Having problem creating Database on Oracle8i installed on a stand alone NT 4.0

Hi,
I have installed Oracle 8i Enterprise Edition on my stand alone Windows NT4.0 work station (Service Pack 3). After installation, it tries to create a sample database and just hangs there. I also tried aborting it and creating it using "Database Configuration Assistant" and still facing the same problem. It doesn't show any error but just hangs indefinitely at the database creation menu. I observed that the listener is not running.
Kindly let me know if there are any precautions to be taken while installing a Oracle 8i on Stand alone Windows NT. My NT is NOT CONNECTED to any network. Also, let me know how I can create a database when listener is not running.
Regards,
Sheshachala

I installed 816 EE on my home NT40 workstation without any troubles. Please make sure that you've suttisfied all installation requirements as written in the Installation Guide.Install other version of Servis Pack. I am usinn SP6. Alo you can try to copy a sample database from cd without creating it
Yours.

Similar Messages

I also am having problems creating cd cover. When I try to print onlt text comes out picture art is 1 big black square. cannot load library error shows up 126. Do anyone have a solution for this problem?

Having problem creating cd cover.When I try to print one out only text print no picture. Error message appears "cannot load library"LXBBPRP,DLL Default error126. Anyone have a solution to this problem?

One other note I do have parallels installed but not running on both machines.
Make sure on both machines that even if Parallels is not running that the two VPNs it creates in System Preferences > Network are set to Off.
Also make sure that in System Preferences > Sharing that Internet Sharing is nnot ON.
Later you will have to adjust the Parallels setting to NOT Share the Mac IP.
10:18 PM Sunday; June 1, 2008

I am having problems creating PDF file and downloading them

I am having problems creating PDF file and downloading them

Hi Randy Keil,
You might need to sign up with your Adobe ID and password at "https://cloud.acrobat.com/convertpdf"
Then you can choose the desired files to create the PDF.
Now, let me know what error message do you get while doing the same.
What kind of files are you trying to convert to PDF?
Have you checked with your internet connection and tried using a different browser?
Hope to get your response.
Regards,
Anubha

We are having problems pushing push adobe reader install and updates via Microsoft deployment

We are having problems pushing push adobe reader install and updates via Microsoft deployment. We issue is with our mail server. We cant open PDF within outlook.
Cliff Butler
Coastal Connection
www.coastal-connection.com

Hi ccbutler,
What is the current version of Acrobat/Reader installed and what is the version of Outlook installed.
Was it working before if yes do you have idea when did problem started.
~Ajlan Huda.

Can Adobe Premiere CC 2014 be Installed as a Stand-Alone Upgrade?

Can Adobe Premiere CC 2014 be Installed as a Stand-Alone Upgrade without having to conflict with an Adobe CC suite on a given machine?

Yes, I have PrP CS6, CC and CC2014 all currently available on my system. The only pain I've experienced is that project files insist on opening in CC2014 even though I am wanting to primarily work in CC. If I tell the system to always open ALL .prproj files in CC, it seems to be very inconsistent and typically opens in CC2014.
CC2014 creates a new, separate app file and all (most?) prefs are stored in 8.0 folders.

Is anyone having problems with their apps after installing ios7

I installed ios 7 on both my ipad2 and my iphone 4s. Some of my apps are not working correctly afther the download. An example is my Overdrive app that I use to read ebooks. When the app tries to load the book, it throws me back to the desktop. Anyone else having problems?

No ...
Try a reset ..
Reset the device:
Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears.
If that doesn't help, tap Settings > General > Reset > Reset All Settings
If nothing above helped, restore your iPhone > iTunes: Restoring iOS software

Creating DATABASE in 10g installed in 64 bit windows 7

hi please some buddy help me to create database in oracle 10g
I have installed 10g in win7 64 bit.It is working properly but configuration assistant is not being installed thats why i am unable to create database.

