Having problems conecting wireless router to wii

How do you do it?

I have the model WRT54G. i have gotten online but am not able to connect to any opponents when playing. The connection to my opponent keeps getting lost. At first there were no logging in problems but I am also being kicked off once in a while now I just bought it today. I need help badly. If it helps the game I am playing is madden 08.

Similar Messages

Having problems connecting wireless?

Hi All,
I just got my MACBOOK two days ago and having some issues connecting wireless.. I can connect to my LINKSYS wireless router but it seems after about 7 mins of use I can no longer connect to the router. I have reset the router and even changed it but I still seem to have the same issue.
If I use only PC's on my wireless network I don't have any issues.. It seems like the MAC messes up my network and it will not work again unless I take the power out of the router and then modem.
I have used my comp at a friends house connecting to their linksys router without any issues.
ANY IDEAS?
THANKS

If you have no problems connecting wirelessly on another network, then I'd look at your router as the probably culprit. Do you have any problems connecting to the router by Ethernet cable? Are your Network preferences configured properly? Have there been any firmware updates released for your router that you have not installed? Have you tried a different router in your home network? For example, try a D-Link DI-524. I've had good success with it. I've never had a really satisfactory experience with LinkSys, but that's my personal experience.

Problems after wireless router (WRT310n) firmware update.

I updated the firmware on my wireless router (wrt310n) yesterday and now I am having major issues connecting my laptop to it via wireless. After the update, I reset the router as well as unplugged the power source. Once the update and everything was reset, I re-entered all my settings and set the computers back up using the LELA. I go to change the laptop to wireless and it says it can't connect to it. I did the LELA update on the laptop thinking that would fix it, but it didn't help. However, the whole time I am able to connect to the router using a ethernet cable. I turned off all of the encryption settings, firewalls, and broadcasted my SSID. I searched this forum for some help and one topic suggested somethings, which I did, and I was able to connect wirelessly with the encryption. I thought I was done and set-up, until later that evening. I turned the computer back on only to see the same problem again. I decided to deal with it the next day (today) by uninstalling LELA and just using Windows to configure my wireless settings. As soon as I uninstalled LELA, entered the key into the Windows program, it worked like a charm. Until tonight, when I turned on the computer. Now I'm connecting to the network wirelessly, but it says "Limited or no connectivity." Acting like there is no encryption key entered. I go to "View Wireless Networks" and it says "WIndows cannot configure connection. If you have another program to manage this wireless connection, use that software." The thing is, I don't have another program on here to manage a wireless connection. Sorry for the long post. I figured if I didn't type everything out, people would have just asked me questions. I had no problems with this router until I did the update yesterday. If it can't be fixed, is there a way to revert back to the old firmware? Thanks in advance.

Well you should adjust the Wireless Settings on your router...
Open an Internet Explorer browser page on your wired computer(desktop).In the address bar type - 192.168.1.1 and press Enter...Leave username blank & in password use admin in lower case...
For Wireless Settings, please do the following : -
Click on the Wireless tab
- Here select manual configuration...Wireless Network mode should be mixed...
- Provide a unique name in the Wireless Network Name (SSID) box in order to differentiate your network from your neighbours network...
- Set the Radio Band to Standard-20MHz and change the Standard channel to 11-2.462GHz...Wireless SSID broadcast should be Enabled and then click on Save Settings...
Please make a note of Wireless Network Name (SSID) as this is the Network Identifier...
For Wireless Security : -
Click on the Sub tab under Wireless > Wireless Security...
Change the Wireless security mode to WEP, Encryption should be 64 bit.Leave the passphrase blank, don't type in anything...
Under WEP Key 1 type in any 10 numbers please(numbers only and no letters eg: your 10 digit phone number) and click on save settings...
Please make a note of WEP Key 1 as this is the Security Key for the Wireless Network...
Click on Advanced Wireless Settings
Change the Beacon Interval to 75 >>Change the Fragmentation Threshold to 2304, Change the RTS Threshold to 2304 >>Click on "Save Settings"...
Before you attempt to connect to your wireless network you should first check your Programs menu if there is any Wireless Program(like 'Intel Proset' , 'Dell Wireless WLAN' , or anything that gives you a clue of a Wireless Program/Utility/Software)...You should use the Wireless Utility/Software(if any) to connect to your wireless network and not the Windows default Wireless Program to avoid any conflicts...

