Having private time blocked on published calendars with limited shared data

I need to be able to share calendars in an enterprise environment (all Mac) and be able to have a public calendar that can have private entrees that block out a portion of the day, but the entree data itself is only available to me. How do I create a calendar entry where the rest of the group knows I've blocked that time, but not the reason?
We currently use busysync for the publish/subscribe solution. If obtaining this functionality from OSXS 10.5 (or 10.6) becomes reality, we'll happily consider the product.

Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
Note: If FileVault is enabled in OS X 10.9 or earlier, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of the test.

Similar Messages

TS2972 how many IOS (iPads) can be used at the same time, and as a maximum, with home sharing?

I would like to use multiple iPads at my residence and use home sharing for guests to watch content from my i-tunes, all on the the same network.
what is the maximum number of IOS devices that can used at the same time, and be authorised on the "home sharing" at the same time?

Thanks for a quick response!
Under "Network adapters", here's what I found:
- Broadcom 802.11g Network Adapter
- 1394 Net Adapter
- Marvell Yukon 88E8036 PCI-E Fast Ethernet Controler
Two other wireless USB adapters are the same:
- BLANC Mini Wireless USB adapter

Can't view published calendar with iCal 2.1 on icalx

I have spent several days reading disussions and anything else I could find, but no luck.
I need to publish my boss' calendar online so the rest of our team can view it , up-to-date. We first tried publising it on .Mac:
We were able to view it on and off, specifically from PCs, which is what everyone else is on. Sometimes it would work, other times it would say it can't find the calendar.
I then tried using icalx. I finally got it to work with a "test" calendar from my Powerbook (with iCal 1.5.5 on OS X 10.3.9. Everthing worked fine, the page showed up on iCalX no problem. I then sent my boss the "how to". His calendar is now loaded on iCalx, however it does not work. He is running OS X 10.4, with new iCal.
I then had my sister publish one from my house computer to test it again, on OS X 10.3.9 as well, and it again worked fine.
When i click on the html page in iCalX, it says "Cannot find webpage" when I click on his schedule, but works fine with the other two "Testers" that I already had up.
It seems it is a bug in the new OS X ?
How can I get this to work? Thanks a TON in advance!
Tom

I too had a similar problem. I published a couple of calendars to .Mac, iCalX, and iCalShare (I had iCalShare grab my calendar from iCalX). I wanted to see how my calendars looked from these different servers.
I really liked the look and feel of my calendars on the .Mac server but I could never view these calendars from a Windows machine. I also could never view any of the Calendar from the Mac calendar Library from a Windows machine.
I ended up having iCalX host my calendars.

ICal ignores time zone in published calendar

I'm trying to make a an online calendar that is automatically generated using events from a database.
All events are in the Dutch time zone, so I added a time zone component to the .ics file. When I try to subscribe to the calendar in iCal everything works fine, except for the fact that the time zone information seems to be ignored and all events are displayed 2 hours too late because they are set to UTC/GMT.
This is an example of the generated .ics file:
BEGIN:VCALENDAR
PRODID:-//Example/NONSGML Bennu 0.1//NL
VERSION:2.0
X-WR-CALNAME:Example
X-WR-TIMEZONE: Europe/Amsterdam
CALSCALE:GREGORIAN
BEGIN:VTIMEZONE
TZID:Europe/Amsterdam
LAST-MODIFIED:20060507T112134Z
BEGIN:DAYLIGHT
DTSTART:20060326T010000
TZOFFSETTO:+0200
TZOFFSETFROM:+0000
TZNAME:CEST
END:DAYLIGHT
BEGIN:STANDARD
DTSTART:20061029T030000
TZOFFSETTO:+0100
TZOFFSETFROM:+0200
TZNAME:CET
END:STANDARD
END:VTIMEZONE
BEGIN:VEVENT
UID:tag:example.com\,2006-05-04:/agenda/440
URL:"http://example.com/agenda/440"
SUMMARY;LANGUAGE=NL:example
DESCRIPTION;LANGUAGE=NL:example
CLASS:PUBLIC
DTSTAMP:20060504T174324Z
DTSTART;TZID=Europe/Amsterdam:20060528T110000Z
END:VEVENT
END:VCALENDAR
What am I doing wrong here? Does anybody know an online calendar in a non-standard time zone that works in iCal that I can use as an example?
iBook G4 Mac OS X (10.4.6) iCal version 2.0 (1024)

mm, that doesn't sound so comfortable. I'll stay with the time counting.
Thanks for reply;)

