmi.UnmarshalException: Incoming message header or abbreviation processing failed ; nested exception is:
java.io.WriteAbortedException: writing aborted; java.io.NotSerializableException: weblogic.jndi.internal.ApplicationNamingNode
at weblogic.rjvm.ResponseImpl.unmarshalReturn(ResponseImpl.java:211)
at weblogic.rmi.cluster.ClusterableRemoteRef.invoke(ClusterableRemoteRef.java:338)
at weblogic.rmi.cluster.ClusterableRemoteRef.invoke(ClusterableRemoteRef.java:252)
at com.gfs.corp.component.price.maint.customerbid.ejb.PCBMaint_q9igfc_EOImpl_922_WLStub.remove(Unknown Source)
at org.springframework.ejb.access.AbstractRemoteSlsbInvokerInterceptor.removeSessionBeanInstance(AbstractRemoteSlsbInvokerInterceptor.java:227)
at org.springframework.ejb.access.SimpleRemoteSlsbInvokerInterceptor.releaseSessionBeanInstance(SimpleRemoteSlsbInvokerInterceptor.java:118)
at org.springframework.ejb.access.SimpleRemoteSlsbInvokerInterceptor.doInvoke(SimpleRemoteSlsbInvokerInterceptor.java:95)
at org.springframework.ejb.access.AbstractRemoteSlsbInvokerInterceptor.invoke(AbstractRemoteSlsbInvokerInterceptor.java:119)
at org.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
at org.springframework.aop.framework.JdkDynamicAopProxy.invoke(JdkDynamicAopProxy.java:204)
at $Proxy47.createBid(Unknown Source)
at com.gfs.corp.bid.price.controller.DefaultBidPriceUpdater.awardBid(DefaultBidPriceUpdater.java:83)
at com.gfs.corp.bid.price.ejb.AwardQueueMessageHandler.onMessage(AwardQueueMessageHandler.java:98)
at weblogic.ejb.container.internal.MDListener.execute(MDListener.java:429)
at weblogic.ejb.container.internal.MDListener.transactionalOnMessage(MDListener.java:335)
at weblogic.ejb.container.internal.MDListener.onMessage(MDListener.java:291)
at weblogic.jms.client.JMSSession.onMessage(JMSSession.java:4072)
at weblogic.jms.client.JMSSession.execute(JMSSession.java:3962)
at weblogic.jms.client.JMSSession$UseForRunnable.run(JMSSession.java:4490)
at weblogic.work.ServerWorkManagerImpl$WorkAdapterImpl.run(ServerWorkManagerImpl.java:518)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:181)
Caused by: java.rmi.UnmarshalException: Incoming message header or abbreviation processing failed ; nested exception is:
java.io.WriteAbortedException: writing aborted; java.io.NotSerializableException: weblogic.jndi.internal.ApplicationNamingNode
at weblogic.rjvm.MsgAbbrevJVMConnection.dispatch(MsgAbbrevJVMConnection.java:441)
at weblogic.rjvm.t3.MuxableSocketT3.dispatch(MuxableSocketT3.java:368)
at weblogic.socket.AbstractMuxableSocket.dispatch(AbstractMuxableSocket.java:378)
at weblogic.socket.NTSocketMuxer.processSockets(NTSocketMuxer.java:105)
at weblogic.socket.SocketReaderRequest.run(SocketReaderRequest.java:29)
at weblogic.socket.SocketReaderRequest.execute(SocketReaderRequest.java:42)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:145)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:117)
Caused by: java.io.WriteAbortedException: writing aborted; java.io.NotSerializableException: weblogic.jndi.internal.ApplicationNamingNode
at java.io.ObjectInputStream.readObject0(ObjectInputStream.java:1309)
at java.io.ObjectInputStream.readObject(ObjectInputStream.java:348)
at weblogic.transaction.internal.PropagationContext.readRollbackReason(PropagationContext.java:804)
at weblogic.transaction.internal.PropagationContext.readExternal(PropagationContext.java:376)
at java.io.ObjectInputStream.readExternalData(ObjectInputStream.java:1755)
at java.io.ObjectInputStream.readOrdinaryObject(ObjectInputStream.java:1717)
at java.io.ObjectInputStream.readObject0(ObjectInputStream.java:1305)
at java.io.ObjectInputStream.readObject(ObjectInputStream.java:348)
at weblogic.rmi.provider.BasicServiceContext.readExternal(BasicServiceContext.java:56)
at java.io.ObjectInputStream.readExternalData(ObjectInputStream.java:1755)
at java.io.ObjectInputStream.readOrdinaryObject(ObjectInputStream.java:1717)
at java.io.ObjectInputStream.readObject0(ObjectInputStream.java:1305)
at java.io.ObjectInputStream.readObject(ObjectInputStream.java:348)
at weblogic.utils.io.ChunkedObjectInputStream.readObject(ChunkedObjectInputStream.java:195)
at weblogic.rjvm.MsgAbbrevInputStream.readObject(MsgAbbrevInputStream.java:565)
at weblogic.rjvm.MsgAbbrevInputStream.readExtendedContexts(MsgAbbrevInputStream.java:224)
at weblogic.rjvm.MsgAbbrevInputStream.init(MsgAbbrevInputStream.java:188)
at weblogic.rjvm.MsgAbbrevJVMConnection.dispatch(MsgAbbrevJVMConnection.java:435)
