Having problem with dead key in Leopard
Hello. I'm having problem with dead key in Leopard.
In Tiger it was working, but in Leopard dead key "'" doesn't work.
In Tiger I could use OPTION key as well to get Latvian special characters (both worked - OPTION Key and dead-key), but in LEOPARD OPTION key is the only possibility to get these characters.
How can I get dead key "'" working?
I'm using Latvian language with Latvian keyboard layout.
Here are images how it looked in Tiger:
1) Before dead key is pressed:
http://amerix.no-ip.org/tmp/1.tiff
2) After dead key is pressed:
http://amerix.no-ip.org/tmp/2.tiff
ok, i got answer
so - first problem was that ukelele didn't work in leopard (it wasn't possible to start new layout), but it was possible to edit Tom Gewecke posted layout.
There it is possible to change every thing (dead-key as well).
So I edited it and now i have layout where dead-key works -
http://amerix.no-ip.org/tmp/LatvianT.keylayout
Just do what Tom Gewecke said with this layout. It should work!
Similar Messages
-
I'M HAVING PROBLEM WITH FUNCTION KEY, I'M HAVING PROBLEM WITH FUNCTION KEY
Hello everybody
Recently i'm having problem with function key of iphone4, now its working assistive touch key board , between these days i had restored and update then it work for next 12 hour after that it again stoped..
pls help me from this isssue,
thanking you.There are no function keys on the iPhone.
Please clearly state the issue that is occurring. -
Still Having Problem With WEP Key
Hi:
I have been reading this forum and looking for WEP related topic however I still haven't solved my problem. So here is my problem and see if anyone from this forum can help.
I set my linksys to make WEP key mandatory. I used 128 bit key and was able to generate 104 bit key (26 hex digits). It works fine on my wife laptop (COMPAQ), it can communicate using this key. However it never works on my IBM/Lenovo T43P. The only difference is I am running Funk/Juniper Odyssey Client Manager software. Yes I have entered the 26 hex key properly and still doesn't work. It does work however if I disable the WEP key. Any idea what the problem is?
I took my laptop to my brothers house who is using DLINK router and use a different WEP and it works fine. So it seems like this WEP key doesn't work with my Linksys router. By the way my Linksys router is BEFW11S4.
Thanks,
JimIf your one laptop is already working iwth same 28bits WEP key ..... i dont think so that there is any issue with router ......
You can configure the Odyssey Client Manager as per the settings in the router ....
Still if you want you can use WEP 64 bits key on the router ...check on both the laptops if they are able to access interent ..... -
Having problems with key chain password
I just got my mac book yesterday, and I'm having problems with my keychain password.
My keychain password is not the same as my login password, it won't accept it, so i think i made a typing error.
Each time i go on to safari, it asks for the password, which i don't have. i've tried the key chain first aid, and that still doesn't work. I've also tried keychain access, and that also doesn't work as it asks for the password first!
Is there a way that i can reset it?There are user passwords and Administrator passwords. The only way to check your keychain password is to be the administrator. In an effort to secure my MacBook, I have an administrator account that I don't use at all and I have a user account that is all I use. It is a great way to protect your MacBook info from others.
As to your question, passwords are case sensitive. You can try to change the password by inserting the CD's that came with your MacBook and reset the password. Seeing that you just got it yesterday, you probably don't have much personal information on it yet, you could use disk utility from the CD and reinstall the Operating System.
Good Luck.
Adam -
I was thinking of downloading Maverick, but I am seeing that Skype is having problems with it. Is this still true. I am on snow leopard 10.6.8 now
Hi,
I'm using Mavericks and there are no issues with SKYPE.
I using SKYPE 6.9 and this version is working well without issue.
For some reason I didn't downloaded SKYPE 6.11 I don't know why anymore ... but I'm sure I hat my reasons not to do so.
Dimaxum -
Having problem with Snow Leopard
I updated my mac today using Snow Leopard and now I'm having problem with amsn ans Cyberduck.. Is there anyway to have this fixed?
HI,
The most recent version of Cyberduck is here but it *may not be* compatible with Snow Leopard.
http://www.apple.com/downloads/macosx/internet_utilities/cyberduck.html
Read where you see; System Requirements
You can go to the developer's site and check for updates.
http://cyberduck.ch/
Carolyn
Message was edited by: Carolyn Samit -
I'm having problem with my iphone4S first when i updated software to 7.1 after a month or so wifi turned grayed, second when i tried to turn off in the night as soon as i turn it on battery empty now its totaly dead. What should i do with it?
1) This is because of software version 1.1. See this
thread for some options as to how to go back to 1.0,
which will correct the problem...
http://discussions.apple.com/thread.jspa?threadID=3754
59&tstart=0
2) This tends to happen after videos. Give the iPod a
minute or two to readjust. It should now be more
accurate.
3) This?
iPod shows a folder icon with exclamation
point
4) Restore the iPod
5) Try these...
iPod Only Shows An Apple Logo and Will Not Start
Up
iPod Only Shows An Apple Logo
I think 3,4, and 5 are related. Try the options I
posted for each one.
btabz
I just noticed that one of the restore methods you posted was to put it into Disk Mode First rather than just use the resstore straight off, I Have tried that and seems to have solved the problem, If it has thank you. previously I have only tried just restoring it skipping this extra step. Hope my iPod stays healthy, if it doesnt its a warrenty job me thinks any way thanks again -
I have been having problems with my iPod touch and my WRT...
I have been having problems with my iPod touch and my WRT54G router. I am so frustrated right now because after following the various steps mentioned in one of these threads, following Earthlink's prompts, and speaking with Apple, my iPod touch will still not work. It is connected to the internet but will not download the pages. It is quite frustrating. I have changed from WPA to WEP, I switched the 4th Generated key to the 1st. I've disabled this, enabled that. I've done just about everything. I updated the firmware. I made the switch from a partial bridge to a full bridge. Still nothing seems to work. Does anyone have any other suggestions? The one thing I have not done is enter the Apple code into the iPod which searches for website...-- I cannot access the internet with my iPod so this web address does not work. If anyone has been successful, will you please give me step by step instructions? Yesterday I was on the phone with Linksys for about an hour. Before that with Apple for about an hour and before that with Earthlink. How it is that I can walk into a Bread Co. or Apple Store and immediately connect to the internet with my iPod but I can't in my own house?? Everyone seems to think it is someone else's problem so I've gone around and around. Not one of the Linksys support personnel suggested I look here on this community forum. I had to pay the $9 fee to have advanced Linksys help but still my iPod does not work and when I called back, the man I spoke with seemed to think the case was closed because my PC, Laptop, and iPod are connected to the internet -- the iPod just won't download the webpages or get mail. My iPod's IP address begins with 192. I would appreciate any help on this matter
Message Edited by AlliW on 10-02-2008 02:06 PMI had the same issues with my iPod touch & iPhone. It's a known issue with the touch & Linksys G routers. Go into settings on the touch & do the following.