Publisher report with web service data source timing out in browser

I have a report which calls a web service. Depending on parameters passed the data can take 5+ minutes to return. The report often times out in the browser before data is returned.
Is there a BI Publisher or OBIEE setting where i can extend the timeout setting?
easy points!

Think I found it in report data source settings, nevermind!

Blog won't publish entries with November 2010 dates

I started a blog and website about 10 days ago and haven't had any trouble publishing blog posts in the month of November. Starting yesterday and continuing to today, I can't publish entries dated in November, even with the current day. Once I change the date to October, the entry publishes without issue. Has this happened to anyone else? I have plenty of space left.

This somehow resolved itself a few days into November.

Building BI Publisher report with "BI Answers" data model

I've installed OBIEE 10.1.3.4.1 and try to create a BI Publisher report using BI Answers as data model. The catalog list of Answers comes up empty, and in the log files I find following error:
- Exception:
AxisFault
faultCode: {http://schemas.xmlsoap.org/soap/envelope/}Server.userException
faultSubcode:
faultString: java.lang.IllegalArgumentException: The char '0x14' after '��u��3' is not a valid XML character.
faultActor:
faultNode:
faultDetail:
{http://xml.apache.org/axis/}stackTrace:java.lang.IllegalArgumentException: The char '0x14' after '��u��3' is not a valid XML character.
at org.apache.axis.components.encoding.UTF8Encoder.writeEncoded(UTF8Encoder.java:81)
at org.apache.axis.encoding.SerializationContext.writeSafeString(SerializationContext.java:1289)
at org.apache.axis.encoding.ser.SimpleSerializer.serialize(SimpleSerializer.java:104)
at org.apache.axis.encoding.SerializationContext.serializeActual(SerializationContext.java:1504)
at org.apache.axis.encoding.SerializationContext.serialize(SerializationContext.java:980)
Does anyone have a clue?
Thanks,
Marc

option1:
The query should be same @ detail level, only the template has to be different for summary and details.
@runtime, user can choose to see the detail/summary
Disadvantage, if the data is huge,
advantage , only one report.
option2:
create two separate reports summary and details
and create diff data and diff layout and keep it as different report
Advantage, query will perform based on the user run report, summary/detail, so that you can write efficient query.
Dis advantage , two reports query/template to be maintained.

Tutorial - How to triple boot OSX, Linux and Windows 8.1 with a shared Data Partition without any third party Win / OSX softwares

