Having problem to install Oracle Portal Forms Reports and Discoverer 11g on Windows Server 2008 64 bit

Dear All Precious Friends,
I am having problem while installing Oracle Portal Forms Reports and Discoverer 11g on Windows Server 2008 64 bit,
I have already installed Oracle Database 11g Release 2 -------
----Then i configured JAVA Access bridge
--------then installed and configured Required Schema using Repository Creation Utility of same version of Database 11g,
-----------then installed Oracle Business Intelligence 11g version 11.1.1.6.0 which includes Web logic..............I am feeling that i did right at this point...........
..............also feeling comfortable after install Oracle Identity and Access Management 11g ..................
-----------------but don't know how to configure OID to install Oracle Portal Forms Reports and Discoverer 11g...............
Please help my Oracle Friends
Your early help will be highly appreciated.
thanks and regards
Hassan

You said, "...+I would like to install Release 2(11.1.1.2.0)+ ...". Be careful. 11.1.1.2.0 is not Release 2. The version for Rel 2 is 11.1.2.0, notice that there is one less "1". Also, there is no way to patch from Release 1 to Release 2.
In EDelivery, this is what you should find if you search on "Oracle Fusion Middleware" for "Microsoft Windows x64 (64-bit)":
First look for this link then drill into it:
Oracle Fusion Middleware 11g Media Pack for Microsoft Windows x64 (64-bit)
In this section you will find the following:
This is the full product installation of FMw 11 Release 2 (Forms & Reports)
Oracle Forms and Reports 11g R2 (11.1.2.0.0) for Microsoft Windows x64 (64-bit) V28761-01
This is the full product installation of FMw 11 Release 1 (includes Portal, Forms, Reports, and Disco)
Oracle Portal, Forms, Reports and Discoverer 11g (11.1.1.2.0) for Microsoft Windows x86 (64-bit) (Part 1 of 4) V18785-01
Oracle Portal, Forms, Reports and Discoverer 11g (11.1.1.2.0) for Microsoft Windows x86 (64-bit) (Part 2 of 4)
Oracle Portal, Forms, Reports and Discoverer 11g (11.1.1.2.0) for Microsoft Windows x86 (64-bit) (Part 3 of 4)
Oracle Portal, Forms, Reports and Discoverer 11g (11.1.1.2.0) for Microsoft Windows x86 (64-bit) (Part 4 of 4)
This is the FMw 11 Release 1 patch set that will bring the above 11.1.1.2.0 installation to 11.1.1.6. This is NOT a full product installation - just a patch
Oracle Portal, Forms, Reports and Discoverer 11g Patch Set 5 (11.1.1.6.0) for Microsoft Windows x86 (64-bit) V29850-01
There are no patch sets for Release 2 as of yet.

Similar Messages

Help in Installing Oracle Portal,Forms,Reports and Discoverer(11.1.1.2.0)

Hi,
I am trying to install Oracle Portal, Forms, Reports and Discoverer 11g (11.1.1.2.0) for Linux x86-64.
I have installed weblogic 10.3.5 generic jar file.
When i try to install forms and reports server the configuration step fails while creating weblogic domain.
Please help me installing portal and reports.
Is there any patch i am missing or the weblogic version is incorrect?
Thanks.

You cannot configure Fmw 11.1.1.2 against WLS 10.3.5. They are not supported nor compatible.
If you want to use WLS 10.3.5, you need to "install" 11.1.1.2, but do not configure. That is an installation option. After you have successfully installed 11.1.1.2 you will need to patch it to 11.1.1.6. After patching, you then can run the configuration (config.bat).
http://docs.oracle.com/cd/E23943_01/install.1111/e10421/install.htm#CLINS256
Version 11 is far more complex than previous versions. I strongly encourage everyone to review the product documentation before trying to install. You can also refer to the following MyOracleSupport note:
Steps to Maintain Oracle Fusion Middleware 11g Release 1 (11.1.1) (Doc ID 1073776.1)

