Having Multiple Issues with the 3.0 firmware update.

Just thought I would share a copy of my feedback here to see if anyone else is having some of the 5 issues I am having since I upgraded. I have been "using" (more like fighting with) the 3.0 update since its release. Here is what I sent to apple (most of it):
+I purchased the 3.0 update almost the day it was released. I have now used my iPod Touch a couple of months and I must say that there are some serious issues that need to be addressed, and soon. And a google search seems to show I am not the only one with problems, including those listed in your very own forums. So in order to make sure that I go through proper channels, I will list them here:+
+1) WiFi Connectivity. Since the upgrade, my iPod drops wifi connections for no apparent reason. Wifi says its connected and can't access pages. It seems to turn on/off randomly, even when I am only 5 feet from the router. I have followed directions for resetting the network, restarting my router, wiping the iPod and even did a complete restore of the 3.0 firmware. Still the same issues. These were not issues in version 2.2.1.+
+2) YouTube (or more aptly the application that plays YouTube videos) keeps hanging up. The progress bar that shows how much of the video has been buffered will go somewhere between 30 and 75 percent complete, then hang. the video will play to that point and stop. In order to get past that point I have to close the video app and reload the clip, then I have to move the location "dot" to where it stopped so it will buffer from there. If I do not move it, guess what, it stops at the same exact frame the second time around. Also the buffer progress moves forward, and then sometimes jumps all the way back for no reason. This was not an issue in 2.2.1.+
+3) Screen rotation seems to only work about 2/3 of the time. Sometimes in Safari, I will rotate the screen and it will still say where it was and my only remedy is to restart Safari.+
+4) Battery life is shorter. Now I know the batteries wear out over time, but a 30% decrease in battery life since the very day I installed the update is not coincidence. I have disabled push applications and even wifi, and still have a decrease in battery life with no change in use. Again, this was not an issue in 2.2.1+
+5) System hang-ups. Even with just the apps that come with the iPod (no 3rd party apps from App Store) I still get system locks that force me to power off the ipod and restart it. Even with almost all my ipod full of App Store apps and audio/video I did not have this problem in 2.2.1+
+I have read the forums, tried the apple posted fixes and still have not seen any of these problems resolved. My frustrations with the iPod Touch 3.0 upgrade have left me with a sour Apple taste in my mouth.+
+To be very honest, I am a PC person. Many have tried to convert me to Apple. The iPod was a business tool so I could carry videos with me to show prospective clients what I could do, even make an impromptu demonstration. I refuse to use AT&T as a carrier, so an iPhone was out of the question. Up until 3.0 I was quite happy with my iPod, now it is left home on my desk more than in a pouch next to my cell phone. After all the hype about Apple being so much better than a PC for reliability, service and stability, I cannot say that I am very impressed. It may be a long while before I try another Apple product.+

