Having problems connecting an AirPort Express in client mode to a Linksys?

I have a Linksys WRT150N as my main access point. I recently dumbed down its security to WPA2 Personal so a Dell, and Xbox 360 could get on it wirelessly. Unfortunately, my AirPort Express refuses to connect now even after re-configuring it to use WPA. Its light just blinks Amber.
Does anyone else have an AirPort Express connected in client mode to a Linksys access point using WPA Personal security? I vaguely recall that I had this problem before, and solved it by using WPA2. Perhaps it's time to get an Apple TV for playing music on the home theater...
Thanks.

Hi, Bill! Actually, no--the AE is creating its own wireless network with the same SSID and password as the Time Capsule. I had big problems with bandwidth degredation when I tried to extend the network like that.
But I believe I tracked down the cause of the issue--the powerline adapter was losing its connection with the other powerline adapter for some reason. Still observing that one, but all the Apple stuff appears to be operating normally. Thanks for the replay anyway!

Similar Messages

Connecting an Airport Express in client mode causing problems

Hi! I have an Airport network set up in the following way:
Time Capsule set up as the main router
Airport Express connected to the Time Capsule in bridge mode via powerline ethernet to form a "roaming" network. It has the same SSID, password and encryption as the Time Capsule network.
Everything has been working great, but recently I tried adding another Airport Express wirelessly in client mode so that I could stream music from iTunes to it. Since then, after a period of time, the part of my house with the AirPort Express units loses its ability to connect to the internet wirelessly. It still picks up the wireless signal--I just can't connect to the internet. If I wander to the area covered by the Time Capsule, however, wireless internet works fine.
Unplugging the client mode Airport Express fixes the issue, so obviously that is the source of the problem. Has anybody ever heard of this happening with a similar setup? Thanks!

Hi, Bill! Actually, no--the AE is creating its own wireless network with the same SSID and password as the Time Capsule. I had big problems with bandwidth degredation when I tried to extend the network like that.
But I believe I tracked down the cause of the issue--the powerline adapter was losing its connection with the other powerline adapter for some reason. Still observing that one, but all the Apple stuff appears to be operating normally. Thanks for the replay anyway!

AirPort Express in Client mode

If you configure a current (summer 2012) simultaneous dual band AirPort Express in client mode:
1) are both the LAN and WAN ethernet ports available or only one of them, the LAN port presumeably?
2) If you unplug the ethernet cable momentarily to connect a different device, does the AX drop the wireless connection or is it maintained?

1) are both the LAN and WAN ethernet ports available or only one of them, the LAN port presumeably?
Both ports operate as LAN ports in this type of setup, since the Express will be configured in Bridge Mode automatically.
2) If you unplug the ethernet cable momentarily to connect a different device, does the AX drop the wireless connection or is it maintained?
Wireless will be maintained, but you may need to power off and restart the Express.
Better practice would be to power off the Express before you disconnect the cable(s), connect the cable(s) again, then power up the AirPort Express.

Does the ethernet port work when the using airport express in client mode?

I am considering using an airport express to extend my existing wireless network to a room where I can't get a cable to.
I will need to connect a at least 3 devices to the airport express.
The questions are:
- is an airport express the right answer to this problem?
- if so, does the ethernet port work (AE on client mode) as a passthru into the main network?
- can I plug a hub to it?
Thanks
RFSF

Hi Tesserax,
Really appreciate you taking time to respond.
I stopped by the Apple store this weekend and one of their sales people ( not one of their genius bar people) told me NO to all questions. I tend to believe more answers from people in this forum but just realize that I have not mentioned one possibly important point:
the main AP to which I will be connecting the airport express is not an Airport Extreme/Express AP.
Thanks,
Ricardo.

HT1515 how to setup airport express as client mode

How do I setup my airport express as clint mode? I have a printer that I want to use as a wireless printer. The printer is usb only printer. I want to use the Airport express to be able to connect to the existing network as client and be able to print wirelessly.

The AirPort sets itself up in client mode automatically whenever it is configured to "extend" or "join" a wireless network.
If you have an Apple router, the Express will configure itself to "extend" the wireless network, which will provide more wireless coverage in the are where the Express is located and enable the USB port, so that you can attach a compatible printer and configure it to work with the network.
If you do not have an Apple router, the Express will attempt to "join" the network, which will also enable the USB port. The Express does not provide any additional wireless coverage when it "joins" a network.