Errors:Installing Oracle Portal, Forms, Reports and Discoverer on Win7

Someone can help me?
I installed Oracle Portal, Forms, Reports and Discoverer on Win7.
I have install:
jdk 64bit
Oracle db 11g (64bit)
Oracle Weblogic 1033 (wls1033_generic.jar)
Oracle Portal, Forms, Reports and Discoverer (ofm_pfrd_win_11.1.1.2.0_64/ofm_pfrd_win_11.1.1.3.0_64)
Configure Components Screen:I just choose the Oracle Forms/reports Oracle Forms/reports builder Enterprise Manager Oracle Web Cache .
Configure Ports Screen:Auto Port Configuration.
Specify Proxy Details Screen:No
Specify Application OID Screen:NO
But when I configure the "Configuring the Classic Instance" under the "Oracle Classic 11g-Home1". It's always pending in "Creating the domain". No any Error information.
the related log information:
Creating a new AdminServer Object ...
AdminServer port is 7001
Starting the domain ...
LOADING DLL : C:\Oracle\Middleware\as_2\install\config\\StartUtil64.dll

Since your weblogic is on version 10.3.3, you can only succesfully configure your fusion middleware when you are on version 11.1.1.3.
So (1) restart the install of fusion middleware 11.1.1.2, (2) choose install type INSTALL ONLY, (3) start installation of fusion middleware 11.1.1.3 and finally (4) configure fusion middleware using AS_ORACLE_HOME\bin\config.bat

Oracle Portal,Forms,Reports and Discoverer 11G

Good evening
I installed the following products
* Oracle Database(to the 1st computer)
* Repository Creation Utility
* WebLogic Server(to the 2nd computer)
* Oracle Portal,Forms,Reports and Discoverer 11G(to the 2nd computer) – during installation I chose forms and reports
Identity Management and SSO are not installed, why they are used for?
While connecting to the base with the help of Visard I open Oracle Forms Builder by and create a primitive form. Everything is good. All are shown. I press Run Form which is written as Oracle Forms in browser and suggests keeping a clear file. Particularly in applied file!
Print screen of my monitor yo can see: http://www.sql.ru/forum/actualthread.aspx?tid=678852
Thanks for attention.

Identity Management and SSO are not installed, why they are used for?IDM and SSO is used for user authentication.
You can search for details about that.
>
While connecting to the base with the help of Visard I open Oracle Forms Builder by and create a primitive form. Everything is good. All are shown. I press Run Form which is written as Oracle Forms in browser and suggests keeping a clear file. Particularly in applied file!
Print screen of my monitor yo can see: http://www.sql.ru/forum/actualthread.aspx?tid=678852
Thanks for attention.the port which you have mentioned is it WLS_FORMS_PORT or any other.
Try running default Forms port WLS_FORMS_PORT that will be 9001
or check for the WLS_FORMS_PORT in the portlist.ini file.
Also are you getting any exception in the Java console.?

How can I uninstall a damaged installation of Fusion - PFRD 11.1.1.6.0 - Oracle Portal, Forms, Reports and Discoverer

Hello,
I am upgrading EBS 11i to 12i, Discoverer 4 to 11. After completing ebs installation and upgrade successfully, I am now working on the Oracle Fusion piece of the upgrade.
I have installed
1. JDK
2. Repository Creation Utility - RCU (schema)
3. Weblogic - WLS 10.3.6
4. Oracle Fusion - Discoverer 11g Release 1 Patchset 1 11.1.1.2.0 PFRD
5. Oracle Portal, Forms, Reports and Discoverer 11g Patchset 11.1.1.6.0 - Patchset 13517084
6. Executed config.sh and it failed with but continued.
During the Configuration of Oracle Fusion with config.sh there was failure at with "fails at creating data sources" and accidentally proceeded and all seem to go well until after shutting down the servers when Weblogic Managed Server is unable to start.
The start log indicated: "weblogic.store.PersistentStoreFatalException: [Store:280105]The persistent file store "_WLS_WLS_DISCO" cannot open file _WLS_WLS_DISCO000000.DAT." and I have been unable to find a solution for this error?
See log file error at https://dl.dropboxusercontent.com/u/15497130/oracle/ebs11/startManagedWebLogic.sh_nohup.out
If re-installation is my only option, then what are the steps to uninstall, and which components do I have to uninstall given that I had upgraded all the schemas involved?
Mathias

Hey,
You can always change the JDBC datasources in the Weblogic admin console . but have you recorded what is the specific error you got during the datasources creation .
I prefer...create a new user , give him sysdba privillages . Start RCU and create the DEV_DISCOVERER , DEV_DISCOVERER_PS schemas (prefix is your choice)
The Admin server will start . so go to admin console .
click services -> Data Sources
Check the data sources you have . edit each datasource and update the connection pool information .
after this you can start the Managed server WLS_DISCO
i believe this will solve this .........
if you still get issue again . you can try the link Using the WebLogic Persistent Store
Thanks
Naga

