Having one image below another using child index
I'm not too familiar with how I can use the getChildIndex() along with an if statement in a mouse_move event to make sure one image is always above the other or one is always on the bottom
Something like this..?.. (not sure what your intentions are)...
if(this.getChildIndex(childUnderName) < this.getChildIndex(childOverName) ){
// the under one is under
} else {
// the under one is not under
Similar Messages
-
Upgarded to PE 13 - How do I drag an image from one screen to another (using 2 monitors)
upgarded to PE 13 - How do I drag an image from one screen to another (using 2 monitors)
upgarded to PE 13 - How do I drag an image from one screen to another (using 2 monitors)
-
Using the content aware move tool, I want to move an item from one image to another image but it does not seem to work. I think I need two layers on one document so how do I do this
Good day!
A simple Paste does not work for you?
It should place the clipboard content as a new Layer which you can then move around.
If there is any chance that the elements need to be scaled, rotated etc. I would prefer to place them as Smart Objects (File > Place …) and do the masking that is specific to the images themselves in those.
Regards,
Pfaffenbichler -
How do I copy layers from one image to another?
I am editing figures for a journal and I need arrows for multiple images. Is there a standard arrow? I can only see free hand. If I use a free hand arrow I then want to copy it to the other images for consistency. How do I copy or share layers between images?
There are many arrows in the shape tool, or you can set the line tool to have an arrowhead in the tool options. You can copy/paste layers from one image to another, or drag a layer from the layers panel into the main image window of another image and then use the move tool to position it. You can also drag into the thumbnail in the photo bin, but you'll still need to bring the image up to adjust the positioning.
-
How to exchange one image for another with a click
I am brand new to actionscript, so bear with me! I need to create an interactive web-based system which takes the user through steps to assemble something. One of the pages will have images of the tools needed. I want the user to be able to 'tick' off each tool, so that when they click on the image of a specific tool it is replaced by the image faded out and a big red tick over it. essentially it is replacing one image for another when it is clicked on.
any ideas on the actionscript? Sorry i know this must be basic stuff for you!
thanks!your tool images should be converted to movieclips and given instance names and you should create a red tick movieclip that you assign a class, say RedTick. you can then use:
tool1.addEventListener(MouseEvent.CLICK,toolClickF);
function toolClickF(e:MouseEvent):void{
var redtick:RedTick=new RedTick();
addChild(redtick);
redtick.x=e.currentTarget.x;
redtick.y=e.currentTarget.y;
e.currentTarget.alpha=.4; -
If I get a user to enter their name as a variable and I am linking one movie to another using a button, is there a way to carry the user name forward into the second movie?
Hi there
See if the link below helps
Click here
Cheers... Rick
Helpful and Handy Links
Captivate Wish Form/Bug Reporting Form
Adobe Certified Captivate Training
SorcerStone Blog
Captivate eBooks -
How do I superimpose one image over another
How do I super impose one image over another?
Open image A
Open image B
On image B, use one of the selection tools, e.g. selection brush, lasso tool, to select the object which you wish to "superimpose"
Go to Edit menu>copy to put the object on the clipboard
Go back to image A
Go to Edit>paste. The object will be on its own layer
Get the move tool out of the toolbox, and position the object and resize, if indicated -
Replacing colour/texture from one image onto another?
Desperately need some guidance here as this has been driving me nuts....
I want to use the colour and texture from one photo onto my own design. Now, using the rubber stamp tool I am able only to clone a certain area that moves with the cross hair, but how can I clone a section from one photo and use that as a fill to create another design? In other words, clone a colour from one photo as a colour fill for another design?
Even using the colour replace tool and selecting source: image I am left with the colour pallette as the destination and cannot use the colour from the image to paint my new image from it.
Thanks a heapIf I want to copy a single color from one image to another, here's what I'll do:
Create a new rectangle in the source image
With the rectangle selected, use the eyedropper to pick a color from someplace in the source image
Copy the rectangle and paste it in the destination image
Select the object I want to color and use the eyedropper tool to select the color from the copied rectangle
(A layer with rectangles of different colors is sometimes handy for setting up a color scheme and using it consistently.)
You can also create bitmap patterns to use as fills for vector objects. Fireworks comes with quite a few, but it's easy to add your own. Here are a couple of tutorials
http://www.entheosweb.com/fireworks/patterns.asp
http://www.peachpit.com/articles/article.aspx?p=30942&seqNum=4 -
BOPF, how to transfer BOs from one system to another using ZSAPLINK.
Hi,
Is there a ways to transfer the local objects created using BOPF from one system to another using ZSAPLINK?
Thanks and Regards,
Vineet.Hi Deba,
Find the below SAP help doc which may help u...
http://help.sap.com/saphelp_nw70/helpdata/en/12/43074208ae2a38e10000000a1550b0/frameset.htm
Also find the below threads...
Loading data from one cube to another cube.
data copy from infocube to infocube in two different BW systems
Delta when loading from ODS to ODS
reg datamart
Data mart flag
Regards,
KK. -
How do I copy one image onto another image?
