Having problem with vision assistant !

I turn my picture into image reference and use assistant to modify it
but the result isn't what I see in the assistant
can anyone help me?
Attachments:
vision test.vi ‏47 KB

Maybe your vision has problem in your PC.
Try to uninstall NI SW & reinstall.
or 
install into another clean PC.
Thanks

Similar Messages

  • I am having problems with migration assistant (windows pc to Mac 2011) When I get to the 'Quit other applications' box and click continue, nothing happens. There are no other apps running - any ideas, please?

    I am having probems with migration assistant. Trying to transfer data from a windows laptop to iMac 2011. It was working fine when I did the set-up yesterday, but it was going to take hours to transfer some videos so I quit the process with the intention of doing it again at a later stage. However today I find that everytime I get to the 'Quit other applications' box on the Mac and click 'continue', nothing happens. Have checked mission control and confirmed no other apps running. Tried several times with the same result every time. Migration Assistant running on my laptop with the 'Waiting for mac to connect' box displayed. Mac is connected to wi-fi OK as able to use Safari and access internet. Any ideas, please?

    Thanks for your suggestions. Have managed to get Migration Assistant working but now have a new problem, i.e. where does it save the transferred files?!! Searched a few forums and it seems it saves it under your old username, or suchlike. Anyway I tried logging on as a new user using my old user name but there were only a handful of files there, couldn't locate the majority of stuff from my old laptop. Anyway I don't intend to go through any more hoops with MA - will just save the important stuff to an external drive and transfer it that way. Not impressed with MA at all. I thought it was supposed to be a user-friendly tool to simplify the transfer from pc to Mac - not my experience, I'm afraid!

  • I am having problem with my itunes account because when i try to buy something online it say..Your purchase can not be completed for assistance, contact itunes support.

    I am having problem with my itunes account because when i try to buy something online it say..Your purchase can not be completed for assistance, contact itunes support.

    What happened when you contacted iTunes support as directed?
    http://www.apple.com/support/itunes/contact/

  • I am having problems with downloading Windows Support Software by using Boot Camp Assistant. Is there somewhere else I can download from?

    I am having problems with downloading Windows Support Software by using Boot Camp Assistant. Is there somewhere else I can download from?

    No. There is no other location. Be patient. Read the posts in the Bootcamp Forum. There are hundreds of posts about your issue and what to do. https://discussions.apple.com/community/windows_software/boot_camp

  • I am having problem with MDV Studio.

    Hello happy guys, whatzup? Guess all ya 'r doing fine? Right!
    I am using Dreamweaver from Macromedia Studio 2004. I am having problem with Inserting Record into Access database using the forms I create on my .asp document. I am using IIS and Javascript as my Document Technology. The error I usually have is:
    "Technical Information (for support personnel)
    Error Type:
    Microsoft OLE DB Provider for ODBC Drivers (0x80004005)
    [Microsoft][ODBC Microsoft Access Driver] Operation must use an updateable query.
    /site_files/user_regform.asp, line 78
    Browser Type:
    Mozilla/5.0 (Windows; U; Windows NT 5.1; en-US) AppleWebKit/530.5 (KHTML, like Gecko) Chrome/2.0.172.28 Safari/530.5
    Page:
    POST 41 bytes to /site_files/user_regform.asp
    POST Data:
    uname=Honesty&pword=admin&MM_insert=form1
    Time:
    Tuesday, June 02, 2009, 1:49:39 PM"
    Please I need assistance on how to solve this problem. Thank you.
    Similarly, I don't really know how to write sql strings - I just give commands and Dreamweaver will generate the sql strings. Yet, I still observe errors. But I think, for the sql aspect, I'm undergoing a tutorial note that I downloaded on the internet.
    Please help me to solve this error problem at the moment. The sql knowledge is not the problem. I can get that at my leisure.
    Thank you.
    Eyo Eyo (Nigeria).

    It sounds like you do not have an internet connection (wifi arcs in the upper left does not mean you have a connection) since Safari does not work also.. Try the following:
    - Reset the iPod. Nothing will be lost.
    Reset iPod touch:  Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Power off and then back on the router
    - Reset networks settings: Settings>General>Reset>Reset Network Settings
    - iPhone and iPod touch: Troubleshooting Wi-Fi networks and connections

  • My iPod Touch 3rd Gen is having problems with the touch screen being unresponsive, too responsive, freezing and constantly resizing. Is this a common problem? Is there a fix?

    My iPod Touch (3rd Gen) is having problems with the touch screen being unresponsive, too responsive, freezing and constantly resizing. It varies between not responding when I tap the screen and acting as if I double-tap or tap and hold when I tap. Every so often it freezes for a minute or so and then comes back. The scren is constantly changing sizes too such that I often can't see most of the top status bar or other edges. This makes typing almost impossible, ruins most games and generally makes everything difficult, but otherwise the iPod is working correctly. Powering off, shutting down apps, letting it sit have not worked. This has happened once before months ago, but the issue resolved itself somehow. Is this a common problem? Is there a fix?