925013 wrote:
hi please some buddy help me to create database in oracle 10g
I have installed 10g in win7 64 bit.It is working properly but configuration assistant is not being installed thats why i am unable to create database.You can't install 10g on Win 7.
Workaround is to use VMware configuration of WinXP or Win Vista
or
try oracle 11g version

Error in Create Database Instance while installing NW_JAVA_700SP14_SR3

hi frds
i am getting an error while installing NW_JAVA_700SP14_SR3
the error comes in the Step 13 Create Database Instance
the details are
> Subprocess starts at 20080627004121
Execute Command : C:\sapdb\programs\pgm\dbmcli.exe -n Trust_In_ME -d J2E -u CONTROL,******** load_systab -u SUPERDBA,******** -ud ********
Execute Session Command : exit
> Subprocess stops at 20080627004147
> Subprocess call failed
ERR
-24964,ERR_EXECUTE: error in program execution
3,""C:\sapdb\J2E\db\bin\x_python" "C:\sapdb\J2E\db\env\lsystab.py" -R "C:\sapdb\J2E\db" -d J2E -u SUPERDBA,********
Removing obsolete objects
Installing Loader tables
Installing messages and help
Installing SYSDBA tables
Installing comments for SYSDBA tables
Installing precompiler tables
Installing system tables for R3 backup information
Installing ODBC tables
Traceback----
   File "C:\sapdb\J2E\db\env\installib.py", line 401, in connectAndInstall
     installRoutine (session, options)
   File "C:\sapdb\J2E\db\env\lsystab.py", line 190, in install
     "DBANA"
   File "C:\sapdb\J2E\db\env\installib.py", line 163, in include
     install (session, options)
   File "C:\sapdb\J2E\db\env\ODBC.py", line 111, in install
Command----
DATALOAD TABLE BASETYPES
"TYPE_NAME"           1
"DATA_TYPE"           2
"PRECISION"           3 DEFAULT NULL
"LITERAL_PREFIX"      4 DEFAULT NULL
"LITERAL_SUFFIX"      5 DEFAULT NULL
"CREATE_PARAMS"       6 DEFAULT NULL
"NULLABLE"            7
"CASE_SENSITIVE"      8
"SEARCHABLE"          9
"UNSIGNED_ATTRIBUTE" 10 DEFAULT NULL
"MONEY"              11
"AUTO_INCREMENT"     12 DEFAULT NULL
"LOCAL_TYPE_NAME"    13 DEFAULT NULL
"MINIMUM_SCALE"      14 DEFAULT NULL
"MAXIMUM_SCALE"      15 DEFAULT NULL
"SQL_DATA_TYPE"      16
"SQL_DATETIME_SUB"   17 DEFAULT NULL
"NUM_PREC_RADIX"     18 DEFAULT NULL
"INTERVAL_PRECISION" 19 DEFAULT NULL
"REMARKS"            20 DEFAULT NULL
INFILE 'c:\docume1\mehta's\locals1\temp\tmpnxyvvp'
COMPRESSED
SEPARATOR '|'
DELIMITER ''
Error----
loader.LoaderError: [-25501] Error opening file ''c:\docume1\mehta's\locals1\temp\tmpnxyvvp'': OS error: [123].
can anyone help me to resolve this issue
Regards
JM

Hello John,
some basics:
1. Is the drive formatted with NTFS?
2. Are you using an local or domain user?
3. Are there any antivirus- and/or firewall-programs installed? If so, please deactivate them while installing.
4. Is the computer connected to an network or if not did you install the loopback-adapter?
Regards,
Norman Schröder

How to create database in oracle8.0.5 for linux

I install an Oracle 8.0.5 standard edtion for Linux .But when I
login sqlplus as 'system'and use 'create database...',it reply
that I don't have priviledge!Why?
How can I create database anyway?(with which tools or methord?)
null

coco (guest) wrote:
: I install an Oracle 8.0.5 standard edtion for Linux .But when I
: login sqlplus as 'system'and use 'create database...',it reply
: that I don't have priviledge!Why?
: How can I create database anyway?(with which tools or methord?)
If you can connect as 'system' in sqlplus then I have a feeling
that you already have a database running :)
Anyway, to create another one ensure that you have new ORACLE_SID
set in environment and new init<SID>.ora file created, then:
$ svrmgrl
SVRMGR> connect internal
SVRMGR> startup nomount
SVRMGR> create database ....
(after that usually add rollback segments/tablespaces and run
catalog and catproc scripts etc.)
Andre
null

I'm having problems creating a simple program for an introduction to programming class.

I'm not exactly sure where this question should go so please excuse me if this is in the wrong place. At this point in the class we are learning about if/else statements. The text provided was written by a collaboration of the teachers. In the course material
for the if/else part they show us examples using numbers. Then the course also shows us a video to help us better understand (it doesn't. I'm not the only student having problems on the online course.) by giving us an example using bool to show if a statement
is true. Now our actual assignment is what is confusing me and other students. The assignment is to create a program that asks a question such as "Is this class hard?" and it should have three different responses depending on what you type in. If
you type "yes" it would respond "Oh no! I'm sorry you're having problems!" if you type "no" it would respond "Glad to hear!" if you type something random it would say "I'm sorry. I didn't understand. Please respond
with either "yes" or "no"." I'm not exactly sure how we were supposed to know how to do that from the course material provided and it's stressing me and other students out. Any and all help in this matter would be greatly appreciated.

