Having problem in using Clix comman cpyduplicate

Hello MDM Experts,
We have just upgraded our MDM system to MDM 5.5 SP6.
After upgrade, we are getting an error while using the below command:
CLIX cpyDuplicate MDMHostSpec sourceRepositorySpec targetRepositorySpec Credentials -F
The error code that we are getting is "-2080243703".
In pervious version it was working fine.
Appreciate your help in advance.
Regards
Ritesh Mittal

Hi Ritesh,
I think we cannot get the version of MDM CLIX, try to execute other commands and confirm with your basis guys whether they have upgraded MDM CLIX as well.
Regards,
Jitesh Talreja

Similar Messages

I am having problem while using ms word with anjal( OS X Lion 10.7.5 (11G63))

i am having problem while using ms word with anjal is not working properly but its working in facebook and other areas.i need and its very important to using tamil fonts for my job.can anyone help me out from this problem.
thanking you
by
moses

Those who are knowledgable in this area (myself not among them) say that Word's support for Asian languages is faulty. The best word processor for that use is "Mellel."

Having problem in using RUN_PRODUCT in oracle apps 11.0.3

I am having problem in using RUN_PRODUCT in oracle apps 11.0.3. Error in oracle apps is
FRM-40733 PL/SQL built-in RUN_PRODUCT failed
What could be the possible cause for this error ?

Hi again;
I found this please also check this:
Price List Migration from 11.0.3 to 11.5.10/R12.
Regard
Helios

I am having problem with using the Basic brush definition

I am having problem with using the Basic brush definition. When I try to click on it will not allow me to use it and will automatically use the 5 pt. oval brush definition. The only way I can use the basic brush is after I have already drawn something and then I have to click on the stroke and then press basic. This is incredibly annoying and if anyone could help I would greatly appreciate it. (I have Adobe CS6)

for whatever reason, the basic 'brush' you see in the brushes palette effectively means removing any brush from a path. to draw with the brush tool you need a brush defined. in your case the last one selected being the 5 pt oval one.

I am having problem with using my Basic brush definition

I am having problem with using the Basic brush definition. When I try to click on it will not allow me to use it and will automatically use the 5 pt. oval brush definition. The only way I can use the basic brush is after I have already drawn something and then I have to click on the stroke and then press basic. This is incredibly annoying and if anyone could help I would greatly appreciate it. (I have Adobe CS6)

Basic is not a brush, only a starting point for you to make a brush. Load the real brush you want before beginning to draw.

I have 10.5.8 and i'd like to update to Lion but I haven't the app store avaiable to my sistem and I can find the atualization. At the software update doesn't have any atualization... I updated my iphone4 to IOS5 and having problems to use ICloud

i have 10.5.8 and i'd like to update to Lion but I haven't the app store avaiable to my sistem and I can find the atualization. At the software update doesn't have any atualization... I updated my iphone4 to IOS5 and having problems to use ICloud

As Retired Engineer indicated, you will need to install Snow Leopard first. After you install Snow Leopard, you need to go into Software Update and perform the updates. 10.6.6 will install the App Store. You should continue to update to 10.6.8 before purchasing and installing Lion from the App Store.
Be sure your machine meets the minimum requirements. Basically, any Mac with a Core 2 Duo processor or later and at least 2GB of RAM (but 4 is highly recommended). If you have a first generation MacBook Pro with a Core Duo, you will not be able to upgrade to Lion.

I am having Problems with using my adobe digital Reader ,it gives me the error E_ADEPT_IO Activation

i am having Problems with using my adobe digital Reader ,it gives me the error E_ADEPT_IO Activation,what can i do to activate

This is the Adobe Reader forum. If you are talking about Digital Editions, the right forum is here:
http://forums.adobe.com/community/adobe_digital_editions

Having problems with using shift alt command when using the square tool

having problems with using shift alt command when using the square tool

Marco,
If no good reason, such as the one suggested by Silkrooster, is present, you may try the list, hoping for one of the easy ones at the top.
The following is a general list of things you may try when the issue is not in a specific file, and when it is not caused by issues with opening a file from external media. You may have tried/done some of them already; 1) and 2) are the easy ones for temporary strangenesses, and 3) and 4) are specifically aimed at possibly corrupt preferences); 5) is a list in itself, and 6) is the last resort.
If possible/applicable, you should save current artwork first, of course.
1) Close down Illy and open again;
2) Restart the computer (you may do that up to at least 5 times);
3) Close down Illy and press Ctrl+Alt+Shift/Cmd+Option+Shift during startup (easy but irreversible);
4) Move the folder (follow the link with that name) with Illy closed (more tedious but also more thorough and reversible), for CS3 - CC you may find the folder here:
https://helpx.adobe.com/illustrator/kb/preference-file-location-illustrator.html
5) Look through and try out the relevant among the Other options (follow the link with that name, Item 7) is a list of usual suspects among other applications that may disturb and confuse Illy, Item 15) applies to CC, CS6, and maybe CS5);
Even more seriously, you may:
6) Uninstall (ticking the box to delete the preferences), run the Cleaner Tool (if you have CS3/CS4/CS5/CS6/CC), and reinstall.
http://www.adobe.com/support/contact/cscleanertool.html

Having Problem on using WRT 600 N Storage.