... 7 more
Caused by: java.io.NotSerializableException: weblogic.jndi.internal.ApplicationNamingNode
at java.io.ObjectOutputStream.writeObject0(ObjectOutputStream.java:1081)
at java.io.ObjectOutputStream.writeObject(ObjectOutputStream.java:302)
at weblogic.jndi.internal.WLContextImpl.writeExternal(WLContextImpl.java:453)
at weblogic.jndi.internal.WLEventContextImpl.writeExternal(WLEventContextImpl.java:422)
at java.io.ObjectOutputStream.writeExternalData(ObjectOutputStream.java:1310)
at java.io.ObjectOutputStream.writeOrdinaryObject(ObjectOutputStream.java:1288)
at java.io.ObjectOutputStream.writeObject0(ObjectOutputStream.java:1079)
at java.io.ObjectOutputStream.defaultWriteFields(ObjectOutputStream.java:1375)
at java.io.ObjectOutputStream.writeSerialData(ObjectOutputStream.java:1347)
at java.io.ObjectOutputStream.writeOrdinaryObject(ObjectOutputStream.java:1290)
at java.io.ObjectOutputStream.writeObject0(ObjectOutputStream.java:1079)
at java.io.ObjectOutputStream.defaultWriteFields(ObjectOutputStream.java:1375)
at java.io.ObjectOutputStream.writeSerialData(ObjectOutputStream.java:1347)
at java.io.ObjectOutputStream.writeOrdinaryObject(ObjectOutputStream.java:1290)
at java.io.ObjectOutputStream.writeObject0(ObjectOutputStream.java:1079)
at java.io.ObjectOutputStream.defaultWriteFields(ObjectOutputStream.java:1375)
at java.io.ObjectOutputStream.writeSerialData(ObjectOutputStream.java:1347)
at java.io.ObjectOutputStream.writeOrdinaryObject(ObjectOutputStream.java:1290)
at java.io.ObjectOutputStream.writeObject0(ObjectOutputStream.java:1079)
at java.io.ObjectOutputStream.defaultWriteFields(ObjectOutputStream.java:1375)
at java.io.ObjectOutputStream.writeSerialData(ObjectOutputStream.java:1347)
at java.io.ObjectOutputStream.writeOrdinaryObject(ObjectOutputStream.java:1290)
at java.io.ObjectOutputStream.writeObject0(ObjectOutputStream.java:1079)
at java.io.ObjectOutputStream.defaultWriteFields(ObjectOutputStream.java:1375)
at java.io.ObjectOutputStream.writeSerialData(ObjectOutputStream.java:1347)
at java.io.ObjectOutputStream.writeOrdinaryObject(ObjectOutputStream.java:1290)
at java.io.ObjectOutputStream.writeObject0(ObjectOutputStream.java:1079)
at java.io.ObjectOutputStream.defaultWriteFields(ObjectOutputStream.java:1375)
at java.io.ObjectOutputStream.writeSerialData(ObjectOutputStream.java:1347)
at java.io.ObjectOutputStream.writeOrdinaryObject(ObjectOutputStream.java:1290)
at java.io.ObjectOutputStream.writeObject0(ObjectOutputStream.java:1079)
at java.io.ObjectOutputStream.defaultWriteFields(ObjectOutputStream.java:1375)
at java.io.ObjectOutputStream.writeSerialData(ObjectOutputStream.java:1347)
at java.io.ObjectOutputStream.writeOrdinaryObject(ObjectOutputStream.java:1290)
at java.io.ObjectOutputStream.writeObject0(ObjectOutputStream.java:1079)
at java.io.ObjectOutputStream.defaultWriteFields(ObjectOutputStream.java:1375)
at java.io.ObjectOutputStream.writeSerialData(ObjectOutputStream.java:1347)
at java.io.ObjectOutputStream.writeOrdinaryObject(ObjectOutputStream.java:1290)
at java.io.ObjectOutputStream.writeObject0(ObjectOutputStream.java:1079)
at java.io.ObjectOutputStream.defaultWriteFields(ObjectOutputStream.java:1375)
at java.io.ObjectOutputStream.writeSerialData(ObjectOutputStream.java:1347)
at java.io.ObjectOutputStream.writeOrdinaryObject(ObjectOutputStream.java:1290)
at java.io.ObjectOutputStream.writeObject0(ObjectOutputStream.java:1079)
at java.io.ObjectOutputStream.defaultWriteFields(ObjectOutputStream.java:1375)
at java.io.ObjectOutputStream.writeSerialData(ObjectOutputStream.java:1347)
at java.io.ObjectOutputStream.writeOrdinaryObject(ObjectOutputStream.java:1290)
at java.io.ObjectOutputStream.writeObject0(ObjectOutputStream.java:1079)
at java.io.ObjectOutputStream.defaultWriteFields(ObjectOutputStream.java:1375)
at java.io.ObjectOutputStream.writeSerialData(ObjectOutputStream.java:1347)
at java.io.ObjectOutputStream.writeOrdinaryObject(ObjectOutputStream.java:1290)
at java.io.ObjectOutputStream.writeObject0(ObjectOutputStream.java:1079)
at java.io.ObjectOutputStream.defaultWriteFields(ObjectOutputStream.java:1375)
at java.io.ObjectOutputStream.writeSerialData(ObjectOutputStream.java:1347)
at java.io.ObjectOutputStream.writeOrdinaryObject(ObjectOutputStream.java:1290)
at java.io.ObjectOutputStream.writeObject0(ObjectOutputStream.java:1079)
at java.io.ObjectOutputStream.defaultWriteFields(ObjectOutputStream.java:1375)
at java.io.ObjectOutputStream.writeSerialData(ObjectOutputStream.java:1347)
