Having placed more than one top-level VI in builder, is there a way to programmatically call the second application?

Builder allows for more than one Top-Level VI. The resulting Executable launches both applications at once. If I terminate one application, is there anyway to launch it again programmatically?

You could monitor the names of all the VI's in memory. If the one you want running is not in the list, you can launch it dynamically.
Ben
Ben Rayner
I am currently active on.. MainStream Preppers
Rayner's Ridge is under construction

Similar Messages

Placing more than one images in one container (was: InDesign)

Hi,
I'm new to inDesign. Can anybody help me placing more than one images in one container like rectangle in which I can get coordinates of the different grphics/images with reference to the container not document page.
Thanks and best regards
Sal

I´n not quite sure what you are trying to do but I´m afraid it´s not possible in InDesign. Coordinates are always referencing the page, or actually the origin which is usually on the top-left corner of the page.
If you just want a single frame for multiple images, you could try to use paste into command. Group your images and Edit > Cut. Draw an empty rectange, select it and Edit > Paste Into. Now you have your group of images inside that one frame and they shouls act like one image if you for instance scale your frame....

Activate more than one Aggregation Level

Hello experts,
We use the Integrated Planning and we have more than 80 Aggregation Levels. When the MultiProvider is deactived because of adding a new InfoObject, all our Aggregation Levels are deactivated.
Is there a possibility to activate more than one Aggregation Level at once? Maybe a special report?
Thank you.

Hi,
please check:
[Re: Activate all the Aggregation level of underlying multi provider]
Gregor wrote a small program and posted it to the forum. Please note: There is no support for this tool.
Bye Matthias

Placing More Than One Photo On A Page

Can you add in the scrapbook format more than one photo per page?
I have a friend who wants me to create a DVD for him with over 500 photos, and the only way I can cheat it is by placing two photos together in Photoshop, then putting the large JPG in the stage. It looks pretty hokey, though.
So, I am wondering if there is a setting where you can get two places to insert a photo on to a page, rather than the standard one that they give you.
Any help would be greatly appreciated!

Hi Gail,
Without using 3rd party plug-ins, this feature is not available in iMovie HD. However, using the built-in effect N-Square (under Editing - Video FX), it's possible to have multiple copies of the same photo on screen - this varies from a minimum of 4 up to a maximum of 64. You could then add titles (text) as desired, using one of the supplied titles. However, this works with only the one photo - not with several different photos on screen at the same time, which is my understanding of what you want to do.
For 3rd party plug-ins, try the Slick Volumes available from GeeThree here:
http://www.geethree.com/slick/
Another way to create the effect you are looking for is to use an application like Keynote. Here you can create slides containing various photos and text on a range of backgrounds. These can be exported, then imported to iMovie. Let me know if you need help with this option.
John

Having with more than one clause

Hi
Is posssible to have a query with more than one clause in having condition
Example In my query I have Count , Sum and AVG , I need to use 3 conditions in having, Is It possible ?
Thank you in advance

Hi,
yes, in Having you can also use AND and OR.
with x as (select 1 nr from dual)
select nr
from x
group by nr
having count(*) = 1
and sum(nr) = 1Herald ten Dam
http://htendam.wordpress.com

When I import a cd with more than one artist iTunes separates each individual artist - how do I get it to show the album as a whole rather than individual artist?

When I import a cd with more than one artist itunes shows each artist's song separately and won't group the album as a whole - this is incredibly frustrating something that Windows media player doesn't do. Does anyone have a simple cure for this annoyance?

Generally all you need to do is fill in an appropriate Album Artist. For more details see my article on Grouping Tracks Into Albums, in particular the topic One album, too many covers.
tt2

More than one summary level for a matrix with group

Hello friends at www.oracle.com ,
I have a report where I need to create a summary level for each row and column. In the Report wizard, it works finely, creating the summary for the 1st matrix group level.
However, if I have some extra matrix group levels - that is, a 2nd or a 3rd level -, it seems that Reports doesn't create its summary levels.
How can I create other summary levels at the matrix, outside the inner matrix?
Best regards,
Franklin Goncalves Jr.