AirPort Express in client mode with WEP

I just bought an AirPort Express that I'd like to use in client mode so I can stream music from my laptop to my stereo. I have an existing wireless G network supported by a Netgear WGR614v4 router, using 64-bit WEP encryption. My laptop is a Dell Studio 15 running Vista Home Premium, and it has a Dell Wireless 1387 card.
I know there are some reported issues with AE and WEP encryption, but for whatever reason my laptop doesn't connect to WPA networks, so I'm stuck on WEP. I've been using WEP 64-bit, so I attempted to setup the AE to work with that. The AE was connected directly to my Netgear router, and I installed the AirPort Utility software on my Dell laptop. Went through the setup, entered my WEP passkey, and then got to a screen where I clicked "update AE" or something of that sort. It then showed a windows with some upload bars on it that made it look like it was doing something, but it finally resulted in an error message saying the AE could not be found following the update. After looking for help, I stumbled across the following thread:
http://discussions.apple.com/thread.jspa?threadID=1765010&tstart=0
which in Step 6 he mentions this "error" is normal. That gave me hope, so I disconnected the AE from the router and moved it to the other room where my stereo is. Plugged in the mini cable, then plugged the AE into the wall and allowed it to run its setup sequence. Eventually I had a solid green light, so I figured I was in good shape.
Problem is that I then opened the AirPort Utility software on the Dell laptop to complete the setup and activate AirTunes, but the AirPort Utility doesn't show the AE connected. If I log into my router utility though, it does show the AE as one of the devices on my network, so somewhere there is a disconnect. After reading some more, I realized I could manually connect via AirPort Utility by entering the AE IP address and password. Tried this and it seemed to work because it showed the info for my AE, but when I closed that window it was gone. I figured maybe that's just a bug with AirPort Utility, so I closed it out and went to iTunes, hoping to see the option for selecting AE as the audio output, but it's not there.
I've tried almost everything I can think of, but I'm having no luck. At times I feel like I'm even making negative progress because I'll start everything from scratch and it will get hung up at a step earlier in the process. For instance, right now I've just restarted from scratch and the AirPort Utility can't even connect to the AE to do the initial setup. For some reason, following a Factory Default Reset, and with the AE connected directly to the router, it now boots up to a solid green light, shows up in AirPort Utility under a default base station name, yet the AirPort Utility can't connect to modify my wireless settings.
Does anyone have any advice?

1) are both the LAN and WAN ethernet ports available or only one of them, the LAN port presumeably?
Both ports operate as LAN ports in this type of setup, since the Express will be configured in Bridge Mode automatically.
2) If you unplug the ethernet cable momentarily to connect a different device, does the AX drop the wireless connection or is it maintained?
Wireless will be maintained, but you may need to power off and restart the Express.
Better practice would be to power off the Express before you disconnect the cable(s), connect the cable(s) again, then power up the AirPort Express.

How do I reconfigure my Airport Express in client mode?

My home uses an AT&T U-Verse wireless network to connect to the Internet. I also have an Airport Express hooked to a USB HP Printer to create wireless access to the printer. With a change in U-Verse service, AT&T replaced my network interface with a new box, connected that box to new port at the sub-station, a new wireless network name and a new wireless network password. Now everything works except my "wireless" printer. I suspect that the issue is that the Airport Express has the wrong network name and password, but cannot figure out how to change it. My Airport Utility is version 6.3.1 and it does not find my Airport Express. My Airport Express is an older one and I can find no model number on it anywhere. How do I reconfigure my Airport Express.
Previously when trying to install an Airport Extreme on my system, I proved with several long conversation with Apple support that it would not work with the U-Verse system. I had to take the Airport Extreme back and use two USB hard drives for Tim capsule backups, one for each computer.

AirPort Utility 6.3.1 will work with the AirPort Express A1264, so something else is amiss.
Power up the AirPort Express for a few minutes, then hold in the reset button on the Express for 10-12 seconds and release. Allow a full minute for the Express to restart.
Open AirPort Utility
Click on Other WiFi Devices
Click AirPort Express
That should allow you to reconfigure the Express

Those having problems connecting to AirPort Extreme/Express in Windows XP

Today, I just bought an AirPort Extreme and had no problems setting it up and connecting to it in Mac OS X. Well, I booted Windows via Boot Camp and wasn't able to connect to it at all. I had no idea why when my network was being broadcast and had a very strong signal. Well, I did some searching and found out the cause. Well, I had my network secured via WPA2. XP does not support WPA2. Microsoft released a Hotfix that addresses this problem.
This website explained the problem.
http://docs.info.apple.com/article.html?artnum=305275
This website is where you can download the hotfix.
http://support.microsoft.com/kb/917021
After I downloaded that hotfix, I was able to connect to my AirPort Extreme in Windows.

It sounds like your room mate has set up WEP security on this base station. If you cannot convince her to use WPA (a more secure protocol that is also less problematic to use cross-platform) take a look at the advice and tips for Windows XP and Vista found at http://tech.ifelix.net/airport.html

Can't connect to Airport Express using Linksys WRE54g?