Install and config issues with Oracle Portal, Forms, Reports and Discoverer

For a while now I've been struggling with migrating a testing database to a newer version.
And right now I'm pretty much stuck at trying to configure Oracle Portal, Forms Reports and Discoverer
What I've got:
Windows server 2008 R2 64bit
Oracle 11g database
Java 6u27 64bit
JDK 1.6 64bit (using this after 1.7 ended up throwing out bugs while trying to start a weblogic server)
JDK 1.7 64bit
Weblogic 10.3.5 (or so i think - I've installed from the wls1035_generic.jar from the oracle website)
PFRD 11.1.1.2 with 11.1.1.3 installed over it, installed without config
and a hanging up configuration
Basically I've been trying to install PFRD (only forms, reports and enterprise manager from it actually) but it kept failing once it got to the configuration stage, so I installed without config, applied 11.1.1.3 and now trying to run the config manually with the good old \bin\config.bat
Result - the config froze for approx.18 hours then failed
There isn't much useful info I could deduct from the logs, mostly just says one or more configuration parts failed. At one place it mentions trying to set up a domain and starting up an adminserver for it - and apparently that's where it hangs up and finally times out and fails.
I'm a little clueless what to do about it as the logs don't say anything else of use I could understand. Any ideas there?

Trying the step by step, the only difference between that and what i do seems to be the file copying (which I can't do - there is no windows\extra\ directory anywhere, the files mentionned seem to already be on their places and either only there, or exactly the same) and clistering
So far the news ain't good - the config process hangs on creating domain ->Step Creating Domain started
It isn't frozen per se - the process doesn't use up any processor time, memory consumption within bounds, it reacts to button clicks and all..it just doesn't do anything concerning the said domain
the last thing the .out file shows:
Creating a new AdminServer Object ...
AdminServer port is 7002
Starting the domain ...
LOADING DLL : E:\OracleDb\Middleware\develtools\install\config\\StartUtil64.dlland in the log:
[2011-09-08T11:57:03.456+02:00] [as] [NOTIFICATION] [] [oracle.as.install.engine] [tid: 14] [ecid: 0000J98U0KsFS8XLxuDCiW1EQ92r000005,0] Setting >valueOf(DOMAIN_PORT) to:7002. Value obtained from:USERit's the same it did last time, when after 18hours it woke up with .out saying:
oracle.as.provisioning.util.ConfigException:
Error while starting the domain.
Cause:
An error occurred while starting the domain.
Action:
See logs for more details.
     at oracle.as.provisioning.util.ConfigException.createConfigException(ConfigException.java:123)
     at oracle.as.provisioning.weblogic.ASDomain.startDomain(ASDomain.java:3173)
     at oracle.as.provisioning.weblogic.ASDomain.startDomain(ASDomain.java:3033)
     at oracle.as.provisioning.engine.WorkFlowExecutor._startAdminServer(WorkFlowExecutor.java:1644)
     at oracle.as.provisioning.engine.WorkFlowExecutor._createDomain(WorkFlowExecutor.java:634)
     at oracle.as.provisioning.engine.WorkFlowExecutor.executeWLSWorkFlow(WorkFlowExecutor.java:390)
     at oracle.as.provisioning.engine.Config.executeConfigWorkflow_WLS(Config.java:866)
     at oracle.as.install.classic.ca.standard.StandardWorkFlowExecutor.execute(StandardWorkFlowExecutor.java:65)
     at oracle.as.install.classic.ca.standard.AbstractProvisioningTask.execute(AbstractProvisioningTask.java:26)
     at oracle.as.install.classic.ca.standard.StandardProvisionTaskList.execute(StandardProvisionTaskList.java:61)