at java.io.ObjectOutputStream.writeOrdinaryObject(ObjectOutputStream.java:1290)
at java.io.ObjectOutputStream.writeObject0(ObjectOutputStream.java:1079)
at java.io.ObjectOutputStream.defaultWriteFields(ObjectOutputStream.java:1375)
at java.io.ObjectOutputStream.writeSerialData(ObjectOutputStream.java:1347)
at java.io.ObjectOutputStream.writeOrdinaryObject(ObjectOutputStream.java:1290)
at java.io.ObjectOutputStream.writeObject0(ObjectOutputStream.java:1079)
at java.io.ObjectOutputStream.defaultWriteFields(ObjectOutputStream.java:1375)
at java.io.ObjectOutputStream.writeSerialData(ObjectOutputStream.java:1347)
at java.io.ObjectOutputStream.writeOrdinaryObject(ObjectOutputStream.java:1290)
at java.io.ObjectOutputStream.writeObject0(ObjectOutputStream.java:1079)
at java.io.ObjectOutputStream.defaultWriteFields(ObjectOutputStream.java:1375)
at java.io.ObjectOutputStream.writeSerialData(ObjectOutputStream.java:1347)
at java.io.ObjectOutputStream.writeOrdinaryObject(ObjectOutputStream.java:1290)
at java.io.ObjectOutputStream.writeObject0(ObjectOutputStream.java:1079)
at java.io.ObjectOutputStream.writeObject(ObjectOutputStream.java:302)
at weblogic.transaction.internal.PropagationContext.convertRollbackReasonToBytes(PropagationContext.java:735)
at weblogic.transaction.internal.PropagationContext.writeRollbackReason(PropagationContext.java:819)
at weblogic.transaction.internal.PropagationContext.writeExternal(PropagationContext.java:183)
at java.io.ObjectOutputStream.writeExternalData(ObjectOutputStream.java:1310)
at java.io.ObjectOutputStream.writeOrdinaryObject(ObjectOutputStream.java:1288)
at java.io.ObjectOutputStream.writeObject0(ObjectOutputStream.java:1079)
at java.io.ObjectOutputStream.writeObject(ObjectOutputStream.java:302)
at weblogic.rmi.provider.BasicServiceContext.writeExternal(BasicServiceContext.java:48)
at java.io.ObjectOutputStream.writeExternalData(ObjectOutputStream.java:1310)
at java.io.ObjectOutputStream.writeOrdinaryObject(ObjectOutputStream.java:1288)
at java.io.ObjectOutputStream.writeObject0(ObjectOutputStream.java:1079)
at java.io.ObjectOutputStream.writeObject(ObjectOutputStream.java:302)
at weblogic.rjvm.MsgAbbrevOutputStream.writeObject(MsgAbbrevOutputStream.java:614)
at weblogic.rjvm.MsgAbbrevOutputStream.marshalCustomCallData(MsgAbbrevOutputStream.java:319)
at weblogic.rjvm.MsgAbbrevOutputStream.transferThreadLocalContext(MsgAbbrevOutputStream.java:149)
at weblogic.rmi.internal.ReplyOnError.run(ReplyOnError.java:54)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:181)
2007-10-18 08:38:05,244 [[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'] DEBUG org.springframework.ejb.access.SimpleRemoteStatelessSessionProxyFactoryBean - Could not connect to remote EJB [com.gfs.corp.component.price.customerbid.PCBMaint] - retrying
org.springframework.remoting.RemoteConnectFailureException: Could not connect to remote service [com.gfs.corp.component.price.customerbid.PCBMaint]; nested exception is weblogic.rjvm.PeerGoneException: ; nested exception is:
java.rmi.UnmarshalException: Incoming message header or abbreviation processing failed ; nested exception is:
java.io.WriteAbortedException: writing aborted; java.io.NotSerializableException: weblogic.jndi.internal.ApplicationNamingNode
thank you -
Need Help In Solving Positioning Problem
Hi Guys,
I have a 3 X 3 grid of JLabels of images. I constructed the grid using the grid layout.
I would like to move a round object which represents a car and place that object in a particular cell. So the grid will be like a background.
My questions are these:
1) How can i position this object in a specific cell based on the rows and column values? for instance if i want to put the object in [1][0].
2) How do i move this object to a different cell using the rows and column values. for instance if i want to move the object in [1][0] to [2][1]
Thank you all for your helpThis question has nothing to do with Java 2D. I've removed the second thread you started in that forum.
Thank you for providing a link to this thread in the cross post.
db
kap wrote:
Hi Guys,
I have posted a question in the Java Programming forum. This is the link :
[positioning object|http://forums.sun.com/thread.jspa?threadID=5447680&tstart=0]
I added the link to avoid double posts
I am asking if someone can help me out because i need an urgent help. Some people have giving some ideas but i don't understand what they mean.