1. Settings - wifi - linksys
2. Erase your DNS settings & input same numbers as in router
Settings.
3. Http proxy should be
in off position.
4. Close out & open safari you should now have a wireless
connection. -
Mapping problem with compressed key update record (target format)...
Hi Guys,
Getting below error while replication from Source to target. Source table is having NOT NULL Column, but on target replicat process giving error about some NULL value ??
How to overcome this issue, any idea...
2011-08-04 10:35:04 INFO OGG-00995 Oracle GoldenGate Delivery for Oracle, rmastrk.prm: REPLICAT RMASTRK starting.
2011-08-04 10:35:05 INFO OGG-00996 Oracle GoldenGate Delivery for Oracle, rmastrk.prm: REPLICAT RMASTRK started.
2011-08-04 10:35:06 WARNING OGG-00869 Oracle GoldenGate Delivery for Oracle, rmastrk.prm: OCI Error ORA-01407: cannot update ("INFRA"."CUST"."CODE") to NULL (status = 1407), SQL <UPDATE "INFRA"."CUST" SET "ORD_ID" = :a2,"DP_ID" = :a3,"EXCHNG_CODE" = :a4,"ORD_QTY" = :a5,"ORD_PRICE" = :a6,"CODE" = :a7,"MKRT_CODE" = :a8,"CHANN>.
2011-08-04 10:35:06 WARNING OGG-01004 Oracle GoldenGate Delivery for Oracle, rmastrk.prm: Aborted grouped transaction on 'INFRA.CUST', Database error 1407 (ORA-01407: cannot update ("INFRA"."CUST"."SCRP_CODE") to NULL).
2011-08-04 10:35:06 WARNING OGG-01003 Oracle GoldenGate Delivery for Oracle, rmastrk.prm: Repositioning to rba 44132192 in seqno 68708.
2011-08-04 10:35:06 *WARNING OGG-01154 Oracle GoldenGate Delivery for Oracle, rmastrk.prm: SQL error 1407 mapping INFRA.CUST to INFRA.CUST OCI Error ORA-01407:* *cannot update ("INFRA"."CUST"."SCRP_CODE") to NULL (status = 1407), SQL <UPDATE "INFRA"."CUST" SET "ORD_ID" = :a2,"DP_ID" = :a3,"EXCHNG_CODE"=:a4,"ORD_QTY"*
*= :a5,"ORD_PRICE" = :a6,"SCRP_CODE" = :a7,"MKRT_CODE" = :a8,"CHANN>.*
2011-08-04 10:35:06 WARNING OGG-01003 Oracle GoldenGate Delivery for Oracle, rmastrk.prm: Repositioning to rba 44132192 in seqno 68708.
2011-08-04 10:35:06 ERROR OGG-01296 Oracle GoldenGate Delivery for Oracle, rmastrk.prm: Error mapping from INFRA.CUST to INFRA.CUST.
2011-08-04 10:35:06 ERROR OGG-01668 Oracle GoldenGate Delivery for Oracle, rmastrk.prm: PROCESS ABENDING.
Oracle GoldenGate Delivery for Oracle process started, group RMASTRK discard file opened: 2011-08-04 10:35:05
Current time: 2011-08-04 10:35:06
Discarded record from action ABEND on error 1407
OCI Error ORA-01407: cannot update ("INFRA"."CUST"."SCRP_CODE") to NULL
(status = 1407), SQL <UPDATE "INFRA"."CUST" SET "ORD_ID" = :a2,"MKRT_CODE" = :a8,"CHANN>
Aborting transaction on ./dirdat/pm beginning at seqno 68708 rba 44132192
error at seqno 68708 rba 44132192
Problem replicating INFRA.CUST to INFRA.CUST
*Mapping problem with compressed key update record (target format)...*
ORD_QTY = 500
ORD_PRICE = 37430
SCRP_CODE =
MKRT_CODE = N
Oracle GoldenGate Delivery for Oracle process started, group RMASTRK discard file opened: 2011-08-
04 10:35:05
Current time: 2011-08-04 10:35:06
Discarded record from action ABEND on error 1407
OCI Error ORA-01407: cannot update ("INFRA"."CUST"."SCRP_CODE") to NULL
(status = 1407), SQL <UPDATE "INFRA"."CUST" SET "ORD_ID" = :a2,"MKRT_CODE" = :a8,"CHANN>
Aborting transaction on ./dirdat/pm beginning at seqno 68708 rba 44132192
error at seqno 68708 rba 44132192
Problem replicating INFRA.CUST to INFRA.CUST
Mapping problem with compressed key update record (target format)...
ORD_QTY = 500
ORD_PRICE = 37430
SCRP_CODE =
MKRT_CODE = N
Any inputs / help would be appreciated.
Regards,
ManishThe SCRP_CODE column has a NOT NULL constraint. The ORA-01407 error is telling you that you cannot update or set a value for this column to null because of the constraint. This has absolutely nothing to do with an index. You can use a marker/sentinel value in lieu of using NULL. For a numeric field, where everything is positive, a negative value (-1) can be decoded as meaning null. For a character field, a code such as NA can represent NULL.
This also has nothing to do (directly) with GoldenGate failing because of this error. The underlying SQL statement will fail everywhere, regardless of the tool or application. It is not a case of failing only in GoldenGate. -
I allowed a System Update that included a Xerox Printer update. I am running a MacPro 10.6.8 with Quark 8.5.1 and a Xerox ColorQube 8700S. EVERY was working perfectly before the "update" but afterwards anything sent to the printer from Quark would stall the printer. I went to the Xerox website and downloaded their Printer Driver and tried again. Now I could print from Quark but I can NOT get to the printer window to change the type of paper, etc. So, the problem still persists.
Should I try going into Time Machine and trying to find the Xerox Print Driver in the Library folder?