Having trouble connecting Wireless Router to Network

Hey everyone, I ordered two Encore ENHWI-2AN3 wireless routers and am having trouble configuring the one I want to use as the wireless access point (other one will be used as a repeater.)
I followed the advice here
http://forums.verizon.com/t5/FiOS-Internet/Wireless-Router-Doesn-t-Work-After-35ft/m-p/206716/highli...
I disabled DHCP, and set a new IP on the local network. I disabled WiFi on the verizon router as well. When I run an ethernet cable between the two using LAN ports, and try to use WiFi I get a signal, but it doesn't go load.
I'm assuming I need to tweak something in the "internet" section of the Encore router, the main options are Dynamic or Static IP, PPPoE, PPTP and L2TP.
To clarify, I am not looking to replace the Verizon router, only use the Encore router for Wifi

kimdpb wrote:
Wireless is working for all the other devices
Using a Cisco router with Network Magic Interface....it doesn't see the Mac Book but the Mac sees the network.
Can you see the network in the Mac's wireless network list?

Problems with Wireless Router and Adapter

I tried posting this in the wireless adapter forum but nobody responded :-(
I'm using a WRT54G Router btw, and the firmware is v2.02.7, Feb. 27, 2004.
Hi everyone,
I have a Linksys Wireless G Router and several computers that I try to connect with. One of them is a computer running Windows XP and using a Linksys Wireless USB B Adapter (WUSB11). Another is a laptop running Mandriva Linux using a Linksys Instant Wireless Network PC Card (WPC11). Another one is running Windows Vista and using a Linksys Wireless N card. I also have a laptop running Windows XP using a Linksys Wireless-G Notebook Adapter (WPC54G). I also have another PC running Windows XP and uses a Linksys Wireless USB Adapter WUSB54G. Finally, I have two macintosh laptops running OSX and with airport devices installed.
Anyway, I have problems with my internet connection frequently being interrupted and even sometimes I won't have a connection at all for hours. This occurs with my Linux laptop, the PC with the Wireless B Adapter, and the laptop using the Wireless G Notebook Adapter. In addition to this, the macintosh laptops have internet even more infrequently. However, I seem to never have a problem with the Windows Vista desktop or the Windows XP desktop that has the Wireless G adapter. I try repairing the connection and often it does not work. I have also tried resetting the router and the cable modem. I'm not sure what else I can do. I even bought a Wireless N router and had little success with that. We even went as far as moving the wireless router upstairs into our living room, thinking that the signal was somehow suffering from interference or that distance was a factor. Anyway, sorry for the long post but I could really use some help!
Thanks.

Hi… logon to wireless N router’s setup page, open I.E. an in the address bar type 192.168.1.1 it would ask for username and password, put "admin" as a paassword (default password) without any username...linksys setup pops up, click on on wireless tab and and try changing radio band to wide 40MHz, wide channel to 9 and wireless standard channel to 1 or 11, go to advanced wireless settings reduce beacon interval to 50, fragmentation and RTS threshold to 2304, change N Transmission rate to 270 MBps…also try upgrading latest firmware on router, check whether it makes any difference or not and let me know.

Still having problems with wireless connections with the new lions os

is anyone else still having problems with there wireless connections on the new lions os? What a poor job apple did

No.

Having problem with wireless connection

Hello Everyone,
Ok, just like what the title says.. I had a roomate before that had the acct. and moved out with his account. I used to share Internet service with him using a WRT54G router and everything was fine. Since he moved out I had to get my own one on my name and started using the same router, but this time I decided to put a security on it, I lost my CD, so I decided to go to linksysfix and download the program. I installed it on my lap top and everything is working good, except for the desk top that my brother has. His also connected to the router that I have but cannot connect on the wireless, the desk top used to work before I downloaded from linksysfix. We can see the network name and the signal is high but won't connect and cannot go online. It's kinda weird, wireless used to work before the reset and installing from linksysfix. My lap top is working great, no problem with it, just the desk top. Desk top works using wire, but the wireless function is not working. Called tech support for linksys and dynex for wireless card and did not do the job. Last night I was trying still and was able to connect wireless on some network called STREAM, not sure where it is, but they're homepage shows up. anyway, any help would be greatly appreciated.. Thanks
Ricky

Go to: Start Menu>>Control Panel>>Network and Internet Connections>>Network Connections. In this window look for your wireless connection icon and right click on it, then click on properties. Here you will find the wireless tab to set up your wireless card.
1.security = either WPA or WPA2
2.Encryption = TKIP or AES
3Security Key = whatever you decide to choose =Wwd3Rtt29PlsM =example
***Also you should plug in you wireless computer with the wired Ethernet cable while you are doing this, then dissconnect.
Good Luck,
ttech
Message Edited by Ttech on 06-19-2008 07:38 PM
Message Edited by Ttech on 06-20-2008 03:15 AM