Need help in solving it.
Thanks.
Edited by: kap on Aug 14, 2010 6:59 PM -
Need help with premiere pro cs6 having performance issues please help
need help with premiere pro cs6 having performance issues please help
Welcome to the forum.
First thing that I would do would be to look at this Adobe KB Article to see if it helps.
Next, I would try the tips in this ARTICLE.
If that does not help, a Repair Install would definitely be in order.
Good luck,
Hunt -
Need help to solve update querry for multiple records.
Could any of you please provide update querry for the following scenario.
Requiremnt:
1. Update the UNIQUE_ID of record ( same Identifier and Identifier_code
where END_Date is not null) with the UNIQUE_ID of the record (( same Identifier and Identifier_code
where END_Date is null).
2. If More than one NULL in END_date then update UNIQUE_ID with max(EFFective_Date) of UNIQUE_ID
Source data
UNIQUE_ID
Identifier
Identifier_code
EFFective_Date
END_Date
1
777
abc
2/14/2014 11:15
2/28/2014 9:00
1
777
abc
2/21/2014 9:00
3/7/2014 9:02
2
777
abc
2/28/2014 9:00
3/14/2014 9:02
2
777
abc
3/7/2014 9:02
3/14/2014 9:02
2
777
abc
3/14/2014 9:02
NULL
5
888
xyz
2/14/2014 11:15
2/28/2014 9:00
5
888
xyz
2/21/2014 9:00
3/7/2014 9:02
5
888
xyz
2/28/2014 9:00
3/14/2014 9:02
6
888
xyz
3/7/2014 9:02
NULL
7
888
xyz
3/14/2014 9:02
NULL
OutPUT .
UNIQUE_ID
Identifier
Identifier_code
EFFective_Date
END_Date
2
777
abc
2/14/2014 11:15
2/28/2014 9:00
2
777
abc
2/21/2014 9:00
3/7/2014 9:02
2
777
abc
2/28/2014 9:00
3/14/2014 9:02
2
777
abc
3/7/2014 9:02
3/14/2014 9:02
2
777
abc
3/14/2014 9:02
NULL
7
888
xyz
2/14/2014 11:15
2/28/2014 9:00
7
888
xyz
2/21/2014 9:00
3/7/2014 9:02
7
888
xyz
2/28/2014 9:00
3/14/2014 9:02
7
888
xyz
3/7/2014 9:02
NULL
7
888
xyz
3/14/2014 9:02
NULL
Thanks in advance.Hi Vikash,
This query will not produce results as per requirement:
Try it with following data
Insert into @TempTABLE values (1,777,'abc','2/14/2014 11:15','3/14/2014 9:02')
Insert into @TempTABLE values (1,777,'abc','2/21/2014 9:00','3/14/2014 9:02')
Insert into @TempTABLE values (2,777,'abc','2/28/2014 9:00','3/14/2014 9:02')
Insert into @TempTABLE values (2,777,'abc','3/7/2014 9:02','3/14/2014 9:02')
Insert into @TempTABLE values (2,777,'abc','3/14/2014 9:02',NULL)
Insert into @TempTABLE values (5,888,'xyz','2/14/2014 11:15','3/14/2014 9:02')
Insert into @TempTABLE values (5,888,'xyz','2/21/2014 9:00','3/14/2014 9:02')
Insert into @TempTABLE values (5,888,'xyz','2/28/2014 9:00','3/14/2014 9:02')
Insert into @TempTABLE values (7,888,'xyz','3/7/2014 9:02',NULL)
Insert into @TempTABLE values (6,888,'xyz','3/14/2014 9:02',NULL)
as per the problem statement, all records having 888,'xyz' should be updated with 6 not 7 as max effective date is associated with 6 not 7.
Ashutosh
Nope.