Should I upgrade the whole system software? (I wouldn't mind doing that AFTER I get this magazine off to the commerical printer)
Should I upgrade to Quark 9?
Any help here would be apprciated.
Thanks - RobAs a general rule of thumb, I never install updates until I read its info and I am having problems with my current software. I hide the updates until I need them. Usually this happens when I update or upgrade my os. I don't fix what ain't broken is my golden rule.
It is possible that you need to update or upgrade Quark in order for your newer printer driver to work. First I would try the following....
Disconnect all peripherals from your computer.
Boot from your install disc & run Repair Disk from the utility menu. To use the Install Mac OS X disc, insert the disc, and restart your computer while holding down the C key as it starts up.
Select your language.
Once on the desktop, select Utility in the menu bar.
Select Disk Utility.
Select the disk or volume in the list of disks and volumes, and then click First Aid.
Click Repair Disk.
Restart your computer when done.
Repair permissions after you reach the desktop-http://support.apple.com/kb/HT2963 and restart your computer.
If your printer does not work afterwards, update or upgrade Quark. If that does not work, contact the printer manufacturer. -
My wife has been having problems with Safari, and many third party software and malware programs infecting her Mac Book Pro. I have tried to reset Safari but it keeps coming back, taking over Safari, changing defaults, start pages, and search engines, Etc.
Is it safe to use programs like MacKeeper, who keeps send my wife's computer message and alerts, or should I just wipe the drive and start over?
SkipI am having lot's of lag time with Safari, etc..
I'll type in a website.. and it will take 15-20 seconds to start..
Start time: 17:51:37 12/02/14
Model Identifier: MacBookPro11,3
System Version: OS X 10.10.1 (14B25)
Kernel Version: Darwin 14.0.0
Time since boot: 14 days 3:02
USB
My Passport 07B8 (Western Digital Technologies, Inc.)
Diagnostic reports
2014-11-13 QuickLookSatellite crash x2
2014-11-21 com.apple.WebKit.Plugin.64 crash
Log
Nov 30 21:32:39 PM notification timeout (pid 345, Adobe CEF Helper)
Nov 30 21:32:39 PM notification timeout (pid 99018, CEPHtmlEngine)
Nov 30 21:32:39 PM notification timeout (pid 99019, CEPHtmlEngine He)
Dec 1 09:09:03 [[0xffffff802bfa4000] OpCode 0x0C01 (Set Event Mask) from: kernel_task (0) Synchronous status: 0x00 (kIOReturnSuccess) state: 2 (BUSY) timeout: 5000] Bluetooth warning: An HCI Req timeout occurred.
Dec 1 09:52:03 PM notification timeout (pid 266, Creative Cloud)
Dec 1 09:52:03 PM notification timeout (pid 346, Adobe CEF Helper)
Dec 1 09:52:03 PM notification timeout (pid 345, Adobe CEF Helper)
Dec 1 10:04:37 process WindowServer[114] caught causing excessive wakeups. Observed wakeups rate (per sec): 170; Maximum permitted wakeups rate (per sec): 150; Observation period: 300 seconds; Task lifetime number of wakeups: 12755007
Dec 1 10:31:08 ALF: ifnet_get_address_list_family error 12
Dec 1 10:59:17 process Meeting Center[2921] caught causing excessive wakeups. Observed wakeups rate (per sec): 647; Maximum permitted wakeups rate (per sec): 150; Observation period: 300 seconds; Task lifetime number of wakeups: 45104
Dec 1 12:24:35 process com.apple.WebKit[4567] caught causing excessive wakeups. Observed wakeups rate (per sec): 297; Maximum permitted wakeups rate (per sec): 150; Observation period: 300 seconds; Task lifetime number of wakeups: 76962
Dec 1 14:31:01 process com.apple.WebKit[7400] caught causing excessive wakeups. Observed wakeups rate (per sec): 397; Maximum permitted wakeups rate (per sec): 150; Observation period: 300 seconds; Task lifetime number of wakeups: 53188
Dec 1 14:43:52 process com.apple.WebKit[7400] caught causing excessive wakeups. Observed wakeups rate (per sec): 224; Maximum permitted wakeups rate (per sec): 150; Observation period: 300 seconds; Task lifetime number of wakeups: 150084
Dec 1 14:47:34 process com.apple.WebKit[7400] caught causing excessive wakeups. Observed wakeups rate (per sec): 332; Maximum permitted wakeups rate (per sec): 150; Observation period: 300 seconds; Task lifetime number of wakeups: 222103
Dec 1 15:03:29 process com.apple.WebKit[7400] caught causing excessive wakeups. Observed wakeups rate (per sec): 214; Maximum permitted wakeups rate (per sec): 150; Observation period: 300 seconds; Task lifetime number of wakeups: 370572
Dec 1 16:38:03 SIOCPROTODETACH_IN6: utun2 error=6
Dec 1 16:38:08 SIOCPROTODETACH_IN6: utun2 error=6
Dec 1 20:08:30 jnl: disk3s2: replay_journal: from: 112328704 to: 113115136 (joffset 0x3a38000)
Dec 1 20:08:30 jnl: disk3s2: journal replay done.
Dec 1 20:27:11 com.adobe.acc.AdobeCreativeCloud.75292.UUID: Service exited with abnormal code: 5
Dec 2 08:23:00 process com.apple.WebKit[11891] caught causing excessive wakeups. Observed wakeups rate (per sec): 161; Maximum permitted wakeups rate (per sec): 150; Observation period: 300 seconds; Task lifetime number of wakeups: 527508
Dec 2 09:29:37 firefox (map: 0xffffff80317c5960) triggered DYLD shared region unnest for map: 0xffffff80317c5960, region 0x7fff9ae00000->0x7fff9b000000. While not abnormal for debuggers, this increases system memory footprint until the target exits.