Hello petpandian,
I have a little example that intends to demonstrate what I really need. Hope it is clear enough.
(Below you can see the output I am looking for)
..................MONTH/YEAR
CITY REGION 04/2005.....05/2005
AA.....BB......$ 10,00.....$ 15,00
...............$ 11,00.....$ 16,00
Totals for BB: $ 21,00.....$ 31,00
..................MONTH/YEAR
CITY REGION 04/2005.....05/2005
AA.....CC......$ 30,00.....$ 11,00
...............$ 40,00.....$ 15,00
Totals for CC: $ 70,00.....$ 26,00
Totals for AA: $ 91,00.....$ 57,00 <-- Totals separated for each region and month/year.
As you can see, I need a matrix with group(s) around it. 1st group level is the city (AA), and I have its regions BB and CC. After showing BB values, I have BB totals for each month/year. Same applies to CC totals.
However, I expect that these results can be showed for its outside group (in this example, CITY AA), and what I have in return is the sum of all values in a single field:
Totals for CC: $ 70,00.....$ 26,00
Totals for AA:.....................$148,00 <--- The sum of all totals: it's not separated as above.
I think I should have a matrix inside a matrix, so I would have totals for each region, and totals for each city, separating by its regions and month/year.
The only solution I found was to calculate it manually via PL/SQL and inserting it into a temporary table. However, I think it is not the ideal solution because PL/SQL instructions have to handle the totals, something that Reports should do, and that's why I need help.
Your help will be greatly appreciated. Thanks in advance.
Best regards,
Franklin Goncalves Jr.

What is the easiest way to burn imovies onto DVD's. I want to burn more than one movie onto DVD as I create. Can I continue to burn onto the same DVD as the movies are created?

What is the easiest way to burn my imovies onto DVD's? I want to burn movies as I create them and then continue to add more movies to the same DVD as the years go by -- until the DVD is full! Is this possible?

You might also want to post this in the iMovie forum https://discussions.apple.com/community/ilife/imovie

We use an Airport Extreme in my office, which works fine for me. Occasionally we need to have more than one computer running on it, but for some reason it won't connect to the internet. It says we have internet, but won't connect to wifi. What's going on?

I use my computer everyday in our office and have no issue connecting to the internet/wifi, but when my boss comes in and tries to connect it doesn't work. It tells her she has internet, but won't connect to the wifi. We've tried a few different tactics(the basic ones I've seen on here), but nothing seems to be working for us. My computer automatically connects to our wifi.
Just recently the Airport Extreme has started with the blinking amber colored light on the front, which I believe means something is wrong? Can anyone help us figure out what's going on and why we can't get my boss' computer to connect as it should?
Thank you!

Here's an update:
Now the light is not blinking. It's a solid, consistant green. I don't know if it helps to narrow it down or anything, but I just figured I'd mention it.

How can I select more than one bookmark at a time so that I can then open multiple bookmarks -- without the aggravation of going back to the list and selecting and opening each one.

From my dozens of bookmarks, I often would like to open 5 or 6 of them at once -- perhaps a couple of weather reports, a couple of radio stations, a couple of other websites. But I see no way of doing this without laboriously finding a bookmark, selecting it, opening the website, then returning to the bookmarks, finding the second bookmark, selecting it, opening the website, and on and on. Surely there's a way for me to select multiple unrelated bookmarks and open them at the same time. Thanks much for your help. Don