can you check the original post first. It clearly states output as having 7 as id for all the records with 888,xyz
also your above posted sample data is different from original sample data as you've dates jumpled up for the records with ids 6 and 7
Please see the illustration for original sample data
--sample table for illustration
declare @t table
(UNIQUE_ID int,Identifier int,Identifier_code varchar(100),EFFective_Date datetime ,END_Date datetime)
--populate original sample data
INSERT @t ([UNIQUE_ID], [Identifier], [Identifier_code], [EFFective_Date], [END_Date]) VALUES (1, 777, N'abc', CAST(0x0000A2D200B964F0 AS DateTime), CAST(0x0000A2E0009450C0 AS DateTime))
INSERT @t ([UNIQUE_ID], [Identifier], [Identifier_code], [EFFective_Date], [END_Date]) VALUES (1, 777, N'abc', CAST(0x0000A2D9009450C0 AS DateTime), CAST(0x0000A2E70094DD60 AS DateTime))
INSERT @t ([UNIQUE_ID], [Identifier], [Identifier_code], [EFFective_Date], [END_Date]) VALUES (2, 777, N'abc', CAST(0x0000A2E0009450C0 AS DateTime), CAST(0x0000A2EE0094DD60 AS DateTime))
INSERT @t ([UNIQUE_ID], [Identifier], [Identifier_code], [EFFective_Date], [END_Date]) VALUES (2, 777, N'abc', CAST(0x0000A2E70094DD60 AS DateTime), CAST(0x0000A2EE0094DD60 AS DateTime))
INSERT @t ([UNIQUE_ID], [Identifier], [Identifier_code], [EFFective_Date], [END_Date]) VALUES (2, 777, N'abc', CAST(0x0000A2EE0094DD60 AS DateTime), NULL)
INSERT @t ([UNIQUE_ID], [Identifier], [Identifier_code], [EFFective_Date], [END_Date]) VALUES (5, 888, N'xyz', CAST(0x0000A2D200B964F0 AS DateTime), CAST(0x0000A2E0009450C0 AS DateTime))
INSERT @t ([UNIQUE_ID], [Identifier], [Identifier_code], [EFFective_Date], [END_Date]) VALUES (5, 888, N'xyz', CAST(0x0000A2D9009450C0 AS DateTime), CAST(0x0000A2E70094DD60 AS DateTime))
INSERT @t ([UNIQUE_ID], [Identifier], [Identifier_code], [EFFective_Date], [END_Date]) VALUES (5, 888, N'xyz', CAST(0x0000A2E0009450C0 AS DateTime), CAST(0x0000A2EE0094DD60 AS DateTime))
INSERT @t ([UNIQUE_ID], [Identifier], [Identifier_code], [EFFective_Date], [END_Date]) VALUES (6, 888, N'xyz', CAST(0x0000A2E70094DD60 AS DateTime), NULL)
INSERT @t ([UNIQUE_ID], [Identifier], [Identifier_code], [EFFective_Date], [END_Date]) VALUES (7, 888, N'xyz', CAST(0x0000A2EE0094DD60 AS DateTime), NULL)
--do the update
UPDATE t
SET UNIQUE_ID = MaxID
FROM
SELECT MAX(CASE WHEN END_DATE IS NULL THEN UNIQUE_ID END) OVER (PARTITION BY Identifier,Identifier_code) AS MaxID,UNIQUE_ID
FROM @t
)t
WHERE UNIQUE_ID <> MaxID
AND MaxID IS NOT NULL
--now check the output
SELECT * FROM @t
The output is as below
UNIQUE_ID Identifier Identifier_code EFFective_Date END_Date
2 777 abc 2014-02-14 11:15:00.000 2014-02-28 09:00:00.000
2 777 abc 2014-02-21 09:00:00.000 2014-03-07 09:02:00.000
2 777 abc 2014-02-28 09:00:00.000 2014-03-14 09:02:00.000
2 777 abc 2014-03-07 09:02:00.000 2014-03-14 09:02:00.000
2 777 abc 2014-03-14 09:02:00.000 NULL
7 888 xyz 2014-02-14 11:15:00.000 2014-02-28 09:00:00.000
7 888 xyz 2014-02-21 09:00:00.000 2014-03-07 09:02:00.000
7 888 xyz 2014-02-28 09:00:00.000 2014-03-14 09:02:00.000
7 888 xyz 2014-03-07 09:02:00.000 NULL
7 888 xyz 2014-03-14 09:02:00.000 NULL
Now compare it with original output and you'll find they're the same
UNIQUE_ID Identifier Identifier_code EFFective_Date END_Date
2 777 abc 2/14/2014 11:15 2/28/2014 9:00
2 777 abc 2/21/2014 9:00 3/7/2014 9:02
2 777 abc 2/28/2014 9:00 3/14/2014 9:02
2 777 abc 3/7/2014 9:02 3/14/2014 9:02
2 777 abc 3/14/2014 9:02 NULL
7 888 xyz 2/14/2014 11:15 2/28/2014 9:00
7 888 xyz 2/21/2014 9:00 3/7/2014 9:02
7 888 xyz 2/28/2014 9:00 3/14/2014 9:02
7 888 xyz 3/7/2014 9:02 NULL
7 888 xyz 3/14/2014 9:02 NULL
Please Mark This As Answer if it helps to solve the issue Visakh ---------------------------- http://visakhm.blogspot.com/ https://www.facebook.com/VmBlogs -
I NEED HELP TO SOLVE MY SANDY BRIDGE CHIPSET ISSUE !!!
Hi,
I need help from somebody to receive the updated part for my Pavilion Dv7 4290us !!!.
This is one of the machines affected by the Sandy Bridge issue, I checked many times...
I already registered the Laptop
Thanks in advance
Manuel Ramirez
This question was solved.
View Solution.The product number of your laptop is XZ037UA#ABA (Here ABA means this particular model was sold in US only) . Where was this laptop purchased exactly and Where are you currently located?
HP provides a global warranty and ideally this should be covered at no additional cost. You can find more info at below link
http://h10025.www1.hp.com/ewfrf/wc/document?docname=bpr01266&cc=us&dlc=en&lc=en&jumpid=reg_R1002_USE...
//Click on Kudos and Accept as Solution if my reply was helpful and answered your question//
I am an HP employee!! -
Spry Menu Bar issue, NEED HELP...???
Here is the coding for a menu bar that i created with CS3, for some reason i am having an issue when i open the web page in IE, on firefox and safari it looks fine, the menu drops down to sub menu's fine, but for some reason when i open it in IE, the submenu's show on the very top of the page rather than right below the menu itself, please check my coding and see if there is an issue???
i ran compatability and there are no issues shown.