    Try this for the freezing
    http://www.apple.com/support/ipodtouch/assistant/ipodtouch/
    Or if they don't work put it into recovery mode
    See here
    http://www.apple.com/support/ipodtouch/assistant/restore/
    Then restore
    http://support.apple.com/kb/HT1414

  • Having problems with iTunes on Windows 7 64bit

    I'm having problems with my iTunes with windows 7. I have done everything you possibly can from Apple support section and nothing seems to work.
    Well my problem is that iTunes cannot connect to my iPad or iPhone. Both of these devices work fine with my fathers computers but somehow they don't work on my computer.
    When I connect my iPad to my computer, unknown error will pop from iTunes. And it thinks my iPad is iPhone, wierd (or does iPad have iPhone operating system or something?). It does samething with my iPhone too, unknown error.
    If anyone has had same problems that I do and somehow solved the problem, would you please assist me?

    Well now it seems that I have another problem too. Now my iTunes can't find my iPad at all, no error messages or anything.
    Now the error message was one of these 4: (0xE8000065)(0xE800000a)(0xE800006b)(0xE8000001)
    I can't remember which it was because I can't get any error messages anymore.
    By the way, here is a list of what I have done already to make things work.
    -uninstalled/reinstalled iTunes 9.1 many, many times in different folders too.
    -updated all my drivers
    -checked that windows can find my iPad and it does.
    -Shut down my F-Secure firewall ect. and trying to connect iPad then.
    -I have done everything what you possibly can from this site http://support.apple.com/kb/TS3221
    -my USB ports work fine with every other devices like my 500gb harddrive, mouse, keyboard ect. and I have tried to disconnect every other USB devices except iPad and still not working.
    I'll try deleting my USB drivers now, reinstall them and even if after doing all that and iPad still not connecting to iTunes.. well then it's our of my league, I don't know anything more to do.
    Oh, and by the way. I called to Apple support and they only said that there shouldn't be any problems with Windows 7 and iTunes and they couldn't help me very much.. And my iPad works fine with other computers that are in my house.

  • Canon pixma pro 9500 having problems with my print out. colors are glazed and missing colors

    canon pixma pro 9500 having problems with my print out. colors are glazed and missing colors
    i have prfiled the mac and printer wiht colormunki and uplodated the profile sucessfully
    i set the printer to correct icc profile
    print out comes out same with glazed colors and missing tones/colors
    however when i use the same printer on windows and with light room, following same icc profile, colormunki calibrated profile, the print our are excellent.
    i have also tried using printer manage profile using the Mac and Aperture and get same poor prints
    can  you please assist and thanks

    I've a Pro9000 and also use Colormunki successfully.
    When I use Colormunki, I calibrate both of my monitors and the printer/paper combination. Colormunki saves the generated profiles to the correct places -- I don't load or change any profiles after that as that would mess-up what the Colormunki had just done for me, and this would likely mess-up the prints.
    Though I double-check the settings in the print dialogue, the choice for the printer handling things is already grayed-out. Colorsync handles it all just fine.

  • I'M HAVING PROBLEM WITH FUNCTION KEY, I'M HAVING PROBLEM WITH FUNCTION KEY

    Hello everybody
    Recently i'm having problem with function key of iphone4, now its working assistive touch key board , between these days i had restored and update then it work for next 12 hour after that it again stoped..
    pls help me from this isssue,
    thanking you.

    There are no function keys on the iPhone.
    Please clearly state the issue that is occurring.

  • I have a iPhone 4S 16 gb and I am having problem with sim activation please tell me what to do

    I have a iPhone 4S and I am having problem with its.activation plz tell me. The solution of this problem?

    Did you already try these steps?
    Restart the iPhone.
    Try another means of reaching the activation server and attempt to activate.
    Try connecting to a known-good Wi-Fi network if you're unable to activate using a cellular data connection.
    Try connecting to iTunes if you're unable to activate using Wi-Fi.
    Restore the iPhone.
    If you receive an alert message when you attempt to activate your iPhone, try to place the iPhone in recovery mode and perform a restore. If you're still unable to complete the setup assistant due to an activation error, contact Apple for assistance.
    copied from iOS: Troubleshooting activation issues

  • Having problem with hp computer freezing up and rebooting? have already updated video drivers

    I having problem with HP Slimline Desktop with AMD Vision, freezing up and rebooting, and will sometimes show horiztonal lines across the screen, making screen unreadable. Have had problem for a few weeks, I have already checked with HP tools hard drive and video display both check out, and have I restored the system back to its orginal version by using partion drive and, none seems to help get rid of the freezing and rebooting of PC. Any thought what need to look at?