Dec 2 10:04:39 SIOCPROTODETACH_IN6: utun2 error=6
Dec 2 10:04:44 SIOCPROTODETACH_IN6: utun2 error=6
Dec 2 16:42:24 process com.apple.WebKit[26151] caught causing excessive wakeups. Observed wakeups rate (per sec): 153; Maximum permitted wakeups rate (per sec): 150; Observation period: 300 seconds; Task lifetime number of wakeups: 45002
Swap (MiB): 41556
Activity
Net: 210 in, 20 out (KiB/s)
Memory: kernel_task (UID 0) is using 1632 MB
kexts
com.cisco.kext.acsock (1.1.0)
com.wdc.driver.USB.64.10.9 (1.0.1)
Daemons
com.cisco.anyconnect.vpnagentd
com.oracle.java.JavaUpdateHelper
com.apple.installer.osmessagetracing
com.microsoft.office.licensing.helper
com.google.keystone.daemon
com.wdc.WDSmartWareService
com.oracle.java.Helper-Tool
com.adobe.fpsaud
com.wdc.SmartwareDriveService
Agents
com.adobe.AdobeCreativeCloud
com.zimbra.desktop
com.citrix.ServiceRecords
com.google.keystone.system.agent
com.apple.photostream-agent
com.genieo.completer.download
com.genieo.completer.update
com.cisco.anyconnect.gui
com.citrix.ReceiverHelper
com.citrix.AuthManager_Mac
com.citrix.FMDAgent.14800.UUID
com.oracle.java.Java-Updater
com.fiplab.MailTabProHelper
com.adobe.PDApp.AAMUpdatesNotifier.74724.UUID
com.citrixonline.GoToMeeting.G2MUpdate
com.apple.AirPortBaseStationAgent
com.microsoft.SyncServicesAgent
Startup items
/System/Library/StartupItems/ciscod/ciscod
/System/Library/StartupItems/ciscod/StartupParameters.plist
Bundles
/System/Library/Extensions/hp_fax_io.kext
- com.hp.kext.hp-fax-io
/System/Library/Extensions/hp_Inkjet1_io_enabler.kext
- com.hp.print.hpio.Inkjet1.kext
/System/Library/Extensions/hp_Inkjet4_io_enabler.kext
- com.hp.print.hpio.Inkjet4.kext
/System/Library/Extensions/hp_Inkjet8_io_enabler.kext
- com.hp.print.hpio.inkjet8.kext
/System/Library/Extensions/JMicronATA.kext
- com.jmicron.JMicronATA
/System/Library/Extensions/WD1394_64_109HPDriver.kext
- com.wdc.driver.1394.64.10.9
/System/Library/Extensions/WDUSB_64_109HPDriver.kext
- com.wdc.driver.USB.64.10.9
/Library/Extensions/hp_io_printerclassdriver_enabler.kext
- com.hp.hpio.hp-io-printerclassdriver-enabler
/Library/Internet Plug-Ins/AdobeAAMDetect.plugin
- com.AdobeAAMDetectLib.AdobeAAMDetect
/Library/Internet Plug-Ins/CitrixICAClientPlugIn.plugin
- com.citrix.citrixicaclientplugIn
/Library/Internet Plug-Ins/Flash Player.plugin
- N/A
/Library/Internet Plug-Ins/googletalkbrowserplugin.plugin
- com.google.googletalkbrowserplugin
/Library/Internet Plug-Ins/JavaAppletPlugin.plugin
- com.oracle.java.JavaAppletPlugin
/Library/Internet Plug-Ins/npg.plugin
- npg.graphon.com
/Library/Internet Plug-Ins/o1dbrowserplugin.plugin
- com.google.o1dbrowserplugin
/Library/Internet Plug-Ins/SharePointBrowserPlugin.plugin
- com.microsoft.sharepoint.browserplugin
/Library/Internet Plug-Ins/SharePointWebKitPlugin.webplugin
- com.microsoft.sharepoint.webkitplugin
/Library/Internet Plug-Ins/Silverlight.plugin
- com.microsoft.SilverlightPlugin
/Library/Internet Plug-Ins/SlingPlayer.plugin
- com.slingmedia.slingplayer.plugin.nspapi
/Library/PreferencePanes/Flash Player.prefPane
- com.adobe.flashplayerpreferences
/Library/PreferencePanes/FMDSysPrefPane.prefPane
- Citrix.FMDSysPrefPane
/Library/PreferencePanes/JavaControlPanel.prefPane
- com.oracle.java.JavaControlPanel
/Library/PreferencePanes/WDQuickViewPrefsPane.prefPane
- com.westerndigital.quickview.prefpanel
/Library/PreferencePanes/Zimbra.prefPane
- com.zimbra.prefpanel
/Library/ScriptingAdditions/Adobe Unit Types.osax
- N/A
Library/Address Book Plug-Ins/SkypeABDialer.bundle
- com.skype.skypeabdialer
Library/Address Book Plug-Ins/SkypeABSMS.bundle
- com.skype.skypeabsms
Library/Internet Plug-Ins/CitrixOnlineWebDeploymentPlugin.plugin
- com.citrixonline.mac.WebDeploymentPlugin
Library/Internet Plug-Ins/Google Earth Web Plug-in.plugin
- com.Google.GoogleEarthPlugin.plugin
Library/Internet Plug-Ins/WebEx.plugin
- com.webex.WebEx
Library/Internet Plug-Ins/WebEx.plugin/Contents/Resources
- com.webex.WebEx
Library/Internet Plug-Ins/WebEx64.plugin
- com.cisco_webex.plugin.gpc64
dylibs
/usr/lib/libaudioc.dylib
/usr/lib/libclipc.dylib
/usr/lib/libcs.dylib
/usr/lib/libdc.dylib
/usr/lib/libfilec.dylib
/usr/lib/libMonoPosixHelper.dylib
/usr/lib/libpbr.dylib
/usr/lib/libprintc.dylib
/usr/lib/libsc.dylib
/usr/lib/libSFFileMonitor.32.dylib
/usr/lib/libSFIPC.32.dylib
/usr/lib/libSFIPC.I.dylib
/usr/lib/libSFsqlite3.7.4.dylib
/usr/lib/libSFSyncEngine.I.dylib
/usr/lib/libupc.dylib
App extensions
it.bloop.airmail.beta10.Airmail-Today-Beta
it.bloop.airmail.beta10.Airmail-Composer-Beta
com.wunderkinder.wunderlistdesktop.sharingextension
com.wunderkinder.wunderlistdesktop.todayextension
com.readitlater.PocketMac.AddToPocketShareExtension
com.stylemac.instadesk.Photodesk-Feed
it.bloop.airmail.beta10.Airmail-Share-Beta
Apps
/Applications/Uninstall IM Completer.app
Contents of /Library/LaunchAgents/com.cisco.anyconnect.gui.plist (checksum 1087717482)
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>KeepAlive</key>
<dict>
<key>PathState</key>
<dict>
<key>/opt/cisco/anyconnect/gui_keepalive</key>
<true/>
</dict>
</dict>
<key>Label</key>
<string>com.cisco.anyconnect.gui</string>
<key>LimitLoadToSessionType</key>
<string>Aqua</string>
<key>ProgramArguments</key>
<array>
<string>open</string>
<string>--wait-apps</string>
<string>/Applications/Cisco/Cisco AnyConnect Secure Mobility Client.app</string>
</array>
</dict>
</plist>
Contents of /Library/LaunchAgents/com.citrix.AuthManager_Mac.plist (checksum 1591517921)
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>ServiceIPC</key>
<true/>
<key>MachServices</key>
<dict>
<key>com.citrix.AuthManager_Mac</key>
<true/>
</dict>
<key>Label</key>
<string>com.citrix.AuthManager_Mac</string>
<key>WaitForDebugger</key>
<false/>
<key>ProgramArguments</key>
<array>
<string>/usr/local/libexec/AuthManager_Mac.app/Contents/MacOS/AuthManager_Mac</ string>
</array>