     at oracle.as.install.classic.ca.ClassicConfigMain.doExecute(ClassicConfigMain.java:124)
     at oracle.as.install.engine.modules.configuration.client.ConfigAction.execute(ConfigAction.java:335)
     at oracle.as.install.engine.modules.configuration.action.TaskPerformer.run(TaskPerformer.java:87)
     at oracle.as.install.engine.modules.configuration.action.TaskPerformer.startConfigAction(TaskPerformer.java:104)
     at oracle.as.install.engine.modules.configuration.action.ActionRequest.perform(ActionRequest.java:15)
     at oracle.as.install.engine.modules.configuration.action.RequestQueue.perform(RequestQueue.java:63)
     at oracle.as.install.engine.modules.configuration.standard.StandardConfigActionManager.start(StandardConfigActionManager.java:158)
     at oracle.as.install.engine.modules.configuration.boot.ConfigurationExtension.kickstart(ConfigurationExtension.java:81)
     at oracle.as.install.engine.modules.configuration.ConfigurationModule.run(ConfigurationModule.java:83)
     at java.lang.Thread.run(Thread.java:619)
Caused by: oracle.as.provisioning.util.ConfigException:
Error while starting the domain.
Cause:
Starting the Admin_Server timed out.
Action:
See logs for more details.
     at oracle.as.provisioning.util.ConfigException.createConfigException(ConfigException.java:123)
     at oracle.as.provisioning.weblogic.ASDomain.startDomain(ASDomain.java:3143)
     ... 18 more
oracle.as.provisioning.exception.ASProvisioningException
     at oracle.as.provisioning.engine.Config.executeConfigWorkflow_WLS(Config.java:872)
     at oracle.as.install.classic.ca.standard.StandardWorkFlowExecutor.execute(StandardWorkFlowExecutor.java:65)
     at oracle.as.install.classic.ca.standard.AbstractProvisioningTask.execute(AbstractProvisioningTask.java:26)
     at oracle.as.install.classic.ca.standard.StandardProvisionTaskList.execute(StandardProvisionTaskList.java:61)
     at oracle.as.install.classic.ca.ClassicConfigMain.doExecute(ClassicConfigMain.java:124)
     at oracle.as.install.engine.modules.configuration.client.ConfigAction.execute(ConfigAction.java:335)
     at oracle.as.install.engine.modules.configuration.action.TaskPerformer.run(TaskPerformer.java:87)
     at oracle.as.install.engine.modules.configuration.action.TaskPerformer.startConfigAction(TaskPerformer.java:104)
     at oracle.as.install.engine.modules.configuration.action.ActionRequest.perform(ActionRequest.java:15)
     at oracle.as.install.engine.modules.configuration.action.RequestQueue.perform(RequestQueue.java:63)
     at oracle.as.install.engine.modules.configuration.standard.StandardConfigActionManager.start(StandardConfigActionManager.java:158)
     at oracle.as.install.engine.modules.configuration.boot.ConfigurationExtension.kickstart(ConfigurationExtension.java:81)
     at oracle.as.install.engine.modules.configuration.ConfigurationModule.run(ConfigurationModule.java:83)
     at java.lang.Thread.run(Thread.java:619)
Caused by: oracle.as.provisioning.exception.ASProvWorkflowException: Error Executing workflow.
     at oracle.as.provisioning.engine.WorkFlowExecutor._createDomain(WorkFlowExecutor.java:685)
     at oracle.as.provisioning.engine.WorkFlowExecutor.executeWLSWorkFlow(WorkFlowExecutor.java:390)
     at oracle.as.provisioning.engine.Config.executeConfigWorkflow_WLS(Config.java:866)
     ... 13 more
progress in calculate progress4
progress in calculate progress4
oracle.as.provisioning.exception.ASProvisioningException
     at oracle.as.provisioning.engine.Config.executeConfigWorkflow_WLS(Config.java:872)
     at oracle.as.install.classic.ca.standard.StandardWorkFlowExecutor.execute(StandardWorkFlowExecutor.java:65)