@charset "UTF-8";
/* SpryMenuBarHorizontal.css - Revision: Spry Preview Release 1.4 */
/* Copyright (c) 2006. Adobe Systems Incorporated. All rights reserved. */
LAYOUT INFORMATION: describes box model, positioning, z-order
/* The outermost container of the Menu Bar, an auto width box with no margin or padding */
ul.MenuBarHorizontal
margin: 0;
padding: 0;
list-style-type: none;
font-size: 100%;
cursor: default;
width: auto;
/* Set the active Menu Bar with this class, currently setting z-index to accomodate IE rendering bug: http://therealcrisp.xs4all.nl/meuk/IE-zindexbug.html */
ul.MenuBarActive
z-index: 1000;
/* Menu item containers, position children relative to this container and are a fixed width */
ul.MenuBarHorizontal li
margin: 0;
padding: 0;
list-style-type: none;
font-size: 100%;
position: relative;
text-align: left;
cursor: pointer;
width: 10.4em;
float: left;
background-image: url(tab2.png);
/* Submenus should appear below their parent (top: 0) with a higher z-index, but they are initially off the left side of the screen (-1000em) */
ul.MenuBarHorizontal ul
margin: 0;
padding: 0;
list-style-type: none;
font-size: 100%;
z-index: 1020;
cursor: default;
width: 8.2em;
position: absolute;
left: -1000em;
text-decoration: underline;
/* Submenu that is showing with class designation MenuBarSubmenuVisible, we set left to auto so it comes onto the screen below its parent menu item */
ul.MenuBarHorizontal ul.MenuBarSubmenuVisible
left: auto;
background-image: url(../tab1.png);
/* Menu item containers are same fixed width as parent */
ul.MenuBarHorizontal ul li
width: 8.2em;
/* Submenus should appear slightly overlapping to the right (95%) and up (-5%) */
ul.MenuBarHorizontal ul ul
position: absolute;
margin: -5% 0 0 95%;
/* Submenu that is showing with class designation MenuBarSubmenuVisible, we set left to 0 so it comes onto the screen */
ul.MenuBarHorizontal ul.MenuBarSubmenuVisible ul.MenuBarSubmenuVisible
left: auto;
top: 0;
DESIGN INFORMATION: describes color scheme, borders, fonts
/* Submenu containers have borders on all sides */
ul.MenuBarHorizontal ul
/* Menu items are a light gray block with padding and no text decoration */
ul.MenuBarHorizontal a
display: block;
cursor: default;
padding: 0.5em 0.75em;
color: #FFFFFF;
text-decoration: none;
border-left-color: #0063bd;
border-right-color: #0063bd;
border-right-width: 3px;
border-left-width: thin;
font-family: Calibri;
font-weight: bold;
font-size: 19px;
/* Menu items that have mouse over or focus have a blue background and white text */
ul.MenuBarHorizontal a:hover, ul.MenuBarHorizontal a:focus
color: #000000;
/* Menu items that are open with submenus are set to MenuBarItemHover with a blue background and white text */
ul.MenuBarHorizontal a.MenuBarItemHover, ul.MenuBarHorizontal a.MenuBarItemSubmenuHover, ul.MenuBarHorizontal a.MenuBarSubmenuVisible
color: #000000;
SUBMENU INDICATION: styles if there is a submenu under a given menu item
/* Menu items that have a submenu have the class designation MenuBarItemSubmenu and are set to use a background image positioned on the far left (95%) and centered vertically (50%) */
ul.MenuBarHorizontal a.MenuBarItemSubmenu
background-image: url(SpryMenuBarDown.gif);
background-repeat: no-repeat;
background-position: 95% 50%;
/* Menu items that have a submenu have the class designation MenuBarItemSubmenu and are set to use a background image positioned on the far left (95%) and centered vertically (50%) */
ul.MenuBarHorizontal ul a.MenuBarItemSubmenu
background-image: url(SpryMenuBarRight.gif);
background-repeat: no-repeat;
background-position: 95% 50%;
/* Menu items that are open with submenus have the class designation MenuBarItemSubmenuHover and are set to use a "hover" background image positioned on the far left (95%) and centered vertically (50%) */
ul.MenuBarHorizontal a.MenuBarItemSubmenuHover
background-image: url(SpryMenuBarDownHover.gif);
background-repeat: no-repeat;
background-position: 95% 50%;
/* Menu items that are open with submenus have the class designation MenuBarItemSubmenuHover and are set to use a "hover" background image positioned on the far left (95%) and centered vertically (50%) */
ul.MenuBarHorizontal ul a.MenuBarItemSubmenuHover
background-image: url(SpryMenuBarRightHover.gif);
background-repeat: no-repeat;
background-position: 95% 50%;
BROWSER HACKS: the hacks below should not be changed unless you are an expert
/* HACK FOR IE: to make sure the sub menus show above form controls, we underlay each submenu with an iframe */
ul.MenuBarHorizontal iframe
position: absolute;
z-index: 1010;
/* HACK FOR IE: to stabilize appearance of menu items; the slash in float is to keep IE 5.0 from parsing */
@media screen, projection
ul.MenuBarHorizontal li.MenuBarItemIE
display: inline-block;
f\loat: left;
position: relative;Hey gramps, thanks for the info, i have updated my spry framework to 1.6.1 but the problem is still the same, i recreated my menu with the new 1.6 and it still doing the same thing, the submenu's are like vertically reversed... ugh need help.
