Having problem with discontinuity in the waveform

Hi Experts,
I am trying to build a multifunction vi that is able to generate analog waveforms and read them simultaneously using USB-6251 and Signal Conditioning Connector Block Model SC-2345. I plan to add a signal from the sensor to the waveform in the future but that is not the case now. However, when I run the program, it turns out to a small discontinuity in the waveforms which I really have no idea how to fix it. And it is quite unacceptable since it affects the shape of the waveform and its frequency. I attached the file. Any suggestions would be greatly appreciated.
Sorry if my English causes you problems. Thanks in Advance.
Nattapat Thanesvorakul
Student
Solved!
Go to Solution.
Attachments:
kun_4.vi ‏147 KB

There are a couple issues that could be causing this. First, you are resetting the function generator each time and you are not set for continuous generation.

Similar Messages

I'm having problems with iPhoto and the facebook set-up. Every time I attempt to do so it says an error has occured and try again later. I have not seen a solution posted. Therefore, how does one contact Apple to solve the problem? I'm new to the worl

I'm having problems with iPhoto and the facebook set-up. Every time I attempt to do so it says an error has occured and try again later. I have not seen a solution posted. Therefore, how does one contact Apple to solve the problem? I'm new to the world of iMac but I find it a bit frustrating trying to solve basic issues/problems:(

For what it's worth, you posted this in 2011, and here in 2014 I am still having this same issue. Over the last two days, I have had to unlock my apple account 8 times. I didn't get any new devices. I haven't initiated a password reset. I didn't forget my password. I set up two factor authentication and have been able to do the unlocking with the key and using a code sent to one of my devices.
That all works.
It's this having to unlock my account every time I go to use any of my devices. And I have many: iMac, iPad, iPad2, iPad mini, iPhone 5s, iPod touch (daughter), and my old iPhone 4 being used as an ipod touch now. They are all synced, and all was working just fine.
I have initiated an incident with Apple (again) but I know they are just going to suggest I change my Apple ID. It's a simple one, and one that I am sure others think is theirs. I don't want to change it. I shouldn't have to. Apple should be able to tell me who is trying to use it, or at least from where.
Thanks for listening,
Melissa

Anyone else having problems with popups since the new security upgrade? can't get rid of them

anyone else having problems with popups since the new security upgrade? can't get rid of them

You may have inadvertently installed adware. You do not need to download or install anything to fix it. It ought not to be related to any Apple security update.
For a description of how this may have occurred, how to avoid it in the future, and for Apple's recommended actions read How to install adware. Apple's instructions are linked in the Recovery Procedure near the end of that document. Read and follow them carefully. Pay particular attention to the easily overlooked passages directing you to restart your Mac when required.

I have just got an iPhone 4s on vodafone. I'm having problems with 3G, at the top it says Vodafone E, usually it would say 3G wouldn't it? At the moment my 3G isn't working. Anyone know what to do?

I have just got an iPhone 4s on vodafone. I'm having problems with 3G, at the top it says Vodafone E, usually it would say 3G wouldn't it? At the moment my 3G isn't working. Anyone know what to do?

Yeah it does have that on/off switch and it's turned on. Siri won't work for some reason, I don't know if it's to do with this E thing?

I'm having problems with Outlook for the Mac, anyone else?, I'm having problems with Outlook for the Mac, anyone else?

I have recently purchased a Mac. I'm very dissapointed at the way Outlook 2011(the newest version, what?!?)interfaces with the Mac. I used the contacts feature all the time when I had a microsoft system. Now, I can't do that with Outlook for the Mac. Does anyone have any alternative Apps that they've used for Business contacts? Thanks much.

thank you both for your responses. I'm having trouble mostly with a way to handle my business contacts. I'm self employed and when I had Outlook for Microst(before I switched to Apple)I was so pleased with this softward. Esp the way it would keep track of any correspondense between me and my customer. I could also track billing thru Outlook contacts.
Now, I get my mail thru outllook and use ical and @contacts. I see that I can have a separate group of contacts thru @contacts, but, it's not the same or nearly as good as Outlook contacts for Microsoft.
So, right now I'm really disapointed with my Mac purchase and hoping to find an app that will help. I will investigate Thunderbird.
thanks again.

TS1368 Hi users .im having problems with buying from the store & it tells me to contact itunes support . what could be the problem? please help..;))

When trying to purchase bingo credit it wont allow me and refer me to check itunes support for this purchase...i dont owe money i have itunes credit available ..please help..;
)

i also cant connect to itunes or download fany apps? please dont send me to the apple support pages . the info there is useless. its not a wifi connection problem or the router. my friend has the same ipad and is using the same wifi connection and he has not problems with downloading apps. sometimes i can get into the app store and then it starts to download and thenit says it cant. i,ve searched all the forum and no one has given me an answer. please help. i tried the trouble shooting page to and it was no use.

Having problems with InDesign6 and the new OSX Mavericks

I just downloaded the new OSX and now my Id6 won't open. It starts initializing and the I get the message "InDesign quit unexpectedly." I am in the middle of publishing a book for someone using the "export to kindle" plug-in which isn't compatible with IdCC. Has anyone else had this problem?