This is not a question, but rather a personal guide that has proved to be running successfully.
I would like to thank numerous sources, including Christopher Murphy's suggestions at:
Re: Repairing Boot Camp after creating new partition
Before proceeding, there are certain concepts needs to know:
Why Boot Camp does NOT allow further partitioning of drives after Windows has installed?
Answer: Because the way Apple configures the Mac to be recognized as non UEFI capable system on Windows.
Quote from Christopher Murphy based on the above line:
However, Windows on Macs right now use CSM-BIOS mode in Mac firmware that presents BIOS to Windows rather than EFI. Windows thinks it's on a BIOS computer, and therefore mandates the use of MBR for boot disks, rather than GPT. So that's why we have this hybrid MBR+GPT approach on Mac with Windows on it. You inherit the limitations of MBR, which is four primary partitions.
So what does it means?
It means that OSX + EFI + Recovery HD + Boot Camp partition = 4 primary partitions and thus any attempt to modify the disk will render booting issues of either system.
For more info on GPT (GUID Partition Table disks VS Master Boot Record or MBR in short, you may visit: http://msdn.microsoft.com/en-us/library/windows/hardware/dn640535%28v=vs.85%29.a spx)
So, how to overcome it?
The general guideline is to install ALL GPT ready OS first then create a Data partition, before installing Windows (Which is again, NOT supported GPT due to EFI configuration by Apple where end-users are not able to modify it).
Interestingly, since Mac Pro 2013 Late supports only Windows 8 and above, thus it is not known if this CSM-BIOS applies to it or not.
Do take note that GPT disks in Windows can only be booted when the system meets the 2 requirements:
http://msdn.microsoft.com/en-us/library/windows/hardware/dn640535%28v=vs.85%29.a spx#gpt_faq_win7_boot
1) Windows x64 version (Which is a must for newer Macs. If you cannot go to Boot Camp 5, then you need Windows 7 x86 or 32bit version)
2) UEFI system. However, Windows sees all Macs (With the possibility of Mac Pro 2013 Late is an exception. To be determined) as BIOS, or rather NON-UEFI system.
In short, booting on GPT disks is not possible for Mac in Windows.
Summary,
It is tested that a combination of the following will not work:
- OSX + Windows + Linux
- Windows + OSX + Linux
- Windows + Linux + OSX
Usually it can create the system un-bootable or OSX refused to install due to the system does not recognize such partitions and / or Disk Utility refused to format a free space. An example screen-shot is provided below:
The error message is shown as
Title: "Failed to erase volume" Message: "Failed to wipe volume, as an error occurred: MediaKit has reported that the device does not have enough free space to execute the requested operations."
The second thing is about the preparations we need.
1) 1X Windows 7 or 8 DVD or USB thumbdrive
1A) If you uses a DVD to install, you will need another thumbdrive to load the BootCamp drivers for Windows as well as may requires an external DVD drive for newer Macs
2) 1X Linux DVD of your choice. Personally I choose Fedora 20.
So ready? Let's go.
1. Using Disk Utility, shrink the OSX's partition size to what is needed. For me, I give OSX 150GB. Do NOT create any new partition.
Disk Utility should see something like below whereby only OSX partition is left with desired disk space. The remaining space are to be unused disk space for the moment.
Note: Click on the top most item that should start with the size of your HDD / SSD. Then clicked on "Partition" and specify the desired OSX size. Hit "Apply" after that.
2: Download Boot Camp drivers only via Boot Camp Assistant. The USB thumbdrive shall be used later after Linux's installation.
Boot Camp Assistant should see this:
I have only selected "Download latest Windows Support Files from Apple"
3. Insert Linux DVD, reboot Mac into EFI mode (The left most first "EFI mode").
Note 1: Before rebooting, please plugged in an Ethernet adapter because Wi-Fi drivers is not installed.
Note 2: For Thunderbolt adapters, it must be plugged in before reboot as hot-swapping is not supported under Linux. More on the tips at the end of this article.
Note 3: Press and hold "Option" after the screen turns black. Release Option key after you see the image as below:

