Having problems connecting things to both usb ports at same time
I'm trying to connect both Serato Scratch and an audio interface into each of the usb ports on my powerbook, but i'm having problems. Serato will register when plugged into either of the usb ports, but as soon as i plug my audio interface into the other socket, Serato instantly loses the connection. As soon as unplug plug the interface, Serato instantly registers again.
Is this likely to be a mac problem? Should i be able to have both usb ports connected to and both things registering?
This is driving me crazy. Any help is greatly appreciated!
It's known that Powerbooks don't put out alot of electrical juice onto the USB ports. If both devices are relying on power from the USB ports, that may be the issue. If so, solution is to get a powered USB hub, or if the devices will support their own power supply, get one.
Similar Messages
-
Having problems connecting two ipads to Internet at the same time
Hi everyone, new to here, would love any advise please. We have just received a new router from talktalk, DSL3680. The previous router had broken.
We are having trouble trying to connect to the Internet with my wife's iPad and mine at the same time. Which ever pad gets on the net first blocks out the other one.
One iPad is iPad 2, the other iPad 4th generation. They have different device names, but run off the same apple Id account. Never had any trouble with old router just with the new one. Both have up to date software. Regards WayneMake sure iPad is using DHCP and not Static IP.
http://i1224.photobucket.com/albums/ee374/Diavonex/d31cb33f5d6393546fc3f31487058 f6e_zps6467f438.jpg -
I cant be positive but I think this started when my iPhone did an automatic software update. I couldn't get any WiFi connection because when I go to turn it back on the iPhone wont let me and Greys out my WiFi on/off button.
But also I think something happened to my iCloud connect as well because next to my iCloud Drive under "Settings" it has that spinning symbol that usually denotes waiting for something to finish downloading. But this time it never stopped! Its been spinning saying "iCloud is Upgrading" for 2 weeks now! I have tried the on/off iPhone restart or reset, and I've even put my iPhone into "Recovery Mode" as a last resort. but when iTunes was finished "Restoring" it, nothing had changed; Still Greyed out WiFi button and iCloud is still "Upgrading"! Help please!Hi Ichin,
I am a bit confused with your statement -
if ((p_select_list is not null) and (p_text_field is not null)) then
return true;
elsif ((p_select_list is null) and (p_text_field is null)) then
return true;
else
return false;
end if;Here this statement -
if ((p_select_list is not null) and (p_text_field is not null)) then
return true;returning the result TRUE when both fields are not null
And this statement -
elsif ((p_select_list is null) and (p_text_field is null)) then
return true;returning the result TRUE again when both fields are null. If you see closely basically is not validating becoz it returning true whatever the input is.
I do not know what you want to use the second statement when you have else statement at the end. It will return false if one or both fields are null unless you want to validate either text field.
Hope this make sense.
Regards,
M Tajuddin
web: http://tajuddin.whitpeagesbd.com -
My problem - when syncing and error messages comes up: iTunes could not sync calendars to the iPhone because an error occurred while margin data." I've tried turning the phone off and back on, & tried both USB ports but get the same thing. What can I do next since it doesn't give me even one clue as to what the error would be?
Before I started to resync calendars one by one as suggested in the troubleshooting article, I remembered something that came up in a sync when I first attempted : a 'which one do you want to keep' message about a repeating calendar event, which came up with three options, one from Calendar, and two from iCal on the phone. I deleted that event, then went through the calendar resync one by one, and all seems OK now.
In Music there is a way to find 'ghost' items that show up as grayed-out on the menus, so that you can try to reassociate or delete them. It would be nice to have a similar way to work with Calendar!
Thanks for pointing me to the right article. -
Since upgrading to Mavericks, I have been unable to sync devices (specifically ipad mini and iphone 4s) to my MId 2013 Imac . They wil rapidly connect and disconnect, and I'm unable to do anything with the device. This happens with both USB ports. Any suggestions?
MacBook Air, OS X Mountain Lion (10.9.1)Obviously, syncing an iOS device with iTunes over USB is still supported in Mavericks. Calendar and contact syncing with iTunes is no longer supported. That has nothing to do with your problem.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Click the Clear Display icon in the toolbar. Then try the action that you're having trouble with again. Select any messages that appear in the Console window. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message (command-V).
When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some private information, such as your name, may appear in the log. Anonymize before posting. -
I have a mac book pro that both USB ports have stopped working one about a year ago and one recently. Is it possible to connect to another one of the other MBP's ports with a cord that ends with a USB port?
Thank you For your time and thoughts!
I went by the Apple Store and they told me that there was a "Flat Rate" repair service for this particular part where they would replace the logic board along with the USB ports for $350. Seems like best avenue. All of this would have been moot but my wifi in the computer also doesn't work so I was using my phone as a hot spot and tethering it to the computer for Internet access when the last port quit. This left me with no internet and no printing capabilities on the computer I use for my business. Basically became a nice paperweight. lol
They will ship it off Monday and I should have it back Thursday!