Hello everyone:
I'm using the WRT600N Wireless, and decided to use the Storage today.
But after I setup the harddrive( connection is ok, and I can see the harddrive on the 192.168.1.1 page), I'm having problem on " how to connect to the harddrive by using my computer"?
Is there any ip address which I can use for connecting?
and I also setup the Media Server, and I can see the server by using my PS3, but I cannot see any files inside(I already copy some different types of movies inside).
Please help me. thanks!

In order for it to work, you have to plug in a new hard drive with no data on it and format it using LELA. I found that I will avoid the USB "feature" and stick with my shared drive. It's 500% faster and I can take my hard drive anywhere without worrying I can't use it later with the router.

Having problems printing using ePrint from email with an SMTP transmission failure

I am having a problem printing from my Apple devices (iPhone, iPad (both running iOS 5), Mac Book Pro and iMac (Lion)) from my Mobile me account (Apple's @me.com mail). My printer is a D110a and is up-to-date. The return error message I'm getting is attached. The printer is working fine as a wireless printer but whenever I try to email something to the ePrint printer address (@hpeprint) I get this message. While I wasn't a heavy user of emailing to this printer, I did have it working. I'm very discouraged by all of the postings I've found on very similar if not identical problems that others are having ... Please help! Your message cannot be delivered to the following recipients: Recipient address: [email protected] Reason: SMTP transmission failure has occurred Diagnostic code: smtp;550 5.7.1 Command rejected Remote system: dns;email.hpeprint.com (TCP|17.148.16.96|51538|15.201.224.75|25) (hpeprint.com ESMTP Postfix) Original-envelope-id: [email protected] Reporting-MTA: dns;asmtp021-bge351000.mac.com (tcp-daemon) Arrival-date: Tue, 13 Dec 2011 15:27:06 +0000 (GMT) Original-recipient: rfc822;[email protected] Final-recipient: rfc822;[email protected] Action: failed Status: 5.7.1 (SMTP transmission failure has occurred) Remote-MTA: dns;email.hpeprint.com (TCP|17.148.16.96|51538|15.201.224.75|25) (hpeprint.com ESMTP Postfix) Diagnostic-code: smtp;550 5.7.1 Command rejected initions=main-1112130128

I cannot say if this is a supported path or not, but I have a few thoughts about what you are doing. I have done a few prototypes that would send emails programatically to eprint printers.
1. do you recieve the email if you send it to a different address (your email address) - you said the email is making it out of the server, but does it make it to destinations.
2. can you try this with your own printer that has an hp connected account? this would make it easier to troubleshoot.
3. hpconnected has the idea of open to anyone or allowed senders only. depending on how your customer has their printer setup, you could be blocked by the service because of those settings. with those options, they also have the option to block users or allow users to either of those settings.
3a. login to hpconnected.com, select devices, look at the device being printed to, and there is a column for ePrint Access that will say 'Allowed Senders Only' or 'Open to Anyone'. going to the settings for a printer will give more details about these settings, and allow you to manage blocked / allowed users.
More info under 'Manage ePrint Preferences' on this doc:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03550522&cc=us&dlc=en&lc=en
4. I believe that in hpconnected, you can look at collections and it will show all recieved jobs - which would allow them to be printed again. I think this will list received jobs from email.
I work for HP.
David

SOLUTION: Are you having problems with using HDV, FCP X and iDVD?

If you edit HDV (TAPE) in FCP X and want to burn the video in iDVD you will find the following problem . . . iDVD squashes the image as shown in the screenshot below.
Whether you export as ProRes or H.264, iDVD will see it like this as a squashed image.
This is because iDVD does not recognise HDV anamorphic images unless they are in the Apple Intermediate Codec.
There are 2 solutions to this problem:-
1. Create a ProRes 422 Custom Compressor Preset with a frame size of 1920 x 1080.
The only downside to this is that the conversion process in my 2008 iMac takes about 5 times realtime.
2. Create an Apple Intermediate Codec preset for HDV. This encodes on my iMac in around realtime, so it is at least 4 times faster than the ProRes solution.
Unfortunately, if you have Compressor 4 you cannot create Apple Intermediate Codec presets, but Compressor 3.5 will and what is more important, that preset can be installed in Compressor 4.
So you can export your HDV project from FCP X using Compressor Presets in either ProRes or AIC and use the resulting file in iDVD to get a correctly proportioned image like this.
I prefer to use the AIC preset as it is 4 times faster and there is no quality difference on the final DVD.
What do you do if you haven't got Compressor?
Well you can email me for a 12KB copy of the preset as I believe FCP X can use it even though you don't have Compressor.