For the unfortunate part that did not make it on time to edit the images:
9. Install the Windows Support software from your CD/USB drive to gain full functionality of your computer. Reboot and go to Windows again.
Note 1: You may choose to eject disc at this point of time. For Apple SuperDrive users, you will need to wait until the drivers (i.e. Boot Camp support files) is installed and rebooted before ejecting is reasonably possible (As I failed to figured out how to right click without the drivers)
Note 2: Unlike Windows 7 on KBase article TS4599 Keyboard/trackpad inoperative, black screen, or alert messages when installing Windows 7, USB stick can be plugged in after the Windows installation is done. This is because Windows 7 (And probably Windows 7 with SP1 DVD) does not have a built in USB 3 drivers when it was released back in 2009 where USB3 has not arrived then.
Note 3: Due to TPM, Bitlocker is not supported without the use of thumbdrives.
10. Using Disk Management to determine the given drive letter for the DATA partition (DO NOT DELETE and RECREATE partition or else you can goodbye to booting Linux and OSX). Disk Management will not allow you to format it as exFAT / FAT32 in graphical way.
Note: You may remove or modify some of the disk letters in Disk Management. However, do NOT remove / modfify the drive letter for the partition with 200MB size in HFS. This is because it will disallow booting of Linux and neither could Windows nor OSX can do anything EXCEPT to reinstall Linux only.
11. Open Command Prompt in Administrator Mode (Important!!), and key in the following command:
format F: /FS:exFAT
Give this volume a label after it has successfully formatted before hitting "Enter" again.
Note: Mine Data partition was assigned as F drive. Please make necessary adjustment to "F:" should your Data partition is assigned to other letters.
12. After that, Setup your Data partition structure as you like.
Tip: Minimally create the important folders such as:
- Music
- Documents
- Movie (Videos)
- Downloads
- Pictures
All these folders are commonly used by the 3 OSes. I do NOT recommend changing of /home (OSX and / or Linux) and / or user home directory (Windows) either partially or as a whole.
This is because of compatibility issue.
On a side note, iTunes Media Library used in OSX and Windows are NOT able to be use interchangably due to hard-coded path used.
13. Useful troubleshooting in Fedora / Linux:
With references to these:
http://chaidarun.com/fedora-mbp
http://anderson.the-silvas.com/2014/02/14/fedora-20-on-a-macbook-pro-13-late-201 3-retina-display/
http://unencumberedbyfacts.com/2013/08/16/linux-on-a-macbook-pro-101/
I would like to highlight a few important points:
1) Wi-Fi driver:
http://rpmfusion.org/Configuration
Note 1: The sound driver should be installed at Out of Box Experience. However, the Wi-Fi is not.
Note 2: Install both free and non-free repository. By the way, some other software like VLC can only be found after the Free Repository is installed.
Search for "akmod-wl" in Gnome-Package-Installer in order to install Wi-Fi drivers
Note 3: For those who do not have Ethernet adapters and their Mac does NOT have a built-in Ethernet port, it is recommended to get one. This is because Fedora 20 does not have a good support for iPhone USB tethering. Unsure for Andriod / Blackberry / Windows Phone users.
2) Grub Menu:
It will show several options to boot into OSX, even of the capability to boot into x86 or x64 mode. However, neither of them is bootable except Linux and the rescue.
Hence, it is recommended to remove the items by hand in this file:
/boot/efi/EFI/fedora/grub.cfg
Command to be used:
"sudo gedit /boot/efi/EFI/fedora/grub.cfg"
Parts to be removed:
- For any extra kernels, delete the target entry by locating the line "menuentry" under "/etc/grub.d/10_linux" sector to one line above the next "menuentry".
It is recommended to keep one main kernel, and one recovery at the minimal.
- For other OS, delete all the entry (Since neither it can works) under "/etc/grub.d/30_os-prober" sector without removing the lines starts with ###.
Auto Mount exFAT partition:
- After installing extra packages for exFAT support (Since it is not supported by Fedora 20 from a default installation), you may wish to edit "/etc/fstab" in order to mount the exFAT partition during boot time.
Command to be used:
"sudo gedit /etc/fstab"
Add the following line in gedit:
UUID=702D-912D /run/media/Samuel/DATA exfat defaults 1 2
Note 1: For DATA partition, OSX & Boot Camp partition, Fedora defaults mounts under: "/run/medua/<Username with case sensitive>/<Partition Label Name>"
Note 2: UUID is unique ID. You can find out the UUID by:
Step 1: First determine the DATA partition number:
"sudo gdisk /dev/sda"
Step 2: Determine the UUID of this partition number:
"sudo blkid /dev/sda8"
Reference 1: http://manpages.courier-mta.org/htmlman5/fstab.5.html
Reference 2: http://liquidat.wordpress.com/2007/10/15/short-tip-get-uuid-of-hard-disks/
3) Overheating CPU
Solution is to issue the following command in Linux terminal: su -c "echo -n 1 > /sys/devices/system/cpu/intel_pstate/no_turbo"
4) System resumes immediately after suspend
Solution is to issue the following command in Linux terminal: su -c "echo XHC1 > /proc/acpi/wakeup"
5) What does not works well out of box:
- Both GNOME and KDE's fonts are too small to be readable for out of box experience. Additional configuration is a need. (Some of the info can be found on "More Tips" later)
- Thunderbolt hotplugging is NOT supported under Windows and Linux so far. Neither FaceTime HD camera works as well.
- The red light in Headphone jack is always on. I do not have luck in switching off the light without losing the sound.
Note 1: It is determined that the module "snd_hda_intel" is used by both cards (HDMI and normal output)
Note 2: It is also known that blacklisting it can switch off the redlight at the price of muting the system.
Note: Based on this article, http://support.apple.com/kb/TS1574
A Mac (Except Mac Pro) needs servicing when there is a red light while the system fails to detect internal speakers. However, this article does NOT applies to this issue.
5A) More Tips:
Install gnome-tweak-tool for more customization
Search for: "gnome-package" to install:
Install Gnome Package Installer for advanced package repository
Install Gnome Package Updater for advanced updates to be install (Whereby Fedora's App Store alike might not show the relevant updates)
14. Verify if disk is still GPT:
Use Gdisk to determine if the disk is pure GPT:
http://ubuntuforums.org/showthread.php?t=1742682
Command: sudo gdisk -l /dev/sda (The entire hard drive)
You should see the MBR is "Protective" instead of anything else.
15. Congrats, the system is ready for triple boot. (I forgot to eject my Windows DVD when the photo was taken)
Note 1: You cannot set the default startup disk in Linux due to the lack of Boot Camp Control Panel in Linux.
Neither is changing startup disk recommended in Windows due to the inability to display correctly.
For me, I click "Cancel" whenever I am on this tab (Feel free to make other Boot Camp adjustments in other tabs).
Only OSX I know that can show the startup disk options correctly.
Note 2: For some reason, OSX likes to auto mount the EFI partition everytime it boots up. It is not known to have any issue for ejecting other disks or mounting disks via Disk Utility.
Note 3: It is not determined if any Firmware or System upgrades will cause issues. It is only known that all 3 OS's regular updates should not be an issue.
System Updates excludes Mac OSX 10.9.3 updates to OSX 10.9.4 type as I had done it on a OSX 10.9.4 Mac or Windows 8.1 to Windows 8.1 Update 1 since my Windows DVD comes with Update 1.
System Upgrades refers to OSX Mavericks to Yosemite, Fedora 20 to Fedora 21, Windows 8.1 Update 1 to Windows 8.2 / Windows 9 for that matter.
Note 4: Reset SMC and / or PRAM will NOT affect your ability to boot any of the OS (OSX, Recovery HD, Fedora & Windows 8)
Yup, that is it!

