Having problem getting installed root certificate to work
We have a recerse proxy set up with an SSL certificate singed by our local CA. We are trying to connect to this reverse proxy from iPad over 3G connection.
Initially, we received the error "Safari cannot open the page because it could not establish a secure connection to the server". Reading up on this, realized that we needed to install the CA root certificate as a trusted root on the device.
Got iPhone Configuration utility, set up a configuration profile for the sole purpose of installing the certificate, added the certificate through Credentials section, and assigned the profile to the device. I can see the certificate updated to the device through General>Profiles and can confirm that it IS the root certificate used to general the SSL certificate on the proxy.
Even after application to the iPad (tried on iPhone also), attempt to access our proxy server from the iOS device fails with the same error.
It is interesting to note, that on a personally owned iPad, instead of the error noted, I received a pop-up indicating the certificate was unknown, and I was presented with options to "Cancel, Details, Continue". Clicking on "Details", I was allowed to view the certificate properties, and ALSO had a button to "Accept". Hitting "Accept" installed the certificate as trusted, and I get through the proxy server just fine. Only problem now is that if I *want* to re-create the prompt, I have no way, as I've found no way to remove certificates from the iPad unless installed via configuration profile.
We've checked and double-checked, and the certificates all "line up" to the correct CA.
Any ideas where I night be going wrong?
Thanks!
New clue....
I only have the problem of not connecting to the proxy server if I'm using a 3G connection. If I turn on wi-fi, connect to an access point, the installed root certificates do their job, and I connect just fine.
Anyone know of potential problems with SSL certificates over 3G?
Similar Messages
-
HT4913 I am having problems getting the itunes match to work.
I have paid for itune match. I cannot get it to work. I need help.
Hi Goose1976,
Welcome to the Support Communities!
What specific issues are you having?
The articles below will explain how to subscribe to iTunes Match, add your computer or iOS device to iTunes Match, what the iTunes / iCloud icons mean, and how to troubleshoot the service.
iTunes Store: Subscribing to iTunes Match
http://support.apple.com/kb/ht4914
iTunes: How to add a computer or iOS device to iTunes Match
http://support.apple.com/kb/HT4913
iTunes Match: Understanding the iCloud Status icons
http://support.apple.com/kb/TS4124
iTunes Store: Troubleshooting iTunes Match
http://support.apple.com/kb/ts4054
Cheers,
- Judy -
Since installing LION having problems getting photo images to upload?
since installing LION having problems getting photo images to upload? anyone else havie this problem? I did finally get a message that the format was wrong, but I have changed nothing on my camera. Only change was the installing of LION.
This is from the Kodak site which says there is no Lion compatible driver/software yet, but it is coming in late August:
http://support.en.kodak.com/app/answers/detail/a_id/41646/kw/os%20x%20lion/selec ted/true
If you don't want to wait there is always this kind of device for less than $10 (I don't own or endorse it):
http://www.walmart.com/ip/Moultrie-USB-2.0-SD-Card-Reader/14972138 -
Hello, i am having problems getting face time to work, I keep getting an error message saying the server could not process the registration, I am using the username and password I always have and it has always worked in the past, any ideas?
We aren't Apple, just users like you volunteering to help other users with problems. Threatening to go to Samsung doesn't mean anything to us. What troubleshooting have you tried so far?
-
Anyone having problems getting CD covers to print after downloading latest software?
Anyone having problems getting CD covers to print after downloading latest software?
Lacking any responses to my initial post above, I will briefly update how I resolved this issue today.
Installed new external hard disc, 1 TB WD My Passport for Mac, and straightforward setup involving first installing current OS X operating system, then system migrator utility to rebuild the same setup as saved in latest Time Machine backup. The whole process was somewhat time consuming due to my internet connection speed and USB data transfer speeds but it went without any issues. The computer now boots up and operates identical in all respects to how it did before the problem occurred.
Regarding the internal HD of my iMac, if I now run Disc Utility to verify the disc, it reports "appears to be OK". However, viewing the disc usage in "About This Mac" window, it displays as entirely empty. Opening it in the finder also shows only a "Apple Hot News.mbox" file and a single .jpeg image, and .nothing else.
Interestingly, the Bootcamp partition of my iMac's internal HD continues to work fine and appears unaffected by the problem. I use bootcamp rarely but still will plan to set up a replacement bootcamp volume on the new hard disc soon, in order to take its place.