here the new code
@charset "UTF-8";
/* SpryMenuBarHorizontal.css - version 0.6 - Spry Pre-Release 1.6.1 */
/* Copyright (c) 2006. Adobe Systems Incorporated. All rights reserved. */
LAYOUT INFORMATION: describes box model, positioning, z-order
/* The outermost container of the Menu Bar, an auto width box with no margin or padding */
ul.MenuBarHorizontal
margin: 0;
padding: 0;
list-style-type: none;
font-size: 100%;
cursor: default;
width: auto;
/* Set the active Menu Bar with this class, currently setting z-index to accomodate IE rendering bug: http://therealcrisp.xs4all.nl/meuk/IE-zindexbug.html */
ul.MenuBarActive
z-index: 1000;
/* Menu item containers, position children relative to this container and are a fixed width */
ul.MenuBarHorizontal li
margin: 0;
padding: 0;
list-style-type: none;
font-size: 100%;
position: relative;
text-align: left;
cursor: pointer;
width: 10.4em;
float: left;
/* Submenus should appear below their parent (top: 0) with a higher z-index, but they are initially off the left side of the screen (-1000em) */
ul.MenuBarHorizontal ul
margin: 0;
padding: 0;
list-style-type: none;
font-size: 100%;
z-index: 1020;
cursor: default;
width: 8.2em;
position: absolute;
left: -1000em;
/* Submenu that is showing with class designation MenuBarSubmenuVisible, we set left to auto so it comes onto the screen below its parent menu item */
ul.MenuBarHorizontal ul.MenuBarSubmenuVisible
left: auto;
background-image: url(../tab1.png);
line-height: 18px;
/* Menu item containers are same fixed width as parent */
ul.MenuBarHorizontal ul li
width: 8.2em;
/* Submenus should appear slightly overlapping to the right (95%) and up (-5%) */
ul.MenuBarHorizontal ul ul
position: absolute;
margin: -5% 0 0 95%;
/* Submenu that is showing with class designation MenuBarSubmenuVisible, we set left to 0 so it comes onto the screen */
ul.MenuBarHorizontal ul.MenuBarSubmenuVisible ul.MenuBarSubmenuVisible
left: auto;
top: 0;
DESIGN INFORMATION: describes color scheme, borders, fonts
/* Submenu containers have borders on all sides */
ul.MenuBarHorizontal ul
border: 1px solid #CCC;
/* Menu items are a light gray block with padding and no text decoration */
ul.MenuBarHorizontal a
display: block;
cursor: pointer;
padding: 0.5em 0.75em;
color: #FFFFFF;
text-decoration: none;
font-size: 19px;
font-family: Calibri;
font-weight: bolder;
/* Menu items that have mouse over or focus have a blue background and white text */
ul.MenuBarHorizontal a:hover, ul.MenuBarHorizontal a:focus
color: #000000;
/* Menu items that are open with submenus are set to MenuBarItemHover with a blue background and white text */
ul.MenuBarHorizontal a.MenuBarItemHover, ul.MenuBarHorizontal a.MenuBarItemSubmenuHover, ul.MenuBarHorizontal a.MenuBarSubmenuVisible
color: #000000;
SUBMENU INDICATION: styles if there is a submenu under a given menu item
/* Menu items that have a submenu have the class designation MenuBarItemSubmenu and are set to use a background image positioned on the far left (95%) and centered vertically (50%) */
ul.MenuBarHorizontal a.MenuBarItemSubmenu
background-repeat: no-repeat;
background-position: 95% 50%;
/* Menu items that have a submenu have the class designation MenuBarItemSubmenu and are set to use a background image positioned on the far left (95%) and centered vertically (50%) */
ul.MenuBarHorizontal ul a.MenuBarItemSubmenu
background-repeat: no-repeat;
background-position: 95% 50%;
/* Menu items that are open with submenus have the class designation MenuBarItemSubmenuHover and are set to use a "hover" background image positioned on the far left (95%) and centered vertically (50%) */
ul.MenuBarHorizontal a.MenuBarItemSubmenuHover
background-repeat: no-repeat;
background-position: 95% 50%;
/* Menu items that are open with submenus have the class designation MenuBarItemSubmenuHover and are set to use a "hover" background image positioned on the far left (95%) and centered vertically (50%) */
ul.MenuBarHorizontal ul a.MenuBarItemSubmenuHover
background-repeat: no-repeat;
background-position: 95% 50%;
BROWSER HACKS: the hacks below should not be changed unless you are an expert
/* HACK FOR IE: to make sure the sub menus show above form controls, we underlay each submenu with an iframe */
ul.MenuBarHorizontal iframe
position: absolute;
z-index: 1010;
/* HACK FOR IE: to stabilize appearance of menu items; the slash in float is to keep IE 5.0 from parsing */
@media screen, projection
ul.MenuBarHorizontal li.MenuBarItemIE
display: inline;
f\loat: left; -
Concurrent crystal license timeout Issue, need help.