Share my Outlook calendar with icloud?

I use Outlook with the company's exchange server and want to publish the exchange calendar with icloud so that I can then share the icloud calendar with someone else. The company blocks directly sharing the exchange calendar so I'm looking to publish it/sink it with icloud calendar.

Hello ramirofromstrockholm,
The steps detailed below explain how to go about publicly share a calendar (which doesn't require that one be an iCloud user to accept).
Click the Share button to the right of the calendar you want to share, then select Public Calendar.
Note: You can also share the same calendar privately. For instructions, see the previous task, “Share a calendar privately.”
To invite people to view the calendar, click Email Link.
Type one or more email addresses in the To field, then click Send.
The people you specify automatically receive an invitation email that includes the calendar’s URL. An invitee doesn’t need to be an iCloud user to accept an invitation to view a shared public calendar.
In the sidebar, a shared calendar has a dark Share button.
You can also resend invitations to one or more invited participants at any time.
iCloud: Share a calendar with others
http://support.apple.com/kb/PH2690
Regards,
Allen

Can I share my published iCal with any iphone or must they have mac w ical?

I have a mac and an iphone. I use ical. My friend has an iphone, but does not have a mac, thus does not use ical. Is there a way that I can get the hundreds of items I typed into iCal onto my friends iphone calendar? She can view it online, but can't subscribe to it. Any thoughts?
Thanks!