+1) WiFi Connectivity. Since the upgrade, my iPod drops wifi connections for no apparent reason. Wifi says its connected and can't access pages. It seems to turn on/off randomly, even when I am only 5 feet from the router. I have followed directions for resetting the network, restarting my router, wiping the iPod and even did a complete restore of the 3.0 firmware. Still the same issues. These were not issues in version 2.2.1.+
You probably did everything except upgrading your router or your router firmware. 3.0 is very sensitive to outdated router firmware and will exhibit the problems you have experienced.
+2) YouTube (or more aptly the application that plays YouTube videos) keeps hanging up...
See #1. YouTube functionality is highly dependent on WiFi connectivity.
+3) Screen rotation seems to only work about 2/3 of the time. Sometimes in Safari, I will rotate the screen and it will still say where it was and my only remedy is to restart Safari.+
Mine has done this a few times as well. A restart or reset usually corrects the problem.
+4) Battery life is shorter. Now I know the batteries wear out over time, but a 30% decrease in battery life since the very day I installed the update is not coincidence. I have disabled push applications and even wifi, and still have a decrease in battery life with no change in use. Again, this was not an issue in 2.2.1+
There have been sporadic problems reported but I have never experienced anything like this. Restoring the iPod as new will rule out software issues.
+5) System hang-ups. Even with just the apps that come with the iPod (no 3rd party apps from App Store) I still get system locks that force me to power off the ipod and restart it. Even with almost all my ipod full of App Store apps and audio/video I did not have this problem in 2.2.1+
Again, a restore as new will correct 99+ percent of these. You can always force kill an app by holding down the Home button until you return to the home screen. This will keep you from having to restart.
+I have read the forums, tried the apple posted fixes and still have not seen any of these problems resolved. My frustrations with the iPod Touch 3.0 upgrade have left me with a sour Apple taste in my mouth.+
Apple doesn't post fixes except in the Tech Library. Search Support and you will find lots of helpful articles to correct issues.
+To be very honest, I am a PC person. Many have tried to convert me to Apple. The iPod was a business tool so I could carry videos with me to show prospective clients what I could do, even make an impromptu demonstration. I refuse to use AT&T as a carrier, so an iPhone was out of the question. Up until 3.0 I was quite happy with my iPod, now it is left home on my desk more than in a pouch next to my cell phone. After all the hype about Apple being so much better than a PC for reliability, service and stability, I cannot say that I am very impressed. It may be a long while before I try another Apple product.+
This is really too bad. I've used PCs for years and really never have suffered too badly from the experience - but I'm a fanatic about keeping my OS updated, virus scans current, and firewalls working. And throw in malware scans as well. I've also found most users don't have a clue how to keep their PCs "clean".
A year and a half ago, I bought an iMac and could not be happier and less worried about all of the potential PC threats out there.

Similar Messages

  • Having an issue with the latest Indesign CC update and Easy Catalog plugin.

    After the latest CC update I had this strange behavior start occuring. I have multiple pages that load in data and images via Easy Catalog, I've been using the same pages for years without any issues, within the past couple days I've noticed that now, when I run "Update Easy Catalog Fields" on a book all of the images get loaded in at about 25% of their size. If I instead run "Update Document" on a single file it loads in correctly. Any one else having similar issues?
    Indesign CC 9.1 x 64
    Thanks

    Have you contacted Tech Support for 65bit Software, who make Easy Catalog?
    65bit Software Ltd

  • Issues with the 3.1 firmware update.

    Ok, so I i realize that I won't be able to do mms messaging till SEPT 25 (boo at&t), but after installing the 3.1 update NONE of them entioned features even appear.. NO camera icon in the messaging window, no vibrate when moving apps, no tethering, nothing.. what gives?

    justinphilly wrote:
    Ok, so I i realize that I won't be able to do mms messaging till SEPT 25 (boo at&t), but after installing the 3.1 update NONE of them entioned features even appear.. NO camera icon in the messaging window,
    that wont appear until at&t updates their profile to activate MMS... the feature has been there since 3.0 just waiting on at&t to activate it
    no vibrate when moving apps
    that was in the first couple betas i think... looks like it got axed before final
    no tethering, nothing..
    this is up to at&t as well... once they decide how much to charge us for a tiny amount of usage then they will enable this feature via profile update as well.
    be well

  • I am having multiple issues with syncing my iphone calendar and outlook There are often 1 hour time differences in the entries on the 2 devices and sometimes events that have been amended are not updated on iphone I mostly enter items on my laptop

    I am having multiple issues with syncing my iphone calendar and outlook calendar on my laptop
    I mostly enter the original items on my laptop
    There are often 1 hour time differences in the entries on the 2 devices and sometimes events that have been amended are not updated on iphone

    This sounds like an error in Time Zone support. The time zone needs to be the same in Outlook as well as the phone.