How do I copy one image onto another image?
Lots of ways; Use the Place command to place a file in another. Open two files and drag one to the other's window tab, drag an image from bridge onto an open file. Open an image, press ctrl/cmd-A to select all, the ctrl/com-C to copy the image, the ctrl/cmd-V to paste it into another image.
-
How best to copy keywords from one image to another?
Hey everyone,
I can't seem to find a good, obvious way in Bridge CS3 2.1 to copy just the keyword tags from one image to another.
I realize that one possibility is to create a metadata template for the source image and apply that template to the destination image, but this would be a cumbersome & lame workflow IMHO.
I also realize that Bridge allows loading and viewing many images simultaneously, and that the same set of keywords can then be applied en masse. I'm sure many users like this workflow, but I'm not one of them. For one thing, this approach is seriously not future-proof. What if the user goes out and takes more photos that fit into those same keyword-categories that were applied to the image group?
It seems to me that Bridge should allow the user to right-click on the list of applied keywords (at the top of the keywords pane) and see a "copy keywords" command. And then the user should also be able to right-click on an image and see a "paste keywords" command.
Comments appreciated,
Thanks,
BradThere are many arrows in the shape tool, or you can set the line tool to have an arrowhead in the tool options. You can copy/paste layers from one image to another, or drag a layer from the layers panel into the main image window of another image and then use the move tool to position it. You can also drag into the thumbnail in the photo bin, but you'll still need to bring the image up to adjust the positioning.
-
The float all in windows option is grey and not accessible ? How can I copy from one image to another ? Elements 11
You really are not getting this.
"I guess I am still completely shocked that as a parent we can't download something for everyone to use."
Why do you continue to think this although we keep telling you that this is not the case.
You do NOT have to purchase anything twice. You can share the music with as many ipods as you like in your household.
The ipods are designed to sync with your computer regularly. You should have been syncing these other ipods with your computer all along, thus transferring the purchases to your computer where that music can be synced to as many ipods as you like.
Take on of the ipods with the music in it. Open itunes on your computer. Plug in the ipod. Do not sync. Click File>Transfer Purchases This will transfer the purchases from the ipod to the computer. Make sure that you have authorized your account on the computer: here are directions for that. http://support.apple.com/kb/HT1420
Unplug the ipod.
Plug in the other ipod with purchased music. Do not sync. Click File>Transfer Purchases This will transfer purchases from the ipod to the computer.
You can now plug in any of the ipods, select what you want to sync and sync.
Have a look at the manual for the ipod. http://manuals.info.apple.com/en_US/iPod_touch_iOS4_User_Guide.pdf -
Overlay one image over another one.
Hi,
I am trying to overlay one image over another one.
(example ..
First images 1) This will have complete picture like the passport picture with background
Second Image 2) This will have some specific parts(background of above) whitened
Result picture 3) This should have the passport picture with out any background just the person.
Is this possible using intermedia ??
Thanks in advance.dude, not too sure the dept. of homeland security is going to be cool with doing that.
unless you can make me a passport from Guam. -
Can I move photos from one computer to another using Vault?
Can I move photos from one computer to another using Vault? I use an external hard drive as a vault for my Imac and I want to import photos to my Macbook pro. I have aperture 3 on both units. Can I just plug the ext. drive into the laptop and import from the vault?
You can't import from the vault but you can restore that vault onto the MBP. This will restore the complete library that is contained in the vault.
-
How do i transfer music from one ipod to another using itunes
how do i transfer music from one ipod to another using itunes
Welcome to the Apple Community.
There is more than one way, but to get it all on all devices, connect the first device to iTunes and choose to transfer the music from the device from the file menu. Once everything is in iTunes connect the second device, select the device in the device list, navigate to the music tab and check the content you wish to sync, click apply/sync.
Maybe you are looking for
-
How to create master data source for Profit center group in source system
Profit center group information is available in SAP(T-code:kch3). But, I want to have this information in BW too. Can anyone tell me how to create a datasource for Profit center group? And which SAP table is able to feed master data for this informat
-
Can't install or uninstall iTunes in Vista
OK, this is really messed up. I had a corrupted file in iTunes that wouldn't allow it to open. So I tried to download and install it and failed. I tried to uninstall it and then reinstall and failed. So I think I've got a corrupted version of iTu
-
As the title states.... In default settings when opening a pdf with safari and tabbing the page, there is a black bar (menu) on top of the pdf and it allows you to open in ibooks or open with another app.... I've noticed that with some (company) ipad
-
Custom extracor with FM : pb of init
Hi, I create a custom datasource (DELTA update) starting from the structure and the data extracted by a custom SAP R/3 Function Module called ZCRMT_PROCESS_MORE. (This new extractor is used because the standard extractor 0CRM_SERVICE_PROCESS_I is ful
-
Do I need to uninstall Safari before installing Firefox?
I have a Mac running Leopard and an iPad.