<key>LimitLoadToSessionType</key>
<string>Aqua</string>
<key>Disabled</key>
<false/>
</dict>
</plist>
Contents of /Library/LaunchAgents/com.citrix.ReceiverHelper.plist (checksum 676087606)
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>Label</key>
<string>com.citrix.ReceiverHelper</string>
<key>RunAtLoad</key>
<true/>
<key>KeepAlive</key>
<dict>
<key>SuccessfulExit</key>
<false/>
</dict>
<key>WaitForDebugger</key>
<false/>
<key>ProgramArguments</key>
<array>
<string>/usr/local/libexec/ReceiverHelper.app/Contents/MacOS/ReceiverHelper</st ring>
</array>
<key>LimitLoadToSessionType</key>
<string>Aqua</string>
<key>Disabled</key>
<false/>
</dict>
</plist>
Contents of /Library/LaunchAgents/com.citrix.ServiceRecords.plist (checksum 1445213025)
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>ServiceIPC</key>
<true/>
<key>MachServices</key>
<dict>
<key>com.citrix.Beacons</key>
<true/>
<key>com.citrix.ServiceRecords</key>
<true/>
</dict>
<key>Label</key>
<string>com.citrix.ServiceRecords</string>
<key>RunAtLoad</key>
<true/>
<key>KeepAlive</key>
<true/>
<key>WaitForDebugger</key>
<false/>
<key>ProgramArguments</key>
<array>
<string>/usr/local/libexec/ServiceRecords.app/Contents/MacOS/ServiceRecords</st ring>
</array>
...and 8 more line(s)
Contents of /Library/LaunchAgents/com.oracle.java.Java-Updater.plist (checksum 3453356730)
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>Label</key>
<string>com.oracle.java.Java-Updater</string>
<key>ProgramArguments</key>
<array>
<string>/Library/Internet Plug-Ins/JavaAppletPlugin.plugin/Contents/Resources/Java Updater.app/Contents/MacOS/Java Updater</string>
<string>-bgcheck</string>
</array>
<key>StandardErrorPath</key>
<string>/dev/null</string>
<key>StandardOutPath</key>
<string>/dev/null</string>
<key>StartCalendarInterval</key>
<dict>
<key>Hour</key>
<integer>9</integer>
<key>Minute</key>
<integer>57</integer>
<key>Weekday</key>
<integer>3</integer>
</dict>
</dict>
...and 1 more line(s)
Contents of /Library/LaunchDaemons/com.cisco.anyconnect.vpnagentd.plist (checksum 2630047092)
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC -//Apple Computer//DTD PLIST 1.0//EN
http://www.apple.com/DTDs/PropertyList-1.0.dtd >
<plist version="1.0">
<dict>
<key>Label</key>
<string>com.cisco.anyconnect.vpnagentd</string>
<key>ProgramArguments</key>
<array>
<string>/opt/cisco/anyconnect/bin/vpnagentd</string>
<string>-execv_instance</string>
</array>
<key>KeepAlive</key>
<true/>
<key>RunAtLoad</key>
<true/>
<key>AbandonProcessGroup</key>
<true/>
<key>EnableTransactions</key>
<false/>
</dict>
</plist>
Contents of /Library/LaunchDaemons/com.wdc.SmartwareDriveService.plist (checksum 2733252498)
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>Label</key>
<string>com.wdc.SmartwareDriveService</string>
<key>Program</key>
<string>/Library/Application Support/WD SmartWare Services/SmartwareDriveService</string>
<key>RunAtLoad</key>
<true/>
<key>StandardErrorPath</key>
<string>/dev/null</string>
</dict>
</plist>
Contents of /Library/LaunchDaemons/com.wdc.WDSmartWareService.plist (checksum 1153517838)
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>Label</key>
<string>com.wdc.WDSmartWareService</string>
<!-- <key>Program</key>
<string>/Library/Application Support/WD SmartWare Services/SmartwareServerApp.app/Contents/MacOS/SmartwareServiceApp</string> -->
<key>ProgramArguments</key>
<array>
<string>/Library/Application Support/WD SmartWare Services/SmartwareServiceApp.app/Contents/MacOS/SmartwareServiceApp</string>
</array>
<key>RunAtLoad</key>
<true/>
<key>StandardErrorPath</key>
<string>/dev/null</string>
</dict>
</plist>
Contents of Library/LaunchAgents/com.genieo.completer.download.plist (checksum 1894818845)
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>Label</key>
<string>com.genieo.completer.download</string>
<key>ProgramArguments</key>
<array>
<string>/Users/USER/Library/Application Support/com.genieoinnovation.Installer/Completer.app/Contents/MacOS/Installer</ string>
<string>-trigger</string>
<string>download</string>
<string>-isDev</string>
<string>0</string>
<string>-installVersion</string>
<string>15886</string>
<string>-firstAppId</string>
<string>19340001</string>
</array>
<key>WatchPaths</key>
<array>
<string>/Users/USER/Downloads</string>
</array>
</dict>
</plist>
Contents of Library/LaunchAgents/com.genieo.completer.update.plist (checksum 2339121592)
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>Label</key>
<string>com.genieo.completer.update</string>
<key>ProgramArguments</key>
<array>
<string>/Users/USER/Library/Application Support/com.genieoinnovation.Installer/Completer.app/Contents/MacOS/Installer</ string>
<string>-trigger</string>
<string>update</string>
<string>-isDev</string>
<string>0</string>
<string>-installVersion</string>
<string>15886</string>
<string>-firstAppId</string>
<string>19340001</string>
</array>
<key>StartInterval</key>
<integer>86400</integer>
</dict>
</plist>
Contents of Library/LaunchAgents/com.microsoft.LaunchAgent.SyncServicesAgent.plist (checksum 3051698494)
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>KeepAlive</key>
<false/>
<key>Label</key>
<string>com.microsoft.SyncServicesAgent</string>
<key>OnDemand</key>
<false/>
<key>ProgramArguments</key>
<array>
<string>/Applications/Microsoft Office 2011/Office/SyncServicesAgent.app/Contents/MacOS/SyncServicesAgent</string>
</array>
</dict>
</plist>
Contents of Library/LaunchAgents/com.zimbra.desktop.plist (checksum 3676173668)
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple Computer//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>Label</key>
<string>com.zimbra.desktop</string>
<key>ProgramArguments</key>
<array>
<string>/Users/USER/Library/Zimbra Desktop/bin/zdesktop</string>
<string>start</string>
<string>-w</string>
</array>
-
Still having problems with VPN access
Hello!