Having problems extending wireless network

I'm trying to extend a wireless network using a number of bits of hardware and would like to know what is the best way of doing it. I've had a good play around with things already, and have read a few tutorials/forum posts but I don’t think I've quite got it right.
The problem:
The current position of the wireless modem/router is in an upstairs room at the front of the house. While this works well with internet connectivity generally (Apple TVs are connected wirelessly in two upstairs front rooms and the living room downstairs, also at front), there is poor signal at the back of the house downstairs where we have another Apple TV that keeps dropping out.
This Apple TV is on the other side of what was the house's external brick wall (the house was extended, so this is now a kitchen/diner that is in a conservatory extension). So a floor, some distance and a brick wall separate this Apple TV.
What I have tried:
Initially I tried using an Airport Extreme Base Station (AEBS) to extend the BT Home Hub (BTHH) signal but had problems with this. According to BT, it should not be possible to extend the network in this way. So instead I tried this:
In upstairs front room:
* BTHH - transmitting 1 wireless signal (which I *could* use but …)
* Connection from BTHH ethernet into AEBS which is then transmitted wirelessly (And *this* is the wireless network I will use for Home Sharing/Apple TVs)
Downstairs, near back of house:
* An old Airport Express (first gen A1088 device), which I configured to extend the existing wireless network (the one transmitted by AEBS, not BTHH). No physical connections here - it's just done wirelessly
This *appears* to be OK, at least from from Airport Utility tells me (I used an older version - 5.6 - to configure the Airport Express, V6 to configure the AEBS). However, the proof is in the pudding, as they say - the Apple TV with the weak signal remains weak (3/5 bars according to Apple TV signal strength indicator), despite the Express being just a couple of feet away inside the house.
So, what can/should I do?
I think I have some more options. I have Powerline sockets that I can use, so I could connect ethernet in the upstairs room and then have the socket downstairs plug straight into the Airport Express.
What is the best way to set it up?
BTHH ---- ethernet ----> [Powerline] ---- ethernet ----> Airport Express
BTHH ---- ethernet ----> AEBS ---- ethernet ----> [Powerline] ---- ethernet ----> Airport Express
Or is there a simpler way I could do it?
I know that I *could* do this:
BTHH ---- ethernet ----> AEBS ---- ethernet ----> [Powerline] ---- ethernet ----> Apple TV
And have that TV use a wired connection instead of wireless, but I'd prefer not to do that for a couple of reasons:
1) The TV is against a wall, with limited space behind for cabling/sockets and there is no immediate power supply (so I'd have to run it all through trunking)
2) It's better if I can extend the wireless signal generally, not just for that Apple TV, but for all devices that might need to connect at the back of the house.
Appreciate any suggestions of what I can do here. I know this is a long note, but I wanted to be clear about what I have tried, what I've got at my disposal, etc.

Thanks for the welcome.
I have checked the settings and have set both up from scratch a number of times. The TC is set to allow the network to be extended and the Express is set to extend the network and to allow wireless clients.
I have also tried a number of different positions for the Express including in the same room without improvement. The network extension does work but with a significant deterioration in network performance when connecting via the Express. I would expect some deterioration in performance for the signal to pass from Express to TC but this seems extreme. The effect is even more pronounced with iPhones (3GS, 3G and 2G). the connection is actually quicker over the mobile network even for the 2G phone.
Cheers

My Mac is 15 months old and all of a sudden it has started resetting the time and date then I get a message saying not all apps will work because of the pre Jan date any help as to why ? Causing problems with wireless router.

My Mac book pro is 15 months old and now suddenly it has started resetting the date and time, causing problems with applications and my wireless access. Any suggestions as to why this is happening and how to fix it?

Seems the time isn't being saved to your computer correctly, it may be a corrupt file that isn't saving the time anymore.
You can move the
com.apple.systempreferences.plist
file out of your Users/Library/Preferences folder to the desktop and reboot.
then go to your System Preferences > Date and Time and set a time server close to your location (or in your time zone)
(trash the file on the desktop if no ill issues occur later on)
or you can follow/bookmark these support docs to reset your PRAM and SMC (and for future reference)
http://support.apple.com/kb/TS2570
http://support.apple.com/kb/TS1440
http://support.apple.com/kb/HT1455
http://support.apple.com/kb/ht3964
http://support.apple.com/kb/HT1379
http://support.apple.com/kb/ht1379
http://support.apple.com/kb/HT1509
I don't remember exactly where OS X is keeping it time settings now, but I think one of those choices should help resolve your issue and won't hurt anything giving them a shot. Perhaps someone else could refresh my memory.