  • Just activated BlueAnt S4 with my iPhone4 and having an issue with the Phone Commands

    Just activated BlueAnt S4 with my iPhone4 and having an issue with the Phone Commands - as I have multiple numbers for people (ie: iPhone, Work, Home), is it the BlueAnt that is having the issues or the iPhone? Tried to eliminate info on my partner's contact in with only 2 contact numbers (iPhone, Home) and one or the other is totally screwing up. Seems, from BlueAnt website, that it would be the iPhone contacts...and the guessing begins?!! Anyone else have similar issues when BlueAnt S4 was paired and giving 'Phone Commands'?? Any suggestions would be beneficial as I've spent way too much time on the web looking for a good fix/answer. Thanks.

    On your new phone: Settings>General>Reset>Erase All Content & Settings. Start over, this time using your new ID.

  • Captivate 5.5 Question: We seem to be having an issue with the screen capture piece not recording "e

    Captivate 5.5 Question: We seem to be having an issue with the screen capture piece not recording "everything".
    We're running 5.5 as an administrator on Windows 7 and my co-worker is trying to capture a webinar (GoToMeeting) with Captivate and it is not recording anything in the GTM window, except the last slide. Anyone have this problem or know a fix? Not much is mentioned in the Adobe forums.

    Captivate simply doesn't 'hear' some screen events on certain applications and you just need to resort to doing manual captures at these points.
    I usually set up my manual capture button to be F2 so that I can hit it with my left hand while my right hand is on the mouse navigating through the task.

  • Is anyone having volume issues with the new Iphone 4S?

    Is anyone having volume issues with the new Iphone 4S?

    Yes, the volume on my iPhone 4s will max out without me touching any button or setting.  When opening mail, for instance, the ringer icon will appear and the volume level goes to max volume - and I'm not touching the volume buttons.  It seems to happen randomly, at least I can't identify a pattern, but thankfully it doesn't happen all the time, but at least once a day.  
    Anyone else seen this?

  • Is anyone else having an issue with the iPad not charging if you use it while it's plugged into a power source?  Now that I'm on iOS 7, I either charge or use... Not both.

    Is anyone else having an issue with the iPad not charging if you use it while it's plugged into a power source?  Now that I'm on iOS 7, I either charge or use... Not both.

    No problems here.
    Edit...
    My IOS-7 is on an iPod Touch.

  • Ok, so I have a 1g macbook Pro and I'm having an issue with the graphics card, so I believe.

         I believe I'm having an issue with the graphics card. For one, when I'm using programs like iMovie '11, SPORE, or the Sims 3  for long periods (hours usualy) of time, the computer will be perfectly fine. It gets warmish-hot, like usuall, all of a sudden it will randomly freeze for 5 to 10 seconds, then shut down and reststart. This happens, espically on the Sims 3 I can play for a while, but when I try to save it will shut down on me.
         Also, I got a new iPod touch 4g on the 25th, the first few times I tried syncing and downloading, it started off fine, but after 10 min. it would restart. Now it works ok, but I still monitor it just incase.
         Can anyone help me understand why all of this is happening? I beleve the graphics card isn't good enough, even though it meets the standards for iLife, and The Sims 3. My graphics card is a ATI,RadeonX1600. The laptop has 2 GB RAM runs at 2.16GHz with an Intel Core Duo on OS X Snow Lepard (10.6.8). Thanks everyone.

    Threads are just processes that link together like the threads in these discussions, well, maybe that is a bad example given how disjointed these get
    It looks like you are not pushing the cpu or hard drive enough to cause your behavior.  Not sure what the temperature limit on that cpu is, on the newer models it is around 100-110 °C which is notciabley hot, and the system shutsdown for self protection at the thermal limit.
    You could be hitting a thermal limit causing that behavior...so do you see good behavior at lower load levela on the system?  Does this only happen with when you are under the high graphic loads?
    Trying to zero in on when this occurs to see if we an isolate the problem.