Make sure your folder having administration rights.
some folders property is read only... so check by right clicking on the folder and the properties.
This may help.
Thanks,
Bala

Problem creating database in RHEL3 using dbca

I have installed oracle 9iR2 on RHEL3 and applied the patch 3006854
but while installing installing Net Configuration Assistant was not installed it gave an error.
now I am trying to create database using dbca but getting an error as
ORA-12546:TNS:Permission denined.
plz guide me in solving this problem

At which step/stage in DBCA you get this error?
You can try to dump out the creation scripts and run them manually see if you can get through.

Create database error during instalation

I install Oracle Server 8.0.5 on Linux (kernel 2.0.34)
I can't create database during Oracle 8.0.5 Instalation.
The error is ORA-03113 end of communication channel.
I get this message after "connect internal" and
"startup nomount" in svrmgrl.
Help!
null

anybody can help ? Tks

Cannot install Applcations in Stand-Alone Media image

Since updating from SCCM 2012 R2 to CU3 i have not been able to get our Stand-Alone media to work.
The Task Sequence is running fine until it gets to the install of the SCCM client. The installation of the client runs and then it restarts and then it runs it again, but when the task is done it goes to the login screen of Windows and ignores all the steps
which comes after the client install.
I have put in some alerts in order to find out exactly where is fails and the alert which runs prior to the client install is shown but the alert immediately after the install is never run.
I am beginning to supect that the client install is failling.
I have updated the package on the DP wihthout success.
TS:
SMSTS.LOG
<![LOG[==============================[ OSDSetupHook.exe ]==============================]LOG]!><time="08:48:39.816+00" date="01-06-2015" component="OSDSetupHook" context="" type="1" thread="2152" file="osdsetuphook.cpp:186">
<![LOG[Executing task sequence]LOG]!><time="08:48:39.831+00" date="01-06-2015" component="OSDSetupHook" context="" type="1" thread="2152" file="osdsetuphook.cpp:279">
<![LOG[Loading the Task Sequencing Environment from "C:\_SMSTaskSequence\TSEnv.dat".]LOG]!><time="08:48:39.847+00" date="01-06-2015" component="OSDSetupHook" context="" type="1" thread="2152" file="basesetuphook.cpp:366">
<![LOG[Environment scope successfully created: Global\{51A016B6-F0DE-4752-B97C-54E6F386A912}]LOG]!><time="08:48:39.847+00" date="01-06-2015" component="OSDSetupHook" context="" type="1" thread="2152" file="environmentscope.cpp:659">
<![LOG[Environment scope successfully created: Global\{BA3A3900-CA6D-4ac1-8C28-5073AFC22B03}]LOG]!><time="08:48:39.847+00" date="01-06-2015" component="OSDSetupHook" context="" type="1" thread="2152" file="environmentscope.cpp:659">
<![LOG[Debug shell is enabled]LOG]!><time="08:48:39.925+00" date="01-06-2015" component="OSDSetupHook" context="" type="1" thread="2152" file="basesetuphook.cpp:1440">
<![LOG[Successfully enabled debug command shell support.]LOG]!><time="08:48:39.925+00" date="01-06-2015" component="OSDSetupHook" context="" type="1" thread="2152" file="debugwindow.cpp:156">
<![LOG[Configuring local administrator account]LOG]!><time="08:48:39.925+00" date="01-06-2015" component="OSDSetupHook" context="" type="1" thread="2152" file="basesetuphook.cpp:1462">
<![LOG[Enabling local administrator account]LOG]!><time="08:48:39.925+00" date="01-06-2015" component="OSDSetupHook" context="" type="1" thread="2152" file="basesetuphook.cpp:1219">
<![LOG[Account was already enabled]LOG]!><time="08:48:39.925+00" date="01-06-2015" component="OSDSetupHook" context="" type="1" thread="2152" file="basesetuphook.cpp:1228">
<![LOG[Re-assign all drive letters...]LOG]!><time="08:48:39.925+00" date="01-06-2015" component="OSDSetupHook" context="" type="1" thread="2152" file="diskutils.cpp:1941">
<![LOG[The drive information which has no drive letter can not be found. No need to re-assign driver letters.]LOG]!><time="08:48:39.925+00" date="01-06-2015" component="OSDSetupHook" context="" type="1" thread="2152" file="diskutils.cpp:1951">
<![LOG[Installing SMS client]LOG]!><time="08:48:39.925+00" date="01-06-2015" component="OSDSetupHook" context="" type="1" thread="2152" file="basesetuphook.cpp:1474">
<![LOG[Clearing existing client configuration.]LOG]!><time="08:48:39.925+00" date="01-06-2015" component="OSDSetupHook" context="" type="1" thread="2152" file="installclient.cpp:291">
<![LOG[Cleaning existing client certificates from SMS certificate store]LOG]!><time="08:48:39.925+00" date="01-06-2015" component="OSDSetupHook" context="" type="0" thread="2152" file="installclient.cpp:138">
<![LOG[The client identity was not found in the environment. A new identity will be generated for this client.]LOG]!><time="08:48:39.925+00" date="01-06-2015" component="OSDSetupHook" context="" type="1" thread="2152" file="installclient.cpp:363">
