Having problem with wifi after upgrading to iOS 6

After I upgrade my iPhone to ios6 I am having many problems connecting to wifi.
Places that I had wifi connection at home now are not available and it takes long time for the iPhone to connect to the wifi.
What to do??????

Do the basics first. follow http://support.apple.com/kb/TS1398. I would also clear cookies and data in settings > safari.

Similar Messages

  • Having issues with WiFi after upgrading to iOS 7.

    After upgrading my iPhone 5 to iOS 7 I'm having WiFi issues that I didn't have with iOS 6.  For example, on my home network YouTube videos hang multiple times in a 1 minute video, Facebook pages with heavy duty graphics take forever or don't load, and running Ookla speed test, all the test are slower.  On every other computers in the house, download is faster than upload, except on the iPhone 5 with iOS 7.  Anyone else seen this?

    Do the basics first. follow http://support.apple.com/kb/TS1398. I would also clear cookies and data in settings > safari.

  • I am having problems with mail after upgrading to mountain lion. Is there a way to go back to lion?

    I am having problems with mail after upgrading to mountain lion. Is there a way to go back to lion?

    It would always be easier to fix the Mail problems.

  • Problem with contacts after upgrading to iOS 7 (iphone 5)

    After upgrading to iOS 7 (iphone 5), the contacts (loaded from icloud) in greek language aren't sorted!!! They are under the # symbol!! Anyone has a solution. I didnt have this problem with previous iOS versions!!!!

    My phone was fine after I connected to iTunes. It appeared in recovery mode and then it downloaded the update, installed and all was fine.
    Regards,
    Jeevan.

  • I amhaving problems with iphone after upgrade to ios 6

    After upgrading to ios 6 my phone does not accept my id to iclou d ?

    Sorry, but the note is in Spain (I guess), can you please translate?
    We have the same issue on our productive HR system - but not on the development system, what makes it curious.
    When we try to start contracts in word we get the same message
    "Opening this will run the following SQL command
    SELECT * FROM C:\.....Datasource_tab.SAP
    How can we avoid this message?
    Thanks in advance!

  • Trouble with wifi after upgrade to IOS 8

    After upgrading my iPad 3 to Ios 8 yesterday I am having trouble of connecting to the internet using the wireless wifi modem on MacBook Pro. The Wifi appears to connect  to the iPad but I get a message '"MacBook Pro" is Not Connected to the Internet" when I start the process of connecting to my MacBook. I join anyway but I don't see the WiFi icon on top of my iPad even though I have a tick next to the connection on the settings page. Does anyone have any idea how I get the Wifi working again?

    My problem turned out to be that the Sharing app decided to make the newly discovered Thunderbolt Bridge the default device to be used for sharing rather than my USB modem. Changing back to the original setting and everything is working again.

  • I'm having problems with Notes after upgrade to OS4. Anyone else?

    After upgrading mu iphone 3GS to the new OS4, I'm having serious problems with my Notes. If I edit old notes and klick Done, it now takes longer then ever to save. And when the save is finished, my latest edits are gone! The note is back to the text before I opened it up for editing...
    Has enyone experienced this after upgrading?
    Also, why does it take such a long time so save the notes now? I can see in the "progress bar" the phone is connecting to the Internet after klicking Done. Why is that? It never did that before. Does the new OS4 save all notes on some sort of server instead of just saving on my phone? Can I shut this function off somehow?
    Thanx for all answeres!

    I am having the same issue but havent been able to find a solution yet.

  • Is anyone having problems with keynote after upgrading to Lion?

    After upgrading my system to Lion, my keynote presentations are becoming a nightmare. They crash all the time, and are becoming significantly slower, not just due to the autosave but after making just a few movements the beach ball appears and takes forever for me to be able to edit the document again. When I try to put into presentation mode the computer stops, sometimes I even lost the images inside the saved prasentation, and when I tried to recover from the auto saved versions, they were corrupted also. I talked to the apple support here in Brazil and after running all kinds procedures to check and fix the disk and hardware even in the safe mode, it still remained with the same problem. Another suggestion was to reinstall the keynote, and I even bought a new version from the app store even though the old one was updated. Again, nothing changed. Does anyone have the same problem or knows what to do?

    Hi Thomas - listen, I want to tell you that we aren't necessarily all in the same boat...what I mean is that this problem almost ruined my business and I spent a long time reading the dozen or so threads in this board, and tried solutions people suggested in each one. I had two separate problems...the first was like yours, and it was indeed solved by the time machine save setting mentioned above. The other was that I couldn't get an object selected with a click of the mouse every tenth time or so...I had to click onto a different slide and then come back to mine. I started turning off every single piece of hardware and software one by one, in search of a conflict. It turns out that my Apple Magic Mouse was the problem. I switched it to a plain MS wireless mouse and problem solved. *****, but it let's me continue. My point is that too many people are using Keynote just fine for any of us to throw in the towel and say it's universally and irreversibly broken. There are different bugs in play, but you have to go on the assumption that there's a way out if you can spot what's not quite right. Sorry I don't have your specific solution, but this mindset is what saved me from jumping ship to PPT.