I have just run into the same issue. New Macbook Pro running Maverick and I have Vectorworks 2011. Appple support recommends against partitioning the hard drive on a new MacBook Pro running Maverick. (The first call the apple person suggested it. On a follow up call they strongly recommend against doing it because it can screw up the firmware.) How did doing the downgrade work for you, and how did you do it, external drive, partition? I hate to drop $1300 on Vectorworks when I don't yet need it.

I am having problems with my computer the whole thing

it wont load right keeps freezing up my batter and the charger will not work i have it pluged in the wall all the time when i turn it off i have to play with it to get it turn back on so please help me with it

Hey rachelweed,
I see that you're having an issue with the battery.
Try a hard reset first. Here is a document to show you how to do this-http://goo.gl/0gkhv
Now, if you have to "mess" with the charger which I believe you mean move the charger back and forth to get it to charge, there might be an issue with the power cord itself.

I have been having problems with flash opening the Weight Watcher Plan Manager.

SInce the flash update on July 26th I have not been able to open the plan manager in Weight Watchers. I have uninstalled flash and reinstalled it a number of times. I even reinstalled an older version and it does not help. I have already done a clean install, deleted cookies, history and the cache. I have contacted WW and they are no help. I usually use Firefox, but it also does not work on Chrome, or IE9. Any ideas?

You have the latest version of Flash Player installed, and it seems to work (since you can see the Flash animation on the Adobe website).
A few things to try:
disable Hardware Acceleration; see http://forums.adobe.com/thread/891337 (re-enable it if it does not resolve your problem)
disable Protected Mode; see http://forums.adobe.com/thread/1018071 towards the end (re-enable it if it does not resolve your problem)
try another browser, e.g. the 64-bit version of Firefox: Waterfox, or Internet Explorer

I'm having problem with my printer the carriage is not moving from si

My printer carriage is not moving from side to side, It's like something not connecting and the light is blinking.

Please review this post and then post some details. What printer model? What operating system? How is the printer connected? Are there any error messages?
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

I'm having problems with Google since the Firefox 4 upgrade.

Since upgrading to Firefox 4, when I try to do a search from the Google home page, and I click on "Google Search" I am taken to a blank page w/no results. However, if I search through Google's Advanced Search feature, I don't have any problems. Any advice on how to fix this?

Wifi issues are one of the common issues being reported by users. There is not much you can do at this point but wait and hope that th 10.8.1 update will address these issues.

I'm having problems with IWS 41SP8, the log error shows Aborting JVM, then Exiting JVM due to: jvm_abort () and jvm.exitOnAbort 0. What can I do?

Additonal JVM exit statistics: AttachedThreads/Max=255/313, ActiveThreads/Max=323/323, and finally the web server restart.

Hi,
Please look out the below link.
http://knowledgebase.iplanet.com/ikb/kb/articles/5063.html
By the way i would request yout to use JDK1.2.2_011.
I hope this helps.
Regards,
Dakshin.
Developer Technical Support
Sun Microsystems
http://www.sun.com/developers/support.

Firefox 4.0 is having problems with Silverlight. The site i am accessing comes up but the buttons have lost their functionality.

Help!

PS: did i mention that I am not able to access my online banking, etc? i apologize for the cranky tone of this post, but i am really desperate and need quick assistance in how to remove the current version of firefox and reload the last one.

Anybody having problems with VectorWorks and the new OS 10 Maverick?

After installing Maverick, my VectorWorks 2011 keeps craching and will not load.

I have just run into the same issue. New Macbook Pro running Maverick and I have Vectorworks 2011. Appple support recommends against partitioning the hard drive on a new MacBook Pro running Maverick. (The first call the apple person suggested it. On a follow up call they strongly recommend against doing it because it can screw up the firmware.) How did doing the downgrade work for you, and how did you do it, external drive, partition? I hate to drop $1300 on Vectorworks when I don't yet need it.

Having problems with OSX and mail with the servers?

Having problems with OSX and the mail servers? Seems to be happening more and more?

Hello,
Who is your eMail provider, the part after the @ sign?
In Mail's Window Menu, choose Connection Doctor, any red dots for status, if so what is the message?
Then click the Show Details button & Check again.
Open Keychain Access in Utilities, use Keychain First Aid under the Keychain Menu item, then either check the Password under that item, change it, or delete it and start over.
You may have multiple entries.
Open Keychain Access in Utilities, enter the part after the @ sign in the search bar, hit enter
The Password rejection can confuse people since it's a catch all meaning...
This Password, Username, Authentication method... is not recognized on this Port to this Server, more than one entry in Keychain for each in/out entry, or a server end problem.
If using a browser to login via WebMail works it's not Name or Password, but one of the other ones.
The receiving email ports are:
IMAP is port 143
IMAP-SSL is port 993
POP is port 110
POP-SSL is port 995
Outgoing ports are...
SMTP and SMTP-SSL is on ports 25, 587 and 465. Port 587 has to be SSL, and port 465 is enforced TLS-wrapped and is generally used by Outlook users.

Having problem with discontinuity in the waveform

Similar Messages

Maybe you are looking for