Hi,
My company is using crystal enterprise 10 with 18 concurrent user license.
However, we often hit out of crystal license issues.
Does time to wait for exporting crystal reports to excel/pdf takes up licenses?
Does time to wait for crystal report to be printed or viewed on the web browser takes up licenses?
We all know that user sessions take up user licenses. 1 user login take up 1 license.
Does crystal pruning job takes up user licenses too?
Need help urgently, much appreciated.Hi Daren,
Support on Cystal Enterprise 10 has expired. Make sure that your users are actually logging off and not just closing their browser.
One user can take up multiple licenses by not logging off or opening multiple browsers to view multiple reports. Scheduled jobs that are running do not take up license, but a user veiwing a historical instance does take up a license.
In your metrics tab in the Cyrsatl Management Console -> Servers-> cms you should be able to see the active number of sessions- system connections are backend connections between the servers and these do not take up any licenses.
Best Regards,
Jadie -
T400 LCD dim issue - Need help!!
I'm having a LCD dim issue with a T400. Have changed the LCD panel, LCD cable and systemboard but still having same issue. If i removed the lcd card, then the display is working fine. I've tested the lcd card in another working unit and it's working as well (means the lcd card is working). I use a working lcd card and plug into this T400 but LCD still dim.
I've try to switch the problematic lcd cable and lcd panel to a working systemboard and it kills the systemboard. Have try to switch a few things but still unable to find the root cause. Urgently need help on this. Any advice will be appreciated.
Model : 6475-RM5hey bhoh
i suggest uninstalling your current graphic card driver, let windows install its own generic drivers and see if that makes any difference
WW Social Media
Important Note: If you need help, post your question in the forum, and include your system type, model number and OS. Do not post your serial number.
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!
Follow @LenovoForums on Twitter!
Have you checked out the Community Knowledgebase yet?!
How to send a private message? --> Check out this article. -
LCD monitor display issue, need help
I have a strange problem with my LCD display, it goes like this:
When I first boot up the mac and the wallpaper appears on the display the image looks perfect, all the tones are right etc, but as the startup progresses, programs loading etc, the display changes suddenly, becomes too bright in the highs, too dark in the lows, and over-saturated in between. Its looks horrible.
I have just discovered that I can correct the issue by going into system prefs, display, selecting the options tab (next to Display and Color) and turning overscan on, then back off, voila, all fixed.
Looks great.
Thing is I have to do this every time now that I start the computer, and Im wondering if anyone knows what causes this issue and if theres anything I can do as a more robust solution.
The kicker is I have the same problem with a viewsonic LCD on my secondary machine (Powermac G5, Osx 10.4), right at the beginning of startup it looks great then suddenly all goes wrong, too dark/light over-saturated. Its as if the image has been blended with itself in multiply mode a la photoshop.
And on my second machine there is no option for overscan so I cant use my quick fix.
Is overscan a feature of the OS or the monitor?
The worst part is I need these displays to work correctly because Im a graphic designer, I need my colors to look right so I can do my job, and while I could go buy a $1000 monitor its not possible atm, and Id kinda like to know why this problem occurs. So if I do buy a different I can be assured the problem wont rear its ugly head again. But I dont think the problme is the monitor. I think its something to do with the communication between the display and the computer.
The monitor can display correctly, and does for a brief moment, then it all goes very wrong. Ive spoken to NEC and they werent much help but Ill be trying them again today too.
But again, I thinks its the computer, not the monitors as I can reproduce the issue swapping out monitors.
I hope Ive described it adequately,
Thanks in advance for any help forthcoming, this is very frustrating and is causing me endless headaches.Mattdp,
I am currently having the same problem with my 20" cinema display. Did you ever find a long term solution? Apple states that the PowerMac G5 is legacy with no support available, and suggested a reset the PRAM. I did so to no avail. I too have 10.4.11 and thus no "overscan" to turn off. This is my wife's primary computer for her photography business, and the color issue needs to be resolved as quickly as I can find the answer.
Is there a possible solution through the terminal?
Rick
Maybe you are looking for
-
Display Issues on Early 2011 Macbook Pro
I am currently experiencing an undocumented problem for my 15 inch Macbook Pro (Early 2011 Version), and was hoping to get some help diagnosing what the issue might be. Lately, it seems that whenever I am doing anything that is computationally expens
-
Drill down is giving an error in Bex analyser.
hi friends, when iam using the bex analyser, the repoort will open in a short time. And all the free characteristics are works fine. But one of the free char(company code) is not able to giving the drill down, insted it is getting the following error
-
Hi! I need help! I created an imovie and then shared it and cannot go back in and edit the roigianl now. I am new to Imovie and am trying to figure this out quickly as i have to get this done by tonight. Thank you
-
I want to record simultaneously encoder, pressure and other AI signals and output a TTL signal for every other pressure signal. I have two VIs: One is to record all signals and the other is to generate TTL signals. 1. Since I'm new to Labview, I woul
-
Where is a datasource Defined in Jdev9i?
I have a project in jdev9i, and for this project a datasource is defined for MSSqlserver jdbc driver I need the xml file containing this datasource? Thank you data-source 'jdbc/sqlserver-prjLRS520CoreDS': DriverManagerDataSource driver 'com.microsoft