I am having problem connecting to Airport Express using Linksys WRE54G, under the following circumstances.
Here's my setup.
I am using Linksys WAG200G modem/wireless router in the studies. My house is fairly big and very weak signal in living room. Hence I added Linksys WRE54G Wireless-G Range Expander in living room.
I have two HiFi. One in studies and the other in living room. macbook and external HDD where I store all my musics sit in studies.
I use Airport Express (AE1) to stream music from macbook to studies HiFi. Works fine.
So I connect AE1 to living room HiFi. Macbook still in studies. The problem is iTunes cannot connect to AE1 now. However I still able to detect AE1, open/change settings using Airport Utility on macbook in the studies.
Now I bring macbook to living room. AE1 works!
What I intend to setup is,
1. WAG200G, macbook and external HDD in my studies.
2. AE1 connect to studies HiFi. I am planning to get another Airport Express for living room HiFi.
3. Control the playlist using iPhone Remote and listen music in living room.
Question:
1. Did iTunes connect directly to Airport Express without going thru network router?
2. How should I setup Airport Express in this case?
Appreciate anyone who can help me on this. Thank you.

pss.
actually, is it possible to do what i'm trying to do... the guy in the Apple store said that i can connect to the Netgear router for my internet connection, and Airfoil can separately connect to the Airport Express to play music...
the way i've set it up so far, i can do either, but i can't do both... or do i need to somehow connect both wireless stations together...??

I set up Airport Express as Client, I can no longer connect to my wlan

I set up Airport Express in Client mode so that I could use Airtunes. My Router/modem is a netgear one and I use WPA.
I can no longer connect to my wireless network from my ibook.
If I plug in the ethernet to the router I can. I can also then see from the router that Airport express has connected itself to the router.
So what do I have to do to be able to reconnect to myibook to the WLAN?

Double-check these settings on your iBook:
System Preferences > Network > Show > Network Port Configurations
- Verify that an AirPort option exists. If it does not, click "New" to create one. - Verify that AirPort is "On" (checked)
- Verify that AirPort is at the top of the list. If it isn't, you can drag it to the top.
Systems Preferences > Network > Show > AirPort
AirPort tab
- By default, join: Automatic
TCP/IP tab
- Configure IPv4: Using DHCP
- Configure IPv6: Automatically or Off
Proxies tab
- Configure Proxies: Manually
- Select a proxy server to configure: <All proxies should be unchecked unless you specifically require a proxy for Internet access.>
- Exclude simple hostnames (unchecked)
- Bypass proxy settings for these Hosts & Domains: <leave blank>
- Use Passive FTP Mode (PASV) (checked)

Problems setting up AirPort Express Base Station

I'm a real newbie at this, so pardon the ignorance in advance haha.
I just bought a new Airport Express base station. I wanted to be able to stream my music via iTunes to my living room. I'm just having problems getting the aiport utility to recognize the base station. I have the base station plugged in and everything. Right now it is flashing the amber light.
This is my set-up. I have a Netgear WGR614 54MBPS wireless G router connected to my broadband modem. From the router I have it connected to my desktop thats running windows xp pro. The network is up and running just fine. I can connect via any laptop or other device with wifi. Now, how do I get my wireless router to pick up the base station? Do I have to wrong idea here or something? haha. thanks in advance!

In the Airport Utility for your Airport Express, you should set the Airport Express in "client" mode. You might have to connect your Airport Express directly to your router with ethernet cable, while doing this. If you are using encryption, make sure that you enter the encryption number onto the express that your router/access point is using. Again, if you plug the Express directly into the router, you should be able to modify the settings quite easily. Once you unplug the express, it will blink orange for awhile (maybe a minute), so wait a bit.
Good luck.

This past month I have been having problems connecting to my home wireless connection. Previously I had no problems whatsoever. I have tried unplugging the wireless router, turning off the wirless airport, deleting the network name from my list of server

This past month I have been having problems connecting to my home wireless connection. I have a MacBook Pro OSX Version 10.6.8. Previously I had no problems whatsoever. I have tried unplugging the wireless router, turning off the wirless airport, deleting the network name from my list of servers and trying to reconnect this way. These methods have worked temporarily, but the same problem keeps coming back. Most of the time my personal wireless connection does not even come up among the list of available networks. My fellow flatmates have PCs and both of them are able to connect to the network without problem.
The router is a d-link model DIR-615. I am not tech savy, so if any other information need to be provided in order to better understand my situation, please let me know.
Please help me!