Again, thank you! -
Not sure that I have selected the correct forum. Hope my questions are clearly stated.
Having problems connecting iMac(late 2006) running 10.7.5 to a Samsung Flat Screen TV using separate audio/speaker cable and HDMI standard cable, mini-DVI to HDMI video converter. TV displays generic Apple galaxy background and "some" windows (e.g. screen resolution choices). It does not show Mail or Safari menus. System preferences' display "gathered" the Samsung and chose its resolution. I did not find a way to select the Samsung as my display.
In addition to having old hardware, we have Verizon FIOS providing internet and TV access. Is there any way to make this work for us? We would like to stream video (Netflix) and view shows from the Web. Do we need Apple TV to do this? Or is it not possible with our old iMac? My husband thinks that our Airport could be a factor.
Thank youLately, I have been seeing a lot of posts with users trying to use their Macs/iMacs to mirror their streaming video from their Macs to an HDTV.
There are, actually, many alternatives to choose from than just from a Mac.
You need to have or invest in a WiFi capable router for all of these examples.
Apple TV only integrates with WiFi and newer Mac hardware. So, if you want to have total integrated experience, if you have a 2011 Mac or newer, you might as well pay the $100 for the AppleTV box.
If you have a older Mac, like I have noticed many users do, then you have other options.
If you want to elimate long cable clutter and having your Mac at the mercy of your TV all of the time, you can still use the AppleTV box independently or purchase cheaper alternative media streaming boxes from Roku, Sony, Boxee or any number of electronics manufacturers that now have media streaming boxes and media streaming capability built into DVD/Blu-ray players.
These eliminate long cable clutter by being close to the HDTV where shorter, less expensive cables can be used.
Another alternative for iPad users is to use an iPad with the USB/HDMI video adapter and use your iPad as the streaming box. This ties up your iPad in much the same way as it does with your Mac, but again the iPad can be close to the TV and use minimal cables to the TV.
Another alternative to is to use a combination of an iPad and your Mac to stream content that is only available to stream online from a computer. In this case, you can use a desktop remote app on your iPad and Mac. A good and cheap Desktop Remote app is Splashtop Remote. This allows you to completely connect your iPad remotely, over Wifi, to your iMac desktop. The app streams both video and sound to the iPad which is still connected to your HDTV. The resultant stream video picture will be smaller than the size of your HDTV, but it will still be plenty large enough to watch. Again, if you own a iPad and an Intel Mac, this method also allows minimal cabling to the TV. -
Printer connected to Airport Express USB port won't come online after firmware 7.6 upgrade. I've tried backing up to 7.5.2, but it still shows offline. It is a Canon iP4600 printer and I'm running OS 10.6.8. I've powered everything down and still no go. I've connected the printer directly to my MacBook's USB port and it works fine. Any suggestions?
I have an iP4500, which I assume is quite similar to your model.
I had to reset the printing system to get things printing again. Only takes a few minutes and no problems at all since I did it a week ago or so.
Plug the printer into the USB port on the Express and restart the printer.
Open System Preferences (gear icon on the dock) and then open Print and Fax
Right-Click in the printer area on the left and select Reset Printing System
Then click the + (plus) button at the bottom of the printer list to install the printer again. -
Hi I am having problem connecting my mac and iphone6 through AirDrop
HI I am having problem connecting my mac and iphone6 through Air Drop
You don't give any information about your Mac but note the quote below which states that it must be a 2012 or later model with Yosemite installed. The quote is from Mac Basics: AirDrop lets you send files from your Mac to nearby Macs and iOS devices - Apple Support which also contains some other things that may help.
In order to transfer files between a Mac and and an iPhone, iPad or iPod touch
your iOS device needs to include a lightning connector
your iOS device needs iOS 7 or later installed
your Mac needs to be a 2012 or later model with OS X Yosemite installed
Your Mac and iOS device both need bluetooth and Wi-Fi turned on. You do not have to be connected to a specific Wi-Fi network. -
Having problems connecting a late 2011 Macbook Pro 2.2ghz i7 to a Sony KDL-32L5000 using a display miniport to DVI adapter (DVI to VGA cord). The TV is not detecting the macbook. Anyone have this problem?
You really have to mess with the resoluton, espescially the refresh rate, as it varies from projector to projector, monitor to monitor. Even within the same brand! Because so many manufacturers are trying so many different things to become the next cool kid on the block, and the way the formats are being configured that's now part of the game.
That's why so many professionally produced corporate shows hire a dedicated projectionist for the video presentations. Too many bugs in the honey.
Refresh & sesolution are the first things to look at.