  • Anyone having problems with Safari after upgrading to Yosemite?

    Safari takes over 2 minutes to open after upgrading to Yosemite and once open it is not responsive.  What is wrong?  I have redone the download and it still has the problem.

    I found this workaround and it worked for me. 
    "According to Hontz, the issue seems to be affecting only iPhone 4S users. Hontz has provided the following workaround to fix the issue:
    1) Open the Phone and dial *228. This is a Verizon over-the-air programming number. 2) When the system answer press 1 for “Program or activate your phone” 3) Wait for the call to disconnect. You should get a prompt stating something like, “Settings updated.” 4) Open the Task Manager (double click the home button) and kill the Phone, Message, and Contacts Applications 5) Wait a few minutes (I waited 3 just to be extra safe) 6) Open the Message App to verify the fix.
    If you are still broken, kill the Message App again, then reboot your phone.
    Did iOS 5.0.1 also mess up your iPhone Contacts? Let us know if the workaround helped."
    via: TSF

  • Problems with numbers after upgrade to iOS 7

    Hi,
    after upgrade to ios7 comma in numbers sheets are replaced with colon. Playing around with cell formats doesn't changge this. Any idea's how to get it back to "normal"?
    Best Regards,
    Solem

    If you are considering returning the device, do not wait much longer. What you might want to do is to make an appointment at an Apple Store Genius Bar and ask for their help with the iPad.
    There are several things that you can try before returning the device and the Apple Store would put your iPad through those paces before exchanging the device out for you anyway.
    iOS: Troubleshooting Wi-Fi networks and connections
    Have you done any basic troubleshooting? Unplug your router from power for about 30 secnds and plug it in again.
    Settings>General>Reset>Reset Network Settings.
    If it comes down to it....
    Use iTunes to restore your iOS device to factory settings

  • I Phone 4 - problem with bluetooth after upgrading to ios 4.2.1

    Since I have upgraded the software on my I phone 4, I have noticed a problem with my hands free kit in my car using bluetooth. When I make a call the sound comes through the system ok, but if I dial to voicemail the sound doesn’t come through. I never had this problem prior to the upgrade. Any suggestions?

    At least there is a way! only problem by doing this is, on the vodafone network you have to input your phone number followed by a pin every time if you access using +447836 121 121. The short key 121 is the way forward! Will this be fixed? is there a way of taking the I phone 4 back to previous version of software?

  • Am I the only one (still...) having issues with Bluetooth after upgrading to iOS 8.1...?

    Hi fellas,
    I guess my expectation level was way too high regarding this upgrade from iOS 8.0.2 to 8.1: my iPhone 6 still can't connect to Bluetooth peripherals, whatever they may be...
    I have a MacBook Pro running Snow Leopard, and a PC with Windows 8.1 update on it, and none of them can pair with the iPhone, no matter how hard I try.
    Have you guys found workaround measures or (hopefully) solutions?
    I swore today was my last day going to work with the crappy Apple-issue headphones that came with the phone, and I'd pack my faithful Sony Ericsson BT to work tomorrow...

    Your english is very good! For Handoff/Continuity to work you need Bluetooth turned on on both devices and they need to be in range of each other -- but you do NOT go to the Bluetooth setting on either device and pair them. I know that is unusual and can think of no other case where that is done using Bluetooth, but that is how it works for Handoff & Continuity.
    The following are the other things needed from Connect your iPhone, iPad, iPod touch, and Mac using Continuity
    How to get started:
    Sign in to the same iCloud account on all your devices.
    Turn on Bluetooth on all the devices you want to use. Make sure your devices are near each other.
    Connect all your devices to the same Wi-Fi network.
    Turn off Handoff
    To turn off Handoff on your iPhone, iPad, or iPod touch, go to Settings > General > Handoff & Suggested Apps, and turn off the setting.
    On your Mac, go to System Preferences > General and deselect the option to allow Handoff.
    Phone calls
    With Continuity, you can make and receive cellular phone calls from your iPad, iPod touch, or Mac when your iPhone is on the same Wi-Fi network.
    To make and receive phone calls, here's what you need:
    Sign in to the same iCloud account on all your devices, including your Mac.
    Your iPhone and your iPad or iPod touch need to use iOS 8 or later. Your Mac needs to use OS X Yosemite.
    All devices must be on the same Wi-Fi network.
    All devices must be signed in to FaceTime using the same iCloud account. This means any device that shares your Apple ID will get your phone calls. Look below for instructions on how to turn off iPhone cellular calls.
    Wi-Fi Calling needs to be off. Go to Settings > Phone. If you see Wi-Fi Calling, turn it off.