<![LOG[Using CRL: true]LOG]!><time="08:48:39.925+00" date="01-06-2015" component="OSDSetupHook" context="" type="1" thread="2152" file="installclient.cpp:952">
<![LOG[Unable to read SMS client cert from environment. Not restoring SMS client cert.]LOG]!><time="08:48:39.925+00" date="01-06-2015" component="OSDSetupHook" context="" type="2" thread="2152" file="installclient.cpp:962">
<![LOG[Executing command line: "C:\WINDOWS\system32\_SMSOSDSetup\TsProgressUI.exe" /Register:WinPE]LOG]!><time="08:48:39.925+00" date="01-06-2015" component="OSDSetupHook" context="" type="1" thread="2152" file="commandline.cpp:827">
<![LOG[==========[ TsProgressUI started in process 2180 ]==========]LOG]!><time="08:48:39.940+00" date="01-06-2015" component="TsProgressUI" context="" type="1" thread="2184" file="winmain.cpp:330">
<![LOG[Registering COM classes]LOG]!><time="08:48:39.940+00" date="01-06-2015" component="TsProgressUI" context="" type="1" thread="2184" file="winmain.cpp:187">
<![LOG[sbModulePath = C:\WINDOWS\system32\_SMSOSDSetup\TsProgressUI.exe]LOG]!><time="08:48:39.940+00" date="01-06-2015" component="TsProgressUI" context="" type="1" thread="2184" file="tsprogressuiclass.cpp:625">
<![LOG[Shutdown complete.]LOG]!><time="08:48:39.940+00" date="01-06-2015" component="TsProgressUI" context="" type="1" thread="2184" file="winmain.cpp:512">
<![LOG[Process completed with exit code 0]LOG]!><time="08:48:39.940+00" date="01-06-2015" component="OSDSetupHook" context="" type="1" thread="2152" file="commandline.cpp:1123">
<![LOG[Successfully registered TS Progress UI.]LOG]!><time="08:48:39.940+00" date="01-06-2015" component="OSDSetupHook" context="" type="1" thread="2152" file="utils.cpp:2279">
<![LOG[Executing command line: "C:\_SMSTaskSequence\OSD\PRI00158\ccmsetup.exe" /useronly /source:C:\_SMSTaskSequence\OSD\PRI00158 /config:MobileClient.TCF /status:564]LOG]!><time="08:48:39.987+00" date="01-06-2015" component="OSDSetupHook" context="" type="1" thread="2152" file="commandline.cpp:827">
<![LOG[Launching command shell.]LOG]!><time="08:49:32.715+00" date="01-06-2015" component="OSDSetupHook" context="" type="1" thread="2172" file="debugwindow.cpp:202">
<![LOG[executing command: C:\WINDOWS\system32\cmd.exe /k]LOG]!><time="08:49:32.715+00" date="01-06-2015" component="OSDSetupHook" context="" type="1" thread="2172" file="debugwindow.cpp:63">
<![LOG[executed command: C:\WINDOWS\system32\cmd.exe /k]LOG]!><time="08:49:32.715+00" date="01-06-2015" component="OSDSetupHook" context="" type="1" thread="2172" file="debugwindow.cpp:80">
<![LOG[Process completed with exit code 0]LOG]!><time="08:50:19.515+00" date="01-06-2015" component="OSDSetupHook" context="" type="1" thread="2152" file="commandline.cpp:1123">
<![LOG[Start to cleanup TS policy]LOG]!><time="08:50:19.515+00" date="01-06-2015" component="OSDSetupHook" context="" type="0" thread="2152" file="utils.cpp:3055">
<![LOG[End TS policy cleanup]LOG]!><time="08:50:19.531+00" date="01-06-2015" component="OSDSetupHook" context="" type="0" thread="2152" file="utils.cpp:3103">
<![LOG[Active request handle is empty, registering with new active request handle. This is expected if the TS was started from a media/PXE.]LOG]!><time="08:50:19.531+00" date="01-06-2015" component="OSDSetupHook" context="" type="2" thread="2152" file="utils.cpp:4522">
<![LOG[Saving the new active request handle for the task sequence: {03EB3804-5F8D-4AA4-9C9F-5FE7E57A4FB0}]LOG]!><time="08:50:19.531+00" date="01-06-2015" component="OSDSetupHook" context="" type="1" thread="2152" file="utils.cpp:4535">
<![LOG[Succesfully registered the tasksequence with the execution manager]LOG]!><time="08:50:19.547+00" date="01-06-2015" component="OSDSetupHook" context="" type="1" thread="2152" file="utils.cpp:4597">
<![LOG[Executing command line: "C:\WINDOWS\system32\_SMSOSDSetup\TsProgressUI.exe" /Unregister]LOG]!><time="08:50:20.576+00" date="01-06-2015" component="OSDSetupHook" context="" type="1" thread="2152" file="commandline.cpp:827">
<![LOG[==========[ TsProgressUI started in process 512 ]==========]LOG]!><time="08:50:20.592+00" date="01-06-2015" component="TsProgressUI" context="" type="1" thread="1112" file="winmain.cpp:330">
<![LOG[Unregistering COM classes]LOG]!><time="08:50:20.592+00" date="01-06-2015" component="TsProgressUI" context="" type="1" thread="1112" file="winmain.cpp:204">
<![LOG[Shutdown complete.]LOG]!><time="08:50:20.592+00" date="01-06-2015" component="TsProgressUI" context="" type="1" thread="1112" file="winmain.cpp:512">
<![LOG[Process completed with exit code 0]LOG]!><time="08:50:20.592+00" date="01-06-2015" component="OSDSetupHook" context="" type="1" thread="2152" file="commandline.cpp:1123">
<![LOG[Successfully unregistered TS Progress UI.]LOG]!><time="08:50:20.592+00" date="01-06-2015" component="OSDSetupHook" context="" type="1" thread="2152" file="utils.cpp:2320">
<![LOG[Moving logs to SMS client directory]LOG]!><time="08:50:20.592+00" date="01-06-2015" component="OSDSetupHook" context="" type="1" thread="2152" file="basesetuphook.cpp:1495">
I hope someone out there can point me in the right direction