Hello ramirofromstrockholm,
The steps detailed below explain how to go about publicly share a calendar (which doesn't require that one be an iCloud user to accept).
Click the Share button to the right of the calendar you want to share, then select Public Calendar.
Note: You can also share the same calendar privately. For instructions, see the previous task, “Share a calendar privately.”
To invite people to view the calendar, click Email Link.
Type one or more email addresses in the To field, then click Send.
The people you specify automatically receive an invitation email that includes the calendar’s URL. An invitee doesn’t need to be an iCloud user to accept an invitation to view a shared public calendar.
In the sidebar, a shared calendar has a dark Share button.
You can also resend invitations to one or more invited participants at any time.
iCloud: Share a calendar with others
http://support.apple.com/kb/PH2690
Regards,
Allen

Share windows outlook calendar with outlook:mac calendar

My work computer is a macbook pro. Windows users have invited me to share their outlook calendars, but I can't see them. Are there resolutions to this problem (other than convincing everyone to get Macs?).

Hello ramirofromstrockholm,
The steps detailed below explain how to go about publicly share a calendar (which doesn't require that one be an iCloud user to accept).
Click the Share button to the right of the calendar you want to share, then select Public Calendar.
Note: You can also share the same calendar privately. For instructions, see the previous task, “Share a calendar privately.”
To invite people to view the calendar, click Email Link.
Type one or more email addresses in the To field, then click Send.
The people you specify automatically receive an invitation email that includes the calendar’s URL. An invitee doesn’t need to be an iCloud user to accept an invitation to view a shared public calendar.
In the sidebar, a shared calendar has a dark Share button.
You can also resend invitations to one or more invited participants at any time.
iCloud: Share a calendar with others
http://support.apple.com/kb/PH2690
Regards,
Allen

Sharing calendars with "Everyone"--cons?

Since we can no longer publish calendars with the MobileMe upgrade, and the people that use to see mine aren't MobileMe users, what are the cons, dangers, repercussions of sharing a calendar to "everyone"?
That seems to be the only way to send a link for the person to subscribe to.

Twingirlz,
...what are the cons, dangers, repercussions of sharing a calendar to "everyone"?
That question involves a conundrum which only the (sharing) user can answer based upon the sensitivity of the data. I think that a better question might be...What are the chances that someone could hack a webcal address that consists of this alpha numeric sequence...webcal://www.me.com/ca/sharesubscribe/x.xxxxxxx/xxxx-x-x-xxxxxxxx-xx xx-xxxx-xxxx-xxxxxxxxxxxx.ics?
I am not a security expert and I offer my opinion with some trepidation. My understanding of the problem is not the danger that someone could hack the address, but that you must ultimately trust your invited subscribers to keep the webcal address confidential. They could deliberately, or inadvertently distribute the webcal address without your knowledge, thereby exposing your calendar data.

Publishing calendars in Lion?

I just bought a MacBook Air. I thought I would create a new calendar with my horseshow dates and publish it. We have had published calendars before and they are so helpful. This year was complicated by multiple horses, multiple clubs, various types of events - we all know what it is like. When I finished the calendar and clicked on Publish, I got a message saying the request creates a conflict and that the calendar cannot be published. When I request to publish, I am asked if I wish to publish to Mobile.me, which I do have.
What have I done - or not done? I havent had problems with this before, so I am guessing I missed a step in Lion? Or is this part of the big get ready for iCloud?
Any ideas helpful!

I don't know whether Lion has added any additional complications, but in any event you can't publish a calendar which is listed under your MobileMe login name to a web page - you can only do this with calendars listed under 'on My Mac'. However you can share a MobileMe calendar, though the recipient needs to use a CalDAV client (such as iCal or Google Calendar) to view it. Please see this page for details:
http://www.wilmut.webspace.virginmedia.com/notes/icalpublish.html

Is there any report to view" the blocked Vendor Invoices along with the Pay

Dear Gurus,
Is there any report to view" the blocked Vendor Invoices along with the Payment Date". Please Let me know.
Balaji

I think you can solve this issue with a Query.
Fernando.