I am having problems with my VPN clients getting access to the networks over a MPLS infrastruture. I can reach these resources form my Core network (172.17.1.0/24) and my Wifi (172.17.100.0/24) but not from my VPN network (172.17.200.0/24). From the VPN I can reach the Wifi network (which is behind a router) and the rule that allows that also allows access to the other networks but for some reason it is not working.
When I ping inside the core network from VPN I can connect and get responses. When I ping to the Wifi network, I can get responses and connect to resources there. A tracert to the wifi network shows it hitting the core switch (a 3750 stack) @ 172.17.1.1, then the Wifi router (172.17.1.3) and then the host. A tracert to a resource on the MPLS network from the VPN shows a single entry (the destination host) and then 29 time outs but will not ping that resource nor connect.
I've posted all the info I can think of below. Any help appreciated.
*** Here is a tracert from a core network machine to the resource we need on the MPLS:
C:\Windows\system32>tracert 10.2.0.125
Tracing route to **************** [10.2.0.125]
over a maximum of 30 hops:
1 1 ms <1 ms <1 ms 172.17.1.1
2 1 ms <1 ms <1 ms 172.17.1.10
3 5 ms 5 ms 5 ms 192.168.0.13
4 31 ms 30 ms 31 ms 192.168.0.5
5 29 ms 30 ms 29 ms 192.168.0.6
6 29 ms 29 ms 29 ms 192.168.20.4
7 29 ms 29 ms 29 ms RV-TPA-CRMPROD [10.2.0.125]
Trace complete.
172.17.1.10 is the mpls router.
**** Here is the routing table (sh ip route) from the 3750 @ 172.17.1.1
Gateway of last resort is 172.17.1.2 to network 0.0.0.0
S 192.168.30.0/24 [1/0] via 172.17.1.10
172.17.0.0/24 is subnetted, 3 subnets
S 172.17.200.0 [1/0] via 172.17.1.2
C 172.17.1.0 is directly connected, Vlan20
S 172.17.100.0 [1/0] via 172.17.1.3
172.18.0.0/24 is subnetted, 1 subnets
S 172.18.1.0 [1/0] via 172.17.1.10
S 192.168.11.0/24 [1/0] via 172.17.1.10
10.0.0.0/8 is variably subnetted, 4 subnets, 2 masks
S 10.2.0.0/24 [1/0] via 172.17.1.10
S 10.10.10.0/24 [1/0] via 172.17.1.10
S 10.20.0.0/24 [1/0] via 172.17.1.10
S 10.3.0.128/25 [1/0] via 172.17.1.10
S 192.168.1.0/24 [1/0] via 172.17.1.10
S* 0.0.0.0/0 [1/0] via 172.17.1.2
*** Here is the firewall config (5510):
ASA Version 8.4(1)
hostname RVGW
domain-name ************
enable password b5aqRk/6.KRmypWW encrypted
passwd 1ems91jznlfZHhfU encrypted
names
interface Ethernet0/0
nameif Outside
security-level 10
ip address 5.29.79.10 255.255.255.248
interface Ethernet0/1
nameif Inside
security-level 100
ip address 172.17.1.2 255.255.255.0
interface Ethernet0/2
shutdown
no nameif
no security-level
no ip address
interface Ethernet0/3
shutdown
no nameif
no security-level
no ip address
interface Management0/0
nameif management
security-level 100
ip address 172.19.1.1 255.255.255.0
management-only
banner login RedV GW
ftp mode passive
dns server-group DefaultDNS
domain-name RedVector.com
same-security-traffic permit inter-interface
same-security-traffic permit intra-interface
object network WiFi
subnet 172.17.100.0 255.255.255.0
description WiFi
object network inside-net
subnet 172.17.1.0 255.255.255.0
object network NOSPAM
host 172.17.1.60
object network BH2
host 172.17.1.60
object network EX2
host 172.17.1.61
description Internal Exchange / Outbound SMTP
object network Mail2
host 5.29.79.11
description Ext EX2
object network NETWORK_OBJ_172.17.1.240_28
subnet 172.17.1.240 255.255.255.240
object network NETWORK_OBJ_172.17.200.0_24
subnet 172.17.200.0 255.255.255.0
object network VPN-CLIENT
subnet 172.17.200.0 255.255.255.0
object-group service DM_INLINE_TCP_1 tcp
port-object eq www
port-object eq https
object-group network DM_INLINE_NETWORK_1
network-object object BH2
network-object object NOSPAM
object-group network VPN-CLIENT-PAT-SOURCE
description VPN-CLIENT-PAT-SOURCE
network-object object VPN-CLIENT
object-group network LAN-NETWORKS
network-object 10.10.10.0 255.255.255.0
network-object 10.2.0.0 255.255.255.0
network-object 10.3.0.0 255.255.255.0
network-object 172.17.100.0 255.255.255.0
network-object 172.18.1.0 255.255.255.0
network-object 192.168.1.0 255.255.255.0
network-object 192.168.11.0 255.255.255.0
network-object 192.168.30.0 255.255.255.0
object-group network VPN-POOL
network-object 172.17.200.0 255.255.255.0
object-group protocol DM_INLINE_PROTOCOL_1
protocol-object ip
protocol-object icmp
access-list Outside_access_in extended permit tcp any object-group DM_INLINE_NETWORK_1 eq smtp
access-list Outside_access_in extended permit tcp any object BH2 object-group DM_INLINE_TCP_1
access-list global_mpc extended permit ip any any
access-list Inside_access_in extended permit object-group DM_INLINE_PROTOCOL_1 any any
pager lines 24
logging enable
logging asdm informational
no logging message 106015
no logging message 313001
no logging message 313008
no logging message 106023
no logging message 710003
no logging message 106100
no logging message 302015
no logging message 302014
no logging message 302013
no logging message 302018
no logging message 302017
no logging message 302016
no logging message 302021
no logging message 302020
flow-export destination Inside 172.17.1.52 9996
mtu Outside 1500
mtu Inside 1500
mtu management 1500
ip local pool VPN 172.17.1.240-172.17.1.250 mask 255.255.255.0
ip local pool VPN2 172.17.200.100-172.17.200.200 mask 255.255.255.0
no failover
icmp unreachable rate-limit 1 burst-size 1
no asdm history enable
arp timeout 14400
nat (Inside,Outside) source static EX2 Mail2
nat (Inside,Outside) source static any any destination static NETWORK_OBJ_172.17.1.240_28 NETWORK_OBJ_172.17.1.240_28
nat (Inside,Outside) source static any any destination static NETWORK_OBJ_172.17.200.0_24 NETWORK_OBJ_172.17.200.0_24
nat (Inside,Outside) source static inside-net inside-net destination static NETWORK_OBJ_172.17.1.240_28 NETWORK_OBJ_172.17.1.240_28