That the problem surfaced coincident with the software update may have been nothing more than bad luck? At this point I have no reason to suspect that the softward update had anything to do with the difficulties. -
I am having difficulty getting my scanner (HP5590 Scanjet) working with my MacBook Pro, can anyone help please. It did work alright with my IBM notebook.
There's a new driver bundle for OSX 10.6 that you might need to install, the HP link seems to be failing at the moment but there's a version of it here: HP_Installer_Scanjet_v2.4.3_Ph4.dmg
There's a piece on the HP Forum about it here (some folks have problems installing ...)
http://h30499.www3.hp.com/t5/Macintosh-Compatible-Products/Scanner-Drivers-softw are-for-Snow-Leopard-Mac-OSX-10-6-will-not/td-p/2301674 -
I'm running iTunes 10.5 on my Macbook Pro and software 4.1 on my 2g iPod touch and having problems getting photo's to sync. Same error, "iPod can't be synced req'd file can't be found". Tried deleting the photo cache, restoring the iPod etc but to no avail.
Try here:
iTunes: Unable to sync photos
Usually deleting the iPod Photo Cache Folder works. Note that if you sync via the folder method, make sure you dlete all the ifolders since :
The iPod Photo Cache stores the photos that are optimized for display on your iPod, iPad, or iPhone. The location of this folder depends on the syncing options you select. In iTunes, if you change the selection in the “Sync Photos From” pop-up menu, a new iPod Photo Cache folder will be created (and the previous folder will remain). -
I'm having problems with install version 11.1.4. If I uninstall and reinstall will I lose all my downloaded music?
Hi, so did I. It seems to be a huge problem with everyone. I opened a folder on desktop and called it target. I copied all my songs into that folder.
I uninstalled Itunes completely. Rebooted. Then I installed a fresh install.
I then dragged all the songs back to Itunes and it worked. I hope that helps.
I read an article the other day and apple is suppose to come out with some genius fix for this problem, it really seems to be global.
Good luck, -
Having problems getting podcast on iTunes, tried to resubmit and got an already submitted error
Having problems getting podcast on iTunes, tried to resubmit and got an already submitted error. How can I get the podcast on iTunes?
You didn't need to get it removed: you can make any changes to a feed that you want, changing, adding or deleting episodes, and iTunes will pick them up.
However, in the present situation you have fallen over a bug in the submissions process. The workaround is changing the title; as this hasn't worked you need to change the feed URL if possible, and also you could change the contents of the 'link' tag.
If you can't get it sorted you could try emailing Support at podcasts 'at' apple.com and asking them to reinstate you (give them all the details) - their responses are a bit variable, but they may help you. -
I am having problems getting my imac started.
I am having problems getting my imac started. It begins to load, takes along time, then shuts down.
I do not have a disk either to re install the platform.
Any ideas on what I could do or try?
I tried to start it in recovery mode. I pressed the shift key, held it, tapped it.....and I could not get it to register.
The computer carried on trying to load with the loading bar displayed.
Does this suggested, Internal HD failure?Thanks for replying Paul.
I ran check as suggested.
Seems to be ok.
Still no change with the start up issue.
("Do I have back up to restore from?") Possibably , not sure.
Any other suggestions would be welcome. -
I am having problems with installing Itunes 10.5 .With the windows installer
I am having problems with installing Itunes 10.5.It's the first time i dowload it,but every time het gives me an error message that a programm that was needed for installing didn't run.
What can i do???When I attempt the download for Itunes 10.6, I get an immediate response of ""Files shared by these updates" has an invalid signature. The download has been removed."
That's suggesting that the AppleApplicationSupport.msi is getting damaged during the download via Apple Software Update for Windows.
Are you able to get the 10.6 update to go through if you use an iTunesSetup.exe (or iTunes64Setup.exe) installer file from the Apple Website?
http://www.apple.com/itunes/download/ -
Lots of info about one user using multiple computers. What about multiple users with separate Apple IDs using same computer? Having problems getting my wifes new iPhone talking to her apple account on the computer we share (2 users)
You need to create a user account for your wife (or yourself depending on who has the current user account). When syncing, each of you should sign in as a separate user, login to iTunes and then sync. I had this problem when my sister got an iPhone. When we did her initial sync, everything on my iPhone showed up on hers. Apple gave me this solution.
-
I have bought Adobe Photoshop Elements 10 last August 2013 and having problems with installing it on Windows 8.1. Why am I having this problem?
You can check you Adobe account online to see if the serial number is registered under your account. If not then your only option will likely be to contact Adobe Support directly thru chat to see if they can provide you with a/the serial number. For them to do so will require you being able to prove ownership.