Wilyhost Agent setup finished successfully with limitations - SMD SPS15

Dear all,
we have connected different SAP J2EE systems to our Solution Manager Diagnostics without any problems. Now we are trying to connect the corresponding ABAP backend systems to the SMD. The Setup Wizard for these systems are completed with a warning. Everything seems to work fine, but the warning are spurious (we get only the yellow light, not a green one).
Did anyone has the same "problems" with ABAP managed systems and has anyone a solution for the yellow light ?
Thanks and best regards
Patrick
Error/Warning Message -
Wilyhost Agent setup finished successfully with limitations. Data of at least one action is not available in Enterprise Manager.
Created destination RT5|s3p5012_RT5_00
Created action RT5 - RT5 AbapSystem
Created action RT5|s3p5012_RT5_00 - RT5|s3p5012_RT5_00 AbapInstance
Created 2 action(s).
1 Wilyhost Agent(s) and 0 EP Agent(s) from host s3p2012 are connected to the EM.
90 seconds after restarting the WilyHostAgent the data of the following action is still missing in EM: RT5
90 seconds after restarting the WilyHostAgent the data of the following action is still missing in EM: RT5|s3p5012_RT5_00
Wilyhost Agent setup finished successfully with limitations. Data of at least one action is not available in Enterprise Manager.
Error/Warning Message -

Hi to all,
I have addition information about the Wily HostAgent problem. Here are some other alerts/warnigs from another SAP portal :
============================================================================
Jul 15, 2008 10:34:15 AM [Thread[SAP GC|FB7_J02_server3,5,main]] Error      com.sap.smd.wily.hostagent.action.GcScannerAction - scanInitial(): scan for file /usr/sap/FB7/J02/j2ee/../work/std_server3.outterminated: /usr/sap/FB7/J02/j2ee/../work/std_server3.out (No such file or directory)
Jul 15, 2008 10:34:15 AM [Thread[SAP GC|FB7_J02_server3,5,main]] Error      com.sap.smd.wily.hostagent.action.GcScannerAction - doRun(): Action temporarily stopped: SAP GC|FB7_J02_server3
[EXCEPTION]
com.sap.smd.wily.hostagent.TransientException: java.io.FileNotFoundException: /usr/sap/FB7/J02/j2ee/../work/std_server3.out (No such file or directory)
        at com.sap.smd.wily.hostagent.action.AbstractAction.handleError(AbstractAction.java:259)
        at com.sap.smd.wily.hostagent.action.GcScannerAction.scanInitial(GcScannerAction.java:391)
        at com.sap.smd.wily.hostagent.action.GcScannerAction.doRun(GcScannerAction.java:135)
        at com.sap.smd.wily.hostagent.action.AbstractAction.run(AbstractAction.java:52)
        at com.wily.EDU.oswego.cs.dl.util.concurrent.PooledExecutor$Worker.run(PooledExecutor.java:725)
        at java.lang.Thread.run(Thread.java:534)
Caused by: java.io.FileNotFoundException: /usr/sap/FB7/J02/j2ee/../work/std_server3.out (No such file or directory)
        at java.io.RandomAccessFile.open(Native Method)
        at java.io.RandomAccessFile.<init>(RandomAccessFile.java:204)
        at com.sap.smd.wily.hostagent.action.GcScannerAction.scanInitial(GcScannerAction.java:372)
        ... 4 more
Jul 15, 2008 10:35:15 AM [Thread[Thread-364,5,main]] Warning    com.sap.smd.wily.hostagent.action.AbstractAction - run(): Action SAP GC|FB7_J02_server2 not running because status is WAITING_FOR_DESTINATION
Jul 15, 2008 10:35:15 AM [Thread[Thread-366,5,main]] Warning    com.sap.smd.wily.hostagent.action.AbstractAction - run(): Action SAP GC|FB7_J02_server1 not running because status is WAITING_FOR_DESTINATION
============================================================================

Having private time blocked on published calendars with limited shared data

Similar Messages

Maybe you are looking for