nat (Inside,Outside) source static LAN-NETWORKS LAN-NETWORKS destination static VPN-POOL VPN-POOL
object network inside-net
nat (Inside,Outside) dynamic interface
object network NOSPAM
nat (Inside,Outside) static 5.29.79.12
nat (Outside,Outside) after-auto source dynamic VPN-CLIENT-PAT-SOURCE interface
access-group Outside_access_in in interface Outside
access-group Inside_access_in in interface Inside
route Outside 0.0.0.0 0.0.0.0 5.29.79.9 1
route Inside 10.2.0.0 255.255.255.0 172.17.1.1 1
route Inside 10.3.0.0 255.255.255.128 172.17.1.1 1
route Inside 10.10.10.0 255.255.255.0 172.17.1.1 1
route Inside 172.17.100.0 255.255.255.0 172.17.1.3 1
route Inside 172.18.1.0 255.255.255.0 172.17.1.1 1
route Inside 192.168.1.0 255.255.255.0 172.17.1.1 1
route Inside 192.168.11.0 255.255.255.0 172.17.1.1 1
route Inside 192.168.30.0 255.255.255.0 172.17.1.1 1
timeout xlate 3:00:00
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
dynamic-access-policy-record DfltAccessPolicy
aaa-server RedVec protocol ldap
aaa-server RedVec (Inside) host 172.17.1.41
ldap-base-dn DC=adrs1,DC=net
ldap-group-base-dn DC=adrs,DC=net
ldap-scope subtree
ldap-naming-attribute sAMAccountName
ldap-login-password *****
ldap-login-dn CN=Hanna\, Roger,OU=Humans,OU=WPLAdministrator,DC=adrs1,DC=net
server-type microsoft
aaa authentication ssh console LOCAL
http server enable
http 192.168.1.0 255.255.255.0 management
http 172.17.1.0 255.255.255.0 Inside
http 24.32.208.223 255.255.255.255 Outside
snmp-server host Inside 172.17.1.52 community *****
snmp-server location Server Room 3010
snmp-server contact Roger Hanna
snmp-server community *****
snmp-server enable traps snmp authentication linkup linkdown coldstart warmstart
crypto ipsec ikev1 transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac
crypto ipsec ikev1 transform-set ESP-DES-SHA esp-des esp-sha-hmac
crypto ipsec ikev1 transform-set ESP-DES-MD5 esp-des esp-md5-hmac
crypto ipsec ikev1 transform-set ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac
crypto ipsec ikev1 transform-set ESP-3DES-MD5 esp-3des esp-md5-hmac
crypto ipsec ikev1 transform-set ESP-AES-256-SHA esp-aes-256 esp-sha-hmac
crypto ipsec ikev1 transform-set ESP-AES-128-SHA esp-aes esp-sha-hmac
crypto ipsec ikev1 transform-set ESP-AES-192-SHA esp-aes-192 esp-sha-hmac
crypto ipsec ikev1 transform-set ESP-AES-128-MD5 esp-aes esp-md5-hmac
crypto ipsec ikev1 transform-set ESP-3DES-SHA esp-3des esp-sha-hmac
crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 set ikev1 transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA ESP-3DES-MD5 ESP-DES-SHA ESP-DES-MD5
crypto map Outside_map 65535 ipsec-isakmp dynamic SYSTEM_DEFAULT_CRYPTO_MAP
crypto map Outside_map interface Outside
crypto ikev1 enable Outside
crypto ikev1 policy 10
authentication pre-share
encryption 3des
hash sha
group 2
lifetime 86400
crypto ikev1 policy 30
authentication crack
encryption 3des
hash sha
group 2
lifetime 86400
telnet 172.17.1.0 255.255.255.0 Inside
telnet timeout 5
ssh 172.17.1.0 255.255.255.0 Inside
ssh timeout 5
console timeout 0
dhcpd address 172.17.1.100-172.17.1.200 Inside
dhcpd dns 172.17.1.41 172.17.1.42 interface Inside
dhcpd lease 100000 interface Inside
dhcpd domain adrs1.net interface Inside
threat-detection basic-threat
threat-detection statistics
threat-detection statistics tcp-intercept rate-interval 30 burst-rate 400 average-rate 200
webvpn
group-policy RedV internal
group-policy RedV attributes
wins-server value 172.17.1.41
dns-server value 172.17.1.41 172.17.1.42
vpn-tunnel-protocol ikev1
default-domain value ADRS1.NET
group-policy RedV_1 internal
group-policy RedV_1 attributes
wins-server value 172.17.1.41
dns-server value 172.17.1.41 172.17.1.42
vpn-tunnel-protocol ikev1
split-tunnel-policy tunnelspecified
default-domain value adrs1.net
username rparker password FnbvAdOZxk4r40E5 encrypted privilege 15
username rparker attributes
vpn-group-policy RedV
username mhale password 2reWKpsLC5em3o1P encrypted privilege 0
username mhale attributes
vpn-group-policy RedV
username dcoletto password g53yRiEqpcYkSyYS encrypted privilege 0
username dcoletto attributes
vpn-group-policy RedV
username rhanna password Pd3E3vqnGmV84Ds2 encrypted privilege 15
username rhanna attributes
vpn-group-policy RedV
tunnel-group RedV type remote-access
tunnel-group RedV general-attributes
address-pool VPN2
authentication-server-group RedVec
default-group-policy RedV
tunnel-group RedV ipsec-attributes
ikev1 pre-shared-key *****
class-map global-class
match access-list global_mpc
class-map inspection_default
match default-inspection-traffic
policy-map type inspect dns preset_dns_map
parameters
message-length maximum client auto
message-length maximum 512
policy-map global_policy
class inspection_default
inspect dns preset_dns_map
inspect ftp
inspect h323 h225
inspect h323 ras
inspect rsh
inspect rtsp
inspect esmtp
inspect sqlnet
inspect skinny
inspect sunrpc
inspect xdmcp
inspect sip
inspect netbios
inspect tftp
inspect ip-options
inspect icmp
class global-class
flow-export event-type all destination 172.17.1.52
service-policy global_policy global
prompt hostname context
call-home
profile CiscoTAC-1
no active
destination address http https://tools.cisco.com/its/service/oddce/services/DDCEService
destination address email [email protected]
destination transport-method http
subscribe-to-alert-group diagnostic
subscribe-to-alert-group environment
subscribe-to-alert-group inventory periodic monthly
subscribe-to-alert-group configuration periodic monthly
subscribe-to-alert-group telemetry periodic daily
hpm topN enable
Cryptochecksum:202ad58ba009fb24cbd119ed6d7237a9Hi Roger,
I bet you already checked it, but does the MPLS end router has route to VPN client subnet 172.17.200.x (or default) pointing to core rtr)?