''Actually there is a picture and better explanation in the corresponding History article''
* ''http://kb.mozillazine.org/Viewing_the_browsing_history_-_Firefox ''
Look where this picture is embedded in the article topic [http://kb.mozillazine.org/Viewing_the_browsing_history_-_Firefox#Selecting_history_items Selecting history items]
* http://kb.mozillazine.org/images/Fx3_history_sidebar_selections2.png
Selecting, viewing, and searching the sidebars and library lists is explained in both articles previously mentioned.
Multiple selection is something built-in to a lot of applications and into all browsers, and yes you guessed correctly the favicon it the thing to the left of the bookmark and that is what is is called in all browsers. And if you look at selection you will find that it matches what you asked for, especially if you were to do a search from the search bar on the bookmark or history sidebar. But there is also no problem opening up a single bookmark or history item into a new tab, with either Ctrl+click or Ctrl+Shift+click in the area to the right of the favicon either.
However I would suggest making a change to your configuration options so the the same keyboard shortcut is used from a link and from your bookmarks. See those keyboard shortcuts in the following along with the footnotes just below the table for them in
* http://www.mvps.org/dmcritchie/firefox/keyboard.htm

How can I attach more than one file , whenever I attach more than one and I send it just sits there. If I send just one it goes thru , what am I doing wrong.

I use 1and 1 webmail for e-mail and there isn't a way to addin my webmail acct. what should I do. in "mailto" in FF I selected "other" should I do that or check something else.

How about performing the update IN the database using a stored
procedure?
By using non-database fields on your form to get the
information, you can then call the procedure in the database to
perform the updates. If an error occurs in the procedure you
rollback, if necessary, and send a message or status back to the
form. If it succeeds you might wish to commit and then re-
execute the form's query -- using either the original key values
or the new key values...
null

How can I select more than one song from the search results?

I want to create playlists based on certain words in the song title. For example, I may want to create a playlist of all my songs with LOVE in the title.
Doing the search is easy, but I can't select more than one song at a time. Is there any way in iTunes 12 for Windows to do this? I found an answer in iTunes for Mac, and it basically says to "un-check "Search Entire Library." " but I don't see that option in iTunes for Windows.
Here is the link to that question: how can i select more than one song from drop down search bar
I hope some Windows user can help me out.

Found the "Search Entire Library" option - click on the small (VERY small for my eyesight) down arrow next to the magnifying glass. Also need to select "Filter by: Songs", and then the songs in the main window show the results.
I'm going to leave this up on the board because 1) in case someone else has this question, and 2) I don't know how to delete it anyway.

Page HTML Body Attribute - can there be more than one in this area?

In "Oracle Database Application Express Advanced Tutorials", Release 3.0, B32469-01 on page 10-10, in the section labeled "Create a Call to the disFormItems Function" in step 6........it reads:
//start citation
In the Page HTML Body Attribute, enter the following:
onload="disFormItems(); first_field();"
//stop citation
My questions are:
Can there be more than one "onload" statement?
If yes, how do you string them together?
Assume the second function I want to add is "disFormItems_local()"
Thank you,
Maggie

Okay, I have figured it out, I believe. So, I will provide my own answer in case someone else is looking for this type of situation in the future.
I edited the page definition by adding another function, disFormItems_local(), to the HTML Header Attribute.
Next, I edited the item's HTML Form Element Attributes to call the function, onchange="disFormItems_local()"
Then, I created a call to the disFormItems_local function in the page HTML Body Attribute, onload="disFormItems(); first_field(); disFormItems_local();"
Other stuff that you will need to know is to be found in Chapter 10 page 8, Enabling and Disabling Form Elements of the 3.0 Advanced Tutorials.

FINAL CUT WON'T ON ON MORE THAN ONE COMPUTER ON A NETWORK

I have a Mac Pro, a MacBook Pro, and a Powermac G5 all connected via airport. I am using all three computers to do video editing using Final Cut Studio, but if I try to open Final Cut on more than one computer at a time, I get an error message syaing that there is already an application running on this network with the same serial number. If I disconnect the computer already running Final Cut from the network, then the other computer will open it, but I need them all connected because I am sharing different photo/music/media files between all three computers. I Paid for Final Cut Studio, and I don't see why I can't use it on more than one computer at a time. Is there a way around this without disconnecting them from the network?