Serial number and activation chat support (non-CC)
http://helpx.adobe.com/x-productkb/global/service1.html ( http://adobe.ly/1aYjbSC ) -
I am trying to connect my Sony DCR-TRV350 to iMovie so that I can make DVD's from family videos. I am having problems getting the video camera connected. Any advice on how to do this?
What happens when, after you connect your cam, you go to File > Import Media?
But before that, does your cam require you to export your video files upon USB connection? I have a JVC Everio HD and I have to "Export to Library" from the cam's menu first-thing. This was true even in prior iMovie versions. -
Dear All Precious Friends,
I am having problem while installing Oracle Portal Forms Reports and Discoverer 11g on Windows Server 2008 64 bit,
I have already installed Oracle Database 11g Release 2 -------
----Then i configured JAVA Access bridge
--------then installed and configured Required Schema using Repository Creation Utility of same version of Database 11g,
-----------then installed Oracle Business Intelligence 11g version 11.1.1.6.0 which includes Web logic..............I am feeling that i did right at this point...........
..............also feeling comfortable after install Oracle Identity and Access Management 11g ..................
-----------------but don't know how to configure OID to install Oracle Portal Forms Reports and Discoverer 11g...............
Please help my Oracle Friends
Your early help will be highly appreciated.
thanks and regards
HassanYou said, "...+I would like to install Release 2(11.1.1.2.0)+ ...". Be careful. 11.1.1.2.0 is not Release 2. The version for Rel 2 is 11.1.2.0, notice that there is one less "1". Also, there is no way to patch from Release 1 to Release 2.
In EDelivery, this is what you should find if you search on "Oracle Fusion Middleware" for "Microsoft Windows x64 (64-bit)":
First look for this link then drill into it:
Oracle Fusion Middleware 11g Media Pack for Microsoft Windows x64 (64-bit)
In this section you will find the following:
This is the full product installation of FMw 11 Release 2 (Forms & Reports)
Oracle Forms and Reports 11g R2 (11.1.2.0.0) for Microsoft Windows x64 (64-bit) V28761-01
This is the full product installation of FMw 11 Release 1 (includes Portal, Forms, Reports, and Disco)
Oracle Portal, Forms, Reports and Discoverer 11g (11.1.1.2.0) for Microsoft Windows x86 (64-bit) (Part 1 of 4) V18785-01
Oracle Portal, Forms, Reports and Discoverer 11g (11.1.1.2.0) for Microsoft Windows x86 (64-bit) (Part 2 of 4)
Oracle Portal, Forms, Reports and Discoverer 11g (11.1.1.2.0) for Microsoft Windows x86 (64-bit) (Part 3 of 4)
Oracle Portal, Forms, Reports and Discoverer 11g (11.1.1.2.0) for Microsoft Windows x86 (64-bit) (Part 4 of 4)
This is the FMw 11 Release 1 patch set that will bring the above 11.1.1.2.0 installation to 11.1.1.6. This is NOT a full product installation - just a patch
Oracle Portal, Forms, Reports and Discoverer 11g Patch Set 5 (11.1.1.6.0) for Microsoft Windows x86 (64-bit) V29850-01
There are no patch sets for Release 2 as of yet.
Maybe you are looking for
-
Ipod not recognised in ITunes. My solution (try this - worked for me!)
Hello. i had IPOD 30GB vid for Xmas and have spent 3 days surfing through info trying to find out why itunes did not recognise it! I could see it in my computer but not itunes. I tried everything - and I mean EVERYTHING. I reinstalled, rebooted, rest
-
Need help!! How do i cancle my backup? It wont let me do anything! Trying to get my imessages and facetime to work
-
Spanish Voice to Text converter
I've been recording in iMovie'09 a video. Is there any program that takes whatever I'm saying in the video and generate a word or text document with my words? I'm speaking in Spanish and I'm the only one speaking.
-
How to handle in LSMW the validation if 01 and 35 for two values
in lsmw if we are having in flat file as 01 one entry and other 34. size of the field is only two character . As of now iam checking to put 0 before one if the value 01 however iam getting problem in the case of 34 case 1 ) if iam having 01 the below
-
System Landscape (Dual Development System)
Dear SAP Experts, We have Two-System Landscape(DEV-PRD) Whereas cross-client data is used in both the Customizing and quality assurance clients. Currently, our company, just merged with another non-SAP-using company. The First move is to implement FI