Also, if the MPLS link has any /30 subnet assigned, you may need to include that as well in Object group LAN-NETWORKS.
Thx
MS -
Having problems with ipad mini and Siri. Works sporadically, will work once and then the second time not. Worked all the time with the original Mailbox app. Then started doing the same thing when I installed the new update so wondering if it is software?
Hi,
I have the check box on a second Partition but not on the Time Machine one
I forget what I did now to get this called "Recovery HD"
For the rest try https://discussions.apple.com/docs/DOC-4055 User Tip that links to Pondini's work on Time Machine.
10:17 pm Friday; May 2, 2014
iMac 2.5Ghz i5 2011 (Mavericks 10.9)
G4/1GhzDual MDD (Leopard 10.5.8)
MacBookPro 2Gb (Snow Leopard 10.6.8)
Mac OS X (10.6.8),
Couple of iPhones and an iPad -
Hi! I´m having problems with showing video files in Qlab on my Macbook Air. It started suddenly. Consulted a sound/video technician who told me to "blow out" my Mac. Was told to use cmd+r when restarting. Is this the right way to clean up my Mac? And is it likely that some kind of bug is causing problems for Qlab to show video files? I´ve already tried with a bunch of different video files and sometimes Qlab plays them and sometimes not. I need the Qlab playlist for a theatre show and only have a week until showtime so starting to really worry. Is there anyone out there who can help?
Your Mac runs maintenance in the background for you.
Command + R gives you access to restore, repair, or reformat the drive using OS X Recovery
No idea why that was suggested.
You may have a third party video player installed that's causing an incompatibility issue.
Check these folders:
/Library/Internet Plug-Ins/
/Library/Input Methods/
/Library/InputManagers/
/Library/ScriptingAdditions
~/Library/Internet Plug-Ins/
~/Library/Input Methods/
~/Library/InputManagers/
~/Library/ScriptingAdditions
The first four locations listed are in the root-level Library on your hard disk, not the user-level Library in your Home folder.The tilde (~) represents your Home folder.
To access the Home folder in OS X Lion or Mountain Lion, open the Finder, hold the Option key, and chooseGo > Library. -
I'm having problems with iPhoto and the facebook set-up. Every time I attempt to do so it says an error has occured and try again later. I have not seen a solution posted. Therefore, how does one contact Apple to solve the problem? I'm new to the world of iMac but I find it a bit frustrating trying to solve basic issues/problems:(
For what it's worth, you posted this in 2011, and here in 2014 I am still having this same issue. Over the last two days, I have had to unlock my apple account 8 times. I didn't get any new devices. I haven't initiated a password reset. I didn't forget my password. I set up two factor authentication and have been able to do the unlocking with the key and using a code sent to one of my devices.
That all works.
It's this having to unlock my account every time I go to use any of my devices. And I have many: iMac, iPad, iPad2, iPad mini, iPhone 5s, iPod touch (daughter), and my old iPhone 4 being used as an ipod touch now. They are all synced, and all was working just fine.
I have initiated an incident with Apple (again) but I know they are just going to suggest I change my Apple ID. It's a simple one, and one that I am sure others think is theirs. I don't want to change it. I shouldn't have to. Apple should be able to tell me who is trying to use it, or at least from where.
Thanks for listening,
Melissa
Maybe you are looking for
-
Transport request problem with a ztable
Hello, I have some problems releasing a customizing transport request. It contains "table contents" of a z table. This z table is marked as "customizing table" (option C). Error message is "task desk900213 belongs to a different category" Thanks.
-
Failed to Call Self Written Class Files in JAVA 1.4
While compiling java application in JAVA 1.4 environment, import command for self written class file fails even though classpath is set and declared during compilation. It flashes like ". is expected" Please help, Regards, Avijit Dutta (e-mail - [ema
-
IPhone pre order without subsidy
My At&t number is currently not eligible for an upgrade. I want to pre order a iPhone 4 from the Apple website once I can do so next week. Will I be able to pre order an iPhone 4 for the full $699 price? Or are pre orders for upgrades only? Thank you
-
Hi. I have a problem with the use of memory of my application. It has graph and pivottable components with bean classes that manages them. These classes are defined at level of session. It suposes that the instances of these classes will be erased by
-
[iPhone] Pinch/zoom in UIScrollView at simulator does not work
Hi everyone, I tried to get pinch/zoom working for a UIImageView within a UIScrollView. Therefore I downloaded the source code from the tutorial under http://www.vimeo.com/1642150. When I started the app in the iPhone simulator I used the options key