Just so you know that colors in PowerPoint PC, and PowerPoint Mac, don't exactly match... go figure.
I forgot to mention another thing, sometimes it's the projector that needs to be tweaked. -
I am conneting my Ipad to mutiple Pcs, (windows and Mac) and it is not being recognized in the device list on itunes or the computers. the ipad is fully charged, I have reset it numerous times and it gives me the apple icon and then the "connect to itunes" message.... but dose nothing after that. I had it all set up and gave it to my daughter who tried to sync it with her macbook when it did this. We are using direct connections to the computers usb ports, the cables are new, ituens is newly updated on all pc's...
any ideas what the problem is??Did you already have a look at this article?
iOS: Device recognized in iTunes for Mac OS X -
I wanted to know if there is anyway i could automatically backup my time capsule to an external drive connected to it's usb port. I tried using automator to make it copy newly added files into the external but it didn't seem to work as i had hoped and i wanted to know if anyone had any experiences in using other programs to copy the contents of one folder in the TC to another folder in a drive externally connected to the TC and also keep the contents of both folders up to date.
In short, I am basically trying to make a "raid 1" and i know that TCs dont support raid natively so thats why i asked if anyone knows of a program that could do it from the mac side.
Thanks.Carbon copy cloner might work.. expect it to be very slow.. especially if you are using wireless.
There will be various rsync shareware available.. but like your experience getting it to actually work is loads of fun.. or NOT. -
I bought an iPhone 6 yesterday. I also bought a stereo dock that works with iPhone 5/5s. And a cord to connect iPhone 6 to USB port on my car stereo. No sound comes out of the stereo dock or car stereo. In Best Buy today, Sales Associate tried his iPhone 5 running iOS 8 on a stereo dock. It worked, but my iPhone 6 didn't. When will Apple fix this problem? Or is Apple pushing everyone to Bluetooth?
The iPod feature that plays through USB in my car does not work with my iPhone 6 either. I called AppleCare and they said that the car audio system will need a firmware update. Don't know if Apple is just passing the buck, but that is what I was told. Thank you for posting. I know now that I am not the only one. Thanks also for posting about the iPhone 5 running iOS 8. I gave away my iPhone 5 to a friend so I wasn't sure whether this is an iOS 8 issue or an iPhone 6 issue and your experience seems to confirm that it is a problem with iPhone 6. I guess I will just be using Bluetooth in my car, at least for now.
-
This past month I have been having problems connecting to my home wireless connection. I have a MacBook Pro OSX Version 10.6.8. Previously I had no problems whatsoever. I have tried unplugging the wireless router, turning off the wirless airport, deleting the network name from my list of servers and trying to reconnect this way. These methods have worked temporarily, but the same problem keeps coming back. Most of the time my personal wireless connection does not even come up among the list of available networks. My fellow flatmates have PCs and both of them are able to connect to the network without problem.
The router is a d-link model DIR-615. I am not tech savy, so if any other information need to be provided in order to better understand my situation, please let me know.
Please help me!If I open the list of networks in a window it says "connection timeout," but if I just select it from the drop down it tries for awhile and then stops with no prompt. When I try to run network diagnostics it says "sorry, we can't connect to the internet" (or some solution-free variation of that)
-
MBA will not allow me to use both usb ports at the same time.
My MBA will not allow me to use both usb ports at the same time. as soon as i plug the second in the first is disabled. trying to use a modem and printer.
What kind of peripherals are you connecting? Sometimes if an external device is drawing too much power, then it will shut down one of the USB ports. Make a test connecting two usb flash drives, it should work ok.
Maybe you are looking for
-
After latest upgrade, Aperture won't launch!
I downloaded the latest Aperture (v. 2.1.3) for my MacBook Pro, and lo and behold, it won't launch! I've tried trashing Preferences, same result. Any other suggestions?
-
Download and Installation issues with Adobe Reader 9
I am having problems downloading and installing Adobe Reader 9. When I ask it to download I get an error message saying "URL not allowed! (15219.305.68)". Sometimes it will continue to download after clicking OK and other times it will not download a
-
ABAP objects - what a headache!!!
Howdy, Objects is really getting me down. I had a program that worked really nicely when I'd created the classes locally within the program. Now I've created the class globally via SE24 and whenever I try to run the program I get a dump beacuse of a
-
Transfer adobe premiere program from pc to man
Hi all, i have adobe premiere as well as photoshop, after effects and a bunch of other adobe programs. My question is, i will be buying a 27" imac soon and wanted to know, could i transfer the programs i have for pc onto mac? i know you can transfer
-
I have a blackberry curve 8520 and my cellphone provider is Cell C Yesterday my phone went off. Normally i then take the battery out to reload It now wont reload. it sits on the loading for a second then goes off. it keeps doing this since yesterday