  • Problems with WiFi after upgrade

    I have an Ipod Touch 16gig second generation. I recently Upgraded to version 3.1.2(7D11). After the update my WiFi does not seem as stable and I cannot connect to networks in locations that I once could. Even in my home network the signal strength appears way lower than before the update. Is anyone else having this problem? Is it something I did wrong and is there something I can do to try to rememdy this? Thanks for any input.

    I have a 2nd gen touch. Last week I finally updated it to 3.1.2, and, along with my touch, updated my lap to the newest itunes and safari. Before, with the old software (I've been overseas since April so I adn't updated my pod for a very long time) my ipod could easily find unlocked wifi and join onto the network. It was great on the net. I used a wifi finder app that was fantastic. Now? My app doesn't open, itunes refuses to update any of my apps and my touch shows it has wifi but won't go online.
    I've done everything recommended; reset all settings, reset network settings, restored...you name it. Still nothing. I'm so frustrated. If I had known that this would happen, I would never had updated. Leave well enough alone. I only updated because all of the new game apps wouldn't be supported by my software. I wanted to play Sims 3. Irony is, now that's all I can do on my touch now.
    Advice from anyone? Lord knows I can't go to apple itself. My warranty is up and unless i pay, they won't help.
    Gee, think they'll start noticing that there's a fair amount of people having the same problem and maybe, just maybe, they should fix the bug...and not charge for it!! Angers me even more. I had to pay money for software that made my podly sick.

  • Anyone having problems with 4s after upgrading to the 5.0.1 Software

    My iphone 4s was working perfectly fine before i upgraded to the 5.0.1 software. Now i cant make calls or receive. Everytime i try to make a call its say " Call fails" and then its searches to connect to the network. I have tried restoring it 3 time to the factory settings in itunes but it still has the same problems. It has to be something with the 5.0.1 software as my phone worked perfectly fine before.  Is there anyway to go back to the 5.0.1 software?

    I found this workaround and it worked for me. 
    "According to Hontz, the issue seems to be affecting only iPhone 4S users. Hontz has provided the following workaround to fix the issue:
    1) Open the Phone and dial *228. This is a Verizon over-the-air programming number. 2) When the system answer press 1 for “Program or activate your phone” 3) Wait for the call to disconnect. You should get a prompt stating something like, “Settings updated.” 4) Open the Task Manager (double click the home button) and kill the Phone, Message, and Contacts Applications 5) Wait a few minutes (I waited 3 just to be extra safe) 6) Open the Message App to verify the fix.
    If you are still broken, kill the Message App again, then reboot your phone.
    Did iOS 5.0.1 also mess up your iPhone Contacts? Let us know if the workaround helped."
    via: TSF

  • Problem with Wifi after upgrade to WIN10

    I have Idea Center B300 AIO desktop with RTL 8192 Wireless adaptor. Wifi is not working after I upgrade to WIN10 yesterday.  I am not getting WIN 10 beta drivers also on URL http://support.lenovo.com/us/en/downloads/ds102364 but could not get for my desktop.

    hi pramodlele,
    If you look under Device Manager > Other Devices, do you see a Network Controller entry?
    If yes, have you considered installing the Win7 driver and running it in compatibility mode?
    Wireless LAN Driver - Windows 7 (32-bit, 64-bit)
    RTL8192SE and Windows 7 Drivers
    Alternatively, you can also right click on the Network Controller > choose Update driver software > Search automatically for updated driver software and observe.
    Let me know how it goes.
    Regards

Maybe you are looking for

  • Adobe Bridge Tools Illustrator scripting

    Hello! I do a lot of processing of PDFs. In Illustrator I resize them, resize the artboard, save as .ai, then export a TIFF. I notice in Bridge under tools, there is an ILLUSTRATOR menu. How difficult would it be to create in bridge a menu item that

  • I need to file a compliant to Corporate since the store is no help!

    First of all I want to say that I am HIGHLY disappointed and upset with the service I received from your Fair Oaks, VA Store. I been going to this location for years and I haven't ever had an issue until I purchased a new phone with your mobile depar

  • Looking for an App to Lock the Screen while Playing a Movie

    I've been looking for either an app to lock the screen (not turn the screen off like the button on top of the phone) while playing a movie or a media player that will prohibit you from pressing buttons while a movie is playing. The reason I'm looking

  • Question on classpath  and path

    path=.;D:\j2sdk1.4.2_04\bin;D:\j2sdk1.4.2_04\tomcat4.1\bin classpath=.;D:\j2sdk1.4.2_04\bin;D:\j2sdk1.4.2_04\tomcat4.1\common\lib\servlet.jar it work well in J2SE but doesn't work well in servlet what's wrong?

  • Catalyst 6500 CSM-S Cookie stickiness timout ?

    /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0cm 5.4pt 0cm