I Paid for Final Cut Studio, and I don't see why I can't use it on more than one computer at a time.
Actually you licensed Final Cut Studio and agreed to the license agreement when you installed those programs.
As it states:
"2. Permitted License Uses and Restrictions.
A. Apple Software
This License allows you to install and use one copy of the Apple Software on one Apple-labeled desktop computer and one Apple-labeled laptop
computer so long as both computers are owned and used by you."

Macbook Pro mid 2012 starting to lag when running more than one program.

Firstly mah specs :
Retina, Mid 2012
2.3 GHz Intel Core i7
8gb 1600 MHz DDR3
NVIDIA GeForce GT 650M / Intel HD 4000
OS X 10.8.4 (12E55)
So, i bought this macbook about a year and a month ago and since i bought it everything has run fine, it has always been fast and smooth, until around 2 months ago when it started getting a little laggy in handling more than one program being open. Before this i was able to run Photoshop, Cinema 4D, Second Life and Chrome all at once and recieved no speed decrease what so ever. So i figured that it must just have been a little clogged up maybe, honestly wasnt sure but tried clearing cache, tried freeing up memory with some of the mac memory management tools from the App Store and non of these worked so in the end i backed up what was important and wiped the HD and re installed the OS. Annoyingly i am still having problems, if i have Photoshop open and i am surfing chrome it lags on scrolling web pages or loading links. If i have Second Life open i seem to lag with more than 3 players around me quite badly, even if i put Second Life onto its lowest Graphic Settings i still lag where as before i had this issue i could run it on its highest Graphic Settings and recieve little to no lag what so ever. This happens for most programs that used to run smoothly, if i now open Cinema 4D and try anything else.....the system slows down.
I COULD take this to the apple store and genuis bar and ask them to have a look at it HOWEVER i am back at Uni in 2 weeks and i need the macbook for my studies as i am currently working on a summer project and need it for research, can any of you Mac Wonders out there suggest anything else for me to try. I have checked the HD and it says its not failing and is verified and found no issues with the partition.

First, back up all data immediately, as your boot drive might be failing.
There are a few other possible causes of generalized slow performance that you can rule out easily.
Reset the System Management Controller.
If you have many image or video files on the Desktop with preview icons, move them to another folder.
If applicable, uncheck all boxes in the iCloud preference pane.
Disconnect all non-essential wired peripherals and remove aftermarket expansion cards, if any.
Check your keychains in Keychain Access for excessively duplicated items.
Boot into Recovery mode, launch Disk Utility, and run Repair Disk.
If you're booting from an aftermarket SSD, see whether there's a firmware update for it.
Otherwise, take the steps below when you notice the problem.
Step 1
Launch the Activity Monitor application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Activity Monitor in the icon grid.
Select the CPU tab of the Activity Monitor window.
Select All Processes from the menu in the toolbar, if not already selected.
Click the heading of the % CPU column in the process table to sort the entries by CPU usage. You may have to click it twice to get the highest value at the top. What is it, and what is the process? Also post the values for % User, % System, and % Idle at the bottom of the window.
Select the System Memory tab. What values are shown in the bottom part of the window for Page outs and Swap used?
Next, select the Disk Activity tab. Post the approximate values shown for Reads in/sec and Writes out/sec (not Reads in and Writes out.)
Step 2
If you have more than one user account, you must be logged in as an administrator to carry out this step.
Launch the Console application in the same way you launched Activity Monitor. Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Select the 50 or so most recent entries in the log. Copy them to the Clipboard (command-C). Paste into a reply to this message (command-V). You're looking for entries at the end of the log, not at the beginning.
When posting a log extract, be selective. Don't post more than is requested.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some personal information, such as your name, may appear in the log. Anonymize before posting. That should be easy to do if your extract is not too long.

Having placed more than one top-level VI in builder, is there a way to programmat​ically call the second applicatio​n?

Similar Messages

Maybe you are looking for

Having placed more than one top-level VI in builder, is there a way to programmatically call the second application?