     at oracle.as.install.classic.ca.standard.AbstractProvisioningTask.execute(AbstractProvisioningTask.java:26)
     at oracle.as.install.classic.ca.standard.StandardProvisionTaskList.execute(StandardProvisionTaskList.java:61)
     at oracle.as.install.classic.ca.ClassicConfigMain.doExecute(ClassicConfigMain.java:124)
     at oracle.as.install.engine.modules.configuration.client.ConfigAction.execute(ConfigAction.java:335)
     at oracle.as.install.engine.modules.configuration.action.TaskPerformer.run(TaskPerformer.java:87)
     at oracle.as.install.engine.modules.configuration.action.TaskPerformer.startConfigAction(TaskPerformer.java:104)
     at oracle.as.install.engine.modules.configuration.action.ActionRequest.perform(ActionRequest.java:15)
     at oracle.as.install.engine.modules.configuration.action.RequestQueue.perform(RequestQueue.java:63)
     at oracle.as.install.engine.modules.configuration.standard.StandardConfigActionManager.start(StandardConfigActionManager.java:158)
     at oracle.as.install.engine.modules.configuration.boot.ConfigurationExtension.kickstart(ConfigurationExtension.java:81)
     at oracle.as.install.engine.modules.configuration.ConfigurationModule.run(ConfigurationModule.java:83)
     at java.lang.Thread.run(Thread.java:619)
Caused by: oracle.as.provisioning.exception.ASProvWorkflowException: Error Executing workflow.
     at oracle.as.provisioning.engine.WorkFlowExecutor._createDomain(WorkFlowExecutor.java:685)
     at oracle.as.provisioning.engine.WorkFlowExecutor.executeWLSWorkFlow(WorkFlowExecutor.java:390)
     at oracle.as.provisioning.engine.Config.executeConfigWorkflow_WLS(Config.java:866)
     ... 13 more
Going to execute executeAfterConfig
java.lang.IllegalStateException: Action:Application Configuration failed with error:Configure Classic Failed.
     at oracle.as.install.engine.modules.configuration.client.ConfigAction.fail(ConfigAction.java:227)
     at oracle.as.install.classic.ca.ClassicConfigMain.doExecute(ClassicConfigMain.java:129)
     at oracle.as.install.engine.modules.configuration.client.ConfigAction.execute(ConfigAction.java:335)
     at oracle.as.install.engine.modules.configuration.action.TaskPerformer.run(TaskPerformer.java:87)
     at oracle.as.install.engine.modules.configuration.action.TaskPerformer.startConfigAction(TaskPerformer.java:104)
     at oracle.as.install.engine.modules.configuration.action.ActionRequest.perform(ActionRequest.java:15)
     at oracle.as.install.engine.modules.configuration.action.RequestQueue.perform(RequestQueue.java:63)
     at oracle.as.install.engine.modules.configuration.standard.StandardConfigActionManager.start(StandardConfigActionManager.java:158)
     at oracle.as.install.engine.modules.configuration.boot.ConfigurationExtension.kickstart(ConfigurationExtension.java:81)
     at oracle.as.install.engine.modules.configuration.ConfigurationModule.run(ConfigurationModule.java:83)
     at java.lang.Thread.run(Thread.java:619)
In Config Module Finish Event...and the log continuing with some variable setting notifications and this:
[2011-09-08T08:27:45.272+02:00] [as] [ERROR] [] [oracle.as.install.engine.modules.configuration.standard.StandardConfigActionManager] [tid: 14] [ecid: >0000J93lRQOFS8XLxuDCiW1EPpn_000005,0] One or More configurations failed. Exitingthen again more traces and notifications until the end marking config as failed
I'm kinda paranoid about the double backslash in the dll path, but other than that no clue as to why the domain doesn't set up
the other link you mentionned seems to have no relevance yet
does that clear up anything for you though?
..can the lack of SOA suite have anything to do with the problem?