Ian,
Thanks for the tip!

Urgent! Having Problem Sync using mSync on PocketPC

I've keyed in JUNIUS in User and JUNIUS in Password and Alice in Server field. When I click Apply and Sync, I got the message "CNS-9104 Wrong IP address or network is not active, check hostname entry and network is active. A connection with the server could not be established" When I tried to log in to mSync using the same entries on my laptop where I installed my mobile server, it sync successfully. I also tried keyed in 127.0.0.1:80 in the Server field, yet I get the same error. How can I solve this problem? Is there anything wrong with the connection with the mobile server?

The CNS-9104 error is often returned by msync in case there is no active connection.
You have installed msync (so the client tools) on the same machine as mobile server's one. I would suggest that you install it on another computer or on a virtual computer (that's possible with tools like vmware) that would be hosted on your laptop... But in case you'd like to keep this configuration (client and server on the same machine) first check in documentation if this is possible (http://www.oracle.com + download + documentation + database + oracle 10g lite).
Then check that you can access your mobile server with netscape or internet explorer. You should have given a http port while installing mobile server. By default it is 80 so if it is default try: http://localhost/webtogo else try the port you entered try http://localhost:XX/webtogo with XX the port.
If this is OK then Msync should work. If not you may probably install the loopback interface. Please let me know if you don't find doc about installing the loopback I know there is this documentation on oracle.com but don't remember where...). You may have to deinstall tcp/ip then reinstall the loopback then again reinstall tcp/ip... that's really specific...

Having problem while using Stacked Column Chart.

Hi,
my result set is as below
STAGE OPERATION
TOTAL PCS
1 SIDE SEAM
6714
2 BIND BOTTOM
4522
2 SLEEVE ATTACH
6105
3 BIND TOP(E/N)
3781
5 SLEEVE HEM
3277
6 BIND TACK-2
1173
6 TACK-2
1277
6 TACK-4
268
I need to display it on the screen by using stacked column chart. I mean XAxis as "STAGE" YAxis as "TOTAL PCS" and "OPERATION" as series. I used DataBIndCrossTable as
chProd.DataBindCrossTable(dtView, "OPERATION", "STAGE", "TOTAL PCS", "Label=TOTAL PCS");
But, the results in the chart is displaying it in the first STAGE it self. I mean xaxis value 1 has all the yaxis value.
Can anyone please help me to get the results as first image?
I'm anable to attach the related images here.
Thanks in advance.
Regrds,
Rajesh.

Got the answer.
Just added
chProd.AlignDataPointsByAxisLabel();
Regards,
Rajesh

I having problems in using layers. I need to combine six pictures in one. Please help!

I have 6 pictures that I need to combine in one.

if1996 wrote:
I have 6 pictures that I need to combine in one.
if1996,
I am assuming that you wish to place these pictures on one background as a collage, and that your paper stock is 8.5"x11".
Ideally, these 6 pictures will have the same resolution. You can check this via Image>resize>image size. It is expressed in px/in. The rule of thumb is that for printing, the resolution should be in 240-300px/in range
Do the math so that the 6 pictures will fit on to the canvas - perhaps some are in landscape orientation, some portrait.
If you need to crop a picture(s) to a specific size, use the crop tool (on a duplicate picture).
If you are with me so far, try the following:
Go to File>new>blank file, enter width& height of the paper, and resolution the same value as that of the pictures or as close as possible., background color to suit
Open picture A, go to Select>all, go to Edit>copy to place it on the clipboard
Go back to the blank file, then Edit>paste
Use the move tool to position picture A, and to resize it with the corner handles of the bounding box, if necessary
Repeat steps 2-4 for pictures B,C,D,E,F.
You should have 7 layers: Background (the canvas) and 6 layers with the pictures. No doubt you will have to adjust the position of the pictures - just activate the appropriate layer, and use the move tool.
For orientation, it is very helpful to have the grid open (View>grid). This will not print.

Having Problem with using JUnit...causes "cannot resolve symbol" problems..

Hello, say i have a class
A
that contains an object of class B.
Now there's class X...
It's all fine and dandy trying to compile them both until i try to set the classpath for junit, by doing:
set classpath=%classpath%;C:\junit3.8.1\junit.jar
i'm pretty sure it's correct...
well once i type in this line into my command prompt (win 2k), the junit package now seems to be recognized by class X, which is my testing class that contains an object of class A.
but NOW class A can't find class B and i get a cannot resolve symbol error. Same goes for class X not being able to find class A.
Anyone have any suggestions? I'm a newb to this :( . Thanks.

nevermind! noob mistake.

Having problem in using Clix comman cpyduplicate

Similar Messages

Maybe you are looking for