  • Has anyone having an issue with the iphone 6 signal cell strength on Verizon?

    Is anyone having an issue with the iPhone 6 signal on Verizon?

    I'm having the same issue as most of you on this forum. my current OS is 4.3.5 and after a factory reset, the camera started working fine, however, once i done the restore the camera reverted back to the same issue - "the shutter on the screen wont open, and the still/video switch just flashes" - what is more strange is, i have the HP home&biz app installed and this has a camera function and the camera seems to work fine with that, therefore suggesting there is nothing wrong with the hardware and this is a software issue. I'm currently awaiting a member of the Apple support team to call me about this, will keep you posted. BTW - someone suggested, going into Location Services and switching off the camera and apparantly, the issue was resolved for them, unfortunatly, this didn't work for me extremly odd issue indeed!

  • TS1702 Is anyone else having issues with the most recent Facebook update? I updated it yesterday and now it won't open. I have uninstalled and reinstalled the app, but it still fails to open! Any suggestions?

    Is anyone else having issues with the most recent Facebook app update? I updated it on my iPad 2 yesterday, now it will not open app at all. I have restarted iPad, uninstalled app and reinstalled, several times and still it will not work! Any suggestions? I have also closed the append still no results!

    I just started having this yesterday.  It's only happened twice, but it's annoying.  My wife texted me that she was coming home last night, and it showed up immediately on my iPod Touch but not my iPhone. I opened my iPhone and it soon updated.  Worked fine after that.  Then just a moment ago today my wife texted me and the same thing happened.  I heard my iMac and iPod Touch receive the message but it didn't display on my phone until I opened the phone and it showed up again a little bit thereafter.  I suppose I'll send Apple some feedback on this issue.

  • Has anyone had issues with the latest i-tunes update 11.1.4 on Windows Vista

    I downloaded the update on 24th Jan, and when I tried to open i-tunes after that it failed to start and the message was MSVCR80.dll and the window suggested that I remove and re-install i-tunes.
    I did this and then my CD/DVD drive was not recognised. I then decided to go for a system restore prior to the update. When I did this i-tunes worked again but a window opens every 30seconds saying 'Mobile device helper is not working'  At one point I had 116 windows open. Has anyone else had this problem or can offer any advice please? I have an i-pod classic and my system is windows vista which is approx 8yrs old. I have never had any problem with i-tunes updates before.

    Try using these directions on this link: http://support.apple.com/kb/HT1926 or http://support.apple.com/kb/HT1923
    This resolved my issue with the new update on Vista.
    Use the Control Panel to uninstall iTunes and related software components in the following order and then restart your computer:
    iTunes
    Apple Software Update
    Apple Mobile Device Support
    Bonjour
    Apple Application Support (iTunes 9 or later)

  • What's the problem with having multiple users with the same UID?

    I've got three edit systems connected to the SAN using open directory off our server.
    I want all edit systems to have read/write access to everything created. I don't need to protect anything from any of the systems. With all three systems logged on using the same user, I never have to change permissions.
    The other cool thing about this is that Final Cut Pro will let me know if someone else is modifying a project that I have open with the warning:
    “The project "projectName" has been modified externally. If another user is working on it, saving will overwrite their changes. Do you still want to save?”
    This sounds great, right?
    RED FLAG!!!! Apple gives the warning in this article:
    http://docs.info.apple.com/article.html?artnum=302450
    "You should not allow two users with the same UID to access an Xsan volume at the same time."
    So why is it bad to have two (or more) users with the same UID?
    I can see that in some situations it means that you can't prevent people from read/write privileges. But I don't want to restrict privileges.
    What am I missing? With all of these warnings, it seems like if I do this my edit systems could all explode or something. Please help me understand the potential ramifications of having three users have the same UID.