Step by step installation of Oracle Portal, Forms, Reports and Discoverer

Hi all
i m using Oracle Enterprise Linux 5. can any one plz tell me step by step installation of Oracle Portal, Forms, Reports and Discoverer?
i watched some tutorials but didnt find any thing. did i need any pre-installation for Oracle Portal, Forms, Reports and Discoverer on Linux?
Regards
Saqib

Dear Saqib Alam ,
Hope you are fine, and also you have completed the PORTAL installation successfully.
Can you kindly share me the methods you have went..
can you clearly explain us by this OTN, it will be a great Knowledge Sharing for Apps DBA like us.
1) what are the softwares we have to download for the Portal 11g
2) if possible Step by step installation method.
Thanks in advance,
Abdul Hameed

Portal, Forms, Reports and Discoverer - Error in Final Setup

I have followed multiple setup instructions now to try and get Forms working on my local machine.
Including the following:
Forms 11g - Installation steps for a developer machine
I have done the following on a Windows 7 64bit Setup:
Installed Oracle 11g Database
Installed Weblogic 64 bit using the wls1033_generic.jar with a 64 bit JDK
Installed Portal, Forms, Reports and Discoverer, but when I get to the last stage where it goes through steps they all end up as failed and I can get no further, what would cause this?

Check this thread when installing forms 11.1.1.3: Re: Install Forms & Rpts 11.1.1.3 with WebLogic Server 10.3.3 on Win32

Portal, Forms, Reports and discover 11g

Hi,
When setting up the version 11.1.1.3.0_32 within WinXP, I've got
INST-07010: Validation of Oracle Home location failed. The location specified does not exist.
Enter a valid existing directory
INST-07100: The Oracle home provided does not contain Oracle Portal 11.1.1.2.0.
In order to patch your existing version please provide an Oracle home that contains the product mentioned above. If you choose to continue, only the oracle_common directory and any components that both products have in common will be patched.
INST-07293: Middleware home location specified does not have the required Oracle homes installed in it. The Oracle homes for the following components is not installed oracle.classicwls.top.
Provide a different Middleware home location or install the required Oracle Products and try the install again
Best Regards

CraigB wrote:
I think I did not missed anythingYes, I've heard this before and after a long forum conversation it turned out that a step was missed. When you installed ofm_pfrd_win_11.1.1.3.0_32_disk1_1of1 did you install WebLogic Server (10.3.3) first? If not, then you definately missed a step. Oracle Fusion Middleware (FMw) requires the installation of the WebLogic Server (WLS) first. When you install WLS you have to skip the domain configuation step because the FMw installation will perform the configuruation for you.
Oracle is in the process of creating a "lighter" install for FMw, but I am not aware that this has been released yet. This lighter install will (as I understand it) include a WLS runtime similar to the OC4J servlet used by Oracle Developer Suite 10g.
So, like I said, could you please list for us the steps you followed when installing FMw?
Craig...I was just reading the forum and I see that ! GREAT NEWS !!!! our standalone OC4J will now become a WLS standalone !
That will save hours and hours of installation process !
I'm waiting for that since 11g has been released !
Jean-Yves

Problems installing OBIEE 11g on Windows Server 2008 64 bit

Hi, I'm trying to install OBIEE 11g on Windows Server 2008 64 bit (standard edition, SP2), and it's blowing up running the installer. The installer gets past the first couple of "info" screens, but blows up prior to coming to the first "real" screen with an error:
Microsoft Visual C++ Assertion Failed:
Program: ...
File: ../../../src/share/native/sun/font/t2k/t2kstrm.c
Line: 132
Expression: pos <= t->maxPos
Has anyone seen this and/or have an idea how to work around this? Note that I did do the prerequisite download / install of the 2005 Visual C++ 64 bit libraries.
Thanks,
Scott

Just to close the loop on this thread, this does indeed seem to be some sort of font / java issue on our servers. I've been completely unable to get the install to work using the GUI. However, if I run it from command line using the -silent and -response paramaters along with a proper response file, the install went perfectly. I'm going to continue working the SR with Oracle - don't want to be stuck using -silent mode when things get more complicated, but at least now I can move forward.
If anyone else has a better workaround - please let me know. "Silent" mode is workable, but difficult and time consuming.
Thanks,
Scott

While using oracle forms 6i and database 11g in windows 7, the application getting closed while working on some forms

Hi,
Please advise on the below issue.
While using oracle forms 6i and database 11g in windows 7, the application getting closed while working on some forms.
May i know what is to be done?

MoNo wrote:
Hi Friends...
I'm using windows7 32 bit.
<snip>First, please be aware that oracle products are NOT certified to run on ANY 'home' edition of ANY version of Windows.
Second, did you read the instructions on the page where you downloaded the software -- specifically the part about unzipping TWO downloaded zip files into the SAME directory?
Third, did you read and heed the installation guide, or did you just go straight to 'setup.exe'?

When will Oracle 10g/11g support Windows Server 2008 and AIX6.1

Hi all
I'm sorry if I post it in a wrong place... But I really want to know when will Oracle 10g/11g support Windows Server 2008 and AIX 6.1?
I've searched in metalink but found nothing useful. Is there anybody can give me a link of Oracle's roadmap for platform support?
Thanks!