If I open the list of networks in a window it says "connection timeout," but if I just select it from the drop down it tries for awhile and then stops with no prompt. When I try to run network diagnostics it says "sorry, we can't connect to the internet" (or some solution-free variation of that)

Problem with not getting Internet Connect on AirPort Express

Problem with not getting Internet Connect on AirPort Express (version7.6.4). Error says cannot get valid IP address. Have reset Siemens SpeedStream 4100 several time, even with tech support from the big "A" DSL provider. Plug MacBook Pro directly into modem and works fine. Unplugged AirPort, even reset it, still no luck. A bad Express?? or am not looking in the right place to make connection. Was working fine up until Sunday.

Connect the AirPort Express (AX) to the cable modem via Ethernet cable.
In configuring the AX using AirPort Utility:
Under Internet, set the connection to be Ethernet using DHCP.
Under Connection Sharing, set it to distribute a range of IP addresses.
Under AirPort>Wireless, set the Wireless Mode to Create a wireless network, and fill in the remaining settings in the same window. Until you get it working, you might want to set Wireless Security to None.

My two iMacs frequently go offline when I have our iPad and two iPhones-5 connected with Airport Express (2nd edition). If I disable WiFi on my three "i" devices no problem. Any thoughts on this?

My two iMacs frequently go offline when I have my iPad and two iPhones-5 connected with Airport Express (2nd edition). If I disable WiFi on my three "i" devices the offline problem stops. Any thoughts on this?

.....doesn't that seems to suggest the modem?
That is what I have suggested....twice now. From posts above:
My opinion would be that it is likely not the ISP, unless you have complete loss of Internet service for all devices at the same time......it is the Comtrend device....
and
I believe that the problem lies with the modem, and not the ISP signal.
Your ISP will likely have a different opinion, though. Please keep us posted on your progress.

IMac G5 (Rev. A) can't connect to AirPort Express

We have 2 Macintosh computers at home; one Mac mini G4 1.42GHz (model M9687LL/B) with built in AirPort Extreme card; and one iMac G5 (Rev. A) 1.6 GHz (model M9363LL/A) also with an AirPort Extreme card.
The mini was bought new, while the iMac was used when we bought it. When we bought it, the company (who were selling old Macitosh computers previously rented to other companies) installed and additional 512 MB of RAM (on top of the 256MB already in it) as well as the AirPort Extreme card. We then upgraded the OS from 10.3.9 Panther to 10.4.4 Tiger. Then we used a FireWire cable to copy the harddrive of my dads work computer (iMac G4) to the new one. We then took it home.
At home we had a linksys wireless router (model BEFW11S4) which we used to connect to the internet. Connected to this wireless network was an AirPort Express unit which we used to stream music to the downstairs stereo. However, the linksys router caused many problems, one of them being that everytime we started a computer, the router needed to be restarted to be able to send a signal so we could connect to the internet.
Eventually, we got feed up with this, and took the AirPort Express unit upstairs and replaced the linksys with it. We installed it, and it worked fine. Upstairs (location of Mac mini, the signal strength was always 4 or 3 (the little icon in the menu bar), but downstairs (where the iMac's located), the signal stayed at about 3, or sometimes 2.
After about a week, the downstairs signaled started to be more 2 than 3, but this made no real difference to us, since it still worked. Then, yesterday, it went down to 1, but still worked. Then, today, it stayed at 1, then totally disconnected. When we click the symbol in the menu bar, we can press on the wireless network to tell the computer to connect to it, but it only comes up with a box saying that the computer could not connect to it.
We have tried more or less everything to get it to work. Turning on and off the AirPort Extreme card in the computer, updating the AirPort Express firmware, restarted computers, the whole lot! But it still wont work!
My dad has borrowed an old iBook with a G3 800MHz processor running 10.3.9 Panther. The iBook has an AirPort card in it (not AirPort Extreme), but even downstairs, it gets full (or sometimes 3) connection. I even tried the basement, and it still works!
So my question is, why won't the iMac even connect to the network? Any help is greatly appreciated!
iMac G5, 1.6GHz, 768MB, AirPort Express Mac OS X (10.4.4)

I'm having a very similar problem with my iMac. I moved the airport down to the basement last week. Reception was at 3, but droped quickly to 2 and 1 and eventually the iMac lost the connection to the airport.
I brought the airport back to the office where the iMac is located and where the airport used to be, but I was unable to join the network again, even though the signal was received by the computer. I downloaded a widget for the dashboard that showed full strength of the signal.
While having these problems with the iMac, I don't have any problems connecting with my iBook to the network. Since I was able to connect to the airport via the iBook, I changed some of the settings, but nothing really helped except disabling wireless security. Agter that I was able to connect to the network via the iMac again, but only for a couple of minutes until the network disappeared again.
I'm reading about lots of other people having problems with the airport recently. So I suspect that this has to do with the recent OS X update. Hopefully somebody at Apple is looking at this problem right now!

Having problems connecting an AirPort Express in client mode to a Linksys?

Similar Messages

Maybe you are looking for