    Hi Russell,
    1) If you have OD set up and "editor" has UID 1111, then when they log in to any machine that's bound to OD as editor, they will get UID 1111. Therefore, there won't be any of these permission errors. This is typically the recommended approach.
    2) I assume you mean "You'd prefer to not using open directory?" Whatever the case, OD isn't mandatory with Xsan -- it's just that with multiple user accounts, managing them centrally tends to be easier. For 3 or 4 accounts and 3 or 4 machines maybe it's no big deal. If you go larger, it could get a lot more complicated. That said, if you set it up such that each machine has the exact same set of users (as you said, Mary = UID 502, Fred = UID 503, William = UID 504), then you can do what you want. Mary can log in from multiple machines at the same time, and in general you won't have permissions problems. Of course, if you try and read and write the same file from multiple workstations at the same time, you will get file locking issues, which will prohibit somebody from successfully writing the file.
    File locking issues are different from general permissions errors. The former basically says "hey, someone else is editing this file. Therefore I won't let you edit it right now... you can read it if you want though." Permissions means somebody saves it, and Xsan thinks you saved it and own the file, when you really don't.
    Quad-Core PMG5, 4 GB RAM, 7800 GT, 1 TB disk.   Mac OS X (10.4.4)  

  • Is anyone having an issue with the hp photosmart premium c310a? I keep getting a "paper jam" error

    I hope someone from hp is monitoring these posts. I am very disappointed with the new photosmart premium eAll-in-one. I just bought this printer in april and recently when printing, an error message "paper jam" will pop up after just printing 1 or 2 pages. I did all the recommended troubleshooting steps hp has online but after printing a couple pages error message comes back. And thats not even the worst part! I called hp tonight 4 TIMES to get this issue resolved because at this point I want a new printer sent to me! I have been hung up on 2 times and then told the other times that I need to talk to a case manager. Guess what? No case manager available to talk about my printer issue!! I spoke to 6 different representatives with NO help to be found. I cannot return to staples store where I bought it because its after the 14 day return policy hp has with staples. That is the MOST STUPIDEST policy I have ever heard of!! If I knew in advance that I could not return this printer to the store I got it from after 14 days have passed, I would have NEVER BOUGHT IT!! I am still waiting for a case manager to call me back so that I can get this thing picked up ad a new one sent to me.

    Try this:
    Apple menu / System Preferences / Network.
    Click Location: and select Edit Locations..
    Click + (plus sign), and enter a name for the new location - anything will do.
    Apply this.

  • Is there anyone having an issue with the apple tv when selecting music from the home screen?

    Is there anyone in the community having an issue playing music from the home screen of the apple tv? When selecting the music app my apple tv restarts. If anyone else is having the same issue and has corrected the problem please share the solution.

    Working fine here, and have not seen any other reports. I would restore your unit
    Apple TV (2nd and 3rd generation): Restoring your Apple TV - Apple Support

Maybe you are looking for

  • How do I save multiple copies of the same photo with different edits

    I want to make several photos (each with different crops and enhancements) from one existing photo and also want to keep my original as is for future edits.. Is there a save as feature or a way to copy paste to different albums.

  • Where are the Windows Drivers?

    Hi, When I run Bootcamp 2.0 And try to partition the drive for Vista bootcamps says..."After you have installed and set up windows, insert your Mac OS X Leopard install disc to install additional drivers and other software for windows." So I went loo

  • How to change name of downloaded file by URLLink.acsm

    When I browser my URLLink.acsm: "http://host:8080/fulfillment/URLLink.acsm?action=...." it download a file named "URLLink.ascm". How can I change that file name to "title.acsm" insteed of "URLLink.ascm"? For example: "ShakespearInLove.acsm". I'm usin

  • Enable/disable second monitor Mavericks - only software solution.

    I am looking for a way to disable a second monitor (plugged into the Display Port of a 2011 Mac mini) without unplugging it. Does anyone know of a software solution? When I am working I like that second monitor for desktop space, but other times (wat

  • What is 2032 error?

    what is 2032 error?