Hi Martin
Could you try adding a delay in the task sequence after the reboot, I have experienced a number of problems with SCCM 2012 R2 and reboots in task sequences. Microsoft Premier Support recommend creating a 5 minute delay. A shorter one may resolve the problem,
I would recommend trying this first.
The other thing to check is how are you preparing you boot media are you using a usb, if so is it formatted to NTFS or FAT32, I would always recommedn NTFS

Can Install Base be installed as a stand-alone module?

Hi,
Is Install Base always integrated with another module or can it be used as a stand-alone product?
Thank You,
Ellice

I believe the answer is in Chapter 2 of the Implementation Guide at http://download.oracle.com/docs/cd/B53825_01/current/acrobat/121csiig.pdf
HTH
Srini

Anyone else having problems creating autotext entries in Word 2003 after installing Acrobat 10 pro?

After installing Adobe Acrobat 10 Professional I can no longer create Autotext entries in Word 2003.
It seems to specifically be a problem with the Acrobat PDFMaker plugin for Microsoft Office as if I dont install that option Autotext does work however I need that functionality.
I've tried version 10.0.0 and 10.1.3.
Is anyone else having this problem?

It looks like Acrobat v7 had a similar issue preventing Microsoft Word from saving changes to the Normal.dot template which was later resloved in the 7.0.5 patch.
http://web.archive.org/web/20100329065242/http://kb2.adobe.com/cps/331/331259.html
Its mentioned under the "Background Information".

Having problem creating Database on Oracle8i installed on a stand alone NT 4.0

Similar Messages

Maybe you are looking for