Having problem finding network on 5s was working fine till today
phone can not find network. Just keeps searching
can't log out of find my phone
so can't wipe phone
only got the phone from Apple store on 2 July
Hi @Annamalai007
Welcome to the HP Forums!
It is a terrific place to find answers.
For you to have the best experience in the HP forum I would like to direct your attention to the HP Forums Guide Learn How to Post and More
I see that your Simplepass was working until this morning when it was not. You have uninstalled and reinstalled software and updated the drivers but no change.
Was there any updates installed?
Have you tried dong a restore back to when it was all working? HP PCs - Using Microsoft System Restore (Windows 8)
Next I would do a Refresh Your PC to Resolve Problems (Windows 8).
If the issue still remains I suggest you do a recovery back to factory. HP PCs - Performing an HP System Recovery (Windows 8) . During the recovery process you will notice an option to backup your personal files to prevent data loss. If you have not recently done one I suggest you do one now.
HP PCs - Restoring Files that were Backed Up Using HP Recovery Manager (Windows 8)
I hope this helps.
Sparkles1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!
Similar Messages
-
Simple pass not working - It was working fine till today morning
I am having a "HP ENVY 15t-j100 Select Edition CTO Notebook PC " . Simple pass was working fine till today morning now all of a sudden it is showing an error message "Sensor not connected.Please connect sensor and try again" .
I tried the maximum methods for troubleshooting like uninstalling and reinstalling driver , software , updating them any many others.
the finger print sensor is working during log in and other occasions. but simple pass is not working.
My OS is Windows 8.1 (64 bit)
Kindly resolute my problem as soon as possible. Thank You
E-mail Id : [edited phone and email by moderator]Hi @Annamalai007
Welcome to the HP Forums!
It is a terrific place to find answers.
For you to have the best experience in the HP forum I would like to direct your attention to the HP Forums Guide Learn How to Post and More
I see that your Simplepass was working until this morning when it was not. You have uninstalled and reinstalled software and updated the drivers but no change.
Was there any updates installed?
Have you tried dong a restore back to when it was all working? HP PCs - Using Microsoft System Restore (Windows 8)
Next I would do a Refresh Your PC to Resolve Problems (Windows 8).
If the issue still remains I suggest you do a recovery back to factory. HP PCs - Performing an HP System Recovery (Windows 8) . During the recovery process you will notice an option to backup your personal files to prevent data loss. If you have not recently done one I suggest you do one now.
HP PCs - Restoring Files that were Backed Up Using HP Recovery Manager (Windows 8)
I hope this helps.
Sparkles1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping! -
i have the new ipad 16gb it was working fine till i went to download the new itunes and the apple mobile device recovery mode my windows pc cant find the software to download it i need help because my ipad wont work i only see the itunes and usb symbol can anybody help me.
Try these instructions:
http://support.apple.com/kb/TS3281
You may also have to go to the link in the bottom paragraph if the first page instructions do not work. -
When I open Yahoo mail beta I am unable to see any of my emails, this was working fine till about 3 days ago. If I change to classic mail they are there.
I can see them in internet explorer with yahoo mail betaClear the cache and the cookies from sites that cause problems.
"Clear the Cache":
*Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
"Remove Cookies" from sites causing problems:
*Tools > Options > Privacy > Cookies: "Show Cookies"
Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.org/kb/Safe+Mode -
PDF files not being displayed correctly, instead I get a blank screen with some sort of small pinned icon in the centre. It was working fine until today HELP!
What is your operating system? Reader version? Are these local or online PDFs? If online, in what browser?
Can you post a screenshot: https://forums.adobe.com/thread/1070933 -
hi, i hv macbook mid 2010 ..it was working fine till few days back but after updating it to mavericks, it keeps on shutting down itself...what to do ? could sm1 help me out ?
The startup disk may need repairing...
Startup your Mac while holding down the Command + R keys.
From there you should be able to access the built in utilities in OS X Recovery -
I bought Apple TV3 , it was working fine until today and stopped showing the status light. Please help.
try another cable it's a std cable that most consumer electronic use
if that does not help then I would try to connect it by a microUSB cable to see if I could restore the firmware from a computer running itunes
if that does not help then I would say that the appletv have died -
It was all fine till yesterday.. no proxy nothig is blocking. All other browsers working fine. Please assist
The connection was reset The connection to the server was reset while the page was loading.
The site could be temporarily unavailable or too busy. Try again in a few
moments. If you are unable to load any pages, check your computer's network
connection. If your computer or network is protected by a firewall or proxy, make sure
that Firefox is permitted to access the Web.Please try http://support.mozilla.com/en-US/kb/error%20loading%20web%20sites#w_interrupted-or-reset-connection
-
Premiere Pro CC has been working fine until today. I have completed my sequence and it is active. I have both audio and video checked when I am exporting using H.264 with Match Source Hi bitrate. I am choosing entire sequence. The audio exports but the video and title does not. Can anyone tell me how to troubleshoot this so I can complete this project? Please!
Greetings,
I've never seen this issue, and I handle many iPads, of all versions. WiFi issues are generally local to the WiFi router - they are not all of the same quality, range, immunity to interference, etc. You have distance, building construction, and the biggie - interference.
At home, I use Apple routers, and have no issues with any of my WiFi enabled devices, computers, mobile devices, etc - even the lowly PeeCees. I have locations where I have Juniper Networks, as well as Aruba, and a few Netgears - all of them work as they should.
The cheaper routers, Linksys, D-Link, Seimens home units, and many other no name devices have caused issues of various kinds, and even connectivity.