Oracle does not announce release dates and neither
does any other software company.But Oracle does have a very good track record of supporting their products on new windows releases extremely close to the windows release date. Clearly they can't support on an unreleased platform though. Given that the launch of Server 2008 isn't even complete worldwide yet (19th March in the UK for example) it would seem that this enquiry is a little premature.
Niall Litchfield
http://www.orawin.info/

Problem after installing OracleAS portal on DHCP machine.

Hi
I'm currently running Windows Server 2003 R2 on VmWare, and have installed OracleAS portal on a DHCP machine. However it has been causing me problems, and I realized I have overlooked the system requirements (Section 4.2) by not installing a loopback adaptor prior to the installation.
Now, my portal server goes down whenever the IP addresses changes and I'm at a loss on what to do. I have installed my portal on the following IP config details:
IP address: 10.0.1.105
Subnet Mask: 255.255.248.0
Default Gateway: 10.0.0.1
However the recommendations (on the documentation Section 4.8.6.3) were for me to use the following IP config details:
IP address: 10.10.10.10 (or 192.168.x.x) [x is any value between 1 and 255]
Subnet mask: 255.255.255.0
Thus even if I have followed the instructions on Section 4.8.6.3 (after I have installed the portal) - The server won't be running because the host is still on 10.0.1.105. What happened after my IP changed was error pages that ranges from:
- 505 Server Down
- The connection timed-out
This my first time installing an Oracle Product, and I'm new to networks so I would really appreciate any help and advice on this problem I'm facing. I'm not sure what other details that I need to give for you to effectively help me solve this problem. Please help.
Thanks!!

The 2gb partition i talked about it's the one given by using INTERNET RECOVERY, so, it seems that i do not have any recovery partition in my mac, so, problem resumes to restoring system by the last copy in time machine which is not showing in internet recovery, but it does shows in my user account.
Thanks for help!

How to deploy Forms, Reports and Menu from Client to Server machine

Dear Experts,
I have one requirement to deploy the Forms, Reports and Menu from client machine to server machine.
Deployment involves the following steps :
1. Firstly we have to search the selected file in a folder where the .fmx is present ( in Server machine) and take the back up of the the existing file in the server (Source and destination paths will be available).
Ex. If the existing FMB name is TEST.fmx then the backup file should be TEST_sysdate.fmx.
2. Secondly we have to transfer the file from the client folder (or from another folder of the same server) to the server folder where the back up exists.
Please help me to search/rename/copy/replace the _.fmx/.rdf/.rep/.mmx_ files from client to server.
We are using
9i Database.
10g Forms and reports.
SQL Developer tool.
OS is Windows (Client and Server).
Help me out to attach a file of front end screen which we are planning to develop. It will give a clear picture on this requirement.
Thanks :)
Edited by: 941175 on Jun 17, 2012 9:09 AM
Edited by: 941175 on Jun 17, 2012 9:12 AM
Edited by: 941175 on Jun 17, 2012 9:14 AM

941175
Welcome to the forum. Please take a while to go through the FAQ to be found to the top right of the page.
Your issue is more to do with batch files rather than Forms. The only relation with Forms, as I see it, is that you will be using HOST/CLIENT_HOST to start a batch file with the file name to be deployed as a parameter passed to it.
You need to rewrite either a CMD batch file or a Powershell script to achieve what have set out to do.
For CMD batch files look up http://www.robvanderwoude.com/battech.php , or any of the other excellent resources available on the internet.
Regards,

HOW TO INSTALL ODI 11g / OWB 11g IN WINDOWS SERVER 2008 R2 (64 BITS)

Hi everybody,
I have a serious problem.
Last week we buy a new server with Windows Server 2008 Std. R2 x64, for a new project. I tried to install the RDBMS Oracle 11g R2 (x64) without problems, but when i try execute the "Design Center" contents in OWB, show me the error: 0xc0000018
Then, I´m thinking in install Oracle Data Integrator to solution it, but i`ve read that neither can install on 64 bits system... This is true?
Somebdoy knows how can I install OWB 11g / ODI 11g in a Windows 2008 Server 64 bits?
Thanks & Regards!

OWB 11G Will have been installed with the database, it now ships with 11G.
Check you are on a supported platform for design centre using the certification matrix.
Quick google search for you regards 0xc0000018 :
Problem in Lunching OWB Design Center

Having problem to install Oracle Portal Forms Reports and Discoverer 11g on Windows Server 2008 64 bit

Similar Messages

Maybe you are looking for