I'm having problems conecting to wifi with the ios 6 update

i download and install the ios 6 on my iphone 4s and now i can't conect my phone to a wifi network it shows a log in page that doesnt work what can i do or what is happening?

Try: Settings > Reset > Reset Network Settings.
If that does not work it is probably a hardware issue and you will have to get it serviced.

Having problem with wireless symbol on my mac greys out allot but is still connected and working on the Internet. Does this mean anything?

When my new mac is switched on (running lion) and on the Internet and working fine, occasionally the wireless symbol keeps greyish out but the Internet etc is still working fine. Does this mean anything?

Hello,
My first guess would be some kind of interference, any TVs, Phones, Microwaves, neighbors, etc. around?

HT5622 Hi, my name is luis Burgoa. I'm having problems conecting my devices (phone & Ipad) to my computer. They were link until last month,but somehow everytime that I conect either of them thru the usb cord. I can not see them on my ITUNES. Please help.

I can not conect my IPAD & IPHONE to ITUNES, please help

Hello Luis,
Thanks for the question. I understand that your devices are not recognized in iTunes when connecting to your PC. The following resource deals with this symptom and has some great troubleshooting steps that may resolve your issue:
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
Thanks,
Matt M.

Im Having a Problem with my wireless router

Hey all,
im having a problem my wireless router keeps dropin my net only way i can get back online is unplug the power cord on back of the router then plug it back in i try unplugin my cable modem and plug that back in before i unplug the power cord from my router i try seein if it was a cable modem problem but it wasnt so..its all in the router itself havin a problem.
Router: WRT54GS
i got two computers and xbox wired hook up to the router and laptop is wireless.
im thinkin my router already goin bad and i got it this year too.
i try goin to the live help on linksys site and they seem to be a computer person that was helpin me then some1 real so..i was hopin u all can help me more on my problem.

1) Try to keep the router in higher possition.
2) Try to use the device in the same room or open area.
3) You may try changing the wireless channel, default channel is 11, try to configure channel 6.
4) Upgrade the firmware.

HELP; wireless router working on iMAC but SUPER SLOW !!

I have consistently been having problems with my router WRT54G version 5
where download speed is very slow, I cannot even watching streaming video
without interruption every few seconds. I thought the problem was with my
bandwidth speed so today I upgraded my plan with my ISP and they told me to
do a speedtest to check that it was already upgraded.
I have a Windows PC located next to the WRT54G version 5.  I attached the
PC directly to the modem and got close to the speed allowed by my ISP.
I tried the PC on the WRT54G connected via ethernet cable and got dismal
rates of 500k to 600k download speed.
I have an iMAC in another room and also tested it via wireless on the WRT54G.
Initially, I got close to the max speed of my ISP. Tested again a few minutes after and got download speed of 1,300 kbs. Tested again and got 1,000 kbs. Then now about an hour later, i tested again and got very slow speeds of 600-700k download speed. Note that I did not move my iMAC from its location while conducting these differnt speed tests. The problem cannot be with my ISP because directly connecting to the modem without a router achieves the desired download speed. Its only when I use the router that i get wide results and now, my connection remains intermittent.
What can be wrong? I dont have any interference.
It was suggested to change the channel of the router but must update firmware first. But firmware does not come in MAC version.
Any other ideas? Help ... i am desperate!! Now i feel stupid upgrading my bandwidth when that doesnt seem to be the problem at all.

You can connect your pc to router, download the latest firmware for wrt54g v5 and upgrade it. After upgrade reset router and then reconfigure it once again. Then do the speed test you will receive excellent speed.

Having problems trying to install ipod

I keep running the install disk and it asks to connect the ipod to see if it needs to be formatted. I do this and it says that it is rebooting the ipod...then it says to press the format button again. It will do this a couple times then say that it is having problems conecting to the ipod and to disconnect and re connect the ipod. If i do this it keeps happening...does anyone know how to fix this or what to do?

Welcome to Apple Discussions.
Don't use the CD. Instead download the latest version of the iPod software updater, and install it. Run the updater, connect the iPod when told (but not before), and choose to restore.
Note: If you do not have iTunes installed you should download iTunes and install it first before attempting the above.

Having problems conecting wireless router to wii

Similar Messages

Maybe you are looking for