I have no idea what Starbucks uses, but I always have a good connection, and I go there nearly every morning and get some work done, as well as play.
You could try changing channels, 2.4 to 5 Gigs, changing locations of the router. I have had to do all of these at one time or another over the many years that I have been a Network Engineer.
Good Luck - Cheers,
M. -
Can not use my account, telling me the security code on my credit card is wrong, just update this a few weeks ago, was working fine until last night.
Take a look here:
http://support.apple.com/kb/TS1646
If that doesn't help, go here:
http://www.apple.com/support/itunes/contact/
and follow the instructions to report the issue to the iTunes Store.
Regards. -
My macbook pro will not start up. Its charging and fully charged but wont start. Was fine till yesterday when keyboard stopped typing and then shut down and now wont start up
If after an SMC reset it will not power on then I suggest you take it to an Apple store or Apple Authorized Service Provider for a diagnostic check and estimate of repairs.
Apple store Genius reservation http://www.apple.com/retail/geniusbar/ .
or find an Apple Authorized Service Provider https://locate.apple.com/country -
This is the problem details that come up with the box that says itunes has stopped working windows will close program..etc
Problem signature:
Problem Event Name: APPCRASH
Application Name: iTunes.exe
Application Version: 10.4.1.10
Application Timestamp: 4e4e1904
Fault Module Name: KERNELBASE.dll
Fault Module Version: 6.1.7600.16850
Fault Module Timestamp: 4e211485
Exception Code: 80000003
Exception Offset: 0001280c
OS Version: 6.1.7600.2.0.0.256.48
Locale ID: 1033
Additional Information 1: 0a9e
Additional Information 2: 0a9e372d3b4ad19135b953a78882e789
Additional Information 3: 0a9e
Additional Information 4: 0a9e372d3b4ad19135b953a78882e789
Read our privacy statement online:I had the same problem. I'm using 64bit Windows7. This solution only partially worked for me. I still couldn't connect to the iTunes store.
The following solution worked for me:
COPY QTMovieWin.dll
FROM c:\program files (x86)\common files\apple\apple application support\
INTO c:\program files (x86)/iTunes -
I have changed nothing on my computer, and it was opening and functioning fine this morning. However, everytime I try to open it, I get a message box saying "Could not initialize the application's security component. The most likely cause is problems with files in your application's profile directory. Please check that this directory has no read/write restrictions and your hard disk is not full or close to full. It is recommended that you exit the application and fix the problem. If you continue to use this session, you might see incorrect application behaviour when accessing security features." And when the page actually opens, it says "Unexpected response from server
Firefox doesn't know how to communicate with the server.
Check to make sure your system has the Personal Security Manager
installed.
This might be due to a non-standard configuration on the server."
Nothing will load and I don't know what's wrong!Did Firefox update to 4.0.1?
A possible cause is security software (firewall) that blocks or restricts Firefox or the plugin-container process without informing you, possibly after detecting changes (update) to the Firefox program.
Remove all rules for Firefox from the permissions list in the firewall and let your firewall ask again for permission to get full unrestricted access to internet for Firefox and the plugin-container process.
See:
* [[Server not found]]
* [[Firewalls]] -
My iphone is no longer activated, It worked for three weeks. I can't get the server to work. On hold with Verizon for almost an hour and half and got disconnected.
You have a bit of a mess on your hands, but you can try doing this:
Download the iOS 6 update (ipsw) file to your computer from here: http://osxdaily.com/2012/09/19/ios-6-ipsw-direct-download-links/, being careful to download the version for your model.
Put your phone in DFU mode, as explained here: https://discussions.apple.com/thread/2648467?threadID=2648467&tstart=0
Restore you phone in iTunes using the ipsw file you downloaded in step 1, as described here: http://osxdaily.com/2010/11/23/how-to-use-ipsw-files/.
If you get a 1014, 1013, 1638 or 3194 error, you access to Apple's servers is being blocked by your Hosts file. You'll have to edit your Hosts file to remove this block, then try restoring again. You can use Google to find out how to do this. -
HT201365 cannot activate iphone although it was working fine until today
Hi My phone was off for 3 days when i went to power it up had activation errors unable to back up or restore as find my phone is on and cannot switch it off as phone is stuck on activation erro page and no service to ee provider iphone will not respond to computer from itune web site phone is useless at the moment.
please any ideas?If you were using iOS 7 beta it has expired. If you're a developer go to the Developer forums and downlad 7.0.2. If you aren't a developer you're going to have to find solutions elsewhere. There's a discussion on this here: https://discussions.apple.com/thread/5415804?tstart=0.
Maybe you are looking for
-
After updating to ios 8.2 i can't download and update the apps in AppStore on my ipad
after updating to ios 8.2 i can't download and update the apps in AppStore on my ipad! What happens?
-
If a machine opens a socket connection to me, how to I get data from it. I have the IP of the machine and the socket number. Do I just give the IP number to Data Socket Read and the listen for data? Thanks
-
How can use iphon4s as a 3G modem in mc or pc?
how can use iphon4 as a 3G modem in mac or pc?
-
Handling EMPTY NAMESPACES IN BPEL XSLT
Hello, I am getting following response in XSLT. I would like to remove xmlns:"" from my response. Any help is greatly appreciated. <?xml version="1.0" encoding="UTF-8" ?><Envelope xmlns:ns1="http://schemas.xmlsoap.org/soap/envelope/" xmlns="http://sc
-
I am keeping very sensitive information in Numbers and other persons may have access to my IPad but I do not want them to have access to some of these information. Does anyone know how I can protect my Numbers documents?