    Can you locate a product number on the system that is freezing??
    I am an HP employee, but my views are my own and are not endorsed by HP.

  • No Image - 1473R With Vision Assistant

    Hopefully this is a simple fix and I'm missing something very obvious, so here is what's up. I'm originally a text programmer but for this project I'm stuck using LabVIEW which is completely unfamiliar; I've been working on this for days with no progress so I thougt I'd see if anyone had some pointers. The goal of the project is to use the PCIe-1473R FPGA to do live gain control, overlay, and maybe some recognition.
    I started with the "Image Processing with Vision Assistant on FPGA" example and made a few simple changes to just attempt to get a video feed through. The camera we are using is a Pulnix TM 1325 CL, which outputs a 1 tap/10 bit Camera Link signal. Since this example VI is originally configured 1 tap/8 bit I changed the incoming pixel to be read as 1 tap/10 bit and compiled and tested. When I try to start video acquisition I get no errors but no frames are grabbed. The frame's acquisitioned count does not increase and nothing is displayed. If I switch to line scan I get a scanning static image, but this is not a line scan camera and my other NI frame grabber card shows an image from the camera fine.
    I wasn't all that surprised with this result, as the input is 10 bit and the acquisition FIFO and DMA FIFO are both 8 bit orginally. So, I changed them to U16 and also changed IMAQ FPGA FIFO to Pixel Bus and IMAQ FPGA Pixel Bus to FIFO blocks on either side of the Vision Assistant to U16. With this configuration, I again get no image at all; same results. I suspect this is because the incoming image is signed, so the types should be I16 instead. However, there is no setting for I16 on the Pixel Bus conversion methods. Am I not understanding the types happneing here or is there an alternative method for using Vision Assistant with signed images? I'd think it'd be odd not have support for signed input.
    Anyway, I've tried all the different combos of settings I can think of. Does anyone have any input? I feel like it must be either a buffer size problem or a signing problem, but I don't really know. Any and all input is welcome!
    Thanks for helping out a new guy,
    Kidron

    I ended up resolving this issue by switching cameras. The end goal was to use a FLIR SC6100, so I switched to it and was able to get things working shortly. The FLIR does use unsigned ints, so I believe that's what resovled the issue for anyone running into this in the future.

  • Is Anyone else having problems with their I MAC 24" Foggy display?

    Is anyone else having problems with their I MAC 24" having a foggy display in lower right hand corner after the computer has been on for 30 or 45 min? This is now the 2nd computer that has this same problem. Just wondering if anyone else is having this issue with the IMAC 24"? Does anyone know what might be the cause? I have only had the computer for a month. Thanks very much.

    Thank you for the nice welcome.
    Sorry about posting in the wrong area I found the correct discussion board. http://discussions.apple.com/thread.jspa?messageID=7998535#7998535
    Its seems that I am not alone in my problem but I do have good news to report that apple support has acknowledged the issue is happening and a fix is in the works. The support and assistance I received today helped greatly to restore my faith in apple product satisfaction.
    Lets hope you don't have this experience in the future, hopefully a solution can be reached that is in everyone best interest. I may have to drive a greater distance to another apple store but for myself and others like me feel its worth the extra effort to get better customer service in the long run.

  • Is anyone having problems with the facebook app - just shuts down before it even loads - frustrating!

    Is anyone having problems with the facebook app - just shuts down before it even loads - frustrating!

    Hi Robk573,
    Thanks for visiting Apple Support Communities.
    I'd suggest the steps in our iPad troubleshooting assistant:
    https://www.apple.com/support/ipad/assistant/application/
    Best,
    Jeremy

  • I am having problems with my Pantech Caper. Please Help!

    I just transferred my phone number over to a used Pantech Caper that I bought a few years ago. When I used the Caper previously I had no problem with it. And the phone i had before i transferred numbers worked just fine i was just having problems with some buttons not working. Now that i have transferred the number over to the Caper i can receive texts and picture messages but can not download the messages. I can not receive calls nor can i send texts out. after i try to send a text I receive a message saying I have insufficient fund to send message. oh extra info... i have the plan for 500 minutes and unlimited text picture messages and unlimited web. Please Help... I need my phone for work.

        Hi YukiCross,
    I am  confident your issue has been resolved since your original post! If not,let's get this figured out. Based on your description it sounds like you have Pre-Paid service with us. For Pre-Paid assistance please reach out to:888-294-6804 . I can gladly address and resolve any Post-Pay related concerns.
    Thanks for your contribution to our community forums,
    AyaniB_VZW
    Follow us on Twitter @VZWSupport

Maybe you are looking for